* [Buildroot] [PATCH v2] fs: squashfs: Add config option to pass nopad parameter to mksquashfs
@ 2020-06-14 22:41 Heiko Stuebner
2020-06-17 21:02 ` Yann E. MORIN
0 siblings, 1 reply; 2+ messages in thread
From: Heiko Stuebner @ 2020-06-14 22:41 UTC (permalink / raw)
To: buildroot
From: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Add an option to enable/disable padding to a multiple of 4k. Padding is
the default as it also was the past default behaviour.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
This superseedes the generic approach of adding a generic commandline param
https://patchwork.ozlabs.org/project/buildroot/patch/20200612133249.4127906-1-heiko at sntech.de/
fs/squashfs/Config.in | 8 ++++++++
fs/squashfs/squashfs.mk | 4 ++++
2 files changed, 12 insertions(+)
diff --git a/fs/squashfs/Config.in b/fs/squashfs/Config.in
index dde2097cb7..70d4a20cf0 100644
--- a/fs/squashfs/Config.in
+++ b/fs/squashfs/Config.in
@@ -5,6 +5,13 @@ config BR2_TARGET_ROOTFS_SQUASHFS
if BR2_TARGET_ROOTFS_SQUASHFS
+config BR2_TARGET_ROOTFS_SQUASHFS_PAD
+ bool "pad to a 4K boundary"
+ default y # legacy was always ON
+ help
+ Say 'y' here (the default) to pad the the filesystem image
+ to a 4K boundary. Say 'n' to disable padding.
+
choice
prompt "Compression algorithm"
default BR2_TARGET_ROOTFS_SQUASHFS4_GZIP
@@ -31,4 +38,5 @@ config BR2_TARGET_ROOTFS_SQUASHFS4_ZSTD
bool "zstd"
endchoice
+
endif
diff --git a/fs/squashfs/squashfs.mk b/fs/squashfs/squashfs.mk
index 34ab048603..7a5e3e313e 100644
--- a/fs/squashfs/squashfs.mk
+++ b/fs/squashfs/squashfs.mk
@@ -8,6 +8,10 @@ ROOTFS_SQUASHFS_DEPENDENCIES = host-squashfs
ROOTFS_SQUASHFS_ARGS = -noappend -processors $(PARALLEL_JOBS)
+ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_PAD),)
+ROOTFS_SQUASHFS_ARGS += -nopad
+endif
+
ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS4_LZ4),y)
ROOTFS_SQUASHFS_ARGS += -comp lz4 -Xhc
else ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS4_LZO),y)
--
2.26.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [Buildroot] [PATCH v2] fs: squashfs: Add config option to pass nopad parameter to mksquashfs
2020-06-14 22:41 [Buildroot] [PATCH v2] fs: squashfs: Add config option to pass nopad parameter to mksquashfs Heiko Stuebner
@ 2020-06-17 21:02 ` Yann E. MORIN
0 siblings, 0 replies; 2+ messages in thread
From: Yann E. MORIN @ 2020-06-17 21:02 UTC (permalink / raw)
To: buildroot
Heiko, All,
On 2020-06-15 00:41 +0200, Heiko Stuebner spake thusly:
> From: Christoph Muellner <christoph.muellner@theobroma-systems.com>
>
> Add an option to enable/disable padding to a multiple of 4k. Padding is
> the default as it also was the past default behaviour.
>
> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Applied to master, thanks.
Regards,
Yann E. MORIN.
> ---
> This superseedes the generic approach of adding a generic commandline param
> https://patchwork.ozlabs.org/project/buildroot/patch/20200612133249.4127906-1-heiko at sntech.de/
>
> fs/squashfs/Config.in | 8 ++++++++
> fs/squashfs/squashfs.mk | 4 ++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/fs/squashfs/Config.in b/fs/squashfs/Config.in
> index dde2097cb7..70d4a20cf0 100644
> --- a/fs/squashfs/Config.in
> +++ b/fs/squashfs/Config.in
> @@ -5,6 +5,13 @@ config BR2_TARGET_ROOTFS_SQUASHFS
>
> if BR2_TARGET_ROOTFS_SQUASHFS
>
> +config BR2_TARGET_ROOTFS_SQUASHFS_PAD
> + bool "pad to a 4K boundary"
> + default y # legacy was always ON
> + help
> + Say 'y' here (the default) to pad the the filesystem image
> + to a 4K boundary. Say 'n' to disable padding.
> +
> choice
> prompt "Compression algorithm"
> default BR2_TARGET_ROOTFS_SQUASHFS4_GZIP
> @@ -31,4 +38,5 @@ config BR2_TARGET_ROOTFS_SQUASHFS4_ZSTD
> bool "zstd"
>
> endchoice
> +
> endif
> diff --git a/fs/squashfs/squashfs.mk b/fs/squashfs/squashfs.mk
> index 34ab048603..7a5e3e313e 100644
> --- a/fs/squashfs/squashfs.mk
> +++ b/fs/squashfs/squashfs.mk
> @@ -8,6 +8,10 @@ ROOTFS_SQUASHFS_DEPENDENCIES = host-squashfs
>
> ROOTFS_SQUASHFS_ARGS = -noappend -processors $(PARALLEL_JOBS)
>
> +ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS_PAD),)
> +ROOTFS_SQUASHFS_ARGS += -nopad
> +endif
> +
> ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS4_LZ4),y)
> ROOTFS_SQUASHFS_ARGS += -comp lz4 -Xhc
> else ifeq ($(BR2_TARGET_ROOTFS_SQUASHFS4_LZO),y)
> --
> 2.26.2
>
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-06-17 21:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-06-14 22:41 [Buildroot] [PATCH v2] fs: squashfs: Add config option to pass nopad parameter to mksquashfs Heiko Stuebner
2020-06-17 21:02 ` Yann E. MORIN
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox