From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 7/8] package/opkg-utils: add opkg-utils as target pkg
Date: Sun, 14 Mar 2021 19:38:35 +0100 [thread overview]
Message-ID: <20210314183835.GM2737665@scaer> (raw)
In-Reply-To: <20210312200534.923-8-ryan.barnett@rockwellcollins.com>
Ryan, All,
On 2021-03-12 14:05 -0600, Ryan Barnett spake thusly:
> Supports a use case of building container rootfs images where a matching
> target version of the tools is required for repackaging of a installer
> archive.
>
> Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Applied to master, with the following changes:
- only select full-blown packages if busybox is not enabled
- select BR2_PACKAGE_BUSYBOX_SHOW_OTHERS, instead of 'depends on'
- allow on nios2 when busybox is enabled
- add binutils binaries on target (for 'ar')
- drop _DEPENDENCIES: they all are only runtime-dpeendencies
- add comment when python(2) is enabled
Thanks!
Regards,
Yann E. MORIN.
> ---
> package/Config.in | 1 +
> package/opkg-utils/Config.in | 33 ++++++++++++++++++++++++++++++++
> package/opkg-utils/opkg-utils.mk | 20 +++++++++++++++++++
> 3 files changed, 54 insertions(+)
> create mode 100644 package/opkg-utils/Config.in
>
> diff --git a/package/Config.in b/package/Config.in
> index 992e46a319..fb77ba134e 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -2337,6 +2337,7 @@ comment "See the manual: "
> comment "http://buildroot.org/manual.html#faq-no-binary-packages"
> comment "-------------------------------------------------------"
> source "package/opkg/Config.in"
> + source "package/opkg-utils/Config.in"
> source "package/rpm/Config.in"
> endmenu
>
> diff --git a/package/opkg-utils/Config.in b/package/opkg-utils/Config.in
> new file mode 100644
> index 0000000000..b60a48c19d
> --- /dev/null
> +++ b/package/opkg-utils/Config.in
> @@ -0,0 +1,33 @@
> +config BR2_PACKAGE_OPKG_UTILS
> + bool "opkg-utils"
> + depends on BR2_USE_MMU # bash, coreutils, findutils, tar
> + depends on !BR2_nios2 # binutils
> + # binutils, coreutils, diffutils, findutils, grep, gzip, python3, sed,
> + # tar
> + depends on BR2_USE_WCHAR
> + depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
> + depends on BR2_TOOLCHAIN_HAS_THREADS # libffi
> + depends on !BR2_STATIC_LIBS # python3
> + depends on !BR2_PACKAGE_PYTHON # python3
> + select BR2_PACKAGE_BASH
> + select BR2_PACKAGE_BINUTILS
> + select BR2_PACKAGE_BZIP2
> + select BR2_PACKAGE_COREUTILS
> + select BR2_PACKAGE_DIFFUTILS
> + select BR2_PACKAGE_FINDUTILS
> + select BR2_PACKAGE_GREP
> + select BR2_PACKAGE_GZIP
> + select BR2_PACKAGE_LZ4
> + select BR2_PACKAGE_PYTHON3
> + select BR2_PACKAGE_SED
> + select BR2_PACKAGE_TAR
> + select BR2_PACKAGE_XZ
> + help
> + Helper scripts for use with the opkg package manager.
> +
> + https://git.yoctoproject.org/cgit/cgit.cgi/opkg-utils/
> +
> +comment "opkg-utils needs a toolchain w/ wchar, threads, dynamic library"
> + depends on BR2_USE_MMU
> + depends on !BR2_nios2
> + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS
> diff --git a/package/opkg-utils/opkg-utils.mk b/package/opkg-utils/opkg-utils.mk
> index d7f68b8555..a445c9f49e 100644
> --- a/package/opkg-utils/opkg-utils.mk
> +++ b/package/opkg-utils/opkg-utils.mk
> @@ -10,6 +10,21 @@ OPKG_UTILS_SITE_METHOD = git
> OPKG_UTILS_LICENSE = GPL-2.0+
> OPKG_UTILS_LICENSE_FILES = COPYING
>
> +OPKG_UTILS_DEPENDENCIES += \
> + bash \
> + binutils \
> + bzip2 \
> + coreutils \
> + diffutils \
> + findutils \
> + grep \
> + gzip \
> + lz4 \
> + python3 \
> + sed \
> + tar \
> + xz
> +
> HOST_OPKG_UTILS_DEPENDENCIES += \
> host-coreutils \
> host-diffutils \
> @@ -19,8 +34,13 @@ HOST_OPKG_UTILS_DEPENDENCIES += \
> $(BR2_PYTHON3_HOST_DEPENDENCY) \
> host-xz
>
> +define OPKG_UTILS_INSTALL_CMDS
> + $(MAKE) -C $(@D) PREFIX=$(TARGET_DIR) install-utils
> +endef
> +
> define HOST_OPKG_UTILS_INSTALL_CMDS
> $(MAKE) -C $(@D) PREFIX=$(HOST_DIR) install-utils
> endef
>
> +$(eval $(generic-package))
> $(eval $(host-generic-package))
> --
> 2.17.1
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2021-03-14 18:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-12 20:05 [Buildroot] [PATCH 0/8] package/opkg-utils: add target build Ryan Barnett
2021-03-12 20:05 ` [Buildroot] [PATCH 1/8] package/opkg-utils: remove build step Ryan Barnett
2021-03-13 8:04 ` Yann E. MORIN
2021-03-20 16:43 ` Peter Korsgaard
2021-03-12 20:05 ` [Buildroot] [PATCH 2/8] package/opkg-utils: install only utility scripts Ryan Barnett
2021-03-20 16:43 ` Peter Korsgaard
2021-03-12 20:05 ` [Buildroot] [PATCH 3/8] package/diffutils: add host package Ryan Barnett
2021-03-20 16:47 ` Peter Korsgaard
2021-03-12 20:05 ` [Buildroot] [PATCH 4/8] package/findutils: " Ryan Barnett
2021-03-12 20:05 ` [Buildroot] [PATCH 5/8] package/grep: " Ryan Barnett
2021-03-12 20:05 ` [Buildroot] [PATCH 6/8] package/opkg-utils: add missing dependencies for host build Ryan Barnett
2021-03-12 22:52 ` Yann E. MORIN
2021-03-15 16:13 ` Ryan Barnett
2021-03-20 16:49 ` Peter Korsgaard
2021-03-12 20:05 ` [Buildroot] [PATCH 7/8] package/opkg-utils: add opkg-utils as target pkg Ryan Barnett
2021-03-12 22:56 ` Yann E. MORIN
2021-03-14 18:38 ` Yann E. MORIN [this message]
2021-03-12 20:05 ` [Buildroot] [PATCH 8/8] DEVELOPERS: Add Ryan Barnett for opkg and opkg-utils Ryan Barnett
2021-03-14 18:39 ` Yann E. MORIN
2021-03-13 7:59 ` [Buildroot] [PATCH 0/8] package/opkg-utils: add target build Yann E. MORIN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210314183835.GM2737665@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox