[Buildroot] [PATCH 1/4] uboot: bump to version 2018.09

[Buildroot] [PATCH 1/4] uboot: bump to version 2018.09

[Jagan Teki]

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 boot/uboot/Config.in  | 4 ++--
 boot/uboot/uboot.hash | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/boot/uboot/Config.in b/boot/uboot/Config.in
index 9e40c11fa1..ac6f8bc8c1 100644
--- a/boot/uboot/Config.in
+++ b/boot/uboot/Config.in
@@ -39,7 +39,7 @@ choice
 	  Select the specific U-Boot version you want to use
 
 config BR2_TARGET_UBOOT_LATEST_VERSION
-	bool "2018.07"
+	bool "2018.09"
 
 config BR2_TARGET_UBOOT_CUSTOM_VERSION
 	bool "Custom version"
@@ -87,7 +87,7 @@ endif
 
 config BR2_TARGET_UBOOT_VERSION
 	string
-	default "2018.07"	if BR2_TARGET_UBOOT_LATEST_VERSION
+	default "2018.09"	if BR2_TARGET_UBOOT_LATEST_VERSION
 	default BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE \
 		if BR2_TARGET_UBOOT_CUSTOM_VERSION
 	default "custom"	if BR2_TARGET_UBOOT_CUSTOM_TARBALL
diff --git a/boot/uboot/uboot.hash b/boot/uboot/uboot.hash
index 97d0bd0b5f..ea07fb584d 100644
--- a/boot/uboot/uboot.hash
+++ b/boot/uboot/uboot.hash
@@ -1,2 +1,2 @@
 # Locally computed:
-sha256  9f10df88bc91b35642e461217f73256bbaeeca9ae2db8db56197ba5e89e1f6d4  u-boot-2018.07.tar.bz2
+sha256  839bf23cfe8ce613a77e583a60375179d0ad324e92c82fbdd07bebf0fd142268  u-boot-2018.09.tar.bz2
-- 
2.18.0.321.gffc6fa0e3

[Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support

[Jagan Teki]

Add initial support for Orangepi One Plus board
with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- Use mainline u-boot
- Use tag in Linux

 .gitlab-ci.yml                                |  1 +
 DEVELOPERS                                    |  2 +
 .../orangepi/orangepi-one-plus/extlinux.conf  |  4 ++
 board/orangepi/orangepi-one-plus/genimage.cfg | 33 +++++++++++++
 .../orangepi/orangepi-one-plus/post-build.sh  |  4 ++
 board/orangepi/orangepi-one-plus/readme.txt   | 37 +++++++++++++++
 configs/orangepi_one_plus_defconfig           | 46 +++++++++++++++++++
 7 files changed, 127 insertions(+)
 create mode 100644 board/orangepi/orangepi-one-plus/extlinux.conf
 create mode 100644 board/orangepi/orangepi-one-plus/genimage.cfg
 create mode 100755 board/orangepi/orangepi-one-plus/post-build.sh
 create mode 100644 board/orangepi/orangepi-one-plus/readme.txt
 create mode 100644 configs/orangepi_one_plus_defconfig

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 8b9a1f175c..f670e3dbb7 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -185,6 +185,7 @@ olimex_imx233_olinuxino_defconfig: *defconfig
 openblocks_a6_defconfig: *defconfig
 orangepi_lite_defconfig: *defconfig
 orangepi_one_defconfig: *defconfig
+orangepi_one_plus_defconfig: *defconfig
 orangepi_pc2_defconfig: *defconfig
 orangepi_pc_defconfig: *defconfig
 orangepi_pc_plus_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index a3d97eb390..401e0cb770 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -954,6 +954,7 @@ F:	board/engicam/
 F:	board/friendlyarm/nanopi-a64/
 F:	board/friendlyarm/nanopi-neo2/
 F:	board/olimex/a64-olinuxino/
+F:	board/orangepi/orangepi-one-plus
 F:	board/orangepi/orangepi-pc2/
 F:	board/orangepi/orangepi-prime/
 F:	board/orangepi/orangepi-win/
@@ -971,6 +972,7 @@ F:	configs/engicam_imx6ul_isiot_defconfig
 F:	configs/friendlyarm_nanopi_a64_defconfig
 F:	configs/friendlyarm_nanopi_neo2_defconfig
 F:	configs/olimex_a64_olinuxino_defconfig
+F:	configs/orangepi_one_plus_defconfig
 F:	configs/orangepi_pc2_defconfig
 F:	configs/orangepi_prime_defconfig
 F:	configs/orangepi_win_defconfig
diff --git a/board/orangepi/orangepi-one-plus/extlinux.conf b/board/orangepi/orangepi-one-plus/extlinux.conf
new file mode 100644
index 0000000000..eae328449c
--- /dev/null
+++ b/board/orangepi/orangepi-one-plus/extlinux.conf
@@ -0,0 +1,4 @@
+label linux-4.18.0-rc3
+  kernel /Image
+  devicetree /sun50i-h6-orangepi-one-plus.dtb
+  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
diff --git a/board/orangepi/orangepi-one-plus/genimage.cfg b/board/orangepi/orangepi-one-plus/genimage.cfg
new file mode 100644
index 0000000000..ebb07e8b26
--- /dev/null
+++ b/board/orangepi/orangepi-one-plus/genimage.cfg
@@ -0,0 +1,33 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"sun50i-h6-orangepi-one-plus.dtb",
+			"extlinux"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8192
+		size = 1040384 # 1MB - 8192
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/orangepi/orangepi-one-plus/post-build.sh b/board/orangepi/orangepi-one-plus/post-build.sh
new file mode 100755
index 0000000000..ec20fca7d9
--- /dev/null
+++ b/board/orangepi/orangepi-one-plus/post-build.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/orangepi/orangepi-one-plus/readme.txt b/board/orangepi/orangepi-one-plus/readme.txt
new file mode 100644
index 0000000000..87f6de8510
--- /dev/null
+++ b/board/orangepi/orangepi-one-plus/readme.txt
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi One Plus. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi One Plus link:
+http://www.orangepi.org/OrangePiOneplus/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+One+Plus
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+    $ make orangepi_one_plus_defconfig
+    $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+  $ sudo sync
+
+Insert the micro SDcard in your Orangepi One Plus and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig
new file mode 100644
index 0000000000..d950f16610
--- /dev/null
+++ b/configs/orangepi_one_plus_defconfig
@@ -0,0 +1,46 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.18 series
+BR2_KERNEL_HEADERS_4_18=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.09"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_one_plus"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,h6-v1.0b)/linux-amarula_h6-v1.0b.tar.gz"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-orangepi-one-plus"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi One+"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-one-plus/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-one-plus/post-build.sh"
-- 
2.18.0.321.gffc6fa0e3

[Buildroot] [PATCH 3/4] board: orangepi: Add Orangepi Lite2 support

[Jagan Teki]

Add initial support for Orangepi Lite2 board
with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 .gitlab-ci.yml                              |  1 +
 DEVELOPERS                                  |  2 +
 board/orangepi/orangepi-lite2/extlinux.conf |  4 ++
 board/orangepi/orangepi-lite2/genimage.cfg  | 33 +++++++++++++++
 board/orangepi/orangepi-lite2/post-build.sh |  4 ++
 board/orangepi/orangepi-lite2/readme.txt    | 35 +++++++++++++++
 configs/orangepi_lite2_defconfig            | 47 +++++++++++++++++++++
 7 files changed, 126 insertions(+)
 create mode 100644 board/orangepi/orangepi-lite2/extlinux.conf
 create mode 100644 board/orangepi/orangepi-lite2/genimage.cfg
 create mode 100755 board/orangepi/orangepi-lite2/post-build.sh
 create mode 100644 board/orangepi/orangepi-lite2/readme.txt
 create mode 100644 configs/orangepi_lite2_defconfig

diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index f670e3dbb7..ad077c84f3 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -184,6 +184,7 @@ olimex_a64_olinuxino_defconfig: *defconfig
 olimex_imx233_olinuxino_defconfig: *defconfig
 openblocks_a6_defconfig: *defconfig
 orangepi_lite_defconfig: *defconfig
+orangepi_lite2_defconfig: *defconfig
 orangepi_one_defconfig: *defconfig
 orangepi_one_plus_defconfig: *defconfig
 orangepi_pc2_defconfig: *defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 401e0cb770..497b18e396 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -954,6 +954,7 @@ F:	board/engicam/
 F:	board/friendlyarm/nanopi-a64/
 F:	board/friendlyarm/nanopi-neo2/
 F:	board/olimex/a64-olinuxino/
+F:	board/orangepi/orangepi-lite2/
 F:	board/orangepi/orangepi-one-plus
 F:	board/orangepi/orangepi-pc2/
 F:	board/orangepi/orangepi-prime/
@@ -972,6 +973,7 @@ F:	configs/engicam_imx6ul_isiot_defconfig
 F:	configs/friendlyarm_nanopi_a64_defconfig
 F:	configs/friendlyarm_nanopi_neo2_defconfig
 F:	configs/olimex_a64_olinuxino_defconfig
+F:	configs/orangepi_lite2_defconfig
 F:	configs/orangepi_one_plus_defconfig
 F:	configs/orangepi_pc2_defconfig
 F:	configs/orangepi_prime_defconfig
diff --git a/board/orangepi/orangepi-lite2/extlinux.conf b/board/orangepi/orangepi-lite2/extlinux.conf
new file mode 100644
index 0000000000..610e864373
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/extlinux.conf
@@ -0,0 +1,4 @@
+label linux-4.18.0-rc3
+  kernel /Image
+  devicetree /sun50i-h6-orangepi-lite2.dtb
+  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
diff --git a/board/orangepi/orangepi-lite2/genimage.cfg b/board/orangepi/orangepi-lite2/genimage.cfg
new file mode 100644
index 0000000000..97251b483f
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/genimage.cfg
@@ -0,0 +1,33 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"sun50i-h6-orangepi-lite2.dtb",
+			"extlinux"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8192
+		size = 1040384 # 1MB - 8192
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/orangepi/orangepi-lite2/post-build.sh b/board/orangepi/orangepi-lite2/post-build.sh
new file mode 100755
index 0000000000..ec20fca7d9
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/post-build.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/orangepi/orangepi-lite2/readme.txt b/board/orangepi/orangepi-lite2/readme.txt
new file mode 100644
index 0000000000..abca9da6da
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/readme.txt
@@ -0,0 +1,35 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi Lite2. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi Lite2 link:
+http://www.orangepi.org/Orange%20Pi%20Lite%202/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2
+
+How to build
+============
+
+    $ make orangepi_lite2_defconfig
+    $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+  $ sudo sync
+
+Insert the micro SDcard in your Orangepi Lite2 and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig
new file mode 100644
index 0000000000..29e648c9b0
--- /dev/null
+++ b/configs/orangepi_lite2_defconfig
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.18 series
+BR2_KERNEL_HEADERS_4_18=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h6"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="h6-v1.0a"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_lite2"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,h6-v1.0b)/linux-amarula_h6-v1.0b.tar.gz"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h6-orangepi-lite2"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Lite2"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-lite2/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-lite2/post-build.sh"
-- 
2.18.0.321.gffc6fa0e3

[Buildroot] [PATCH 4/4] board: orangepi: lite2: Add WiFi support

[Jagan Teki]

Orangepi lite2 board has AP6356S WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add broadcom wireless firmware package to image
- add basic wireless tools to image
- add rootfs overlay with proper NVRAM file for on-board AP6356S chip
- add mdev to image to enable module autoloading
- update readme.txt to test wifi

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 board/orangepi/orangepi-lite2/readme.txt      |  9 ++
 .../lib/firmware/brcm/brcmfmac43455-sdio.txt  | 82 +++++++++++++++++++
 configs/orangepi_lite2_defconfig              | 13 +++
 3 files changed, 104 insertions(+)
 create mode 100755 board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt

diff --git a/board/orangepi/orangepi-lite2/readme.txt b/board/orangepi/orangepi-lite2/readme.txt
index abca9da6da..bed561b562 100644
--- a/board/orangepi/orangepi-lite2/readme.txt
+++ b/board/orangepi/orangepi-lite2/readme.txt
@@ -33,3 +33,12 @@ Copy the bootable "sdcard.img" onto an SD card with "dd":
 
 Insert the micro SDcard in your Orangepi Lite2 and power it up. The console
 is on the serial line, 115200 8N1.
+
+WiFi
+====
+
+ # wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
+   (type password and enter)
+ # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
+ # udhcpc -i wlan0
+ # ping google.com
diff --git a/board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt b/board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt
new file mode 100755
index 0000000000..c1cc4c3c2e
--- /dev/null
+++ b/board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt
@@ -0,0 +1,82 @@
+#AP6255_NVRAM_V1.0_29052015
+
+NVRAMRev=$Rev: 498373 $
+sromrev=11
+vendid=0x14e4
+devid=0x43ab
+manfid=0x2d0
+prodid=0x06e4
+macaddr=00:90:4c:c5:12:38
+nocrc=1
+boardtype=0x6e4
+boardrev=0x1304
+xtalfreq=37400
+#boardflags: 5GHz eTR switch by default
+#2.4GHz eTR switch by default
+#bit1 for btcoex
+boardflags=0x00080201
+boardflags2=0x40000000
+boardflags3=0x48200100
+rxgains2gelnagaina0=0
+rxgains2gtrisoa0=0
+rxgains2gtrelnabypa0=0
+rxgains5gelnagaina0=0
+rxgains5gtrisoa0=0
+rxgains5gtrelnabypa0=0
+rxchain=1
+txchain=1
+aa2g=1
+aa5g=1
+tssipos5g=1
+tssipos2g=1
+femctrl=0
+AvVmid_c0=0,157,1,126,1,126,1,126,1,126
+pa2ga0=-112,6296,-662
+pa2ga1=-165,3699,-515
+pa5ga0=-143,6016,-683,-141,6013,-678,-137,5988,-670,-136,5982,-670
+pa5ga1=-161,3544,-499,-166,3543,-497,-169,3569,-497,-171,3598,-498
+itrsw=1
+pdoffset2g40ma0=10
+pdoffset40ma0=0xaaaa
+pdoffset80ma0=0xaaaa
+extpagain5g=2
+extpagain2g=2
+tworangetssi2g=1
+tworangetssi5g=1
+# LTECX flags
+# WCI2
+ltecxmux=0
+ltecxpadnum=0x0504
+ltecxfnsel=0x22
+ltecxgcigpio=0x32
+
+maxp2ga0=64
+ofdmlrbw202gpo=0x0033
+dot11agofdmhrbw202gpo=0x1553
+mcsbw202gpo=0x99355533
+
+maxp5ga0=80,82,76,77
+
+mcsbw205glpo=0x99755000
+mcsbw205gmpo=0x9df55000
+mcsbw205ghpo=0x99855000
+
+mcsbw405glpo=0xb8555000
+mcsbw405gmpo=0xed955000
+mcsbw405ghpo=0xd9755000
+
+mcsbw805glpo=0xc8555000
+mcsbw805gmpo=0xe9555000
+mcsbw805ghpo=0xd9555000
+
+swctrlmap_2g=0x00040004,0x00020002,0x00040004,0x010a02,0x1ff
+swctrlmap_5g=0x00100010,0x00200020,0x00100010,0x010a02,0x2f4
+swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
+
+vcodivmode=1
+deadman_to=481500000
+ed_thresh2g=-54
+ed_thresh5g=-54
+
+muxenab=0x10
diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig
index 29e648c9b0..16d73e14ae 100644
--- a/configs/orangepi_lite2_defconfig
+++ b/configs/orangepi_lite2_defconfig
@@ -42,6 +42,19 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
 BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
 BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-lite2/genimage.cfg"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-lite2/post-build.sh"
+BR2_ROOTFS_OVERLAY="board/orangepi/orangepi-lite2/rootfs_overlay"
+
+# wireless firmware
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
+
+# wireless tools
+BR2_PACKAGE_IW=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
+BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
-- 
2.18.0.321.gffc6fa0e3

[Buildroot] [PATCH 1/4] uboot: bump to version 2018.09

[Thomas Petazzoni]

Hello,

On Sat,  3 Nov 2018 18:26:05 +0530, Jagan Teki wrote:
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  boot/uboot/Config.in  | 4 ++--
>  boot/uboot/uboot.hash | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)

Applied to master, thanks.

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support

[Baruch Siach]

Hi Jagan,

Jagan Teki writes:
> diff --git a/board/orangepi/orangepi-one-plus/extlinux.conf b/board/orangepi/orangepi-one-plus/extlinux.conf
> new file mode 100644
> index 0000000000..eae328449c
> --- /dev/null
> +++ b/board/orangepi/orangepi-one-plus/extlinux.conf
> @@ -0,0 +1,4 @@
> +label linux-4.18.0-rc3

This doesn't match the actual kernel version. I think you can just drop
the version from the label. It is easy to forget keeping it in sync with
the kernel version.

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

[Buildroot] [PATCH v2 2/4] board: orangepi: Add Orangepi One Plus support

[Thomas Petazzoni]

Hello,

On Sat,  3 Nov 2018 18:26:06 +0530, Jagan Teki wrote:
> Add initial support for Orangepi One Plus board
> with below features:
> - U-Boot 2018.09
> - Linux 4.19.0-rc8
> - Default packages from buildroot
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - Use mainline u-boot
> - Use tag in Linux

Applied to master after fixing the extlinux.conf to drop the version of
the Linux kernel.

Also, is this board now supported in upstream U-Boot and Linux? If so,
it would be nice to use that.

Thanks,

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[Buildroot] [PATCH 3/4] board: orangepi: Add Orangepi Lite2 support

[Thomas Petazzoni]

Hello,

On Sat,  3 Nov 2018 18:26:07 +0530, Jagan Teki wrote:
> Add initial support for Orangepi Lite2 board
> with below features:
> - U-Boot 2018.09
> - Linux 4.19.0-rc8
> - Default packages from buildroot
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  .gitlab-ci.yml                              |  1 +
>  DEVELOPERS                                  |  2 +
>  board/orangepi/orangepi-lite2/extlinux.conf |  4 ++
>  board/orangepi/orangepi-lite2/genimage.cfg  | 33 +++++++++++++++
>  board/orangepi/orangepi-lite2/post-build.sh |  4 ++
>  board/orangepi/orangepi-lite2/readme.txt    | 35 +++++++++++++++
>  configs/orangepi_lite2_defconfig            | 47 +++++++++++++++++++++
>  7 files changed, 126 insertions(+)
>  create mode 100644 board/orangepi/orangepi-lite2/extlinux.conf
>  create mode 100644 board/orangepi/orangepi-lite2/genimage.cfg
>  create mode 100755 board/orangepi/orangepi-lite2/post-build.sh
>  create mode 100644 board/orangepi/orangepi-lite2/readme.txt
>  create mode 100644 configs/orangepi_lite2_defconfig

Applied to master after adjusting extlinux.conf as well. Also, please
send an update to the defconfig once this board is supported in
upstream U-Boot and Linux.

Thanks,

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[Buildroot] [PATCH 4/4] board: orangepi: lite2: Add WiFi support

[Thomas Petazzoni]

Hello,

On Sat,  3 Nov 2018 18:26:08 +0530, Jagan Teki wrote:
> Orangepi lite2 board has AP6356S WiFi/BT combo, but does
> not have ethernet port. So it makes sense to enable wireless
> networking by default:
> - add broadcom wireless firmware package to image
> - add basic wireless tools to image
> - add rootfs overlay with proper NVRAM file for on-board AP6356S chip
> - add mdev to image to enable module autoloading
> - update readme.txt to test wifi
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  board/orangepi/orangepi-lite2/readme.txt      |  9 ++
>  .../lib/firmware/brcm/brcmfmac43455-sdio.txt  | 82 +++++++++++++++++++
>  configs/orangepi_lite2_defconfig              | 13 +++
>  3 files changed, 104 insertions(+)
>  create mode 100755 board/orangepi/orangepi-lite2/rootfs_overlay/lib/firmware/brcm/brcmfmac43455-sdio.txt

Applied to master, thanks.

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com