* [Buildroot] [PATCH 1/1] package/pipewire: alsa needs ucm
@ 2021-05-28 20:15 Fabrice Fontaine
2021-05-29 8:29 ` Yann E. MORIN
0 siblings, 1 reply; 2+ messages in thread
From: Fabrice Fontaine @ 2021-05-28 20:15 UTC (permalink / raw)
To: buildroot
alsa unconditionally uses ucm since version 0.3.7 and
https://gitlab.freedesktop.org/pipewire/pipewire/-/commit/1612f5e4d215bd5edf7d649d220b53ff1ed7c098
which will result in the following build failure since commit
a6d88d3ba5e30e11f4d726f341bc56c1be7c71c9:
../spa/plugins/alsa/acp/alsa-ucm.h:26:10: fatal error: alsa/use-case.h: No such file or directory
26 | #include <alsa/use-case.h>
| ^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/ef53534daf84397b4e22392f2a6be2c335819ab5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
---
package/pipewire/pipewire.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/pipewire/pipewire.mk b/package/pipewire/pipewire.mk
index e5185aeb8c..847798e6f8 100644
--- a/package/pipewire/pipewire.mk
+++ b/package/pipewire/pipewire.mk
@@ -52,7 +52,7 @@ endif
ifeq ($(BR2_PACKAGE_ALSA_LIB),y)
PIPEWIRE_CONF_OPTS += -Dpipewire-alsa=enabled
PIPEWIRE_DEPENDENCIES += alsa-lib
-ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
+ifeq ($(BR2_PACKAGE_ALSA_LIB_UCM)$(BR2_PACKAGE_HAS_UDEV),yy)
PIPEWIRE_CONF_OPTS += -Dalsa=enabled
else
PIPEWIRE_CONF_OPTS += -Dalsa=disabled
--
2.30.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [Buildroot] [PATCH 1/1] package/pipewire: alsa needs ucm
2021-05-28 20:15 [Buildroot] [PATCH 1/1] package/pipewire: alsa needs ucm Fabrice Fontaine
@ 2021-05-29 8:29 ` Yann E. MORIN
0 siblings, 0 replies; 2+ messages in thread
From: Yann E. MORIN @ 2021-05-29 8:29 UTC (permalink / raw)
To: buildroot
Fabrice, All,
On 2021-05-28 22:15 +0200, Fabrice Fontaine spake thusly:
> alsa unconditionally uses ucm since version 0.3.7 and
> https://gitlab.freedesktop.org/pipewire/pipewire/-/commit/1612f5e4d215bd5edf7d649d220b53ff1ed7c098
> which will result in the following build failure since commit
> a6d88d3ba5e30e11f4d726f341bc56c1be7c71c9:
>
> ../spa/plugins/alsa/acp/alsa-ucm.h:26:10: fatal error: alsa/use-case.h: No such file or directory
> 26 | #include <alsa/use-case.h>
> | ^~~~~~~~~~~~~~~~~
>
> Fixes:
> - http://autobuild.buildroot.org/results/ef53534daf84397b4e22392f2a6be2c335819ab5
>
> Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Applied to master, thanks.
Regards,
Yann E. MORIN.
> ---
> package/pipewire/pipewire.mk | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/package/pipewire/pipewire.mk b/package/pipewire/pipewire.mk
> index e5185aeb8c..847798e6f8 100644
> --- a/package/pipewire/pipewire.mk
> +++ b/package/pipewire/pipewire.mk
> @@ -52,7 +52,7 @@ endif
> ifeq ($(BR2_PACKAGE_ALSA_LIB),y)
> PIPEWIRE_CONF_OPTS += -Dpipewire-alsa=enabled
> PIPEWIRE_DEPENDENCIES += alsa-lib
> -ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
> +ifeq ($(BR2_PACKAGE_ALSA_LIB_UCM)$(BR2_PACKAGE_HAS_UDEV),yy)
> PIPEWIRE_CONF_OPTS += -Dalsa=enabled
> else
> PIPEWIRE_CONF_OPTS += -Dalsa=disabled
> --
> 2.30.2
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-05-29 8:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-05-28 20:15 [Buildroot] [PATCH 1/1] package/pipewire: alsa needs ucm Fabrice Fontaine
2021-05-29 8:29 ` Yann E. MORIN
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox