* [Buildroot] [PATCH v2] package/gstreamer1/gst1-plugins-good: Select GUDEV if available @ 2020-06-01 16:43 Ezequiel Garcia 2020-06-04 21:23 ` Yann E. MORIN 0 siblings, 1 reply; 3+ messages in thread From: Ezequiel Garcia @ 2020-06-01 16:43 UTC (permalink / raw) To: buildroot From: Nicolas Dufresne <nicolas.dufresne@collabora.com> Using udev for probes (such as Video4Linux2 devices probes) and device monitor greatly improves load time and monitoring performance. It also enables hotplug monitoring for cameras. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> --- v2: * Enable/disable v4l2-gudev explicitly package/gstreamer1/gst1-plugins-good/Config.in | 1 + .../gstreamer1/gst1-plugins-good/gst1-plugins-good.mk | 9 +++++++++ 2 files changed, 10 insertions(+) diff --git a/package/gstreamer1/gst1-plugins-good/Config.in b/package/gstreamer1/gst1-plugins-good/Config.in index 20aebc473e89..be77f5a82e3d 100644 --- a/package/gstreamer1/gst1-plugins-good/Config.in +++ b/package/gstreamer1/gst1-plugins-good/Config.in @@ -295,6 +295,7 @@ config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_SHOUT2 config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2 bool "v4l2" depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 # multi planar api + select BR2_PACKAGE_LIBGUDEV if BR2_PACKAGE_HAS_UDEV help elements for Video 4 Linux diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk index 223af9850897..bd4bdcbc1ff1 100644 --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk @@ -40,6 +40,10 @@ else GST1_PLUGINS_GOOD_CONF_OPTS += -Djack=disabled endif +ifeq ($(BR2_PACKAGE_LIBGUDEV),y) +GST1_PLUGINS_GOOD_DEPENDENCIES += libgudev +endif + ifeq ($(BR2_PACKAGE_LIBV4L),y) GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2-libv4l2=enabled GST1_PLUGINS_GOOD_DEPENDENCIES += libv4l @@ -355,6 +359,11 @@ endif ifeq ($(BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2),y) GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2=enabled +ifeq ($(BR2_PACKAGE_LIBGUDEV),y) +GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2-gudev=enabled +else +GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2-gudev=disabled +endif else GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2=disabled endif -- 2.26.0.rc2 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH v2] package/gstreamer1/gst1-plugins-good: Select GUDEV if available 2020-06-01 16:43 [Buildroot] [PATCH v2] package/gstreamer1/gst1-plugins-good: Select GUDEV if available Ezequiel Garcia @ 2020-06-04 21:23 ` Yann E. MORIN 2020-06-07 20:07 ` Ezequiel Garcia 0 siblings, 1 reply; 3+ messages in thread From: Yann E. MORIN @ 2020-06-04 21:23 UTC (permalink / raw) To: buildroot Ezequiel, Nicolas, All, On 2020-06-01 13:43 -0300, Ezequiel Garcia spake thusly: > From: Nicolas Dufresne <nicolas.dufresne@collabora.com> > > Using udev for probes (such as Video4Linux2 devices probes) > and device monitor greatly improves load time and monitoring performance. > > It also enables hotplug monitoring for cameras. > > Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> > Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> > --- > v2: > * Enable/disable v4l2-gudev explicitly > > package/gstreamer1/gst1-plugins-good/Config.in | 1 + > .../gstreamer1/gst1-plugins-good/gst1-plugins-good.mk | 9 +++++++++ > 2 files changed, 10 insertions(+) > > diff --git a/package/gstreamer1/gst1-plugins-good/Config.in b/package/gstreamer1/gst1-plugins-good/Config.in > index 20aebc473e89..be77f5a82e3d 100644 > --- a/package/gstreamer1/gst1-plugins-good/Config.in > +++ b/package/gstreamer1/gst1-plugins-good/Config.in > @@ -295,6 +295,7 @@ config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_SHOUT2 > config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2 > bool "v4l2" > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 # multi planar api > + select BR2_PACKAGE_LIBGUDEV if BR2_PACKAGE_HAS_UDEV So there is still something that evades my understanding: gudev is selected only when V4L2 is enabled. However... > help > elements for Video 4 Linux > > diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk > index 223af9850897..bd4bdcbc1ff1 100644 > --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk > +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk > @@ -40,6 +40,10 @@ else > GST1_PLUGINS_GOOD_CONF_OPTS += -Djack=disabled > endif > > +ifeq ($(BR2_PACKAGE_LIBGUDEV),y) > +GST1_PLUGINS_GOOD_DEPENDENCIES += libgudev > +endif The dependency is added glbally. So we end up with this truth table: gudev | v4l2 plugin | dependency --------+-------------+------------ n | n | n Y | n | Y Y | Y | Y (the fourth case is not possible, as the v4l2 plugin select gudev) Is that what you expect? From the commit log, it looks like v4l2 is only one case amongst many: "Using udev for probes (such as Video4Linux2 devices probes)". So, I would have expected the select to be on the main gst1-plugins0-good symbol: menuconfig BR2_PACKAGE_GST1_PLUGINS_GOOD bool "gst1-plugins-good" select BR2_PACKAGE_LIBGUDEV if BR2_PACKAGE_HAS_UDEV Regards, Yann E. MORIN. > ifeq ($(BR2_PACKAGE_LIBV4L),y) > GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2-libv4l2=enabled > GST1_PLUGINS_GOOD_DEPENDENCIES += libv4l > @@ -355,6 +359,11 @@ endif > > ifeq ($(BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2),y) > GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2=enabled > +ifeq ($(BR2_PACKAGE_LIBGUDEV),y) > +GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2-gudev=enabled > +else > +GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2-gudev=disabled > +endif > else > GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2=disabled > endif > -- > 2.26.0.rc2 > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' ^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH v2] package/gstreamer1/gst1-plugins-good: Select GUDEV if available 2020-06-04 21:23 ` Yann E. MORIN @ 2020-06-07 20:07 ` Ezequiel Garcia 0 siblings, 0 replies; 3+ messages in thread From: Ezequiel Garcia @ 2020-06-07 20:07 UTC (permalink / raw) To: buildroot On Thu, 4 Jun 2020 at 18:23, Yann E. MORIN <yann.morin.1998@free.fr> wrote: > > Ezequiel, Nicolas, All, > > On 2020-06-01 13:43 -0300, Ezequiel Garcia spake thusly: > > From: Nicolas Dufresne <nicolas.dufresne@collabora.com> > > > > Using udev for probes (such as Video4Linux2 devices probes) > > and device monitor greatly improves load time and monitoring performance. > > > > It also enables hotplug monitoring for cameras. > > > > Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> > > Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> > > --- > > v2: > > * Enable/disable v4l2-gudev explicitly > > > > package/gstreamer1/gst1-plugins-good/Config.in | 1 + > > .../gstreamer1/gst1-plugins-good/gst1-plugins-good.mk | 9 +++++++++ > > 2 files changed, 10 insertions(+) > > > > diff --git a/package/gstreamer1/gst1-plugins-good/Config.in b/package/gstreamer1/gst1-plugins-good/Config.in > > index 20aebc473e89..be77f5a82e3d 100644 > > --- a/package/gstreamer1/gst1-plugins-good/Config.in > > +++ b/package/gstreamer1/gst1-plugins-good/Config.in > > @@ -295,6 +295,7 @@ config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_SHOUT2 > > config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2 > > bool "v4l2" > > depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_0 # multi planar api > > + select BR2_PACKAGE_LIBGUDEV if BR2_PACKAGE_HAS_UDEV > > So there is still something that evades my understanding: gudev is > selected only when V4L2 is enabled. > > However... > > > help > > elements for Video 4 Linux > > > > diff --git a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk > > index 223af9850897..bd4bdcbc1ff1 100644 > > --- a/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk > > +++ b/package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk > > @@ -40,6 +40,10 @@ else > > GST1_PLUGINS_GOOD_CONF_OPTS += -Djack=disabled > > endif > > > > +ifeq ($(BR2_PACKAGE_LIBGUDEV),y) > > +GST1_PLUGINS_GOOD_DEPENDENCIES += libgudev > > +endif > > The dependency is added glbally. > > So we end up with this truth table: > > gudev | v4l2 plugin | dependency > --------+-------------+------------ > n | n | n > Y | n | Y > Y | Y | Y > > (the fourth case is not possible, as the v4l2 plugin select gudev) > > Is that what you expect? > > From the commit log, it looks like v4l2 is only one case amongst many: > "Using udev for probes (such as Video4Linux2 devices probes)". > Yes, that was the idea, but this is a mistake on my side, as I assumed gudev was being used by other plugins. Seems Video4Linux2 plugins are really the only gudev users. The REQUIREMENTS file in gst-plugins-good clarifies this: Package: gudev Version: >= 147 DebianPackage: libgudev-1.0-dev Plugins: v4l2 (v4l2src) URL: http://www.freedesktop.org/software/systemd/ Notes: This dependency is entirely optional, the video4linux plugin will work just fine without it. gudev is only required for the device probing and monitoring functionality to detect video4linux devices appearing/disappearing at run-time. Let me get a new patch. Thanks again for the review, Ezequiel > So, I would have expected the select to be on the main > gst1-plugins0-good symbol: > > menuconfig BR2_PACKAGE_GST1_PLUGINS_GOOD > bool "gst1-plugins-good" > select BR2_PACKAGE_LIBGUDEV if BR2_PACKAGE_HAS_UDEV > > Regards, > Yann E. MORIN. > > > ifeq ($(BR2_PACKAGE_LIBV4L),y) > > GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2-libv4l2=enabled > > GST1_PLUGINS_GOOD_DEPENDENCIES += libv4l > > @@ -355,6 +359,11 @@ endif > > > > ifeq ($(BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_V4L2),y) > > GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2=enabled > > +ifeq ($(BR2_PACKAGE_LIBGUDEV),y) > > +GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2-gudev=enabled > > +else > > +GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2-gudev=disabled > > +endif > > else > > GST1_PLUGINS_GOOD_CONF_OPTS += -Dv4l2=disabled > > endif > > -- > > 2.26.0.rc2 > > > > _______________________________________________ > > buildroot mailing list > > buildroot at busybox.net > > http://lists.busybox.net/mailman/listinfo/buildroot > > -- > .-----------------.--------------------.------------------.--------------------. > | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | > | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | > | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | > | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | > '------------------------------^-------^------------------^--------------------' ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-06-07 20:07 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-06-01 16:43 [Buildroot] [PATCH v2] package/gstreamer1/gst1-plugins-good: Select GUDEV if available Ezequiel Garcia 2020-06-04 21:23 ` Yann E. MORIN 2020-06-07 20:07 ` Ezequiel Garcia
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox