* [Buildroot] [PATCH v2 1/4] Revert "configs/nanopi_neo4: remove defconfig"
2020-03-30 17:22 [Buildroot] [PATCH v2 0/4] Add nanopi_neo4 board support Marek Belisko
@ 2020-03-30 17:22 ` Marek Belisko
2020-03-30 19:17 ` Thomas Petazzoni
2020-03-30 17:22 ` [Buildroot] [PATCH v2 2/4] nanpi_neo4_config: Enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN option Marek Belisko
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Marek Belisko @ 2020-03-30 17:22 UTC (permalink / raw)
To: buildroot
This reverts commit 8af7b11bd8a95bc41e4de46f727f3b0afde465a4.
neo4 config was removed due to the fact that 32 bit toolchain was missing
for building AFT and was not added until some time.
Recently in commit d9959b647f2afd09e564bddfc3d21476f9a0f669 package
was added to return back neo4 config and use this new option.
---
board/friendlyarm/nanopi-neo4/extlinux.conf | 4 +++
board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ++++++++++++
board/friendlyarm/nanopi-neo4/post-build.sh | 9 +++++
board/friendlyarm/nanopi-neo4/readme.txt | 53 ++++++++++++++++++++++++++++
configs/nanopi_neo4_defconfig | 54 +++++++++++++++++++++++++++++
5 files changed, 142 insertions(+)
create mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
create mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
create mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
create mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
create mode 100644 configs/nanopi_neo4_defconfig
diff --git a/board/friendlyarm/nanopi-neo4/extlinux.conf b/board/friendlyarm/nanopi-neo4/extlinux.conf
new file mode 100644
index 0000000..91eef67
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/extlinux.conf
@@ -0,0 +1,4 @@
+label NanoPi Neo4 linux
+ kernel /boot/Image
+ devicetree /boot/rk3399-nanopi-neo4.dtb
+ append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
diff --git a/board/friendlyarm/nanopi-neo4/genimage.cfg b/board/friendlyarm/nanopi-neo4/genimage.cfg
new file mode 100644
index 0000000..b8c1cd5
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/genimage.cfg
@@ -0,0 +1,22 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot-tpl-spl-dtb {
+ in-partition-table = "no"
+ image = "u-boot-tpl-spl-dtb.img"
+ offset = 32K
+ }
+
+ partition u-boot-dtb {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 8M
+ size = 30M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/friendlyarm/nanopi-neo4/post-build.sh b/board/friendlyarm/nanopi-neo4/post-build.sh
new file mode 100755
index 0000000..e852ba6
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/post-build.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-tpl-dtb.bin $BINARIES_DIR/u-boot-tpl-dtb.img
+cat $BINARIES_DIR/u-boot-tpl-dtb.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopi-neo4/readme.txt b/board/friendlyarm/nanopi-neo4/readme.txt
new file mode 100644
index 0000000..07e3491
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo4/readme.txt
@@ -0,0 +1,53 @@
+Intro
+=====
+
+NanoPi Neo4 is a RK3399 SoC based ARM64 board.
+
+
+Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4
+Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html
+
+Build
+=====
+
+Run NanoPi Neo4 configuration
+
+ $ make nanopi_neo4_defconfig
+
+To build, run make comamnd.
+
+ $ make
+
+Files created in output directory
+=================================
+
+output/images
+
+??? bl31.bin
+??? bl31.elf
+??? Image
+??? rk3399-nanopi-neo4.dtb
+??? rootfs.ext2
+??? rootfs.ext4 -> rootfs.ext2
+??? rootfs.tar
+??? sdcard.img
+??? u-boot.bin
+??? u-boot.itb
+??? u-boot-spl-dtb.bin
+??? u-boot-tpl-dtb.bin
+??? u-boot-tpl-dtb.img
+??? u-boot-tpl-spl-dtb.img
+
+Creating bootable SD card:
+=========================
+
+Simply invoke (as root)
+
+ # dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device
+
+Serial console
+--------------
+
+Baudrate for this board is 1500000
diff --git a/configs/nanopi_neo4_defconfig b/configs/nanopi_neo4_defconfig
new file mode 100644
index 0000000..0e58aea
--- /dev/null
+++ b/configs/nanopi_neo4_defconfig
@@ -0,0 +1,54 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+
+# Linux headers same as kernel, a 5.2 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="dd2b180c457d35de195707dfa0b57a83b97fb275"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-neo4-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl-dtb.bin"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.2"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-neo4"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_HOSTNAME="NanoPi Neo4"
+BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPi Neo4!"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo4/genimage.cfg"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo4/post-build.sh"
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread* [Buildroot] [PATCH v2 1/4] Revert "configs/nanopi_neo4: remove defconfig"
2020-03-30 17:22 ` [Buildroot] [PATCH v2 1/4] Revert "configs/nanopi_neo4: remove defconfig" Marek Belisko
@ 2020-03-30 19:17 ` Thomas Petazzoni
2020-03-30 19:34 ` Belisko Marek
0 siblings, 1 reply; 8+ messages in thread
From: Thomas Petazzoni @ 2020-03-30 19:17 UTC (permalink / raw)
To: buildroot
On Mon, 30 Mar 2020 19:22:58 +0200
Marek Belisko <marek.belisko@open-nandra.com> wrote:
> This reverts commit 8af7b11bd8a95bc41e4de46f727f3b0afde465a4.
>
> neo4 config was removed due to the fact that 32 bit toolchain was missing
> for building AFT and was not added until some time.
>
> Recently in commit d9959b647f2afd09e564bddfc3d21476f9a0f669 package
> was added to return back neo4 config and use this new option.
Your Signed-off-by is missing. However, I think a revert is the bad
approach, indeed this commit by itself is still broken, it needs the
second patch in your series to work correctly.
So could you instead simply resubmit a new neo4 defconfig ?
Thanks,
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH v2 1/4] Revert "configs/nanopi_neo4: remove defconfig"
2020-03-30 19:17 ` Thomas Petazzoni
@ 2020-03-30 19:34 ` Belisko Marek
2020-03-30 19:35 ` Thomas Petazzoni
0 siblings, 1 reply; 8+ messages in thread
From: Belisko Marek @ 2020-03-30 19:34 UTC (permalink / raw)
To: buildroot
On Mon, Mar 30, 2020 at 9:17 PM Thomas Petazzoni
<thomas.petazzoni@bootlin.com> wrote:
>
> On Mon, 30 Mar 2020 19:22:58 +0200
> Marek Belisko <marek.belisko@open-nandra.com> wrote:
>
> > This reverts commit 8af7b11bd8a95bc41e4de46f727f3b0afde465a4.
> >
> > neo4 config was removed due to the fact that 32 bit toolchain was missing
> > for building AFT and was not added until some time.
> >
> > Recently in commit d9959b647f2afd09e564bddfc3d21476f9a0f669 package
> > was added to return back neo4 config and use this new option.
>
>
> Your Signed-off-by is missing. However, I think a revert is the bad
> approach, indeed this commit by itself is still broken, it needs the
> second patch in your series to work correctly.
>
> So could you instead simply resubmit a new neo4 defconfig ?
You mean squash all other commits to one and post as initial commit
in:d1cd9cdf269488d6adeb0cc6d2250cf6ffe1b3ed
Thanks.
>
> Thanks,
>
> Thomas
> --
> Thomas Petazzoni, CTO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
marek
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH v2 2/4] nanpi_neo4_config: Enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN option
2020-03-30 17:22 [Buildroot] [PATCH v2 0/4] Add nanopi_neo4 board support Marek Belisko
2020-03-30 17:22 ` [Buildroot] [PATCH v2 1/4] Revert "configs/nanopi_neo4: remove defconfig" Marek Belisko
@ 2020-03-30 17:22 ` Marek Belisko
2020-03-30 17:23 ` [Buildroot] [PATCH v2 3/4] nanopi_neo4_defconfig: Bump kernel to 5.4 Marek Belisko
2020-03-30 17:23 ` [Buildroot] [PATCH v2 4/4] nanopi_neo4_defconfig: Bump rootfs size to 70M Marek Belisko
3 siblings, 0 replies; 8+ messages in thread
From: Marek Belisko @ 2020-03-30 17:22 UTC (permalink / raw)
To: buildroot
With this option enabled AFT to neo4 will be build without issues.
For more details see commit: 8af7b11bd8a95bc41e4de46f727f3b0afde465a4 and
d9959b647f2afd09e564bddfc3d21476f9a0f669
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
configs/nanopi_neo4_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/nanopi_neo4_defconfig b/configs/nanopi_neo4_defconfig
index 0e58aea..2bffe66 100644
--- a/configs/nanopi_neo4_defconfig
+++ b/configs/nanopi_neo4_defconfig
@@ -11,6 +11,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0"
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
# Bootloader
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH v2 3/4] nanopi_neo4_defconfig: Bump kernel to 5.4
2020-03-30 17:22 [Buildroot] [PATCH v2 0/4] Add nanopi_neo4 board support Marek Belisko
2020-03-30 17:22 ` [Buildroot] [PATCH v2 1/4] Revert "configs/nanopi_neo4: remove defconfig" Marek Belisko
2020-03-30 17:22 ` [Buildroot] [PATCH v2 2/4] nanpi_neo4_config: Enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN option Marek Belisko
@ 2020-03-30 17:23 ` Marek Belisko
2020-03-30 17:23 ` [Buildroot] [PATCH v2 4/4] nanopi_neo4_defconfig: Bump rootfs size to 70M Marek Belisko
3 siblings, 0 replies; 8+ messages in thread
From: Marek Belisko @ 2020-03-30 17:23 UTC (permalink / raw)
To: buildroot
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
configs/nanopi_neo4_defconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/configs/nanopi_neo4_defconfig b/configs/nanopi_neo4_defconfig
index 2bffe66..f68b5e2 100644
--- a/configs/nanopi_neo4_defconfig
+++ b/configs/nanopi_neo4_defconfig
@@ -2,8 +2,8 @@
BR2_aarch64=y
BR2_cortex_a72_a53=y
-# Linux headers same as kernel, a 5.2 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=y
+# Linux headers same as kernel, a 5.4 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
# Firmware
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
@@ -34,7 +34,7 @@ BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl-dtb.bin"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.2"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.18"
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-neo4"
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [Buildroot] [PATCH v2 4/4] nanopi_neo4_defconfig: Bump rootfs size to 70M
2020-03-30 17:22 [Buildroot] [PATCH v2 0/4] Add nanopi_neo4 board support Marek Belisko
` (2 preceding siblings ...)
2020-03-30 17:23 ` [Buildroot] [PATCH v2 3/4] nanopi_neo4_defconfig: Bump kernel to 5.4 Marek Belisko
@ 2020-03-30 17:23 ` Marek Belisko
3 siblings, 0 replies; 8+ messages in thread
From: Marek Belisko @ 2020-03-30 17:23 UTC (permalink / raw)
To: buildroot
When bumped kernel to 5.4 rootfs increase a bit and it doesn't fit to
default 60M. Increase size to 70M.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
configs/nanopi_neo4_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/nanopi_neo4_defconfig b/configs/nanopi_neo4_defconfig
index f68b5e2..8cc9bb4 100644
--- a/configs/nanopi_neo4_defconfig
+++ b/configs/nanopi_neo4_defconfig
@@ -46,6 +46,7 @@ BR2_TARGET_GENERIC_HOSTNAME="NanoPi Neo4"
BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPi Neo4!"
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="70M"
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
--
2.7.4
^ permalink raw reply related [flat|nested] 8+ messages in thread