* [Buildroot] [PATCH 1/1] configs/rock64: update defconfig
@ 2020-12-15 0:49 Min Xu
2020-12-15 11:28 ` michal.lyszczek at bofc.pl
2020-12-31 16:41 ` Thomas Petazzoni
0 siblings, 2 replies; 4+ messages in thread
From: Min Xu @ 2020-12-15 0:49 UTC (permalink / raw)
To: buildroot
Revert "configs/rock64_defconfig: remove defconfig" a5fa2469e6506ea4f5a91739aa099f63a10e45ce
bump uboot from 2017.09 to release-2020-07 from ayufan-rock64/linux-mainline-u-boot
Signed-off-by: Min Xu <xuminready@gmail.com>
---
DEVELOPERS | 2 +
board/pine64/rock64/extlinux.conf | 4 +
board/pine64/rock64/genimage.cfg | 23 +++++
...328-needs-itb-image-to-boot-properly.patch | 32 +++++++
board/pine64/rock64/post-build.sh | 9 ++
board/pine64/rock64/readme.txt | 95 +++++++++++++++++++
configs/rock64_defconfig | 38 ++++++++
7 files changed, 203 insertions(+)
create mode 100644 board/pine64/rock64/extlinux.conf
create mode 100644 board/pine64/rock64/genimage.cfg
create mode 100644 board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
create mode 100755 board/pine64/rock64/post-build.sh
create mode 100644 board/pine64/rock64/readme.txt
create mode 100644 configs/rock64_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index a2c7f7f..1944cbb 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1858,6 +1858,8 @@ F: package/libavl/
N: Micha? ?yszczek <michal.lyszczek@bofc.pl>
F: board/altera/socrates_cyclone5/
+F: board/pine64/rock64
+F: configs/rock64_defconfig
F: configs/socrates_cyclone5_defconfig
F: package/netifrc/
F: package/openrc/
diff --git a/board/pine64/rock64/extlinux.conf b/board/pine64/rock64/extlinux.conf
new file mode 100644
index 0000000..bf71982
--- /dev/null
+++ b/board/pine64/rock64/extlinux.conf
@@ -0,0 +1,4 @@
+label rock64-buildroot
+ kernel /boot/Image
+ devicetree /boot/rk3328-rock64.dtb
+ append console=ttyS2,1500000n8 root=/dev/mmcblk0p1 ro rootwait
diff --git a/board/pine64/rock64/genimage.cfg b/board/pine64/rock64/genimage.cfg
new file mode 100644
index 0000000..0b5a0d8
--- /dev/null
+++ b/board/pine64/rock64/genimage.cfg
@@ -0,0 +1,23 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition uboot-spl {
+ in-partition-table = "no"
+ image = "u-boot-tpl-spl.img"
+ offset = 32768 # 512 * 0x40 from start of sd card
+ }
+
+ partition uboot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 262144 # 512 * 0x200 from start of sd card
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ bootable = "yes"
+ image = "rootfs.ext2"
+ size = 500M
+ }
+}
diff --git a/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch b/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
new file mode 100644
index 0000000..2d35b78
--- /dev/null
+++ b/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
@@ -0,0 +1,32 @@
+From 211bf049084e6e374dac253138fa813682910146 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Micha=C5=82=20=C5=81yszczek?= <michal.lyszczek@bofc.pl>
+Date: Tue, 5 Feb 2019 22:08:54 +0100
+Subject: [PATCH] Makefile: rk3328 needs itb image to boot properly
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Micha? ?yszczek <michal.lyszczek@bofc.pl>
+---
+ Makefile | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/Makefile b/Makefile
+index 8086f3c93e..a6425b5b03 100644
+--- a/Makefile
++++ b/Makefile
+@@ -799,6 +799,11 @@ ifneq ($(BUILD_ROM),)
+ ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+ endif
+
++# rk3328 needs itb image to boot properly
++ifeq ($(CONFIG_ROCKCHIP_RK3328),y)
++ALL-y += u-boot.itb
++endif
++
+ # enable combined SPL/u-boot/dtb rules for tegra
+ ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
+ ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
+--
+2.18.1
+
diff --git a/board/pine64/rock64/post-build.sh b/board/pine64/rock64/post-build.sh
new file mode 100755
index 0000000..26b53cb
--- /dev/null
+++ b/board/pine64/rock64/post-build.sh
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3328 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
+cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl.bin > $BINARIES_DIR/u-boot-tpl-spl.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/pine64/rock64/readme.txt b/board/pine64/rock64/readme.txt
new file mode 100644
index 0000000..029c676
--- /dev/null
+++ b/board/pine64/rock64/readme.txt
@@ -0,0 +1,95 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Rock64. With this default configuration you
+can log in into board via uart and look around.
+
+Board homepage: https://www.pine64.org/?page_id=7147
+
+Build
+=====
+
+First, load rock64 config for buildroot
+
+ $ make rock64_defconfig
+
+Optionally make changes to buildroot config (to install more programs)
+
+ $ make menuconfig
+
+And then build everything
+
+ $ make
+
+When completed, following files will be generated in output/images directory:
+
+ .
+ ??? Image
+ ??? bl31.bin
+ ??? bl31.elf
+ ??? rk3328-rock64.dtb
+ ??? rootfs.ext2
+ ??? rootfs.ext4 -> rootfs.ext2
+ ??? rootfs.tar
+ ??? sdcard.img
+ ??? u-boot-spl.bin
+ ??? u-boot-tpl-spl.img
+ ??? u-boot-tpl.bin
+ ??? u-boot-tpl.img
+ ??? u-boot.bin
+ ??? u-boot.itb
+
+Creating bootable SD card
+=========================
+
+!!! THIS COMMAND MAY WIPE YOUR DISK!
+!!! MAKE SURE YOU PASSED CORRECT DEVICE!
+!!! OR IT THIS WILL WIPE YOUR DISK!
+
+Simply invoke (as root)
+
+ # dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device (not partition), of= argument may also be
+/dev/mmcblk0 if you are using built-in sd card reader.
+
+Runtime
+=======
+
+Login
+-----
+
+By default, buildroot has no password, just type 'root' as login user, and
+you will be logged in.
+
+Serial console
+--------------
+
+Serial console needs to be connected to pins (into 40pin rpi compatible part)
+
+pin 6: gnd
+pin 8: tx
+pin 10: rx
+
+Pin numbers are printed on board.
+
+Uart configuration is not standard. Rock64 uses 1500000 (1,5M) baudrate
+with standard 8n1.
+
+Ethernet
+--------
+
+To enable ethernet you need to load modules for it:
+
+# modprobe stmmac
+# modprobe dwmac-rk
+
+and since by default there is no dhcp installed, you need to configure ip
+address, remember to change address to fit your network.
+
+# ifconfig eth0 up
+# ip addr add 10.1.1.180/24 dev eth0
+# ping 10.1.1.1
+PING 10.1.1.1 (10.1.1.1): 56 data bytes
+64 bytes from 10.1.1.1: seq=0 ttl=64 time=0.695 ms
diff --git a/configs/rock64_defconfig b/configs/rock64_defconfig
new file mode 100644
index 0000000..df03e35
--- /dev/null
+++ b/configs/rock64_defconfig
@@ -0,0 +1,38 @@
+BR2_aarch64=y
+BR2_GLOBAL_PATCH_DIR="board/pine64/rock64/patches"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS2"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rock64/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rock64/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.19"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-rock64"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="bl31/*.elf"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/ayufan-rock64/linux-mainline-u-boot.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="release-2020-07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock64-rk3328"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin tpl/u-boot-tpl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] configs/rock64: update defconfig
2020-12-15 0:49 [Buildroot] [PATCH 1/1] configs/rock64: update defconfig Min Xu
@ 2020-12-15 11:28 ` michal.lyszczek at bofc.pl
2020-12-31 16:41 ` Thomas Petazzoni
1 sibling, 0 replies; 4+ messages in thread
From: michal.lyszczek at bofc.pl @ 2020-12-15 11:28 UTC (permalink / raw)
To: buildroot
On 2020-12-15 00:49:03, Min Xu wrote:
> Revert "configs/rock64_defconfig: remove defconfig" a5fa2469e6506ea4f5a91739aa099f63a10e45ce
>
> bump uboot from 2017.09 to release-2020-07 from ayufan-rock64/linux-mainline-u-boot
>
> Signed-off-by: Min Xu <xuminready@gmail.com>
Tested-by: Micha? ?yszczek <michal.lyszczek@bofc.pl>
> ---
> DEVELOPERS | 2 +
> board/pine64/rock64/extlinux.conf | 4 +
> board/pine64/rock64/genimage.cfg | 23 +++++
> ...328-needs-itb-image-to-boot-properly.patch | 32 +++++++
> board/pine64/rock64/post-build.sh | 9 ++
> board/pine64/rock64/readme.txt | 95 +++++++++++++++++++
> configs/rock64_defconfig | 38 ++++++++
> 7 files changed, 203 insertions(+)
> create mode 100644 board/pine64/rock64/extlinux.conf
> create mode 100644 board/pine64/rock64/genimage.cfg
> create mode 100644 board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
> create mode 100755 board/pine64/rock64/post-build.sh
> create mode 100644 board/pine64/rock64/readme.txt
> create mode 100644 configs/rock64_defconfig
>
> diff --git a/DEVELOPERS b/DEVELOPERS
> index a2c7f7f..1944cbb 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -1858,6 +1858,8 @@ F: package/libavl/
>
> N: Micha? ?yszczek <michal.lyszczek@bofc.pl>
> F: board/altera/socrates_cyclone5/
> +F: board/pine64/rock64
> +F: configs/rock64_defconfig
> F: configs/socrates_cyclone5_defconfig
> F: package/netifrc/
> F: package/openrc/
> diff --git a/board/pine64/rock64/extlinux.conf b/board/pine64/rock64/extlinux.conf
> new file mode 100644
> index 0000000..bf71982
> --- /dev/null
> +++ b/board/pine64/rock64/extlinux.conf
> @@ -0,0 +1,4 @@
> +label rock64-buildroot
> + kernel /boot/Image
> + devicetree /boot/rk3328-rock64.dtb
> + append console=ttyS2,1500000n8 root=/dev/mmcblk0p1 ro rootwait
> diff --git a/board/pine64/rock64/genimage.cfg b/board/pine64/rock64/genimage.cfg
> new file mode 100644
> index 0000000..0b5a0d8
> --- /dev/null
> +++ b/board/pine64/rock64/genimage.cfg
> @@ -0,0 +1,23 @@
> +image sdcard.img {
> + hdimage {
> + }
> +
> + partition uboot-spl {
> + in-partition-table = "no"
> + image = "u-boot-tpl-spl.img"
> + offset = 32768 # 512 * 0x40 from start of sd card
> + }
> +
> + partition uboot {
> + in-partition-table = "no"
> + image = "u-boot.itb"
> + offset = 262144 # 512 * 0x200 from start of sd card
> + }
> +
> + partition rootfs {
> + partition-type = 0x83
> + bootable = "yes"
> + image = "rootfs.ext2"
> + size = 500M
> + }
> +}
> diff --git a/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch b/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
> new file mode 100644
> index 0000000..2d35b78
> --- /dev/null
> +++ b/board/pine64/rock64/patches/uboot/0001-Makefile-rk3328-needs-itb-image-to-boot-properly.patch
> @@ -0,0 +1,32 @@
> +From 211bf049084e6e374dac253138fa813682910146 Mon Sep 17 00:00:00 2001
> +From: =?UTF-8?q?Micha=C5=82=20=C5=81yszczek?= <michal.lyszczek@bofc.pl>
> +Date: Tue, 5 Feb 2019 22:08:54 +0100
> +Subject: [PATCH] Makefile: rk3328 needs itb image to boot properly
> +MIME-Version: 1.0
> +Content-Type: text/plain; charset=UTF-8
> +Content-Transfer-Encoding: 8bit
> +
> +Signed-off-by: Micha? ?yszczek <michal.lyszczek@bofc.pl>
> +---
> + Makefile | 5 +++++
> + 1 file changed, 5 insertions(+)
> +
> +diff --git a/Makefile b/Makefile
> +index 8086f3c93e..a6425b5b03 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -799,6 +799,11 @@ ifneq ($(BUILD_ROM),)
> + ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
> + endif
> +
> ++# rk3328 needs itb image to boot properly
> ++ifeq ($(CONFIG_ROCKCHIP_RK3328),y)
> ++ALL-y += u-boot.itb
> ++endif
> ++
> + # enable combined SPL/u-boot/dtb rules for tegra
> + ifeq ($(CONFIG_TEGRA)$(CONFIG_SPL),yy)
> + ALL-y += u-boot-tegra.bin u-boot-nodtb-tegra.bin
> +--
> +2.18.1
> +
> diff --git a/board/pine64/rock64/post-build.sh b/board/pine64/rock64/post-build.sh
> new file mode 100755
> index 0000000..26b53cb
> --- /dev/null
> +++ b/board/pine64/rock64/post-build.sh
> @@ -0,0 +1,9 @@
> +#!/bin/sh
> +
> +MKIMAGE=$HOST_DIR/bin/mkimage
> +BOARD_DIR="$(dirname $0)"
> +
> +$MKIMAGE -n rk3328 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
> +cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl.bin > $BINARIES_DIR/u-boot-tpl-spl.img
> +
> +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
> diff --git a/board/pine64/rock64/readme.txt b/board/pine64/rock64/readme.txt
> new file mode 100644
> index 0000000..029c676
> --- /dev/null
> +++ b/board/pine64/rock64/readme.txt
> @@ -0,0 +1,95 @@
> +Intro
> +=====
> +
> +This default configuration will allow you to start experimenting with the
> +buildroot environment for the Rock64. With this default configuration you
> +can log in into board via uart and look around.
> +
> +Board homepage: https://www.pine64.org/?page_id=7147
> +
> +Build
> +=====
> +
> +First, load rock64 config for buildroot
> +
> + $ make rock64_defconfig
> +
> +Optionally make changes to buildroot config (to install more programs)
> +
> + $ make menuconfig
> +
> +And then build everything
> +
> + $ make
> +
> +When completed, following files will be generated in output/images directory:
> +
> + .
> + ??? Image
> + ??? bl31.bin
> + ??? bl31.elf
> + ??? rk3328-rock64.dtb
> + ??? rootfs.ext2
> + ??? rootfs.ext4 -> rootfs.ext2
> + ??? rootfs.tar
> + ??? sdcard.img
> + ??? u-boot-spl.bin
> + ??? u-boot-tpl-spl.img
> + ??? u-boot-tpl.bin
> + ??? u-boot-tpl.img
> + ??? u-boot.bin
> + ??? u-boot.itb
> +
> +Creating bootable SD card
> +=========================
> +
> +!!! THIS COMMAND MAY WIPE YOUR DISK!
> +!!! MAKE SURE YOU PASSED CORRECT DEVICE!
> +!!! OR IT THIS WILL WIPE YOUR DISK!
> +
> +Simply invoke (as root)
> +
> + # dd if=output/images/sdcard.img of=/dev/sdX && sync
> +
> +Where X is your SD card device (not partition), of= argument may also be
> +/dev/mmcblk0 if you are using built-in sd card reader.
> +
> +Runtime
> +=======
> +
> +Login
> +-----
> +
> +By default, buildroot has no password, just type 'root' as login user, and
> +you will be logged in.
> +
> +Serial console
> +--------------
> +
> +Serial console needs to be connected to pins (into 40pin rpi compatible part)
> +
> +pin 6: gnd
> +pin 8: tx
> +pin 10: rx
> +
> +Pin numbers are printed on board.
> +
> +Uart configuration is not standard. Rock64 uses 1500000 (1,5M) baudrate
> +with standard 8n1.
> +
> +Ethernet
> +--------
> +
> +To enable ethernet you need to load modules for it:
> +
> +# modprobe stmmac
> +# modprobe dwmac-rk
> +
> +and since by default there is no dhcp installed, you need to configure ip
> +address, remember to change address to fit your network.
> +
> +# ifconfig eth0 up
> +# ip addr add 10.1.1.180/24 dev eth0
> +# ping 10.1.1.1
> +PING 10.1.1.1 (10.1.1.1): 56 data bytes
> +64 bytes from 10.1.1.1: seq=0 ttl=64 time=0.695 ms
> diff --git a/configs/rock64_defconfig b/configs/rock64_defconfig
> new file mode 100644
> index 0000000..df03e35
> --- /dev/null
> +++ b/configs/rock64_defconfig
> @@ -0,0 +1,38 @@
> +BR2_aarch64=y
> +BR2_GLOBAL_PATCH_DIR="board/pine64/rock64/patches"
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttyS2"
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rock64/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rock64/genimage.cfg"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.19"
> +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-rock64"
> +BR2_LINUX_KERNEL_INSTALL_TARGET=y
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="128M"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="bl31/*.elf"
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/ayufan-rock64/linux-mainline-u-boot.git"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="release-2020-07"
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock64-rk3328"
> +BR2_TARGET_UBOOT_NEEDS_DTC=y
> +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
> +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
> +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin tpl/u-boot-tpl.bin"
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
> --
> 2.20.1
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20201215/af3ddb4e/attachment.asc>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] configs/rock64: update defconfig
2020-12-15 0:49 [Buildroot] [PATCH 1/1] configs/rock64: update defconfig Min Xu
2020-12-15 11:28 ` michal.lyszczek at bofc.pl
@ 2020-12-31 16:41 ` Thomas Petazzoni
2020-12-31 22:15 ` xu min
1 sibling, 1 reply; 4+ messages in thread
From: Thomas Petazzoni @ 2020-12-31 16:41 UTC (permalink / raw)
To: buildroot
Hello,
On Tue, 15 Dec 2020 00:49:03 +0000
Min Xu <xuminready@gmail.com> wrote:
> Revert "configs/rock64_defconfig: remove defconfig" a5fa2469e6506ea4f5a91739aa099f63a10e45ce
>
> bump uboot from 2017.09 to release-2020-07 from ayufan-rock64/linux-mainline-u-boot
>
> Signed-off-by: Min Xu <xuminready@gmail.com>
Thanks, I've applied to master, with two changes. First, I changed the
commit title to "configs/rock64: new defconfig", as this commit is not
"updating" a defconfig, it's really adding a new one.
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="bl31/*.elf"
I've added a fixed version of ATF here instead of relying on the
default "latest" version, which can change over time.
Thanks,
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] configs/rock64: update defconfig
2020-12-31 16:41 ` Thomas Petazzoni
@ 2020-12-31 22:15 ` xu min
0 siblings, 0 replies; 4+ messages in thread
From: xu min @ 2020-12-31 22:15 UTC (permalink / raw)
To: buildroot
Awesome, thanks!
On Thu, Dec 31, 2020 at 8:41 AM Thomas Petazzoni <
thomas.petazzoni@bootlin.com> wrote:
> Hello,
>
> On Tue, 15 Dec 2020 00:49:03 +0000
> Min Xu <xuminready@gmail.com> wrote:
>
> > Revert "configs/rock64_defconfig: remove defconfig"
> a5fa2469e6506ea4f5a91739aa099f63a10e45ce
> >
> > bump uboot from 2017.09 to release-2020-07 from
> ayufan-rock64/linux-mainline-u-boot
> >
> > Signed-off-by: Min Xu <xuminready@gmail.com>
>
> Thanks, I've applied to master, with two changes. First, I changed the
> commit title to "configs/rock64: new defconfig", as this commit is not
> "updating" a defconfig, it's really adding a new one.
>
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328"
> > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="bl31/*.elf"
>
> I've added a fixed version of ATF here instead of relying on the
> default "latest" version, which can change over time.
>
> Thanks,
>
> Thomas
> --
> Thomas Petazzoni, CTO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
--
*Best Regards*
*XuMin's Ready?*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20201231/20cfe1c6/attachment.html>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-12-31 22:15 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-12-15 0:49 [Buildroot] [PATCH 1/1] configs/rock64: update defconfig Min Xu
2020-12-15 11:28 ` michal.lyszczek at bofc.pl
2020-12-31 16:41 ` Thomas Petazzoni
2020-12-31 22:15 ` xu min
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox