[Buildroot] [PATCH v2 5/6] boot/arm-trusted-firmware: add EDK2 as BL33 option

[Buildroot] [PATCH v2 5/6] boot/arm-trusted-firmware: add EDK2 as BL33 option

[D. Olsson]

From: Dick Olsson <hi@senzilla.io>

ARM Trusted Firmware (ATF) has the ability to load EDK2 UEFI when dropping
into EL2. This is done via a new configuration option that build the BL33
payload with EDK2 images that will run in the EL2 context.

Signed-off-by: Dick Olsson <hi@senzilla.io>

---

Revision 2:

 * It was concluded that relying on variables from EDK2 is ok
  since they are expanded inside _BUILD_CMDS
 * Now relying on the more specific variable EDK2_EL2_NAME for BL33
---
 boot/arm-trusted-firmware/Config.in               | 15 ++++++++++++++-
 boot/arm-trusted-firmware/arm-trusted-firmware.mk |  8 ++++++++
 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in
index 7d0f6aa4e0..f24813f8e6 100644
--- a/boot/arm-trusted-firmware/Config.in
+++ b/boot/arm-trusted-firmware/Config.in
@@ -1,7 +1,7 @@
 config BR2_TARGET_ARM_TRUSTED_FIRMWARE
 	bool "ARM Trusted Firmware (ATF)"
 	depends on (BR2_ARM_CPU_ARMV8A || BR2_ARM_CPU_ARMV7A) && \
-           BR2_TARGET_UBOOT
+           (BR2_TARGET_UBOOT || BR2_TARGET_EDK2)
 	help
 	  Enable this option if you want to build the ATF for your ARM
 	  based embedded device.
@@ -115,6 +115,19 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE
 
 endchoice
 
+config BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33
+	bool "Use EDK2 as BL33"
+	depends on BR2_TARGET_EDK2
+	help
+	  This option allows to embed EDK2 as the BL33 part of
+	  the ARM Trusted Firmware. It ensures that the EDK2 package
+	  gets built before ATF, and that the appropriate BL33
+	  variable pointing to the EDK2 is passed when building ATF.
+
+	  Do not choose this option if you intend to build ATF and EDK2
+	  for the 'qemu_sbsa' platform. In this case, due to the EDK2
+	  build system, the dependency between ATF and EDK is reversed.
+
 config BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33
 	bool "Use U-Boot as BL33"
 	depends on BR2_TARGET_UBOOT
diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
index a3553e36cf..51a5877ba1 100644
--- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
+++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
@@ -79,6 +79,14 @@ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += AARCH32_SP=optee
 endif
 endif # BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE
 
+ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33),y)
+ARM_TRUSTED_FIRMWARE_DEPENDENCIES += edk2
+# Since the flash device name vary between platforms, we use the variable
+# provided by the EDK2 package for this. Using this variable here is OK
+# as it will expand after all dependencies are resolved, inside _BUILD_CMDS.
+ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33=$(BINARIES_DIR)/$(EDK2_EL2_NAME).fd
+endif
+
 ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33),y)
 ARM_TRUSTED_FIRMWARE_UBOOT_BIN = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE))
 ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33=$(BINARIES_DIR)/$(ARM_TRUSTED_FIRMWARE_UBOOT_BIN)
-- 
2.20.1

[Buildroot] [PATCH v2 5/6] boot/arm-trusted-firmware: add EDK2 as BL33 option

[Sergey Matyukevich]

> ARM Trusted Firmware (ATF) has the ability to load EDK2 UEFI when dropping
> into EL2. This is done via a new configuration option that build the BL33
> payload with EDK2 images that will run in the EL2 context.
> 
> Signed-off-by: Dick Olsson <hi@senzilla.io>
> 
> ---
> 
> Revision 2:
> 
>  * It was concluded that relying on variables from EDK2 is ok
>   since they are expanded inside _BUILD_CMDS
>  * Now relying on the more specific variable EDK2_EL2_NAME for BL33
> ---
>  boot/arm-trusted-firmware/Config.in               | 15 ++++++++++++++-
>  boot/arm-trusted-firmware/arm-trusted-firmware.mk |  8 ++++++++
>  2 files changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in
> index 7d0f6aa4e0..f24813f8e6 100644
> --- a/boot/arm-trusted-firmware/Config.in
> +++ b/boot/arm-trusted-firmware/Config.in
> @@ -1,7 +1,7 @@
>  config BR2_TARGET_ARM_TRUSTED_FIRMWARE
>  	bool "ARM Trusted Firmware (ATF)"
>  	depends on (BR2_ARM_CPU_ARMV8A || BR2_ARM_CPU_ARMV7A) && \
> -           BR2_TARGET_UBOOT
> +           (BR2_TARGET_UBOOT || BR2_TARGET_EDK2)
>  	help
>  	  Enable this option if you want to build the ATF for your ARM
>  	  based embedded device.
> @@ -115,6 +115,19 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE
>  
>  endchoice
>  
> +config BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33
> +	bool "Use EDK2 as BL33"
> +	depends on BR2_TARGET_EDK2
> +	help
> +	  This option allows to embed EDK2 as the BL33 part of
> +	  the ARM Trusted Firmware. It ensures that the EDK2 package
> +	  gets built before ATF, and that the appropriate BL33
> +	  variable pointing to the EDK2 is passed when building ATF.
> +
> +	  Do not choose this option if you intend to build ATF and EDK2
> +	  for the 'qemu_sbsa' platform. In this case, due to the EDK2
> +	  build system, the dependency between ATF and EDK is reversed.

Is it possible to 'automate' this restriction by some Config.in rule,
e.g. depends on !BR2_TARGET_EDK2_PLATFORM_QEMU_SBSA ?

> +
>  config BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33
>  	bool "Use U-Boot as BL33"
>  	depends on BR2_TARGET_UBOOT
> diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
> index a3553e36cf..51a5877ba1 100644
> --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
> +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
> @@ -79,6 +79,14 @@ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += AARCH32_SP=optee
>  endif
>  endif # BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE
>  
> +ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33),y)
> +ARM_TRUSTED_FIRMWARE_DEPENDENCIES += edk2
> +# Since the flash device name vary between platforms, we use the variable
> +# provided by the EDK2 package for this. Using this variable here is OK
> +# as it will expand after all dependencies are resolved, inside _BUILD_CMDS.
> +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33=$(BINARIES_DIR)/$(EDK2_EL2_NAME).fd
> +endif
> +
>  ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33),y)
>  ARM_TRUSTED_FIRMWARE_UBOOT_BIN = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE))
>  ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33=$(BINARIES_DIR)/$(ARM_TRUSTED_FIRMWARE_UBOOT_BIN)

This option is not added but not used in this patch series. I see that
it should not be added for SBSA reference platform since in that case
EDK2 embeds ATF binaries.

Is it prepared for the upcoming new boards or is it supposed to be used
by aarch64_efi_defconfig ? In the latter case ATF as well as this new
BL33 option has to be explicitly specified in board config.

Regards,
Sergey

[Buildroot] [PATCH v2 5/6] boot/arm-trusted-firmware: add EDK2 as BL33 option

[D. Olsson]

Hi Sergey,

On Monday, 27 July 2020 10:19, Sergey Matyukevich <geomatsi@gmail.com> wrote:

> Is it possible to 'automate' this restriction by someConfig.in rule,
> e.g. depends on !BR2_TARGET_EDK2_PLATFORM_QEMU_SBSA ?

Yes, that should be possible. I'll address this in the next revision.

> This option is not added but not used in this patch series. I see that
> it should not be added for SBSA reference platform since in that case
> EDK2 embeds ATF binaries.
>
> Is it prepared for the upcoming new boards or is it supposed to be used
> by aarch64_efi_defconfig ? In the latter case ATF as well as this new
> BL33 option has to be explicitly specified in board config.

I've intentionally kept the initial revisions of this series simple and
didn't want to introduce yet another board (other than the SBSA board).

But if you think introducing a usage of the configuration I think either
qemu_aarch64_virt_efi_defconfig or arm_foundationv8_efi_defconfig would
make sense.
The former would be easier and more accessible to test by most people.
But the latter would be a more accurate emulation of something that
would resemble the SBBR standard.



Cheers

D. Olsson
PGP: 8204A8CD