* [Buildroot] Build Fail: FONTCONFIG_VERSION = 2.13.1 - Can't find uuid
@ 2020-06-06 16:52 Ernie Carp
2020-06-06 17:51 ` Peter Seiderer
0 siblings, 1 reply; 3+ messages in thread
From: Ernie Carp @ 2020-06-06 16:52 UTC (permalink / raw)
To: buildroot
Hello,
I post this in case it helps someone else.
Using Buildroot Version: 2020.08-git-00103-gc7cd1f0-dirty
Board: atmel_sama5d27_som1_ek_mmc_dev_defconfig
util-linux version - 2.35.1
When enabling rrdtool, FONTCONFIG_VERSION = 2.13.1 fails with error:
checking for UUID... no
checking where uuid functions comes from... configure: error:
*** uuid is required. install util-linux
I checked, util-linux is installed and uuid is selected but build fails. I
don't know how to fix it properly so I used the older package makefile from
buildroot 2019.05-git-00237-gb643a75-dirty that has util-linux version 2.33
and now rrdtool and all dependencies build without error.
Regards,
Ernie Carp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20200606/2ee1d9aa/attachment.html>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] Build Fail: FONTCONFIG_VERSION = 2.13.1 - Can't find uuid
2020-06-06 16:52 [Buildroot] Build Fail: FONTCONFIG_VERSION = 2.13.1 - Can't find uuid Ernie Carp
@ 2020-06-06 17:51 ` Peter Seiderer
[not found] ` <CAHdaamMJ=S+vUwyc2nBr8-i-OHS=75dPS6rWr9iYCOBu8ONuHw@mail.gmail.com>
0 siblings, 1 reply; 3+ messages in thread
From: Peter Seiderer @ 2020-06-06 17:51 UTC (permalink / raw)
To: buildroot
Hello Ernie,
On Sat, 6 Jun 2020 09:52:07 -0700, Ernie Carp <erniecarp2018@gmail.com> wrote:
> Hello,
>
> I post this in case it helps someone else.
>
> Using Buildroot Version: 2020.08-git-00103-gc7cd1f0-dirty
> Board: atmel_sama5d27_som1_ek_mmc_dev_defconfig
> util-linux version - 2.35.1
>
> When enabling rrdtool, FONTCONFIG_VERSION = 2.13.1 fails with error:
>
> checking for UUID... no
> checking where uuid functions comes from... configure: error:
> *** uuid is required. install util-linux
>
> I checked, util-linux is installed and uuid is selected but build fails. I
> don't know how to fix it properly so I used the older package makefile from
> buildroot 2019.05-git-00237-gb643a75-dirty that has util-linux version 2.33
> and now rrdtool and all dependencies build without error.
The following defconfig compiles here without failure
(atmel_sama5d27_som1_ek_mmc_dev_defconfig with BR2_PACKAGE_RRDTOOL=y):
BR2_arm=y
BR2_cortex_a5=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PTHREAD_DEBUG=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d27_som1_ek_mmc/genimage.cfg"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam-2020.04)/linux-at91-linux4sam-2020.04.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="sama5"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d27_som1_ek"
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
BR2_PACKAGE_ALSA_UTILS_APLAY=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_SWSCALE=y
BR2_PACKAGE_MPG123=y
BR2_PACKAGE_BZIP2=y
BR2_PACKAGE_GZIP=y
BR2_PACKAGE_UNZIP=y
BR2_PACKAGE_XZ=y
BR2_PACKAGE_ZIP=y
BR2_PACKAGE_GDB=y
BR2_PACKAGE_LMBENCH=y
BR2_PACKAGE_DOSFSTOOLS=y
BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y
BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y
BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
BR2_PACKAGE_MMC_UTILS=y
BR2_PACKAGE_MTD=y
BR2_PACKAGE_RRDTOOL=y
BR2_PACKAGE_WILC1000_FIRMWARE=y
BR2_PACKAGE_EVTEST=y
BR2_PACKAGE_I2C_TOOLS=y
BR2_PACKAGE_RNG_TOOLS=y
BR2_PACKAGE_SETSERIAL=y
BR2_PACKAGE_SPI_TOOLS=y
BR2_PACKAGE_USBUTILS=y
BR2_PACKAGE_LIBDRM=y
BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
BR2_PACKAGE_DTC=y
BR2_PACKAGE_DTC_PROGRAMS=y
BR2_PACKAGE_BLUEZ5_UTILS=y
BR2_PACKAGE_BRIDGE_UTILS=y
BR2_PACKAGE_CAN_UTILS=y
BR2_PACKAGE_ETHTOOL=y
BR2_PACKAGE_IPERF=y
BR2_PACKAGE_IPROUTE2=y
BR2_PACKAGE_IPTABLES=y
BR2_PACKAGE_IW=y
BR2_PACKAGE_LRZSZ=y
BR2_PACKAGE_MII_DIAG=y
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_WGET=y
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_BASH=y
BR2_PACKAGE_HTOP=y
BR2_PACKAGE_VIM=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
BR2_TARGET_AT91BOOTSTRAP3=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v3.9.2)/at91bootstrap3-v3.9.2.tar.gz"
BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_som1_eksd_uboot"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam-2020.04)/u-boot-at91-linux4sam-2020.04.tar.gz"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d27_som1_ek_mmc"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
Are your sure you did a complete re-build (or at least a re-build of the
util-linux package) after enabling rrdtool (see [1])?
Regards,
Peter
[1] https://buildroot.org/downloads/manual/manual.html#full-rebuild
>
> Regards,
> Ernie Carp
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] Build Fail: FONTCONFIG_VERSION = 2.13.1 - Can't find uuid
[not found] ` <CAHdaamMJ=S+vUwyc2nBr8-i-OHS=75dPS6rWr9iYCOBu8ONuHw@mail.gmail.com>
@ 2020-06-06 20:01 ` Peter Seiderer
0 siblings, 0 replies; 3+ messages in thread
From: Peter Seiderer @ 2020-06-06 20:01 UTC (permalink / raw)
To: buildroot
Hello Ernie,
re-add CC: buildroot at busybox.net
On Sat, 6 Jun 2020 11:29:20 -0700, Ernie Carp <erniecarp2018@gmail.com> wrote:
> Hello Peter,
>
> Sorry, sometimes Ernie is bad. I did not do a full rebuild. I will try that.
>
> Thank you,
> Ernie.
Please keep the mailing list on CC
Regards,
Peter
>
>
> On Sat, Jun 6, 2020 at 10:51 AM Peter Seiderer <ps.report@gmx.net> wrote:
>
> > Hello Ernie,
> >
> > On Sat, 6 Jun 2020 09:52:07 -0700, Ernie Carp <erniecarp2018@gmail.com>
> > wrote:
> >
> > > Hello,
> > >
> > > I post this in case it helps someone else.
> > >
> > > Using Buildroot Version: 2020.08-git-00103-gc7cd1f0-dirty
> > > Board: atmel_sama5d27_som1_ek_mmc_dev_defconfig
> > > util-linux version - 2.35.1
> > >
> > > When enabling rrdtool, FONTCONFIG_VERSION = 2.13.1 fails with error:
> > >
> > > checking for UUID... no
> > > checking where uuid functions comes from... configure: error:
> > > *** uuid is required. install util-linux
> > >
> > > I checked, util-linux is installed and uuid is selected but build fails.
> > I
> > > don't know how to fix it properly so I used the older package makefile
> > from
> > > buildroot 2019.05-git-00237-gb643a75-dirty that has util-linux version
> > 2.33
> > > and now rrdtool and all dependencies build without error.
> >
> > The following defconfig compiles here without failure
> > (atmel_sama5d27_som1_ek_mmc_dev_defconfig with BR2_PACKAGE_RRDTOOL=y):
> >
> > BR2_arm=y
> > BR2_cortex_a5=y
> > BR2_ARM_ENABLE_NEON=y
> > BR2_ARM_ENABLE_VFP=y
> > BR2_ARM_INSTRUCTIONS_THUMB2=y
> > BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
> > BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
> > BR2_PTHREAD_DEBUG=y
> > BR2_TOOLCHAIN_BUILDROOT_CXX=y
> > BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
> > BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> > BR2_ROOTFS_POST_SCRIPT_ARGS="-c
> > board/atmel/sama5d27_som1_ek_mmc/genimage.cfg"
> > BR2_LINUX_KERNEL=y
> > BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> > BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call
> > github,linux4sam,linux-at91,linux4sam-2020.04)/linux-at91-linux4sam-2020.04.tar.gz"
> > BR2_LINUX_KERNEL_DEFCONFIG="sama5"
> > BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d27_som1_ek"
> > BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> > BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> > BR2_PACKAGE_ALSA_UTILS=y
> > BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
> > BR2_PACKAGE_ALSA_UTILS_APLAY=y
> > BR2_PACKAGE_FFMPEG=y
> > BR2_PACKAGE_FFMPEG_GPL=y
> > BR2_PACKAGE_FFMPEG_SWSCALE=y
> > BR2_PACKAGE_MPG123=y
> > BR2_PACKAGE_BZIP2=y
> > BR2_PACKAGE_GZIP=y
> > BR2_PACKAGE_UNZIP=y
> > BR2_PACKAGE_XZ=y
> > BR2_PACKAGE_ZIP=y
> > BR2_PACKAGE_GDB=y
> > BR2_PACKAGE_LMBENCH=y
> > BR2_PACKAGE_DOSFSTOOLS=y
> > BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y
> > BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y
> > BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
> > BR2_PACKAGE_MMC_UTILS=y
> > BR2_PACKAGE_MTD=y
> > BR2_PACKAGE_RRDTOOL=y
> > BR2_PACKAGE_WILC1000_FIRMWARE=y
> > BR2_PACKAGE_EVTEST=y
> > BR2_PACKAGE_I2C_TOOLS=y
> > BR2_PACKAGE_RNG_TOOLS=y
> > BR2_PACKAGE_SETSERIAL=y
> > BR2_PACKAGE_SPI_TOOLS=y
> > BR2_PACKAGE_USBUTILS=y
> > BR2_PACKAGE_LIBDRM=y
> > BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
> > BR2_PACKAGE_DTC=y
> > BR2_PACKAGE_DTC_PROGRAMS=y
> > BR2_PACKAGE_BLUEZ5_UTILS=y
> > BR2_PACKAGE_BRIDGE_UTILS=y
> > BR2_PACKAGE_CAN_UTILS=y
> > BR2_PACKAGE_ETHTOOL=y
> > BR2_PACKAGE_IPERF=y
> > BR2_PACKAGE_IPROUTE2=y
> > BR2_PACKAGE_IPTABLES=y
> > BR2_PACKAGE_IW=y
> > BR2_PACKAGE_LRZSZ=y
> > BR2_PACKAGE_MII_DIAG=y
> > BR2_PACKAGE_OPENSSH=y
> > BR2_PACKAGE_WGET=y
> > BR2_PACKAGE_WIRELESS_TOOLS=y
> > BR2_PACKAGE_WPA_SUPPLICANT=y
> > BR2_PACKAGE_BASH=y
> > BR2_PACKAGE_HTOP=y
> > BR2_PACKAGE_VIM=y
> > BR2_TARGET_ROOTFS_EXT2=y
> > BR2_TARGET_ROOTFS_EXT2_4=y
> > BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> > BR2_TARGET_AT91BOOTSTRAP3=y
> > BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y
> > BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call
> > github,linux4sam,at91bootstrap,v3.9.2)/at91bootstrap3-v3.9.2.tar.gz"
> > BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d27_som1_eksd_uboot"
> > BR2_TARGET_UBOOT=y
> > BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> > BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
> > BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call
> > github,linux4sam,u-boot-at91,linux4sam-2020.04)/u-boot-at91-linux4sam-2020.04.tar.gz"
> > BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d27_som1_ek_mmc"
> > BR2_TARGET_UBOOT_NEEDS_DTC=y
> > BR2_PACKAGE_HOST_DOSFSTOOLS=y
> > BR2_PACKAGE_HOST_GENIMAGE=y
> > BR2_PACKAGE_HOST_MTOOLS=y
> >
> >
> > Are your sure you did a complete re-build (or at least a re-build of the
> > util-linux package) after enabling rrdtool (see [1])?
> >
> > Regards,
> > Peter
> >
> > [1] https://buildroot.org/downloads/manual/manual.html#full-rebuild
> >
> > >
> > > Regards,
> > > Ernie Carp
> >
> >
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-06-06 20:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-06-06 16:52 [Buildroot] Build Fail: FONTCONFIG_VERSION = 2.13.1 - Can't find uuid Ernie Carp
2020-06-06 17:51 ` Peter Seiderer
[not found] ` <CAHdaamMJ=S+vUwyc2nBr8-i-OHS=75dPS6rWr9iYCOBu8ONuHw@mail.gmail.com>
2020-06-06 20:01 ` Peter Seiderer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox