From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] package/brltty: fix cross-compilation
Date: Wed, 22 Aug 2018 22:05:12 +0200 [thread overview]
Message-ID: <20180822200512.GF2404@scaer> (raw)
In-Reply-To: <20180822100415.dl7h3xvaahwtngut@sapphire.tkos.co.il>
Bruch, All,
On 2018-08-22 13:04 +0300, Baruch Siach spake thusly:
> On Wed, Aug 22, 2018 at 10:28:32AM +0200, Yann E. MORIN wrote:
> > brltty has a very inventive buildsystem, where it internall runs
> > ./configure for the build machine In doing so, it generates a list
> > of make variables to define what the build machine supports, like
> > it does for the target.
> >
> > However, the build variables are generated with a convoluted sed
> > script that scans the target list, and appends _FOR_BUILD to each
> > target variables. Then, both lists are included from the Makefile,
> > on the assumption that the build variables will not clash with the
> > target variables.
> >
> > Where it gets interesting, is that that sed script considers the
> > variables names to match '[A-Za-z][A-Za-z0-9_]*'
> >
> > And there we see why ATSPI2_PACKAGE does not match: it contains a
> > digit.
> >
> > So, some build variables will inevitably override target ones.
> >
> > Fix that by simply expanding the matching regexp to allow digits
> > in variable names.
>
> Thanks for fixing that.
>
> Do you have any idea why it only fails on specific (older?) hosts? Does it
> depend on the sed version?
I don;t know what the difference is. The sed version is probably not the
culprit, because the generated file is the same on a working or on a
failing system.
So, I believe I fixed the real problem, but I dont know why it sometimes
did not manifest itself on some systems, while it was visible on
others...
Regards,
Yann E. MORIN.
> baruch
>
> > Fixes:
> > http://autobuild.buildroot.org/results/a37/a37782b3cfc1a96cc129db8fade20a36a7b2d470/
> > http://autobuild.buildroot.org/results/97e/97edc6a47d2140968e84b409cdc960604e5896f2/
> >
> > Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> > Cc: Mario Lang <mlang@blind.guru>
> > Cc: Baruch Siach <baruch@tkos.co.il>
> > ---
> > .../0004-buildsys-fix-cross-compilation.patch | 41 ++++++++++++++++++++++
> > 1 file changed, 41 insertions(+)
> > create mode 100644 package/brltty/0004-buildsys-fix-cross-compilation.patch
> >
> > diff --git a/package/brltty/0004-buildsys-fix-cross-compilation.patch b/package/brltty/0004-buildsys-fix-cross-compilation.patch
> > new file mode 100644
> > index 0000000000..9a10d46414
> > --- /dev/null
> > +++ b/package/brltty/0004-buildsys-fix-cross-compilation.patch
> > @@ -0,0 +1,41 @@
> > +From 088666535a045dae71bd2fcc6b3a1553023106ce Mon Sep 17 00:00:00 2001
> > +From: "Yann E. MORIN" <yann.morin.1998@free.fr>
> > +Date: Wed, 22 Aug 2018 10:10:19 +0200
> > +Subject: [PATCH] buildsys: fix cross-compilation
> > +
> > +Some identifiers for includes and libs paths may contain digit, e.g.
> > +X11_PACKAGE or ATSPI2_PACKAGE or GLIB2_PACKAGE...
> > +
> > +Also detect those identifiers when doing cros-compilation, so that the
> > +_FOR_BUILD variants are really created and do not clash with the target
> > +variants.
> > +
> > +Fixes:
> > + http://autobuild.buildroot.org/results/a37/a37782b3cfc1a96cc129db8fade20a36a7b2d470/build-end.log
> > + http://autobuild.buildroot.org/results/97e/97edc6a47d2140968e84b409cdc960604e5896f2/build-end.log
> > + [...]
> > +
> > +Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> > +---
> > +Upstram status: submitted
> > +https://github.com/brltty/brltty/pull/142
> > +---
> > + mk4build | 2 +-
> > + 1 file changed, 1 insertion(+), 1 deletion(-)
> > +
> > +diff --git a/mk4build b/mk4build
> > +index db90c86a9..551283825 100755
> > +--- a/mk4build
> > ++++ b/mk4build
> > +@@ -112,7 +112,7 @@ fi
> > +
> > + sedScript="${outputName}.${sedExtension}"
> > + sed -n -e '
> > +-s/^ *\([A-Za-z][A-Za-z_]*\) *=.*$/\1/
> > ++s/^ *\([A-Za-z][A-Za-z0-9_]*\) *=.*$/\1/
> > + t found
> > + d
> > + :found
>
> --
> http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
> - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2018-08-22 20:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-22 8:28 [Buildroot] [PATCH] package/brltty: fix cross-compilation Yann E. MORIN
2018-08-22 10:04 ` Baruch Siach
2018-08-22 20:05 ` Yann E. MORIN [this message]
2018-08-22 10:12 ` Mario Lang
2018-08-22 15:34 ` Yann E. MORIN
2018-08-22 18:01 ` Peter Seiderer
2018-08-22 20:02 ` Yann E. MORIN
2018-08-25 12:40 ` Thomas Petazzoni
2018-08-26 21:23 ` Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180822200512.GF2404@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox