Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [PATCH 1/2] DTPMOD mod fix for musl's rcrt0
@ 2017-12-14 10:57 Arvid E. Picciani
  2017-12-14 10:57 ` [Buildroot] [PATCH 2/2] enable static linking for libfuse Arvid E. Picciani
  2017-12-14 14:19 ` [Buildroot] [PATCH 1/2] DTPMOD mod fix for musl's rcrt0 Thomas Petazzoni
  0 siblings, 2 replies; 11+ messages in thread
From: Arvid E. Picciani @ 2017-12-14 10:57 UTC (permalink / raw)
  To: buildroot

See https://github.com/rust-lang/rust/issues/46566

Signed-off-by: Arvid E. Picciani <aep@exys.org>
---
 package/musl/0002-fix-rcrt1.o.patch | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 package/musl/0002-fix-rcrt1.o.patch

diff --git a/package/musl/0002-fix-rcrt1.o.patch b/package/musl/0002-fix-rcrt1.o.patch
new file mode 100644
index 0000000000..3dae65569f
--- /dev/null
+++ b/package/musl/0002-fix-rcrt1.o.patch
@@ -0,0 +1,26 @@
+diff --git a/ldso/dlstart.c b/ldso/dlstart.c
+index 4dbe178..0dd1d5a 100644
+--- a/ldso/dlstart.c
++++ b/ldso/dlstart.c
+@@ -128,16 +128,18 @@ void _dlstart_c(size_t *sp, size_t *dynv)
+ 	rel = (void *)(base+dyn[DT_REL]);
+ 	rel_size = dyn[DT_RELSZ];
+ 	for (; rel_size; rel+=2, rel_size-=2*sizeof(size_t)) {
+-		if (!IS_RELATIVE(rel[1], 0)) continue;
+ 		size_t *rel_addr = (void *)(base + rel[0]);
++		if (rel[1] == REL_DTPMOD) *rel_addr = 1;
++		if (!IS_RELATIVE(rel[1], 0)) continue;
+ 		*rel_addr += base;
+ 	}
+ 
+ 	rel = (void *)(base+dyn[DT_RELA]);
+ 	rel_size = dyn[DT_RELASZ];
+ 	for (; rel_size; rel+=3, rel_size-=3*sizeof(size_t)) {
+-		if (!IS_RELATIVE(rel[1], 0)) continue;
+ 		size_t *rel_addr = (void *)(base + rel[0]);
++		if (rel[1] == REL_DTPMOD) *rel_addr = 1;
++		if (!IS_RELATIVE(rel[1], 0)) continue;
+ 		*rel_addr = base + rel[2];
+ 	}
+ #endif
+
-- 
2.15.1

^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] enable static linking for libfuse
  2017-12-14 10:57 [Buildroot] [PATCH 1/2] DTPMOD mod fix for musl's rcrt0 Arvid E. Picciani
@ 2017-12-14 10:57 ` Arvid E. Picciani
  2017-12-14 15:21   ` Thomas Petazzoni
  2017-12-14 14:19 ` [Buildroot] [PATCH 1/2] DTPMOD mod fix for musl's rcrt0 Thomas Petazzoni
  1 sibling, 1 reply; 11+ messages in thread
From: Arvid E. Picciani @ 2017-12-14 10:57 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Arvid E. Picciani <aep@exys.org>
---
 package/libfuse/Config.in  | 4 ----
 package/libfuse/libfuse.mk | 3 ++-
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/package/libfuse/Config.in b/package/libfuse/Config.in
index 2b0e31a991..62b18c2444 100644
--- a/package/libfuse/Config.in
+++ b/package/libfuse/Config.in
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_LIBFUSE
 	bool "libfuse"
 	# Really doesn't like static, see fuse/lib/fuse.c
-	depends on !BR2_STATIC_LIBS
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_USE_MMU # fork()
 	help
@@ -9,6 +8,3 @@ config BR2_PACKAGE_LIBFUSE
 
 	  https://github.com/libfuse/libfuse
 
-comment "libfuse needs a toolchain w/ threads, dynamic library"
-	depends on BR2_USE_MMU
-	depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS
diff --git a/package/libfuse/libfuse.mk b/package/libfuse/libfuse.mk
index dc177d03c1..570390ca76 100644
--- a/package/libfuse/libfuse.mk
+++ b/package/libfuse/libfuse.mk
@@ -12,13 +12,14 @@ LIBFUSE_LICENSE_FILES = COPYING COPYING.LIB
 LIBFUSE_INSTALL_STAGING = YES
 LIBFUSE_DEPENDENCIES = $(if $(BR2_PACKAGE_LIBICONV),libiconv)
 LIBFUSE_CONF_OPTS = \
+	--enable-static \
 	--disable-example \
 	--enable-lib \
 	--enable-util
 
 define LIBFUSE_INSTALL_TARGET_CMDS
 	cp -dpf $(STAGING_DIR)/usr/bin/fusermount $(TARGET_DIR)/usr/bin/
-	cp -dpf $(STAGING_DIR)/usr/lib/libfuse.so* $(TARGET_DIR)/usr/lib/
+	cp -dpf $(STAGING_DIR)/usr/lib/libfuse.a* $(TARGET_DIR)/usr/lib/
 endef
 
 $(eval $(autotools-package))
-- 
2.15.1

^ permalink raw reply related	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 1/2] DTPMOD mod fix for musl's rcrt0
  2017-12-14 10:57 [Buildroot] [PATCH 1/2] DTPMOD mod fix for musl's rcrt0 Arvid E. Picciani
  2017-12-14 10:57 ` [Buildroot] [PATCH 2/2] enable static linking for libfuse Arvid E. Picciani
@ 2017-12-14 14:19 ` Thomas Petazzoni
  1 sibling, 0 replies; 11+ messages in thread
From: Thomas Petazzoni @ 2017-12-14 14:19 UTC (permalink / raw)
  To: buildroot

Hello,

Thanks for your contribution!

On Thu, 14 Dec 2017 11:57:05 +0100, Arvid E. Picciani wrote:
> See https://github.com/rust-lang/rust/issues/46566
> 
> Signed-off-by: Arvid E. Picciani <aep@exys.org>
> ---
>  package/musl/0002-fix-rcrt1.o.patch | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 package/musl/0002-fix-rcrt1.o.patch
> 
> diff --git a/package/musl/0002-fix-rcrt1.o.patch b/package/musl/0002-fix-rcrt1.o.patch
> new file mode 100644
> index 0000000000..3dae65569f
> --- /dev/null
> +++ b/package/musl/0002-fix-rcrt1.o.patch

All patches need a description and a Signed-off-by. Also is this patch
in upstream musl? Has it been submitted?

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] enable static linking for libfuse
  2017-12-14 10:57 ` [Buildroot] [PATCH 2/2] enable static linking for libfuse Arvid E. Picciani
@ 2017-12-14 15:21   ` Thomas Petazzoni
  2017-12-14 15:27     ` Arvid Picciani
  0 siblings, 1 reply; 11+ messages in thread
From: Thomas Petazzoni @ 2017-12-14 15:21 UTC (permalink / raw)
  To: buildroot

Hello,

Thanks for your contribution. However...

On Thu, 14 Dec 2017 11:57:06 +0100, Arvid E. Picciani wrote:
> Signed-off-by: Arvid E. Picciani <aep@exys.org>
> ---
>  package/libfuse/Config.in  | 4 ----
>  package/libfuse/libfuse.mk | 3 ++-
>  2 files changed, 2 insertions(+), 5 deletions(-)
> 
> diff --git a/package/libfuse/Config.in b/package/libfuse/Config.in
> index 2b0e31a991..62b18c2444 100644
> --- a/package/libfuse/Config.in
> +++ b/package/libfuse/Config.in
> @@ -1,7 +1,6 @@
>  config BR2_PACKAGE_LIBFUSE
>  	bool "libfuse"
>  	# Really doesn't like static, see fuse/lib/fuse.c

...did you see this comment?

fuse.c uses dlopen(), this requires shared library support.

Apply your patch, and build the following configuration:

BR2_arm=y
BR2_STATIC_LIBS=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-static-2017.11-rc1.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_6=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
# BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG is not set
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
BR2_PACKAGE_LIBFUSE=y
# BR2_TARGET_ROOTFS_TAR is not set

You'll get the following build failure:

fuse.c:33:19: fatal error: dlfcn.h: No such file or directory
 #include <dlfcn.h>
                   ^
compilation terminated.

Also, passing --enable-static is not necessary, this is already done by
the autotools-package infrastructure when BR2_STATIC_LIBS=y.

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] enable static linking for libfuse
  2017-12-14 15:21   ` Thomas Petazzoni
@ 2017-12-14 15:27     ` Arvid Picciani
  2017-12-14 15:52       ` Thomas Petazzoni
  2017-12-15 13:07       ` Stefan Fröberg
  0 siblings, 2 replies; 11+ messages in thread
From: Arvid Picciani @ 2017-12-14 15:27 UTC (permalink / raw)
  To: buildroot

thanks for checking.
yes i did see the comment that's why i didnt submit a proper patch but more
an RFC.
It builds fine for me. maybe it doesn't try to use the dlopen stuff with
musl?


On Thu, Dec 14, 2017 at 4:21 PM, Thomas Petazzoni <
thomas.petazzoni@free-electrons.com> wrote:

> Hello,
>
> Thanks for your contribution. However...
>
> On Thu, 14 Dec 2017 11:57:06 +0100, Arvid E. Picciani wrote:
> > Signed-off-by: Arvid E. Picciani <aep@exys.org>
> > ---
> >  package/libfuse/Config.in  | 4 ----
> >  package/libfuse/libfuse.mk | 3 ++-
> >  2 files changed, 2 insertions(+), 5 deletions(-)
> >
> > diff --git a/package/libfuse/Config.in b/package/libfuse/Config.in
> > index 2b0e31a991..62b18c2444 100644
> > --- a/package/libfuse/Config.in
> > +++ b/package/libfuse/Config.in
> > @@ -1,7 +1,6 @@
> >  config BR2_PACKAGE_LIBFUSE
> >       bool "libfuse"
> >       # Really doesn't like static, see fuse/lib/fuse.c
>
> ...did you see this comment?
>
> fuse.c uses dlopen(), this requires shared library support.
>
> Apply your patch, and build the following configuration:
>
> BR2_arm=y
> BR2_STATIC_LIBS=y
> BR2_TOOLCHAIN_EXTERNAL=y
> BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
> BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/
> toolchains/tarballs/br-arm-full-static-2017.11-rc1.tar.bz2"
> BR2_TOOLCHAIN_EXTERNAL_GCC_6=y
> BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
> BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
> # BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG is not set
> BR2_TOOLCHAIN_EXTERNAL_CXX=y
> BR2_INIT_NONE=y
> BR2_SYSTEM_BIN_SH_NONE=y
> # BR2_PACKAGE_BUSYBOX is not set
> BR2_PACKAGE_LIBFUSE=y
> # BR2_TARGET_ROOTFS_TAR is not set
>
> You'll get the following build failure:
>
> fuse.c:33:19: fatal error: dlfcn.h: No such file or directory
>  #include <dlfcn.h>
>                    ^
> compilation terminated.
>
> Also, passing --enable-static is not necessary, this is already done by
> the autotools-package infrastructure when BR2_STATIC_LIBS=y.
>
> Best regards,
>
> Thomas
> --
> Thomas Petazzoni, CTO, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20171214/0ba423a7/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config
Type: application/octet-stream
Size: 77278 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20171214/0ba423a7/attachment.obj>

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] enable static linking for libfuse
  2017-12-14 15:27     ` Arvid Picciani
@ 2017-12-14 15:52       ` Thomas Petazzoni
  2017-12-15 13:12         ` Stefan Fröberg
  2017-12-15 13:07       ` Stefan Fröberg
  1 sibling, 1 reply; 11+ messages in thread
From: Thomas Petazzoni @ 2017-12-14 15:52 UTC (permalink / raw)
  To: buildroot

Hello,

On Thu, 14 Dec 2017 16:27:36 +0100, Arvid Picciani wrote:

> yes i did see the comment that's why i didnt submit a proper patch but more
> an RFC.
> It builds fine for me. maybe it doesn't try to use the dlopen stuff with
> musl?

I guess musl always has dlopen(), even in a purely statically linked
scenario, while uClibc does not have it.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] enable static linking for libfuse
  2017-12-14 15:27     ` Arvid Picciani
  2017-12-14 15:52       ` Thomas Petazzoni
@ 2017-12-15 13:07       ` Stefan Fröberg
       [not found]         ` <CABukmmN5UjdWupf_8zuCkx13tuNVFxeD9AOE=cemfQ_Soe1AUQ@mail.gmail.com>
  1 sibling, 1 reply; 11+ messages in thread
From: Stefan Fröberg @ 2017-12-15 13:07 UTC (permalink / raw)
  To: buildroot

Hi Arvid


Arvid Picciani kirjoitti 14.12.2017 klo 17:27:
> thanks for checking.
> yes i did see the comment that's why i didnt submit a proper patch but
> more an RFC.
> It builds fine for me. maybe it doesn't try to use the dlopen stuff
> with musl?
>

Just out of interest:? do you also have the following static musl
libraries with size 8 bytes and
content just "!<arch>" and nothing more :
libcrypt,a libdl.a libm.a libpthread.a libresolv.a librt.a libutil.a
libxnet.a

Musl seems to stuff all their stuff into libc.a when using static linking?

I am asking this because I have dlopen problem with static linking
Python on musl.
(or actually, I can build Python completely statically against musl just
fine if I disable the dlopen part but that will
also disable pip and setuptools support)


-S-


>
> On Thu, Dec 14, 2017 at 4:21 PM, Thomas Petazzoni
> <thomas.petazzoni@free-electrons.com
> <mailto:thomas.petazzoni@free-electrons.com>> wrote:
>
>     Hello,
>
>     Thanks for your contribution. However...
>
>     On Thu, 14 Dec 2017 11:57:06 +0100, Arvid E. Picciani wrote:
>     > Signed-off-by: Arvid E. Picciani <aep@exys.org
>     <mailto:aep@exys.org>>
>     > ---
>     >? package/libfuse/Config.in? | 4 ----
>     >? package/libfuse/libfuse.mk <http://libfuse.mk> | 3 ++-
>     >? 2 files changed, 2 insertions(+), 5 deletions(-)
>     >
>     > diff --git a/package/libfuse/Config.in b/package/libfuse/Config.in
>     > index 2b0e31a991..62b18c2444 100644
>     > --- a/package/libfuse/Config.in
>     > +++ b/package/libfuse/Config.in
>     > @@ -1,7 +1,6 @@
>     >? config BR2_PACKAGE_LIBFUSE
>     >? ? ? ?bool "libfuse"
>     >? ? ? ?# Really doesn't like static, see fuse/lib/fuse.c
>
>     ...did you see this comment?
>
>     fuse.c uses dlopen(), this requires shared library support.
>
>     Apply your patch, and build the following configuration:
>
>     BR2_arm=y
>     BR2_STATIC_LIBS=y
>     BR2_TOOLCHAIN_EXTERNAL=y
>     BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
>     BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-static-2017.11-rc1.tar.bz2
>     <http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-static-2017.11-rc1.tar.bz2>"
>     BR2_TOOLCHAIN_EXTERNAL_GCC_6=y
>     BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
>     BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
>     # BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG is not set
>     BR2_TOOLCHAIN_EXTERNAL_CXX=y
>     BR2_INIT_NONE=y
>     BR2_SYSTEM_BIN_SH_NONE=y
>     # BR2_PACKAGE_BUSYBOX is not set
>     BR2_PACKAGE_LIBFUSE=y
>     # BR2_TARGET_ROOTFS_TAR is not set
>
>     You'll get the following build failure:
>
>     fuse.c:33:19: fatal error: dlfcn.h: No such file or directory
>     ?#include <dlfcn.h>
>     ? ? ? ? ? ? ? ? ? ?^
>     compilation terminated.
>
>     Also, passing --enable-static is not necessary, this is already
>     done by
>     the autotools-package infrastructure when BR2_STATIC_LIBS=y.
>
>     Best regards,
>
>     Thomas
>     --
>     Thomas Petazzoni, CTO, Free Electrons
>     Embedded Linux and Kernel engineering
>     http://free-electrons.com
>
>
>
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20171215/2f508195/attachment.html>

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] enable static linking for libfuse
  2017-12-14 15:52       ` Thomas Petazzoni
@ 2017-12-15 13:12         ` Stefan Fröberg
  2017-12-15 13:22           ` Stefan Fröberg
  2017-12-15 14:10           ` Thomas Petazzoni
  0 siblings, 2 replies; 11+ messages in thread
From: Stefan Fröberg @ 2017-12-15 13:12 UTC (permalink / raw)
  To: buildroot

Hi Thomas


Thomas Petazzoni kirjoitti 14.12.2017 klo 17:52:
> Hello,
>
> On Thu, 14 Dec 2017 16:27:36 +0100, Arvid Picciani wrote:
>
>> yes i did see the comment that's why i didnt submit a proper patch but more
>> an RFC.
>> It builds fine for me. maybe it doesn't try to use the dlopen stuff with
>> musl?
> I guess musl always has dlopen(), even in a purely statically linked
> scenario, while uClibc does not have it.
>
> Thomas

But doesn't static glibc also use dlopen() ?

-S-

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] enable static linking for libfuse
  2017-12-15 13:12         ` Stefan Fröberg
@ 2017-12-15 13:22           ` Stefan Fröberg
  2017-12-15 14:10           ` Thomas Petazzoni
  1 sibling, 0 replies; 11+ messages in thread
From: Stefan Fröberg @ 2017-12-15 13:22 UTC (permalink / raw)
  To: buildroot

Ah, found this from 2012:

http://openwall.com/lists/musl/2012/12/08/4

So for statically linked musl (and uclibc) dlopen is no no

-S-


Stefan Fr?berg kirjoitti 15.12.2017 klo 15:12:
> Hi Thomas
>
>
> Thomas Petazzoni kirjoitti 14.12.2017 klo 17:52:
>> Hello,
>>
>> On Thu, 14 Dec 2017 16:27:36 +0100, Arvid Picciani wrote:
>>
>>> yes i did see the comment that's why i didnt submit a proper patch but more
>>> an RFC.
>>> It builds fine for me. maybe it doesn't try to use the dlopen stuff with
>>> musl?
>> I guess musl always has dlopen(), even in a purely statically linked
>> scenario, while uClibc does not have it.
>>
>> Thomas
> But doesn't static glibc also use dlopen() ?
>
> -S-
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] enable static linking for libfuse
  2017-12-15 13:12         ` Stefan Fröberg
  2017-12-15 13:22           ` Stefan Fröberg
@ 2017-12-15 14:10           ` Thomas Petazzoni
  1 sibling, 0 replies; 11+ messages in thread
From: Thomas Petazzoni @ 2017-12-15 14:10 UTC (permalink / raw)
  To: buildroot

Hello,

On Fri, 15 Dec 2017 15:12:41 +0200, Stefan Fr?berg wrote:

> > I guess musl always has dlopen(), even in a purely statically linked
> > scenario, while uClibc does not have it.
> >
> > Thomas  
> 
> But doesn't static glibc also use dlopen() ?

We don't support glibc with BR2_STATIC_LIBS=y.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 11+ messages in thread
* [Buildroot] [PATCH 2/2] enable static linking for libfuse
       [not found]         ` <CABukmmN5UjdWupf_8zuCkx13tuNVFxeD9AOE=cemfQ_Soe1AUQ@mail.gmail.com>
@ 2017-12-18  6:25           ` Thomas Petazzoni
  0 siblings, 0 replies; 11+ messages in thread
From: Thomas Petazzoni @ 2017-12-18  6:25 UTC (permalink / raw)
  To: buildroot

Hello,

On Sun, 17 Dec 2017 17:42:36 +0100, A EP wrote:
> yeah that's intentional. musl doesn't actually have separate libs. the
> empty libraries are just for compatibility.
> 
> i don't think dlopen actually works in static musl, it might just return 0.
> libfuse works fine for me, because it only uses dlopen for exotic modules
> stuff.

Then if you want to be able to have support for libfuse in static
builds in Buildroot, libfuse should only conditionally use dlopen(), if
available.

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

^ permalink raw reply	[flat|nested] 11+ messages in thread
end of thread, other threads:[~2017-12-18  6:25 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-14 10:57 [Buildroot] [PATCH 1/2] DTPMOD mod fix for musl's rcrt0 Arvid E. Picciani
2017-12-14 10:57 ` [Buildroot] [PATCH 2/2] enable static linking for libfuse Arvid E. Picciani
2017-12-14 15:21   ` Thomas Petazzoni
2017-12-14 15:27     ` Arvid Picciani
2017-12-14 15:52       ` Thomas Petazzoni
2017-12-15 13:12         ` Stefan Fröberg
2017-12-15 13:22           ` Stefan Fröberg
2017-12-15 14:10           ` Thomas Petazzoni
2017-12-15 13:07       ` Stefan Fröberg
     [not found]         ` <CABukmmN5UjdWupf_8zuCkx13tuNVFxeD9AOE=cemfQ_Soe1AUQ@mail.gmail.com>
2017-12-18  6:25           ` Thomas Petazzoni
2017-12-14 14:19 ` [Buildroot] [PATCH 1/2] DTPMOD mod fix for musl's rcrt0 Thomas Petazzoni

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox