* [Buildroot] [PATCH 1/1] package/bird: select at least one protocol @ 2019-10-15 19:23 Fabrice Fontaine 2019-10-16 19:41 ` Thomas Petazzoni 0 siblings, 1 reply; 4+ messages in thread From: Fabrice Fontaine @ 2019-10-15 19:23 UTC (permalink / raw) To: buildroot bird needs at least one protocol so select BGP if no other protocols are selected as BGP is already the default one Fixes: - http://autobuild.buildroot.org/results/0b00948eed9bb8405b70f3f9112ecce99b365f35 Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> --- package/bird/Config.in | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/package/bird/Config.in b/package/bird/Config.in index c2951c74c3..3baf43f98e 100644 --- a/package/bird/Config.in +++ b/package/bird/Config.in @@ -1,6 +1,11 @@ config BR2_PACKAGE_BIRD bool "bird" depends on BR2_USE_MMU # fork() + select BR2_PACKAGE_BIRD_BGP if !(BR2_PACKAGE_BIRD_BABEL || \ + BR2_PACKAGE_BIRD_BFD || BR2_PACKAGE_BIRD_MRT || \ + BR2_PACKAGE_BIRD_OSPF || BR2_PACKAGE_BIRD_PERF || \ + BR2_PACKAGE_BIRD_PIPE || BR2_PACKAGE_BIRD_RADV || \ + BR2_PACKAGE_BIRD_RIP || BR2_PACKAGE_BIRD_STATIC) help BIRD Internet Routing Daemon @@ -38,7 +43,6 @@ comment "BFD protocol needs a toolchain w/ NPTL" config BR2_PACKAGE_BIRD_BGP bool "bgp" - default y help Enable BGP protocol. -- 2.23.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] package/bird: select at least one protocol 2019-10-15 19:23 [Buildroot] [PATCH 1/1] package/bird: select at least one protocol Fabrice Fontaine @ 2019-10-16 19:41 ` Thomas Petazzoni 2019-10-16 21:05 ` Adrien Gallouët 0 siblings, 1 reply; 4+ messages in thread From: Thomas Petazzoni @ 2019-10-16 19:41 UTC (permalink / raw) To: buildroot Hello, I'd like to have the review of Adrien on this patch. Adrien, could you comment? Also, I have my own comment, see below. On Tue, 15 Oct 2019 21:23:03 +0200 Fabrice Fontaine <fontaine.fabrice@gmail.com> wrote: > bird needs at least one protocol so select BGP if no other protocols are > selected as BGP is already the default one > > Fixes: > - http://autobuild.buildroot.org/results/0b00948eed9bb8405b70f3f9112ecce99b365f35 > > Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> > --- > package/bird/Config.in | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/package/bird/Config.in b/package/bird/Config.in > index c2951c74c3..3baf43f98e 100644 > --- a/package/bird/Config.in > +++ b/package/bird/Config.in > @@ -1,6 +1,11 @@ > config BR2_PACKAGE_BIRD > bool "bird" > depends on BR2_USE_MMU # fork() > + select BR2_PACKAGE_BIRD_BGP if !(BR2_PACKAGE_BIRD_BABEL || \ > + BR2_PACKAGE_BIRD_BFD || BR2_PACKAGE_BIRD_MRT || \ > + BR2_PACKAGE_BIRD_OSPF || BR2_PACKAGE_BIRD_PERF || \ > + BR2_PACKAGE_BIRD_PIPE || BR2_PACKAGE_BIRD_RADV || \ > + BR2_PACKAGE_BIRD_RIP || BR2_PACKAGE_BIRD_STATIC) This is not so nice. Perhaps we could do it like this: config BR2_PACKAGE_BIRD_AT_LEAST_ONE_PROTOCOL bool config BR2_PACKAGE_BIRD bool "bird" ... select BR2_PACKAGE_BIRD_BGP if !BR2_PACKAGE_BIRD_AT_LEAST_ONE_PROTOCOL if BR2_PACKAGE_BIRD config BR2_PACKAGE_BIRD_BGP bool "bgp" select BR2_PACKAGE_BIRD_AT_LEAST_ONE_PROTOCOL ... endif Does this work ? Best regards, Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] package/bird: select at least one protocol 2019-10-16 19:41 ` Thomas Petazzoni @ 2019-10-16 21:05 ` Adrien Gallouët 2019-10-16 21:21 ` Fabrice Fontaine 0 siblings, 1 reply; 4+ messages in thread From: Adrien Gallouët @ 2019-10-16 21:05 UTC (permalink / raw) To: buildroot Hi, On Wed, Oct 16, 2019 at 9:41 PM Thomas Petazzoni <thomas.petazzoni@bootlin.com> wrote: > > Hello, > > I'd like to have the review of Adrien on this patch. Adrien, could you > comment? Also, I have my own comment, see below. > > On Tue, 15 Oct 2019 21:23:03 +0200 > Fabrice Fontaine <fontaine.fabrice@gmail.com> wrote: > > > bird needs at least one protocol so select BGP if no other protocols are > > selected as BGP is already the default one > > > > Fixes: > > - http://autobuild.buildroot.org/results/0b00948eed9bb8405b70f3f9112ecce99b365f35 > > > > Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> > > --- > > package/bird/Config.in | 6 +++++- > > 1 file changed, 5 insertions(+), 1 deletion(-) > > > > diff --git a/package/bird/Config.in b/package/bird/Config.in > > index c2951c74c3..3baf43f98e 100644 > > --- a/package/bird/Config.in > > +++ b/package/bird/Config.in > > @@ -1,6 +1,11 @@ > > config BR2_PACKAGE_BIRD > > bool "bird" > > depends on BR2_USE_MMU # fork() > > + select BR2_PACKAGE_BIRD_BGP if !(BR2_PACKAGE_BIRD_BABEL || \ > > + BR2_PACKAGE_BIRD_BFD || BR2_PACKAGE_BIRD_MRT || \ > > + BR2_PACKAGE_BIRD_OSPF || BR2_PACKAGE_BIRD_PERF || \ > > + BR2_PACKAGE_BIRD_PIPE || BR2_PACKAGE_BIRD_RADV || \ > > + BR2_PACKAGE_BIRD_RIP || BR2_PACKAGE_BIRD_STATIC) > > This is not so nice. Perhaps we could do it like this: > > config BR2_PACKAGE_BIRD_AT_LEAST_ONE_PROTOCOL > bool > > config BR2_PACKAGE_BIRD > bool "bird" > ... > select BR2_PACKAGE_BIRD_BGP if !BR2_PACKAGE_BIRD_AT_LEAST_ONE_PROTOCOL > > if BR2_PACKAGE_BIRD > > config BR2_PACKAGE_BIRD_BGP > bool "bgp" > select BR2_PACKAGE_BIRD_AT_LEAST_ONE_PROTOCOL > > ... > > endif > > Does this work ? > > Best regards, > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com I didn't test the patch yet, but so far I was ok with it. I may have missed something but the Kconfig doc is not really clear about the correct way to handle this. I'm still digging to find a clean way to fix all builds, as for example --with-protocols=perf will also fail.. We can fix upstream or add some dependencies (perf alone doesn't make really sense). Regards, Adrien ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] package/bird: select at least one protocol 2019-10-16 21:05 ` Adrien Gallouët @ 2019-10-16 21:21 ` Fabrice Fontaine 0 siblings, 0 replies; 4+ messages in thread From: Fabrice Fontaine @ 2019-10-16 21:21 UTC (permalink / raw) To: buildroot Hi, Le mer. 16 oct. 2019 ? 23:05, Adrien Gallou?t <adrien@gallouet.fr> a ?crit : > > Hi, > > On Wed, Oct 16, 2019 at 9:41 PM Thomas Petazzoni > <thomas.petazzoni@bootlin.com> wrote: > > > > Hello, > > > > I'd like to have the review of Adrien on this patch. Adrien, could you > > comment? Also, I have my own comment, see below. > > > > On Tue, 15 Oct 2019 21:23:03 +0200 > > Fabrice Fontaine <fontaine.fabrice@gmail.com> wrote: > > > > > bird needs at least one protocol so select BGP if no other protocols are > > > selected as BGP is already the default one > > > > > > Fixes: > > > - http://autobuild.buildroot.org/results/0b00948eed9bb8405b70f3f9112ecce99b365f35 > > > > > > Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> > > > --- > > > package/bird/Config.in | 6 +++++- > > > 1 file changed, 5 insertions(+), 1 deletion(-) > > > > > > diff --git a/package/bird/Config.in b/package/bird/Config.in > > > index c2951c74c3..3baf43f98e 100644 > > > --- a/package/bird/Config.in > > > +++ b/package/bird/Config.in > > > @@ -1,6 +1,11 @@ > > > config BR2_PACKAGE_BIRD > > > bool "bird" > > > depends on BR2_USE_MMU # fork() > > > + select BR2_PACKAGE_BIRD_BGP if !(BR2_PACKAGE_BIRD_BABEL || \ > > > + BR2_PACKAGE_BIRD_BFD || BR2_PACKAGE_BIRD_MRT || \ > > > + BR2_PACKAGE_BIRD_OSPF || BR2_PACKAGE_BIRD_PERF || \ > > > + BR2_PACKAGE_BIRD_PIPE || BR2_PACKAGE_BIRD_RADV || \ > > > + BR2_PACKAGE_BIRD_RIP || BR2_PACKAGE_BIRD_STATIC) > > > > This is not so nice. Perhaps we could do it like this: > > > > config BR2_PACKAGE_BIRD_AT_LEAST_ONE_PROTOCOL > > bool > > > > config BR2_PACKAGE_BIRD > > bool "bird" > > ... > > select BR2_PACKAGE_BIRD_BGP if !BR2_PACKAGE_BIRD_AT_LEAST_ONE_PROTOCOL > > > > if BR2_PACKAGE_BIRD > > > > config BR2_PACKAGE_BIRD_BGP > > bool "bgp" > > select BR2_PACKAGE_BIRD_AT_LEAST_ONE_PROTOCOL > > > > ... > > > > endif > > > > Does this work ? > > > > Best regards, > > > > Thomas > > -- > > Thomas Petazzoni, CTO, Bootlin > > Embedded Linux and Kernel engineering > > https://bootlin.com > > I didn't test the patch yet, but so far I was ok with it. > I may have missed something but the Kconfig doc is not really clear > about the correct way to handle this. > > I'm still digging to find a clean way to fix all builds, as for > example --with-protocols=perf will also fail.. > We can fix upstream or add some dependencies (perf alone doesn't make > really sense). From my understanding, a lot of (all ?) build failures are linked to the following error: bison -Dparse.lac=full -Dparse.error=verbose -dv -pcf_ -b obj/conf/cf-parse obj/conf/cf-parse.y nest/config.Y:381.20-23: error: symbol LINK is used, but is not defined as a token and has no rules 381 | | dev_proto CHECK LINK bool ';' { DIRECT_CFG->check_link = $4; } | ^~~~ make[1]: *** [obj/conf/cf-parse.tab.c] Error 1 This error is raised because of the following commit: https://gitlab.labs.nic.cz/labs/bird/commit/e90dd656cc9126e1fbcc45fb77a10bf1baa2a1b5 This commit assumes that LINK is defined which is not always the case. After more investigations, it seems that LINK is not defined by BFD, MRT, PERF, PIPE, RPKI: https://gitlab.labs.nic.cz/labs/bird/blob/master/proto/bfd/config.Y So a best patch would be to force the selection of at least babel, bgp, ospf, radv, rip or static (or fix nest/config.Y) > > Regards, > Adrien Best Regards, Fabrice ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-16 21:21 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-10-15 19:23 [Buildroot] [PATCH 1/1] package/bird: select at least one protocol Fabrice Fontaine 2019-10-16 19:41 ` Thomas Petazzoni 2019-10-16 21:05 ` Adrien Gallouët 2019-10-16 21:21 ` Fabrice Fontaine
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox