From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To: buildroot@busybox.net
Subject: [Buildroot] [EXT] Re: [PATCH v2 07/10] package/freescale-qoriq/fsl-qoriq-cadence-dp-fw: new package
Date: Tue, 26 Nov 2019 11:12:59 +0100 [thread overview]
Message-ID: <20191126111259.3ae8feac@windsurf> (raw)
In-Reply-To: <165d3a2c0b806e889efe738487d216bd@walle.cc>
On Tue, 26 Nov 2019 10:29:18 +0100
Michael Walle <michael@walle.cc> wrote:
> >> Final semi-colon not needed.
> > Will use below command in v3:
> > define QORIQ_CADENCE_DP_FIRMWARE_EXTRACT_CMDS
> > $(call
> > NXP_QORIQ_EXTRACT_HELPER,$(QORIQ_CADENCE_DP_FIRMWARE_DL_DIR)/$(QORIQ_CADENCE_DP_FIRMWARE_SOURCE))
> > endef
>
> please don't duplicate that piece of code.. it should really be
> NXP_EXTRACT_HELPER. which leads to the cleanup of the freescale-imx
> and nxp-qoriq directories. IMHO both should be named consistently.
> Thomas? Matthew?
What are you suggesting? A single package/nxp/ folder, with everything
in there?
If we do package/nxp-imx/ and package/nxp-qoirq/, then there is still
the question of where to put this common NXP_EXTRACT_HELPER macro
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2019-11-26 10:12 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-21 10:23 [Buildroot] [PATCH v2 0/9] new board ls1028ardb introduced Changming Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 01/10] package/freescale-qoriq: new package directory Changming Huang
2019-11-25 21:13 ` Thomas Petazzoni
2019-11-26 2:49 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 02/10] package/freescale-qoriq/fsl-qoriq-rcw: move rcw into freescale-qoriq and rename it Changming Huang
2019-11-21 10:34 ` Michael Walle
2019-11-21 10:42 ` [Buildroot] [EXT] " Jerry Huang
2019-11-25 21:15 ` [Buildroot] " Thomas Petazzoni
2019-11-26 3:25 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 03/10] package/freescale-qoriq/fsl-qoriq-rcw: upgrade the rcw version to LSDK-19.09 Changming Huang
2019-11-25 21:17 ` Thomas Petazzoni
2019-11-26 3:51 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 04/10] package/freescale-qoriq/fsl-qoriq-rcw: add target rcw binary support Changming Huang
2019-11-25 21:23 ` Thomas Petazzoni
2019-11-26 4:33 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 05/10] boot/arm-trusted-firmware: Add option BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE Changming Huang
2019-11-22 9:11 ` Sergey Matyukevich
2019-11-22 9:24 ` [Buildroot] [EXT] " Jerry Huang
2019-11-25 21:59 ` [Buildroot] " Thomas Petazzoni
2019-11-21 10:23 ` [Buildroot] [PATCH v2 06/10] boot/arm-trusted-firmware: Add RCW support Changming Huang
2019-11-22 9:19 ` Sergey Matyukevich
2019-11-22 9:31 ` [Buildroot] [EXT] " Jerry Huang
2019-11-25 22:09 ` [Buildroot] " Thomas Petazzoni
2019-11-26 7:06 ` [Buildroot] [EXT] " Jerry Huang
2019-11-26 7:34 ` Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 07/10] package/freescale-qoriq/fsl-qoriq-cadence-dp-fw: new package Changming Huang
2019-11-21 10:42 ` Michael Walle
2019-11-21 11:04 ` [Buildroot] [EXT] " Jerry Huang
2019-11-22 10:41 ` Jerry Huang
2019-11-21 10:51 ` [Buildroot] " Michael Walle
2019-11-21 11:09 ` [Buildroot] [EXT] " Jerry Huang
2019-11-22 10:40 ` Jerry Huang
2019-11-22 11:00 ` Michael Walle
2019-11-25 2:40 ` Jerry Huang
2019-11-22 11:05 ` Thomas Petazzoni
2019-11-25 6:25 ` Jerry Huang
2019-11-25 22:12 ` [Buildroot] " Thomas Petazzoni
2019-11-26 8:09 ` [Buildroot] [EXT] " Jerry Huang
2019-11-26 9:21 ` Michael Walle
2019-11-26 10:13 ` Jerry Huang
2019-11-26 9:29 ` Michael Walle
2019-11-26 10:12 ` Thomas Petazzoni [this message]
2019-11-26 10:31 ` Michael Walle
2019-11-26 12:10 ` Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 08/10] package/freescale-qoriq/fsl-qoriq-rcw:Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
2019-11-25 22:13 ` Thomas Petazzoni
2019-11-26 8:15 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 09/10] board/freescale/common/ls: Add standard post image script for Layerscape processors Changming Huang
2019-11-21 10:23 ` [Buildroot] [PATCH v2 10/10] configs/freescale_ls1028ardb*: new board Changming Huang
2019-11-25 22:17 ` Thomas Petazzoni
2019-11-26 12:02 ` [Buildroot] [EXT] " Jerry Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191126111259.3ae8feac@windsurf \
--to=thomas.petazzoni@bootlin.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox