* [Buildroot] No rule to make target 'host-python !! @ 2021-01-22 22:21 manu f 2021-01-22 22:32 ` manu f 2021-01-22 22:53 ` manu f 0 siblings, 2 replies; 14+ messages in thread From: manu f @ 2021-01-22 22:21 UTC (permalink / raw) To: buildroot Hello all I got this error and dont know what to do with that ! make[1]: *** No rule to make target 'host-python', needed by '/home/user/cleta_buildroot/output/build/libevdev-1.8.0/.stamp_configured'. Stop. make: *** [Makefile:84: _all] Error 2 make: Leaving directory '/home/user/cleta_buildroot/buildroot' user at LinuxDev:~/cleta_buildroot$ I already compiled with success bet I add some packages and got this. I try to remove my change but got this error again... strange Could I have a guidance to find from where problem come ? (I compile the 2020.02.8 buildroot version for a specific imx6 board with buildroot toolchain.) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210122/aedf3e02/attachment.html> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-22 22:21 [Buildroot] No rule to make target 'host-python !! manu f @ 2021-01-22 22:32 ` manu f 2021-01-22 22:53 ` manu f 1 sibling, 0 replies; 14+ messages in thread From: manu f @ 2021-01-22 22:32 UTC (permalink / raw) To: buildroot and I have no output/build/libevdev-1.8.0 directory ! Le ven. 22 janv. 2021 ? 23:21, manu f <e.fiancette@gmail.com> a ?crit : > Hello all > > I got this error and dont know what to do with that ! > > make[1]: *** No rule to make target 'host-python', needed by > '/home/user/cleta_buildroot/output/build/libevdev-1.8.0/.stamp_configured'. > Stop. > make: *** [Makefile:84: _all] Error 2 > make: Leaving directory '/home/user/cleta_buildroot/buildroot' > user at LinuxDev:~/cleta_buildroot$ > > > I already compiled with success bet I add some packages and got this. > I try to remove my change but got this error again... strange > Could I have a guidance to find from where problem come ? > > (I compile the 2020.02.8 buildroot version for a specific imx6 board with > buildroot toolchain.) > > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210122/e63685be/attachment.html> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-22 22:21 [Buildroot] No rule to make target 'host-python !! manu f 2021-01-22 22:32 ` manu f @ 2021-01-22 22:53 ` manu f 2021-01-23 10:48 ` Thomas Petazzoni 1 sibling, 1 reply; 14+ messages in thread From: manu f @ 2021-01-22 22:53 UTC (permalink / raw) To: buildroot ok, I remove libevdev in Target package =>libraries=>Other and its copile without error! (But I dont know if I realy need this lib... ) Well why it no compile with libdevdev ? @ Thomas Petazzoni I saw you already got problem and make patch for host-python interpreter...is there something to see with ? Regards Le ven. 22 janv. 2021 ? 23:21, manu f <e.fiancette@gmail.com> a ?crit : > Hello all > > I got this error and dont know what to do with that ! > > make[1]: *** No rule to make target 'host-python', needed by > '/home/user/cleta_buildroot/output/build/libevdev-1.8.0/.stamp_configured'. > Stop. > make: *** [Makefile:84: _all] Error 2 > make: Leaving directory '/home/user/cleta_buildroot/buildroot' > user at LinuxDev:~/cleta_buildroot$ > > > I already compiled with success bet I add some packages and got this. > I try to remove my change but got this error again... strange > Could I have a guidance to find from where problem come ? > > (I compile the 2020.02.8 buildroot version for a specific imx6 board with > buildroot toolchain.) > > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210122/2d62645f/attachment.html> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-22 22:53 ` manu f @ 2021-01-23 10:48 ` Thomas Petazzoni 2021-01-24 11:40 ` manu f 0 siblings, 1 reply; 14+ messages in thread From: Thomas Petazzoni @ 2021-01-23 10:48 UTC (permalink / raw) To: buildroot On Fri, 22 Jan 2021 23:53:30 +0100 manu f <e.fiancette@gmail.com> wrote: > ok, I remove libevdev in Target package =>libraries=>Other and its copile > without error! > > (But I dont know if I realy need this lib... ) > > Well why it no compile with libdevdev ? > @ Thomas Petazzoni I saw you already got problem and make patch for > host-python interpreter...is there something to see with ? host-python is definitely part of Buildroot 2020.02, so I'm not sure how you can get this error. We would need more details, such as the complete .config that reproduces the issue. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-23 10:48 ` Thomas Petazzoni @ 2021-01-24 11:40 ` manu f 2021-01-24 15:14 ` Peter Seiderer 0 siblings, 1 reply; 14+ messages in thread From: manu f @ 2021-01-24 11:40 UTC (permalink / raw) To: buildroot here my complete .config Le sam. 23 janv. 2021 ? 11:48, Thomas Petazzoni < thomas.petazzoni@bootlin.com> a ?crit : > On Fri, 22 Jan 2021 23:53:30 +0100 > manu f <e.fiancette@gmail.com> wrote: > > > ok, I remove libevdev in Target package =>libraries=>Other and its copile > > without error! > > > > (But I dont know if I realy need this lib... ) > > > > Well why it no compile with libdevdev ? > > @ Thomas Petazzoni I saw you already got problem and make patch for > > host-python interpreter...is there something to see with ? > > host-python is definitely part of Buildroot 2020.02, so I'm not sure > how you can get this error. We would need more details, such as the > complete .config that reproduces the issue. > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210124/1682bb37/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: .config Type: application/octet-stream Size: 130473 bytes Desc: not available URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210124/1682bb37/attachment-0001.obj> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-24 11:40 ` manu f @ 2021-01-24 15:14 ` Peter Seiderer 2021-01-24 16:08 ` manu f 0 siblings, 1 reply; 14+ messages in thread From: Peter Seiderer @ 2021-01-24 15:14 UTC (permalink / raw) To: buildroot Hello, On Sun, 24 Jan 2021 12:40:31 +0100, manu f <e.fiancette@gmail.com> wrote: > here my complete .config Importing your .config into a plain buildroot-2020.02.8 gives the following diff: @@ -1,9 +1,8 @@ # # Automatically generated file; DO NOT EDIT. -# Buildroot 2020.02.8-dirty Configuration +# Buildroot 2020.02.8 Configuration # BR2_HAVE_DOT_CONFIG=y -BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external" BR2_HOST_GCC_AT_LEAST_4_9=y BR2_HOST_GCC_AT_LEAST_5=y BR2_HOST_GCC_AT_LEAST_6=y @@ -1446,6 +1445,7 @@ # # BR2_PACKAGE_PERL is not set # BR2_PACKAGE_PHP is not set +# BR2_PACKAGE_PYTHON is not set BR2_PACKAGE_PYTHON3=y # BR2_PACKAGE_PYTHON3_PY_ONLY is not set BR2_PACKAGE_PYTHON3_PYC_ONLY=y @@ -4174,6 +4174,7 @@ # BR2_PACKAGE_HOST_PKGCONF is not set # BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT is not set # BR2_PACKAGE_HOST_PWGEN is not set +# BR2_PACKAGE_HOST_PYTHON is not set # BR2_PACKAGE_HOST_PYTHON_CYTHON is not set # BR2_PACKAGE_HOST_PYTHON_LXML is not set # BR2_PACKAGE_HOST_PYTHON_SIX is not set @@ -4876,17 +4877,3 @@ # BR2_VFP_FLOAT is not set # BR2_PACKAGE_GCC_TARGET is not set # BR2_HAVE_DEVFILES is not set - -# -# External options -# - -# -# br2-external tree for atos projects (in /home/user/cleta_buildroot/br-external) -# -BR2_PACKAGE_BACKLIGHT_MONITORING=y -BR2_PACKAGE_TEST_UART=y -BR2_PACKAGE_APP_MOUNT=y -BR2_PACKAGE_APP_UPDATER=y -BR2_NODE_JS_14x=y -# BR2_PYTHON_37 is not set Note the lines with 'Buildroot 2020.02.8-dirty', '-BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external"', '+# BR2_PACKAGE_PYTHON is not set' and '-# BR2_PYTHON_37 is not set', so most likely something with your local change and/or br-external changing the package python to python37? Otherwise the config compiles fine here (even with libevdev enabled)... Regards, Peter > > Le sam. 23 janv. 2021 ? 11:48, Thomas Petazzoni < > thomas.petazzoni at bootlin.com> a ?crit : > > > On Fri, 22 Jan 2021 23:53:30 +0100 > > manu f <e.fiancette@gmail.com> wrote: > > > > > ok, I remove libevdev in Target package =>libraries=>Other and its copile > > > without error! > > > > > > (But I dont know if I realy need this lib... ) > > > > > > Well why it no compile with libdevdev ? > > > @ Thomas Petazzoni I saw you already got problem and make patch for > > > host-python interpreter...is there something to see with ? > > > > host-python is definitely part of Buildroot 2020.02, so I'm not sure > > how you can get this error. We would need more details, such as the > > complete .config that reproduces the issue. > > > > Thomas > > -- > > Thomas Petazzoni, CTO, Bootlin > > Embedded Linux and Kernel engineering > > https://bootlin.com > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-24 15:14 ` Peter Seiderer @ 2021-01-24 16:08 ` manu f 2021-01-24 16:39 ` Peter Seiderer 0 siblings, 1 reply; 14+ messages in thread From: manu f @ 2021-01-24 16:08 UTC (permalink / raw) To: buildroot Thanks peter. What's mean Buildroot 2020.02.8-dirty? About python37, yes I add this custom package but like you see I didn't select it. this config is without livdevdev and it compile right. but if I select it I had th error I gave (do you think it could be a problem if I not set libdevdev, I realy not sure I need it, sorry I didn't completly setupp this buildroot jus modify some aspect and I am far to master all). But its is strange that I have BR2_PACKAGE_PYTHON not set. I will look later (I am not on my linux computer), I think I even havent pithon item in menu-config... Is this mean I have a problem with python dependencies ? I will check the dependencies logic. Peter, Its very strange that at your side you could compile with libdevdev set and not me. Do you have an idea wher I could search? Many thanks for helping. Regards. Emmanuel Le dim. 24 janv. 2021 ? 16:14, Peter Seiderer <ps.report@gmx.net> a ?crit : > Hello, > > On Sun, 24 Jan 2021 12:40:31 +0100, manu f <e.fiancette@gmail.com> wrote: > > > here my complete .config > > Importing your .config into a plain buildroot-2020.02.8 gives > the following diff: > > @@ -1,9 +1,8 @@ > # > # Automatically generated file; DO NOT EDIT. > -# Buildroot 2020.02.8-dirty Configuration > +# Buildroot 2020.02.8 Configuration > # > BR2_HAVE_DOT_CONFIG=y > -BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external" > BR2_HOST_GCC_AT_LEAST_4_9=y > BR2_HOST_GCC_AT_LEAST_5=y > BR2_HOST_GCC_AT_LEAST_6=y > @@ -1446,6 +1445,7 @@ > # > # BR2_PACKAGE_PERL is not set > # BR2_PACKAGE_PHP is not set > +# BR2_PACKAGE_PYTHON is not set > BR2_PACKAGE_PYTHON3=y > # BR2_PACKAGE_PYTHON3_PY_ONLY is not set > BR2_PACKAGE_PYTHON3_PYC_ONLY=y > @@ -4174,6 +4174,7 @@ > # BR2_PACKAGE_HOST_PKGCONF is not set > # BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT is not set > # BR2_PACKAGE_HOST_PWGEN is not set > +# BR2_PACKAGE_HOST_PYTHON is not set > # BR2_PACKAGE_HOST_PYTHON_CYTHON is not set > # BR2_PACKAGE_HOST_PYTHON_LXML is not set > # BR2_PACKAGE_HOST_PYTHON_SIX is not set > @@ -4876,17 +4877,3 @@ > # BR2_VFP_FLOAT is not set > # BR2_PACKAGE_GCC_TARGET is not set > # BR2_HAVE_DEVFILES is not set > - > -# > -# External options > -# > - > -# > -# br2-external tree for atos projects (in > /home/user/cleta_buildroot/br-external) > -# > -BR2_PACKAGE_BACKLIGHT_MONITORING=y > -BR2_PACKAGE_TEST_UART=y > -BR2_PACKAGE_APP_MOUNT=y > -BR2_PACKAGE_APP_UPDATER=y > -BR2_NODE_JS_14x=y > -# BR2_PYTHON_37 is not set > > > Note the lines with 'Buildroot 2020.02.8-dirty', > '-BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external"', > '+# BR2_PACKAGE_PYTHON is not set' and '-# BR2_PYTHON_37 is not set', > so most likely something with your local change and/or br-external > changing the package python to python37? > > Otherwise the config compiles fine here (even with libevdev enabled)... > > Regards, > Peter > > > > > > Le sam. 23 janv. 2021 ? 11:48, Thomas Petazzoni < > > thomas.petazzoni at bootlin.com> a ?crit : > > > > > On Fri, 22 Jan 2021 23:53:30 +0100 > > > manu f <e.fiancette@gmail.com> wrote: > > > > > > > ok, I remove libevdev in Target package =>libraries=>Other and its > copile > > > > without error! > > > > > > > > (But I dont know if I realy need this lib... ) > > > > > > > > Well why it no compile with libdevdev ? > > > > @ Thomas Petazzoni I saw you already got problem and make patch for > > > > host-python interpreter...is there something to see with ? > > > > > > host-python is definitely part of Buildroot 2020.02, so I'm not sure > > > how you can get this error. We would need more details, such as the > > > complete .config that reproduces the issue. > > > > > > Thomas > > > -- > > > Thomas Petazzoni, CTO, Bootlin > > > Embedded Linux and Kernel engineering > > > https://bootlin.com > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210124/c01d6bf6/attachment.html> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-24 16:08 ` manu f @ 2021-01-24 16:39 ` Peter Seiderer 2021-01-24 21:27 ` manu f 0 siblings, 1 reply; 14+ messages in thread From: Peter Seiderer @ 2021-01-24 16:39 UTC (permalink / raw) To: buildroot Hello Emmanuel, On Sun, 24 Jan 2021 17:08:21 +0100, manu f <e.fiancette@gmail.com> wrote: > Thanks peter. > What's mean Buildroot 2020.02.8-dirty? This indicates normally a buildroot git repository at version 2020.02.8 (tag/branch) with local changes ('dirty')... > > About python37, yes I add this custom package but like you see I didn't > select it. But the line '+# BR2_PACKAGE_PYTHON is not set' indicates that there is no python package any longer with your build setup (and so no host-python available needed by libevdev)... Hard to judge without knowledge of your br-external but I would suspect it contains a package/python directory with a python.mk file without an '$(eval $(host-autotools-package))' line (or something like that) and a Config.in file with BR2_PACKAGE_PYTHON_37 instead of BR2_PACKAGE_PYTHON? If so try to move .../br-exteranl/package/python to .../br-exteranl/package/python-37 Regards, Peter > this config is without livdevdev and it compile right. but if I select it I > had th error I gave (do you think it could be a problem if I not set > libdevdev, I realy not sure I need it, sorry I didn't completly setupp this > buildroot jus modify some aspect and I am far to master all). > > But its is strange that I have BR2_PACKAGE_PYTHON not set. > I will look later (I am not on my linux computer), I think I even havent > pithon item in menu-config... > Is this mean I have a problem with python dependencies ? I will check the > dependencies logic. > > Peter, Its very strange that at your side you could compile with libdevdev > set and not me. Do you have an idea wher I could search? > > Many thanks for helping. > > Regards. > > Emmanuel > > > > Le dim. 24 janv. 2021 ? 16:14, Peter Seiderer <ps.report@gmx.net> a ?crit : > > > Hello, > > > > On Sun, 24 Jan 2021 12:40:31 +0100, manu f <e.fiancette@gmail.com> wrote: > > > > > here my complete .config > > > > Importing your .config into a plain buildroot-2020.02.8 gives > > the following diff: > > > > @@ -1,9 +1,8 @@ > > # > > # Automatically generated file; DO NOT EDIT. > > -# Buildroot 2020.02.8-dirty Configuration > > +# Buildroot 2020.02.8 Configuration > > # > > BR2_HAVE_DOT_CONFIG=y > > -BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external" > > BR2_HOST_GCC_AT_LEAST_4_9=y > > BR2_HOST_GCC_AT_LEAST_5=y > > BR2_HOST_GCC_AT_LEAST_6=y > > @@ -1446,6 +1445,7 @@ > > # > > # BR2_PACKAGE_PERL is not set > > # BR2_PACKAGE_PHP is not set > > +# BR2_PACKAGE_PYTHON is not set > > BR2_PACKAGE_PYTHON3=y > > # BR2_PACKAGE_PYTHON3_PY_ONLY is not set > > BR2_PACKAGE_PYTHON3_PYC_ONLY=y > > @@ -4174,6 +4174,7 @@ > > # BR2_PACKAGE_HOST_PKGCONF is not set > > # BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT is not set > > # BR2_PACKAGE_HOST_PWGEN is not set > > +# BR2_PACKAGE_HOST_PYTHON is not set > > # BR2_PACKAGE_HOST_PYTHON_CYTHON is not set > > # BR2_PACKAGE_HOST_PYTHON_LXML is not set > > # BR2_PACKAGE_HOST_PYTHON_SIX is not set > > @@ -4876,17 +4877,3 @@ > > # BR2_VFP_FLOAT is not set > > # BR2_PACKAGE_GCC_TARGET is not set > > # BR2_HAVE_DEVFILES is not set > > - > > -# > > -# External options > > -# > > - > > -# > > -# br2-external tree for atos projects (in > > /home/user/cleta_buildroot/br-external) > > -# > > -BR2_PACKAGE_BACKLIGHT_MONITORING=y > > -BR2_PACKAGE_TEST_UART=y > > -BR2_PACKAGE_APP_MOUNT=y > > -BR2_PACKAGE_APP_UPDATER=y > > -BR2_NODE_JS_14x=y > > -# BR2_PYTHON_37 is not set > > > > > > Note the lines with 'Buildroot 2020.02.8-dirty', > > '-BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external"', > > '+# BR2_PACKAGE_PYTHON is not set' and '-# BR2_PYTHON_37 is not set', > > so most likely something with your local change and/or br-external > > changing the package python to python37? > > > > Otherwise the config compiles fine here (even with libevdev enabled)... > > > > Regards, > > Peter > > > > > > > > > > Le sam. 23 janv. 2021 ? 11:48, Thomas Petazzoni < > > > thomas.petazzoni at bootlin.com> a ?crit : > > > > > > > On Fri, 22 Jan 2021 23:53:30 +0100 > > > > manu f <e.fiancette@gmail.com> wrote: > > > > > > > > > ok, I remove libevdev in Target package =>libraries=>Other and its > > copile > > > > > without error! > > > > > > > > > > (But I dont know if I realy need this lib... ) > > > > > > > > > > Well why it no compile with libdevdev ? > > > > > @ Thomas Petazzoni I saw you already got problem and make patch for > > > > > host-python interpreter...is there something to see with ? > > > > > > > > host-python is definitely part of Buildroot 2020.02, so I'm not sure > > > > how you can get this error. We would need more details, such as the > > > > complete .config that reproduces the issue. > > > > > > > > Thomas > > > > -- > > > > Thomas Petazzoni, CTO, Bootlin > > > > Embedded Linux and Kernel engineering > > > > https://bootlin.com > > > > > > > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-24 16:39 ` Peter Seiderer @ 2021-01-24 21:27 ` manu f 2021-01-24 21:53 ` Peter Seiderer 0 siblings, 1 reply; 14+ messages in thread From: manu f @ 2021-01-24 21:27 UTC (permalink / raw) To: buildroot You are right Peter! You will find my python pakage joined. Like I told you I am noob in kernel compil, so sure I made bad thing, but I am here to learn. So if I well understood even if I didnt select the package in menu config, config.in and .mk file interferes with the build.. I use some other config.in and .mk file as model to build these file for my package, so I make a mistake, if you could look them ? Regards (I remove the tar file in files directory cause it is to heavy to send, but it's just python37 archive) Le dim. 24 janv. 2021 ? 17:39, Peter Seiderer <ps.report@gmx.net> a ?crit : > Hello Emmanuel, > > On Sun, 24 Jan 2021 17:08:21 +0100, manu f <e.fiancette@gmail.com> wrote: > > > Thanks peter. > > What's mean Buildroot 2020.02.8-dirty? > > This indicates normally a buildroot git repository at version > 2020.02.8 (tag/branch) with local changes ('dirty')... > > > > > About python37, yes I add this custom package but like you see I didn't > > select it. > > But the line '+# BR2_PACKAGE_PYTHON is not set' indicates that > there is no python package any longer with your build setup > (and so no host-python available needed by libevdev)... > > Hard to judge without knowledge of your br-external but I would suspect > it contains a package/python directory with a python.mk file without > an '$(eval $(host-autotools-package))' line (or something like > that) and a Config.in file with BR2_PACKAGE_PYTHON_37 instead of > BR2_PACKAGE_PYTHON? > > If so try to move .../br-exteranl/package/python to > .../br-exteranl/package/python-37 > > Regards, > Peter > > > this config is without livdevdev and it compile right. but if I select > it I > > had th error I gave (do you think it could be a problem if I not set > > libdevdev, I realy not sure I need it, sorry I didn't completly setupp > this > > buildroot jus modify some aspect and I am far to master all). > > > > But its is strange that I have BR2_PACKAGE_PYTHON not set. > > I will look later (I am not on my linux computer), I think I even havent > > pithon item in menu-config... > > Is this mean I have a problem with python dependencies ? I will check the > > dependencies logic. > > > > Peter, Its very strange that at your side you could compile with > libdevdev > > set and not me. Do you have an idea wher I could search? > > > > Many thanks for helping. > > > > Regards. > > > > Emmanuel > > > > > > > > Le dim. 24 janv. 2021 ? 16:14, Peter Seiderer <ps.report@gmx.net> a > ?crit : > > > > > Hello, > > > > > > On Sun, 24 Jan 2021 12:40:31 +0100, manu f <e.fiancette@gmail.com> > wrote: > > > > > > > here my complete .config > > > > > > Importing your .config into a plain buildroot-2020.02.8 gives > > > the following diff: > > > > > > @@ -1,9 +1,8 @@ > > > # > > > # Automatically generated file; DO NOT EDIT. > > > -# Buildroot 2020.02.8-dirty Configuration > > > +# Buildroot 2020.02.8 Configuration > > > # > > > BR2_HAVE_DOT_CONFIG=y > > > -BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external" > > > BR2_HOST_GCC_AT_LEAST_4_9=y > > > BR2_HOST_GCC_AT_LEAST_5=y > > > BR2_HOST_GCC_AT_LEAST_6=y > > > @@ -1446,6 +1445,7 @@ > > > # > > > # BR2_PACKAGE_PERL is not set > > > # BR2_PACKAGE_PHP is not set > > > +# BR2_PACKAGE_PYTHON is not set > > > BR2_PACKAGE_PYTHON3=y > > > # BR2_PACKAGE_PYTHON3_PY_ONLY is not set > > > BR2_PACKAGE_PYTHON3_PYC_ONLY=y > > > @@ -4174,6 +4174,7 @@ > > > # BR2_PACKAGE_HOST_PKGCONF is not set > > > # BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT is not set > > > # BR2_PACKAGE_HOST_PWGEN is not set > > > +# BR2_PACKAGE_HOST_PYTHON is not set > > > # BR2_PACKAGE_HOST_PYTHON_CYTHON is not set > > > # BR2_PACKAGE_HOST_PYTHON_LXML is not set > > > # BR2_PACKAGE_HOST_PYTHON_SIX is not set > > > @@ -4876,17 +4877,3 @@ > > > # BR2_VFP_FLOAT is not set > > > # BR2_PACKAGE_GCC_TARGET is not set > > > # BR2_HAVE_DEVFILES is not set > > > - > > > -# > > > -# External options > > > -# > > > - > > > -# > > > -# br2-external tree for atos projects (in > > > /home/user/cleta_buildroot/br-external) > > > -# > > > -BR2_PACKAGE_BACKLIGHT_MONITORING=y > > > -BR2_PACKAGE_TEST_UART=y > > > -BR2_PACKAGE_APP_MOUNT=y > > > -BR2_PACKAGE_APP_UPDATER=y > > > -BR2_NODE_JS_14x=y > > > -# BR2_PYTHON_37 is not set > > > > > > > > > Note the lines with 'Buildroot 2020.02.8-dirty', > > > '-BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external"', > > > '+# BR2_PACKAGE_PYTHON is not set' and '-# BR2_PYTHON_37 is not set', > > > so most likely something with your local change and/or br-external > > > changing the package python to python37? > > > > > > Otherwise the config compiles fine here (even with libevdev enabled)... > > > > > > Regards, > > > Peter > > > > > > > > > > > > > > Le sam. 23 janv. 2021 ? 11:48, Thomas Petazzoni < > > > > thomas.petazzoni at bootlin.com> a ?crit : > > > > > > > > > On Fri, 22 Jan 2021 23:53:30 +0100 > > > > > manu f <e.fiancette@gmail.com> wrote: > > > > > > > > > > > ok, I remove libevdev in Target package =>libraries=>Other and > its > > > copile > > > > > > without error! > > > > > > > > > > > > (But I dont know if I realy need this lib... ) > > > > > > > > > > > > Well why it no compile with libdevdev ? > > > > > > @ Thomas Petazzoni I saw you already got problem and make patch > for > > > > > > host-python interpreter...is there something to see with ? > > > > > > > > > > host-python is definitely part of Buildroot 2020.02, so I'm not > sure > > > > > how you can get this error. We would need more details, such as the > > > > > complete .config that reproduces the issue. > > > > > > > > > > Thomas > > > > > -- > > > > > Thomas Petazzoni, CTO, Bootlin > > > > > Embedded Linux and Kernel engineering > > > > > https://bootlin.com > > > > > > > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210124/7566f12c/attachment-0001.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: python37.tar.xz Type: application/x-xz Size: 512 bytes Desc: not available URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210124/7566f12c/attachment-0001.xz> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-24 21:27 ` manu f @ 2021-01-24 21:53 ` Peter Seiderer 2021-01-25 9:55 ` manu f 0 siblings, 1 reply; 14+ messages in thread From: Peter Seiderer @ 2021-01-24 21:53 UTC (permalink / raw) To: buildroot Hello Emmanuel, On Sun, 24 Jan 2021 22:27:06 +0100, manu f <e.fiancette@gmail.com> wrote: > You are right Peter! > You will find my python pakage joined. > Like I told you I am noob in kernel compil, so sure I made bad thing, but I > am here to learn. > > So if I well understood even if I didnt select the package in menu config, > config.in and .mk file interferes with the build.. > I use some other config.in and .mk file as model to build these file for my > package, so I make a mistake, if you could look them ? Besides the point I did not understand why you try to install some python37 binaries (or source?)....all vars in python37/python37.mk should be named PYTHON37_... (instead of PYTHON_...) and the one in python37/Config.in should be named BR2_PYTHON37... Why not just enable the buildroot python3 package (will be python-3.8.6 when using buildroot-2020.02.8)? Regards, Peter > > Regards > > (I remove the tar file in files directory cause it is to heavy to send, but > it's just python37 archive) > > Le dim. 24 janv. 2021 ? 17:39, Peter Seiderer <ps.report@gmx.net> a ?crit : > > > Hello Emmanuel, > > > > On Sun, 24 Jan 2021 17:08:21 +0100, manu f <e.fiancette@gmail.com> wrote: > > > > > Thanks peter. > > > What's mean Buildroot 2020.02.8-dirty? > > > > This indicates normally a buildroot git repository at version > > 2020.02.8 (tag/branch) with local changes ('dirty')... > > > > > > > > About python37, yes I add this custom package but like you see I didn't > > > select it. > > > > But the line '+# BR2_PACKAGE_PYTHON is not set' indicates that > > there is no python package any longer with your build setup > > (and so no host-python available needed by libevdev)... > > > > Hard to judge without knowledge of your br-external but I would suspect > > it contains a package/python directory with a python.mk file without > > an '$(eval $(host-autotools-package))' line (or something like > > that) and a Config.in file with BR2_PACKAGE_PYTHON_37 instead of > > BR2_PACKAGE_PYTHON? > > > > If so try to move .../br-exteranl/package/python to > > .../br-exteranl/package/python-37 > > > > Regards, > > Peter > > > > > this config is without livdevdev and it compile right. but if I select > > it I > > > had th error I gave (do you think it could be a problem if I not set > > > libdevdev, I realy not sure I need it, sorry I didn't completly setupp > > this > > > buildroot jus modify some aspect and I am far to master all). > > > > > > But its is strange that I have BR2_PACKAGE_PYTHON not set. > > > I will look later (I am not on my linux computer), I think I even havent > > > pithon item in menu-config... > > > Is this mean I have a problem with python dependencies ? I will check the > > > dependencies logic. > > > > > > Peter, Its very strange that at your side you could compile with > > libdevdev > > > set and not me. Do you have an idea wher I could search? > > > > > > Many thanks for helping. > > > > > > Regards. > > > > > > Emmanuel > > > > > > > > > > > > Le dim. 24 janv. 2021 ? 16:14, Peter Seiderer <ps.report@gmx.net> a > > ?crit : > > > > > > > Hello, > > > > > > > > On Sun, 24 Jan 2021 12:40:31 +0100, manu f <e.fiancette@gmail.com> > > wrote: > > > > > > > > > here my complete .config > > > > > > > > Importing your .config into a plain buildroot-2020.02.8 gives > > > > the following diff: > > > > > > > > @@ -1,9 +1,8 @@ > > > > # > > > > # Automatically generated file; DO NOT EDIT. > > > > -# Buildroot 2020.02.8-dirty Configuration > > > > +# Buildroot 2020.02.8 Configuration > > > > # > > > > BR2_HAVE_DOT_CONFIG=y > > > > -BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external" > > > > BR2_HOST_GCC_AT_LEAST_4_9=y > > > > BR2_HOST_GCC_AT_LEAST_5=y > > > > BR2_HOST_GCC_AT_LEAST_6=y > > > > @@ -1446,6 +1445,7 @@ > > > > # > > > > # BR2_PACKAGE_PERL is not set > > > > # BR2_PACKAGE_PHP is not set > > > > +# BR2_PACKAGE_PYTHON is not set > > > > BR2_PACKAGE_PYTHON3=y > > > > # BR2_PACKAGE_PYTHON3_PY_ONLY is not set > > > > BR2_PACKAGE_PYTHON3_PYC_ONLY=y > > > > @@ -4174,6 +4174,7 @@ > > > > # BR2_PACKAGE_HOST_PKGCONF is not set > > > > # BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT is not set > > > > # BR2_PACKAGE_HOST_PWGEN is not set > > > > +# BR2_PACKAGE_HOST_PYTHON is not set > > > > # BR2_PACKAGE_HOST_PYTHON_CYTHON is not set > > > > # BR2_PACKAGE_HOST_PYTHON_LXML is not set > > > > # BR2_PACKAGE_HOST_PYTHON_SIX is not set > > > > @@ -4876,17 +4877,3 @@ > > > > # BR2_VFP_FLOAT is not set > > > > # BR2_PACKAGE_GCC_TARGET is not set > > > > # BR2_HAVE_DEVFILES is not set > > > > - > > > > -# > > > > -# External options > > > > -# > > > > - > > > > -# > > > > -# br2-external tree for atos projects (in > > > > /home/user/cleta_buildroot/br-external) > > > > -# > > > > -BR2_PACKAGE_BACKLIGHT_MONITORING=y > > > > -BR2_PACKAGE_TEST_UART=y > > > > -BR2_PACKAGE_APP_MOUNT=y > > > > -BR2_PACKAGE_APP_UPDATER=y > > > > -BR2_NODE_JS_14x=y > > > > -# BR2_PYTHON_37 is not set > > > > > > > > > > > > Note the lines with 'Buildroot 2020.02.8-dirty', > > > > '-BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external"', > > > > '+# BR2_PACKAGE_PYTHON is not set' and '-# BR2_PYTHON_37 is not set', > > > > so most likely something with your local change and/or br-external > > > > changing the package python to python37? > > > > > > > > Otherwise the config compiles fine here (even with libevdev enabled)... > > > > > > > > Regards, > > > > Peter > > > > > > > > > > > > > > > > > > Le sam. 23 janv. 2021 ? 11:48, Thomas Petazzoni < > > > > > thomas.petazzoni at bootlin.com> a ?crit : > > > > > > > > > > > On Fri, 22 Jan 2021 23:53:30 +0100 > > > > > > manu f <e.fiancette@gmail.com> wrote: > > > > > > > > > > > > > ok, I remove libevdev in Target package =>libraries=>Other and > > its > > > > copile > > > > > > > without error! > > > > > > > > > > > > > > (But I dont know if I realy need this lib... ) > > > > > > > > > > > > > > Well why it no compile with libdevdev ? > > > > > > > @ Thomas Petazzoni I saw you already got problem and make patch > > for > > > > > > > host-python interpreter...is there something to see with ? > > > > > > > > > > > > host-python is definitely part of Buildroot 2020.02, so I'm not > > sure > > > > > > how you can get this error. We would need more details, such as the > > > > > > complete .config that reproduces the issue. > > > > > > > > > > > > Thomas > > > > > > -- > > > > > > Thomas Petazzoni, CTO, Bootlin > > > > > > Embedded Linux and Kernel engineering > > > > > > https://bootlin.com > > > > > > > > > > > > > > > > > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-24 21:53 ` Peter Seiderer @ 2021-01-25 9:55 ` manu f 2021-01-25 12:40 ` manu f 0 siblings, 1 reply; 14+ messages in thread From: manu f @ 2021-01-25 9:55 UTC (permalink / raw) To: buildroot I will use the buildroot python package Peter. In fact the app that I must deploy on the Kernel use the version 3.7, I know it must work also with the version 3.8 but it was for me an exercise to learn how to add a package! (not good result but I learn a lot with your help) Now I understand better how the .mk I made work with the build process. Again thanks a lot for your help. Le dim. 24 janv. 2021 ? 22:53, Peter Seiderer <ps.report@gmx.net> a ?crit : > Hello Emmanuel, > > On Sun, 24 Jan 2021 22:27:06 +0100, manu f <e.fiancette@gmail.com> wrote: > > > You are right Peter! > > You will find my python pakage joined. > > Like I told you I am noob in kernel compil, so sure I made bad thing, > but I > > am here to learn. > > > > So if I well understood even if I didnt select the package in menu > config, > > config.in and .mk file interferes with the build.. > > I use some other config.in and .mk file as model to build these file > for my > > package, so I make a mistake, if you could look them ? > > Besides the point I did not understand why you try to install some python37 > binaries (or source?)....all vars in python37/python37.mk should be > named PYTHON37_... (instead of PYTHON_...) and the one in > python37/Config.in > should be named BR2_PYTHON37... > > Why not just enable the buildroot python3 package (will be python-3.8.6 > when using buildroot-2020.02.8)? > > Regards, > Peter > > > > > Regards > > > > (I remove the tar file in files directory cause it is to heavy to send, > but > > it's just python37 archive) > > > > Le dim. 24 janv. 2021 ? 17:39, Peter Seiderer <ps.report@gmx.net> a > ?crit : > > > > > Hello Emmanuel, > > > > > > On Sun, 24 Jan 2021 17:08:21 +0100, manu f <e.fiancette@gmail.com> > wrote: > > > > > > > Thanks peter. > > > > What's mean Buildroot 2020.02.8-dirty? > > > > > > This indicates normally a buildroot git repository at version > > > 2020.02.8 (tag/branch) with local changes ('dirty')... > > > > > > > > > > > About python37, yes I add this custom package but like you see I > didn't > > > > select it. > > > > > > But the line '+# BR2_PACKAGE_PYTHON is not set' indicates that > > > there is no python package any longer with your build setup > > > (and so no host-python available needed by libevdev)... > > > > > > Hard to judge without knowledge of your br-external but I would suspect > > > it contains a package/python directory with a python.mk file without > > > an '$(eval $(host-autotools-package))' line (or something like > > > that) and a Config.in file with BR2_PACKAGE_PYTHON_37 instead of > > > BR2_PACKAGE_PYTHON? > > > > > > If so try to move .../br-exteranl/package/python to > > > .../br-exteranl/package/python-37 > > > > > > Regards, > > > Peter > > > > > > > this config is without livdevdev and it compile right. but if I > select > > > it I > > > > had th error I gave (do you think it could be a problem if I not set > > > > libdevdev, I realy not sure I need it, sorry I didn't completly > setupp > > > this > > > > buildroot jus modify some aspect and I am far to master all). > > > > > > > > But its is strange that I have BR2_PACKAGE_PYTHON not set. > > > > I will look later (I am not on my linux computer), I think I even > havent > > > > pithon item in menu-config... > > > > Is this mean I have a problem with python dependencies ? I will > check the > > > > dependencies logic. > > > > > > > > Peter, Its very strange that at your side you could compile with > > > libdevdev > > > > set and not me. Do you have an idea wher I could search? > > > > > > > > Many thanks for helping. > > > > > > > > Regards. > > > > > > > > Emmanuel > > > > > > > > > > > > > > > > Le dim. 24 janv. 2021 ? 16:14, Peter Seiderer <ps.report@gmx.net> > a > > > ?crit : > > > > > > > > > Hello, > > > > > > > > > > On Sun, 24 Jan 2021 12:40:31 +0100, manu f <e.fiancette@gmail.com> > > > > wrote: > > > > > > > > > > > here my complete .config > > > > > > > > > > Importing your .config into a plain buildroot-2020.02.8 gives > > > > > the following diff: > > > > > > > > > > @@ -1,9 +1,8 @@ > > > > > # > > > > > # Automatically generated file; DO NOT EDIT. > > > > > -# Buildroot 2020.02.8-dirty Configuration > > > > > +# Buildroot 2020.02.8 Configuration > > > > > # > > > > > BR2_HAVE_DOT_CONFIG=y > > > > > -BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external" > > > > > BR2_HOST_GCC_AT_LEAST_4_9=y > > > > > BR2_HOST_GCC_AT_LEAST_5=y > > > > > BR2_HOST_GCC_AT_LEAST_6=y > > > > > @@ -1446,6 +1445,7 @@ > > > > > # > > > > > # BR2_PACKAGE_PERL is not set > > > > > # BR2_PACKAGE_PHP is not set > > > > > +# BR2_PACKAGE_PYTHON is not set > > > > > BR2_PACKAGE_PYTHON3=y > > > > > # BR2_PACKAGE_PYTHON3_PY_ONLY is not set > > > > > BR2_PACKAGE_PYTHON3_PYC_ONLY=y > > > > > @@ -4174,6 +4174,7 @@ > > > > > # BR2_PACKAGE_HOST_PKGCONF is not set > > > > > # BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT is not set > > > > > # BR2_PACKAGE_HOST_PWGEN is not set > > > > > +# BR2_PACKAGE_HOST_PYTHON is not set > > > > > # BR2_PACKAGE_HOST_PYTHON_CYTHON is not set > > > > > # BR2_PACKAGE_HOST_PYTHON_LXML is not set > > > > > # BR2_PACKAGE_HOST_PYTHON_SIX is not set > > > > > @@ -4876,17 +4877,3 @@ > > > > > # BR2_VFP_FLOAT is not set > > > > > # BR2_PACKAGE_GCC_TARGET is not set > > > > > # BR2_HAVE_DEVFILES is not set > > > > > - > > > > > -# > > > > > -# External options > > > > > -# > > > > > - > > > > > -# > > > > > -# br2-external tree for atos projects (in > > > > > /home/user/cleta_buildroot/br-external) > > > > > -# > > > > > -BR2_PACKAGE_BACKLIGHT_MONITORING=y > > > > > -BR2_PACKAGE_TEST_UART=y > > > > > -BR2_PACKAGE_APP_MOUNT=y > > > > > -BR2_PACKAGE_APP_UPDATER=y > > > > > -BR2_NODE_JS_14x=y > > > > > -# BR2_PYTHON_37 is not set > > > > > > > > > > > > > > > Note the lines with 'Buildroot 2020.02.8-dirty', > > > > > '-BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external"', > > > > > '+# BR2_PACKAGE_PYTHON is not set' and '-# BR2_PYTHON_37 is not > set', > > > > > so most likely something with your local change and/or br-external > > > > > changing the package python to python37? > > > > > > > > > > Otherwise the config compiles fine here (even with libevdev > enabled)... > > > > > > > > > > Regards, > > > > > Peter > > > > > > > > > > > > > > > > > > > > > > Le sam. 23 janv. 2021 ? 11:48, Thomas Petazzoni < > > > > > > thomas.petazzoni at bootlin.com> a ?crit : > > > > > > > > > > > > > On Fri, 22 Jan 2021 23:53:30 +0100 > > > > > > > manu f <e.fiancette@gmail.com> wrote: > > > > > > > > > > > > > > > ok, I remove libevdev in Target package =>libraries=>Other > and > > > its > > > > > copile > > > > > > > > without error! > > > > > > > > > > > > > > > > (But I dont know if I realy need this lib... ) > > > > > > > > > > > > > > > > Well why it no compile with libdevdev ? > > > > > > > > @ Thomas Petazzoni I saw you already got problem and make > patch > > > for > > > > > > > > host-python interpreter...is there something to see with ? > > > > > > > > > > > > > > host-python is definitely part of Buildroot 2020.02, so I'm > not > > > sure > > > > > > > how you can get this error. We would need more details, such > as the > > > > > > > complete .config that reproduces the issue. > > > > > > > > > > > > > > Thomas > > > > > > > -- > > > > > > > Thomas Petazzoni, CTO, Bootlin > > > > > > > Embedded Linux and Kernel engineering > > > > > > > https://bootlin.com > > > > > > > > > > > > > > > > > > > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210125/9f072f49/attachment.html> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-25 9:55 ` manu f @ 2021-01-25 12:40 ` manu f 2021-01-25 14:05 ` Thomas Petazzoni 0 siblings, 1 reply; 14+ messages in thread From: manu f @ 2021-01-25 12:40 UTC (permalink / raw) To: buildroot Hello, it's again me! Well, I remove my python37 package, delete my output directory, select python3 package from buildroot and host python3 in host utilities from buildroot and ... user at LinuxDev:~/cleta_buildroot$ make BR2_EXTERNAL=$PWD/br-external -C buildroot/ O=$PWD/output make: Entering directory '/home/user/cleta_buildroot/buildroot' /usr/bin/make -j1 O=/home/user/cleta_buildroot/output HOSTCC="/usr/bin/gcc" HOSTCXX="/usr/bin/g++" syncconfig GEN /home/user/cleta_buildroot/output/Makefile make[1]: *** No rule to make target 'host-python', needed by '/home/user/cleta_buildroot/output/build/libevdev-1.8.0/.stamp_configured'. Stop. make: *** [Makefile:84: _all] Error 2 make: Leaving directory '/home/user/cleta_buildroot/buildroot' user at LinuxDev:~/cleta_buildroot$ Always same problem !! So what's wrong ? Help needed thx Le lun. 25 janv. 2021 ? 10:55, manu f <e.fiancette@gmail.com> a ?crit : > I will use the buildroot python package Peter. > In fact the app that I must deploy on the Kernel use the version 3.7, I > know it must work also with the version 3.8 but it was for me an exercise > to learn how to add a package! (not good result but I learn a lot with your > help) > > Now I understand better how the .mk I made work with the build process. > > Again thanks a lot for your help. > > Le dim. 24 janv. 2021 ? 22:53, Peter Seiderer <ps.report@gmx.net> a > ?crit : > >> Hello Emmanuel, >> >> On Sun, 24 Jan 2021 22:27:06 +0100, manu f <e.fiancette@gmail.com> wrote: >> >> > You are right Peter! >> > You will find my python pakage joined. >> > Like I told you I am noob in kernel compil, so sure I made bad thing, >> but I >> > am here to learn. >> > >> > So if I well understood even if I didnt select the package in menu >> config, >> > config.in and .mk file interferes with the build.. >> > I use some other config.in and .mk file as model to build these file >> for my >> > package, so I make a mistake, if you could look them ? >> >> Besides the point I did not understand why you try to install some >> python37 >> binaries (or source?)....all vars in python37/python37.mk should be >> named PYTHON37_... (instead of PYTHON_...) and the one in >> python37/Config.in >> should be named BR2_PYTHON37... >> >> Why not just enable the buildroot python3 package (will be python-3.8.6 >> when using buildroot-2020.02.8)? >> >> Regards, >> Peter >> >> > >> > Regards >> > >> > (I remove the tar file in files directory cause it is to heavy to send, >> but >> > it's just python37 archive) >> > >> > Le dim. 24 janv. 2021 ? 17:39, Peter Seiderer <ps.report@gmx.net> a >> ?crit : >> > >> > > Hello Emmanuel, >> > > >> > > On Sun, 24 Jan 2021 17:08:21 +0100, manu f <e.fiancette@gmail.com> >> wrote: >> > > >> > > > Thanks peter. >> > > > What's mean Buildroot 2020.02.8-dirty? >> > > >> > > This indicates normally a buildroot git repository at version >> > > 2020.02.8 (tag/branch) with local changes ('dirty')... >> > > >> > > > >> > > > About python37, yes I add this custom package but like you see I >> didn't >> > > > select it. >> > > >> > > But the line '+# BR2_PACKAGE_PYTHON is not set' indicates that >> > > there is no python package any longer with your build setup >> > > (and so no host-python available needed by libevdev)... >> > > >> > > Hard to judge without knowledge of your br-external but I would >> suspect >> > > it contains a package/python directory with a python.mk file without >> > > an '$(eval $(host-autotools-package))' line (or something like >> > > that) and a Config.in file with BR2_PACKAGE_PYTHON_37 instead of >> > > BR2_PACKAGE_PYTHON? >> > > >> > > If so try to move .../br-exteranl/package/python to >> > > .../br-exteranl/package/python-37 >> > > >> > > Regards, >> > > Peter >> > > >> > > > this config is without livdevdev and it compile right. but if I >> select >> > > it I >> > > > had th error I gave (do you think it could be a problem if I not set >> > > > libdevdev, I realy not sure I need it, sorry I didn't completly >> setupp >> > > this >> > > > buildroot jus modify some aspect and I am far to master all). >> > > > >> > > > But its is strange that I have BR2_PACKAGE_PYTHON not set. >> > > > I will look later (I am not on my linux computer), I think I even >> havent >> > > > pithon item in menu-config... >> > > > Is this mean I have a problem with python dependencies ? I will >> check the >> > > > dependencies logic. >> > > > >> > > > Peter, Its very strange that at your side you could compile with >> > > libdevdev >> > > > set and not me. Do you have an idea wher I could search? >> > > > >> > > > Many thanks for helping. >> > > > >> > > > Regards. >> > > > >> > > > Emmanuel >> > > > >> > > > >> > > > >> > > > Le dim. 24 janv. 2021 ? 16:14, Peter Seiderer <ps.report@gmx.net> >> a >> > > ?crit : >> > > > >> > > > > Hello, >> > > > > >> > > > > On Sun, 24 Jan 2021 12:40:31 +0100, manu f <e.fiancette@gmail.com> >> >> > > wrote: >> > > > > >> > > > > > here my complete .config >> > > > > >> > > > > Importing your .config into a plain buildroot-2020.02.8 gives >> > > > > the following diff: >> > > > > >> > > > > @@ -1,9 +1,8 @@ >> > > > > # >> > > > > # Automatically generated file; DO NOT EDIT. >> > > > > -# Buildroot 2020.02.8-dirty Configuration >> > > > > +# Buildroot 2020.02.8 Configuration >> > > > > # >> > > > > BR2_HAVE_DOT_CONFIG=y >> > > > > -BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external" >> > > > > BR2_HOST_GCC_AT_LEAST_4_9=y >> > > > > BR2_HOST_GCC_AT_LEAST_5=y >> > > > > BR2_HOST_GCC_AT_LEAST_6=y >> > > > > @@ -1446,6 +1445,7 @@ >> > > > > # >> > > > > # BR2_PACKAGE_PERL is not set >> > > > > # BR2_PACKAGE_PHP is not set >> > > > > +# BR2_PACKAGE_PYTHON is not set >> > > > > BR2_PACKAGE_PYTHON3=y >> > > > > # BR2_PACKAGE_PYTHON3_PY_ONLY is not set >> > > > > BR2_PACKAGE_PYTHON3_PYC_ONLY=y >> > > > > @@ -4174,6 +4174,7 @@ >> > > > > # BR2_PACKAGE_HOST_PKGCONF is not set >> > > > > # BR2_PACKAGE_HOST_PRU_SOFTWARE_SUPPORT is not set >> > > > > # BR2_PACKAGE_HOST_PWGEN is not set >> > > > > +# BR2_PACKAGE_HOST_PYTHON is not set >> > > > > # BR2_PACKAGE_HOST_PYTHON_CYTHON is not set >> > > > > # BR2_PACKAGE_HOST_PYTHON_LXML is not set >> > > > > # BR2_PACKAGE_HOST_PYTHON_SIX is not set >> > > > > @@ -4876,17 +4877,3 @@ >> > > > > # BR2_VFP_FLOAT is not set >> > > > > # BR2_PACKAGE_GCC_TARGET is not set >> > > > > # BR2_HAVE_DEVFILES is not set >> > > > > - >> > > > > -# >> > > > > -# External options >> > > > > -# >> > > > > - >> > > > > -# >> > > > > -# br2-external tree for atos projects (in >> > > > > /home/user/cleta_buildroot/br-external) >> > > > > -# >> > > > > -BR2_PACKAGE_BACKLIGHT_MONITORING=y >> > > > > -BR2_PACKAGE_TEST_UART=y >> > > > > -BR2_PACKAGE_APP_MOUNT=y >> > > > > -BR2_PACKAGE_APP_UPDATER=y >> > > > > -BR2_NODE_JS_14x=y >> > > > > -# BR2_PYTHON_37 is not set >> > > > > >> > > > > >> > > > > Note the lines with 'Buildroot 2020.02.8-dirty', >> > > > > >> '-BR2_EXTERNAL_ATOS_PATH="/home/user/cleta_buildroot/br-external"', >> > > > > '+# BR2_PACKAGE_PYTHON is not set' and '-# BR2_PYTHON_37 is not >> set', >> > > > > so most likely something with your local change and/or br-external >> > > > > changing the package python to python37? >> > > > > >> > > > > Otherwise the config compiles fine here (even with libevdev >> enabled)... >> > > > > >> > > > > Regards, >> > > > > Peter >> > > > > >> > > > > >> > > > > > >> > > > > > Le sam. 23 janv. 2021 ? 11:48, Thomas Petazzoni < >> > > > > > thomas.petazzoni at bootlin.com> a ?crit : >> > > > > > >> > > > > > > On Fri, 22 Jan 2021 23:53:30 +0100 >> > > > > > > manu f <e.fiancette@gmail.com> wrote: >> > > > > > > >> > > > > > > > ok, I remove libevdev in Target package =>libraries=>Other >> and >> > > its >> > > > > copile >> > > > > > > > without error! >> > > > > > > > >> > > > > > > > (But I dont know if I realy need this lib... ) >> > > > > > > > >> > > > > > > > Well why it no compile with libdevdev ? >> > > > > > > > @ Thomas Petazzoni I saw you already got problem and make >> patch >> > > for >> > > > > > > > host-python interpreter...is there something to see with ? >> > > > > > > >> > > > > > > host-python is definitely part of Buildroot 2020.02, so I'm >> not >> > > sure >> > > > > > > how you can get this error. We would need more details, such >> as the >> > > > > > > complete .config that reproduces the issue. >> > > > > > > >> > > > > > > Thomas >> > > > > > > -- >> > > > > > > Thomas Petazzoni, CTO, Bootlin >> > > > > > > Embedded Linux and Kernel engineering >> > > > > > > https://bootlin.com >> > > > > > > >> > > > > >> > > > > >> > > >> > > >> >> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210125/8e661681/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: .config Type: application/octet-stream Size: 132368 bytes Desc: not available URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210125/8e661681/attachment.obj> ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! 2021-01-25 12:40 ` manu f @ 2021-01-25 14:05 ` Thomas Petazzoni 2021-01-29 12:09 ` [Buildroot] No rule to make target 'host-python !! [SOLVED] manu f 0 siblings, 1 reply; 14+ messages in thread From: Thomas Petazzoni @ 2021-01-25 14:05 UTC (permalink / raw) To: buildroot Hello, On Mon, 25 Jan 2021 13:40:13 +0100 manu f <e.fiancette@gmail.com> wrote: > Well, I remove my python37 package, delete my output directory, select > python3 package from buildroot and host python3 in host utilities from > buildroot and ... Please stop using your custom BR2_EXTERNAL for the moment, and use plain Buildroot, and verify there if this works. If it does, then the problem is in your BR2_EXTERNAL tree. We cannot debug problems that are caused by your custom BR2_EXTERNAL, in which you're doing things that are very tricky and/or apparently unnecessary. Thomas -- Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] No rule to make target 'host-python !! [SOLVED] 2021-01-25 14:05 ` Thomas Petazzoni @ 2021-01-29 12:09 ` manu f 0 siblings, 0 replies; 14+ messages in thread From: manu f @ 2021-01-29 12:09 UTC (permalink / raw) To: buildroot Hello, Nothing very tricky in my BR2_EXTERNAL, unnecessary certainly ! I am in learning curve so I think unnecessary things is inherent and necessary :-) But, well, I clone again from scratch my buildroot directory and no more error ! it is the mystery of computing. ;-) Thanks for your help, i learn a lot. Regards Le lun. 25 janv. 2021 ? 15:05, Thomas Petazzoni < thomas.petazzoni@bootlin.com> a ?crit : > Hello, > > On Mon, 25 Jan 2021 13:40:13 +0100 > manu f <e.fiancette@gmail.com> wrote: > > > Well, I remove my python37 package, delete my output directory, select > > python3 package from buildroot and host python3 in host utilities from > > buildroot and ... > > Please stop using your custom BR2_EXTERNAL for the moment, and use plain > Buildroot, and verify there if this works. > > If it does, then the problem is in your BR2_EXTERNAL tree. We cannot > debug problems that are caused by your custom BR2_EXTERNAL, in which > you're doing things that are very tricky and/or apparently unnecessary. > > Thomas > -- > Thomas Petazzoni, CTO, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20210129/7857ee11/attachment.html> ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2021-01-29 12:09 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-01-22 22:21 [Buildroot] No rule to make target 'host-python !! manu f 2021-01-22 22:32 ` manu f 2021-01-22 22:53 ` manu f 2021-01-23 10:48 ` Thomas Petazzoni 2021-01-24 11:40 ` manu f 2021-01-24 15:14 ` Peter Seiderer 2021-01-24 16:08 ` manu f 2021-01-24 16:39 ` Peter Seiderer 2021-01-24 21:27 ` manu f 2021-01-24 21:53 ` Peter Seiderer 2021-01-25 9:55 ` manu f 2021-01-25 12:40 ` manu f 2021-01-25 14:05 ` Thomas Petazzoni 2021-01-29 12:09 ` [Buildroot] No rule to make target 'host-python !! [SOLVED] manu f
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox