* [Buildroot] [PATCH] configs/microchip_sama5d2_icp: new defconfigs
@ 2021-04-23 11:45 Eugen Hristev
2021-04-26 20:12 ` Thomas Petazzoni
0 siblings, 1 reply; 2+ messages in thread
From: Eugen Hristev @ 2021-04-23 11:45 UTC (permalink / raw)
To: buildroot
Add the new SAMA5D2 ICP (Industrial Connectivity Board)
with linux4sam_2020.10 components.
Update README file with new defconfigs.
https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
Hi,
This patch requires patch
[PATCH] boot: introduce at91bootstrap4
Eugen
board/atmel/readme.txt | 2 +
board/microchip/sama5d2_icp/genimage.cfg | 31 ++++++++
configs/microchip_sama5d2_icp_mmc_defconfig | 33 +++++++++
.../microchip_sama5d2_icp_mmc_dev_defconfig | 71 +++++++++++++++++++
4 files changed, 137 insertions(+)
create mode 100644 board/microchip/sama5d2_icp/genimage.cfg
create mode 100644 configs/microchip_sama5d2_icp_mmc_defconfig
create mode 100644 configs/microchip_sama5d2_icp_mmc_dev_defconfig
diff --git a/board/atmel/readme.txt b/board/atmel/readme.txt
index 1f21dd15e4..a29d027214 100644
--- a/board/atmel/readme.txt
+++ b/board/atmel/readme.txt
@@ -23,6 +23,8 @@ This guide covers the following configurations:
- microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig
- microchip_sam9x60ek_mmc_defconfig
- microchip_sam9x60ek_mmc_dev_defconfig
+ - microchip_sama5d2_icp_mmc_defconfig
+ - microchip_sama5d2_icp_mmc_dev_defconfig
These configurations will use AT91Bootstrap, u-boot and a linux kernel from
the git trees maintained by Atmel.
diff --git a/board/microchip/sama5d2_icp/genimage.cfg b/board/microchip/sama5d2_icp/genimage.cfg
new file mode 100644
index 0000000000..854751713f
--- /dev/null
+++ b/board/microchip/sama5d2_icp/genimage.cfg
@@ -0,0 +1,31 @@
+# Image for SD card boot on Microchip SAMA5D2 ICP (Industrial Connectivity Platform)
+#
+image boot.vfat {
+ vfat {
+ files = {
+ "zImage",
+ "at91-sama5d2_icp.dtb",
+ "boot.bin",
+ "u-boot.bin"
+ }
+ }
+ size = 16M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ offset = 1M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ size = 512M
+ }
+}
diff --git a/configs/microchip_sama5d2_icp_mmc_defconfig b/configs/microchip_sama5d2_icp_mmc_defconfig
new file mode 100644
index 0000000000..07c07fd1e6
--- /dev/null
+++ b/configs/microchip_sama5d2_icp_mmc_defconfig
@@ -0,0 +1,33 @@
+BR2_arm=y
+BR2_cortex_a5=y
+BR2_ARM_ENABLE_NEON=y
+BR2_ARM_ENABLE_VFP=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
+BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
+BR2_PTHREAD_DEBUG=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/microchip/sama5d2_icp/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam-2020.10)/linux-linux4sam-2020.10.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="sama5"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d2_icp"
+BR2_PACKAGE_LINUX_TOOLS_IIO=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_AT91BOOTSTRAP4=y
+BR2_TARGET_AT91BOOTSTRAP4_DEFCONFIG="sama5d2_icpsd_uboot"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam-2020.10)/u-boot-at91-linux4sam-2020.10.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_icp_mmc"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
diff --git a/configs/microchip_sama5d2_icp_mmc_dev_defconfig b/configs/microchip_sama5d2_icp_mmc_dev_defconfig
new file mode 100644
index 0000000000..24a707db9b
--- /dev/null
+++ b/configs/microchip_sama5d2_icp_mmc_dev_defconfig
@@ -0,0 +1,71 @@
+BR2_arm=y
+BR2_cortex_a5=y
+BR2_ARM_ENABLE_NEON=y
+BR2_ARM_ENABLE_VFP=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
+BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
+BR2_PTHREAD_DEBUG=y
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/microchip/sama5d2_icp/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam-2020.10)/linux-linux4sam-2020.10.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="sama5"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d2_icp"
+BR2_PACKAGE_LINUX_TOOLS_IIO=y
+BR2_PACKAGE_BZIP2=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_ZIP=y
+BR2_PACKAGE_GDB=y
+BR2_PACKAGE_LMBENCH=y
+BR2_PACKAGE_STRACE=y
+BR2_PACKAGE_TREE=y
+BR2_PACKAGE_DOSFSTOOLS=y
+BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y
+BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y
+BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
+BR2_PACKAGE_MMC_UTILS=y
+BR2_PACKAGE_MTD=y
+BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_EVTEST=y
+BR2_PACKAGE_SETSERIAL=y
+BR2_PACKAGE_SPI_TOOLS=y
+BR2_PACKAGE_USBUTILS=y
+BR2_PACKAGE_LIBSYSFS=y
+BR2_PACKAGE_LIBDRM=y
+BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y
+BR2_PACKAGE_DTC=y
+BR2_PACKAGE_DTC_PROGRAMS=y
+BR2_PACKAGE_ARGP_STANDALONE=y
+BR2_PACKAGE_BLUEZ5_UTILS=y
+BR2_PACKAGE_BRIDGE_UTILS=y
+BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_ETHTOOL=y
+BR2_PACKAGE_IPERF=y
+BR2_PACKAGE_IPROUTE2=y
+BR2_PACKAGE_IPTABLES=y
+BR2_PACKAGE_IW=y
+BR2_PACKAGE_LRZSZ=y
+BR2_PACKAGE_MII_DIAG=y
+BR2_PACKAGE_OPENSSH=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_HTOP=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_AT91BOOTSTRAP4=y
+BR2_TARGET_AT91BOOTSTRAP4_DEFCONFIG="sama5d2_icpsd_uboot"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam-2020.10)/u-boot-at91-linux4sam-2020.10.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d2_icp_mmc"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [Buildroot] [PATCH] configs/microchip_sama5d2_icp: new defconfigs
2021-04-23 11:45 [Buildroot] [PATCH] configs/microchip_sama5d2_icp: new defconfigs Eugen Hristev
@ 2021-04-26 20:12 ` Thomas Petazzoni
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Petazzoni @ 2021-04-26 20:12 UTC (permalink / raw)
To: buildroot
Hello Eugen,
On Fri, 23 Apr 2021 14:45:12 +0300
Eugen Hristev via buildroot <buildroot@busybox.net> wrote:
> Add the new SAMA5D2 ICP (Industrial Connectivity Board)
> with linux4sam_2020.10 components.
> Update README file with new defconfigs.
>
> https://www.linux4sam.org/bin/view/Linux4SAM/Sama5d2IcpMainPage
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
This looks mostly good, and in fact I would have probably applied if
there wasn't the issue with at91bootstrap4 package (to which I replied
separately).
> This patch requires patch
> [PATCH] boot: introduce at91bootstrap4
Could you send both patches as a series, then? This is the standard way
to indicate that there is a dependency.
> diff --git a/configs/microchip_sama5d2_icp_mmc_defconfig b/configs/microchip_sama5d2_icp_mmc_defconfig
> new file mode 100644
> index 0000000000..07c07fd1e6
> --- /dev/null
> +++ b/configs/microchip_sama5d2_icp_mmc_defconfig
> @@ -0,0 +1,33 @@
> +BR2_arm=y
> +BR2_cortex_a5=y
> +BR2_ARM_ENABLE_NEON=y
> +BR2_ARM_ENABLE_VFP=y
> +BR2_ARM_INSTRUCTIONS_THUMB2=y
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
> +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
> +BR2_PTHREAD_DEBUG=y
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
Why are these three last options needed, in a minimal defconfig?
> +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
Why is this option needed?
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/microchip/sama5d2_icp/genimage.cfg"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam-2020.10)/linux-linux4sam-2020.10.tar.gz"
> +BR2_LINUX_KERNEL_DEFCONFIG="sama5"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d2_icp"
> +BR2_PACKAGE_LINUX_TOOLS_IIO=y
This option should not be part of a minimal defconfig.
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> +BR2_TARGET_AT91BOOTSTRAP4=y
> +BR2_TARGET_AT91BOOTSTRAP4_DEFCONFIG="sama5d2_icpsd_uboot"
We want to use a fixed version of at91bootstrap, not just "the latest".
This is similar to what you're doing for linux and u-boot. This commit
also applies to the "dev" defconfig.
Could you adjust those minor details, and send an updated version, in
the same series as the reworked at91bootstrap4 packaging?
Thanks a lot!
Thomas
--
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-04-26 20:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-04-23 11:45 [Buildroot] [PATCH] configs/microchip_sama5d2_icp: new defconfigs Eugen Hristev
2021-04-26 20:12 ` Thomas Petazzoni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox