* [Buildroot] [PATCH 0/1] Raspberry-Pi Zero 2 W support @ 2021-10-28 6:26 Julien Grossholtz 2021-10-28 6:26 ` [Buildroot] [PATCH 1/1] board/raspberrypi: add Raspberry Pi Zero 2 W Julien Grossholtz 0 siblings, 1 reply; 4+ messages in thread From: Julien Grossholtz @ 2021-10-28 6:26 UTC (permalink / raw) To: buildroot; +Cc: Peter Seiderer, Martin Bark, Julien Grossholtz Hello, The following patch add support for the new Raspberry-Pi Zero 2 W. I have a concern regarding the previous Pi Zero naming in buildroot, the defconfig is named raspberrypi0w_defconfig. The commercial name is Raspberry Pi "Zero", not "0". For the Zero 2 the defconfig name would be raspberrypi02w, but it does not looks good. It is also true for the board/ simlink name,config.txt and genimage configuration file. If you agree, I can send a patch to update the previous generation pi zero(w) files names to something like "raspberrypizero..." . Otherwise I will update this patch with appropriate filenames. Anyway, it is better to have a consistent naming scheme between those boards. Let me know what you think. Have nice day, Julien Grossholtz (1): board/raspberrypi: add Raspberry Pi Zero 2 W board/raspberrypi/config_zero2.txt | 29 ++++++++++++++ .../raspberrypi/genimage-raspberrypizero2.cfg | 31 +++++++++++++++ board/raspberrypi/readme.txt | 5 +++ board/raspberrypizero2 | 1 + configs/raspberrypizero2_defconfig | 38 +++++++++++++++++++ 5 files changed, 104 insertions(+) create mode 100644 board/raspberrypi/config_zero2.txt create mode 100644 board/raspberrypi/genimage-raspberrypizero2.cfg create mode 120000 board/raspberrypizero2 create mode 100644 configs/raspberrypizero2_defconfig -- 2.31.1 _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] [PATCH 1/1] board/raspberrypi: add Raspberry Pi Zero 2 W 2021-10-28 6:26 [Buildroot] [PATCH 0/1] Raspberry-Pi Zero 2 W support Julien Grossholtz @ 2021-10-28 6:26 ` Julien Grossholtz 2021-10-28 21:23 ` Peter Seiderer 0 siblings, 1 reply; 4+ messages in thread From: Julien Grossholtz @ 2021-10-28 6:26 UTC (permalink / raw) To: buildroot; +Cc: Peter Seiderer, Martin Bark, Julien Grossholtz The Raspberry-Pi Zero 2 W is an affordable single board computer. It is a more powerful drop-in replacement for the Raspberry Pi Zero W. The board incorporates an Raspberry-Pi RP3A0 system-in-package (SiP) with a Broadcom BCM2710A1 and 512MB LPDDR2 SDRAM. The CPU is a quad-core 1Ghz 64-bit Arm Cortex-A53. As for other Raspberry-Pis it also provides 2.4GHz 802.11 b/g/n Wifi, Bluetooth 4.2 and BLE. The BCM2710 cpu is similar to the Raspberry-Pi 3 and the form factor is the same as the previous Zero W. Therefore, this board support uses the Pi 3's Linux configuration and the original Zero W device-tree. Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io> --- board/raspberrypi/config_zero2.txt | 29 ++++++++++++++ .../raspberrypi/genimage-raspberrypizero2.cfg | 31 +++++++++++++++ board/raspberrypi/readme.txt | 5 +++ board/raspberrypizero2 | 1 + configs/raspberrypizero2_defconfig | 38 +++++++++++++++++++ 5 files changed, 104 insertions(+) create mode 100644 board/raspberrypi/config_zero2.txt create mode 100644 board/raspberrypi/genimage-raspberrypizero2.cfg create mode 120000 board/raspberrypizero2 create mode 100644 configs/raspberrypizero2_defconfig diff --git a/board/raspberrypi/config_zero2.txt b/board/raspberrypi/config_zero2.txt new file mode 100644 index 0000000000..9e6b7f5ccf --- /dev/null +++ b/board/raspberrypi/config_zero2.txt @@ -0,0 +1,29 @@ +# Please note that this is only a sample, we recommend you to change it to fit +# your needs. +# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE. +# See http://buildroot.org/manual.html#rootfs-custom +# and http://elinux.org/RPiconfig for a description of config.txt syntax + +start_file=start.elf +fixup_file=fixup.dat + +kernel=zImage + +# To use an external initramfs file +#initramfs rootfs.cpio.gz + +# Disable overscan assuming the display supports displaying the full resolution +# If the text shown on the screen disappears off the edge, comment this out +disable_overscan=1 + +# How much memory in MB to assign to the GPU on Pi models having +# 256, 512 or 1024 MB total memory +gpu_mem_256=100 +gpu_mem_512=100 +gpu_mem_1024=100 + +# fixes rpi (3B, 3B+, 3A+, 4B ,zero W and zero 2) ttyAMA0 serial console +dtoverlay=miniuart-bt + +# enable autoprobing of Bluetooth driver without need of hciattach/btattach +dtoverlay=krnbt=on diff --git a/board/raspberrypi/genimage-raspberrypizero2.cfg b/board/raspberrypi/genimage-raspberrypizero2.cfg new file mode 100644 index 0000000000..f76256ef8a --- /dev/null +++ b/board/raspberrypi/genimage-raspberrypizero2.cfg @@ -0,0 +1,31 @@ +image boot.vfat { + vfat { + files = { + "bcm2708-rpi-zero-w.dtb", + "rpi-firmware/bootcode.bin", + "rpi-firmware/cmdline.txt", + "rpi-firmware/config.txt", + "rpi-firmware/fixup.dat", + "rpi-firmware/start.elf", + "rpi-firmware/overlays", + "zImage" + } + } + size = 32M +} + +image sdcard.img { + hdimage { + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt index 98c44d80a1..7d134d17fb 100644 --- a/board/raspberrypi/readme.txt +++ b/board/raspberrypi/readme.txt @@ -28,6 +28,10 @@ For model Zero (model A+ in smaller form factor): $ make raspberrypi0_defconfig +For model Zero 2 (model B3 in smaller form factor): + + $ make raspberrypizero2_defconfig + For model 2 B: $ make raspberrypi2_defconfig @@ -76,6 +80,7 @@ After building, you should obtain this tree: output/images/ +-- bcm2708-rpi-b.dtb [1] +-- bcm2708-rpi-b-plus.dtb [1] + +-- bcm2708-rpi-zero-w.dtb [1] +-- bcm2709-rpi-2-b.dtb [1] +-- bcm2710-rpi-3-b.dtb [1] +-- bcm2710-rpi-3-b-plus.dtb [1] diff --git a/board/raspberrypizero2 b/board/raspberrypizero2 new file mode 120000 index 0000000000..fcdafc81ed --- /dev/null +++ b/board/raspberrypizero2 @@ -0,0 +1 @@ +raspberrypi \ No newline at end of file diff --git a/configs/raspberrypizero2_defconfig b/configs/raspberrypizero2_defconfig new file mode 100644 index 0000000000..81d92ee6b7 --- /dev/null +++ b/configs/raspberrypizero2_defconfig @@ -0,0 +1,38 @@ +BR2_arm=y +BR2_cortex_a53=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Linux headers same as kernel, 5.10 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y + +BR2_TOOLCHAIN_BUILDROOT_CXX=y + +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,24c8b0546a820222a1ebcfe606dfacb0e228c466)/linux-24c8b0546a820222a1ebcfe606dfacb0e228c466.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" + +# The zero2 uses the same processor as the Raspberry Pi 3 with the same +# form-factor as the zero-w +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w" + +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +BR2_PACKAGE_RPI_FIRMWARE=y +BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y +BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y +BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypizero2/config_zero2.txt" + +# MicroSD images generation tools +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y + +# Filesystem / image +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +# BR2_TARGET_ROOTFS_TAR is not set +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2/post-image.sh" -- 2.31.1 _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Buildroot] [PATCH 1/1] board/raspberrypi: add Raspberry Pi Zero 2 W 2021-10-28 6:26 ` [Buildroot] [PATCH 1/1] board/raspberrypi: add Raspberry Pi Zero 2 W Julien Grossholtz @ 2021-10-28 21:23 ` Peter Seiderer 2021-10-29 10:08 ` Julien Grossholtz 0 siblings, 1 reply; 4+ messages in thread From: Peter Seiderer @ 2021-10-28 21:23 UTC (permalink / raw) To: Julien Grossholtz; +Cc: Martin Bark, buildroot Hello Julien, thanks for (the fast) contribution of the new rpi variant, comments below... On Thu, 28 Oct 2021 08:26:17 +0200, Julien Grossholtz <julien.grossholtz@openest.io> wrote: > The Raspberry-Pi Zero 2 W is an affordable single board computer. It is > a more powerful drop-in replacement for the Raspberry Pi Zero W. > > The board incorporates an Raspberry-Pi RP3A0 system-in-package (SiP) with > a Broadcom BCM2710A1 and 512MB LPDDR2 SDRAM. The CPU is a quad-core 1Ghz > 64-bit Arm Cortex-A53. As for other Raspberry-Pis it also provides > 2.4GHz 802.11 b/g/n Wifi, Bluetooth 4.2 and BLE. > > The BCM2710 cpu is similar to the Raspberry-Pi 3 and the form factor is > the same as the previous Zero W. Therefore, this board support uses the > Pi 3's Linux configuration and the original Zero W device-tree. > > Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io> > --- > board/raspberrypi/config_zero2.txt | 29 ++++++++++++++ > .../raspberrypi/genimage-raspberrypizero2.cfg | 31 +++++++++++++++ > board/raspberrypi/readme.txt | 5 +++ > board/raspberrypizero2 | 1 + > configs/raspberrypizero2_defconfig | 38 +++++++++++++++++++ > 5 files changed, 104 insertions(+) > create mode 100644 board/raspberrypi/config_zero2.txt > create mode 100644 board/raspberrypi/genimage-raspberrypizero2.cfg > create mode 120000 board/raspberrypizero2 > create mode 100644 configs/raspberrypizero2_defconfig > > diff --git a/board/raspberrypi/config_zero2.txt b/board/raspberrypi/config_zero2.txt > new file mode 100644 > index 0000000000..9e6b7f5ccf > --- /dev/null > +++ b/board/raspberrypi/config_zero2.txt > @@ -0,0 +1,29 @@ > +# Please note that this is only a sample, we recommend you to change it to fit > +# your needs. > +# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE. > +# See http://buildroot.org/manual.html#rootfs-custom > +# and http://elinux.org/RPiconfig for a description of config.txt syntax > + > +start_file=start.elf > +fixup_file=fixup.dat > + > +kernel=zImage > + > +# To use an external initramfs file > +#initramfs rootfs.cpio.gz > + > +# Disable overscan assuming the display supports displaying the full resolution > +# If the text shown on the screen disappears off the edge, comment this out > +disable_overscan=1 > + > +# How much memory in MB to assign to the GPU on Pi models having > +# 256, 512 or 1024 MB total memory > +gpu_mem_256=100 > +gpu_mem_512=100 > +gpu_mem_1024=100 > + > +# fixes rpi (3B, 3B+, 3A+, 4B ,zero W and zero 2) ttyAMA0 serial console > +dtoverlay=miniuart-bt > + > +# enable autoprobing of Bluetooth driver without need of hciattach/btattach > +dtoverlay=krnbt=on > diff --git a/board/raspberrypi/genimage-raspberrypizero2.cfg b/board/raspberrypi/genimage-raspberrypizero2.cfg > new file mode 100644 > index 0000000000..f76256ef8a > --- /dev/null > +++ b/board/raspberrypi/genimage-raspberrypizero2.cfg > @@ -0,0 +1,31 @@ > +image boot.vfat { > + vfat { > + files = { > + "bcm2708-rpi-zero-w.dtb", > + "rpi-firmware/bootcode.bin", > + "rpi-firmware/cmdline.txt", > + "rpi-firmware/config.txt", > + "rpi-firmware/fixup.dat", > + "rpi-firmware/start.elf", > + "rpi-firmware/overlays", > + "zImage" > + } > + } > + size = 32M > +} > + > +image sdcard.img { > + hdimage { > + } > + > + partition boot { > + partition-type = 0xC > + bootable = "true" > + image = "boot.vfat" > + } > + > + partition rootfs { > + partition-type = 0x83 > + image = "rootfs.ext4" > + } > +} > diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt > index 98c44d80a1..7d134d17fb 100644 > --- a/board/raspberrypi/readme.txt > +++ b/board/raspberrypi/readme.txt > @@ -28,6 +28,10 @@ For model Zero (model A+ in smaller form factor): > > $ make raspberrypi0_defconfig > > +For model Zero 2 (model B3 in smaller form factor): > + > + $ make raspberrypizero2_defconfig > + > For model 2 B: > > $ make raspberrypi2_defconfig > @@ -76,6 +80,7 @@ After building, you should obtain this tree: > output/images/ > +-- bcm2708-rpi-b.dtb [1] > +-- bcm2708-rpi-b-plus.dtb [1] > + +-- bcm2708-rpi-zero-w.dtb [1] > +-- bcm2709-rpi-2-b.dtb [1] > +-- bcm2710-rpi-3-b.dtb [1] > +-- bcm2710-rpi-3-b-plus.dtb [1] > diff --git a/board/raspberrypizero2 b/board/raspberrypizero2 > new file mode 120000 > index 0000000000..fcdafc81ed > --- /dev/null > +++ b/board/raspberrypizero2 > @@ -0,0 +1 @@ > +raspberrypi > \ No newline at end of file > diff --git a/configs/raspberrypizero2_defconfig b/configs/raspberrypizero2_defconfig > new file mode 100644 > index 0000000000..81d92ee6b7 > --- /dev/null > +++ b/configs/raspberrypizero2_defconfig > @@ -0,0 +1,38 @@ > +BR2_arm=y > +BR2_cortex_a53=y > +BR2_ARM_FPU_NEON_VFPV4=y > + > +# Linux headers same as kernel, 5.10 series > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y > + > +BR2_TOOLCHAIN_BUILDROOT_CXX=y > + > +BR2_LINUX_KERNEL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,24c8b0546a820222a1ebcfe606dfacb0e228c466)/linux-24c8b0546a820222a1ebcfe606dfacb0e228c466.tar.gz" > +BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" > + > +# The zero2 uses the same processor as the Raspberry Pi 3 with the same > +# form-factor as the zero-w For the dts not the form-factor but the board layout/components are important... > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w" With commit [1] a new bcm2710-rpi-zero-2.dtb is available... Seems time for an rpi linux-kernel/rpi-firmware update to support the new hardware... Otherwise the patch looks good... Sorry no rpi-zero-2-w hardware for testing ;-) Regards, Peter [1] https://github.com/raspberrypi/linux/commit/84dc624be6ae704fdb3c413b7d86315cf49fbb0b > + > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > + > +BR2_PACKAGE_RPI_FIRMWARE=y > +BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y > +BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y > +BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypizero2/config_zero2.txt" > + > +# MicroSD images generation tools > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > +BR2_PACKAGE_HOST_GENIMAGE=y > +BR2_PACKAGE_HOST_MTOOLS=y > + > +# Filesystem / image > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_ROOTFS_EXT2_4=y > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" > +# BR2_TARGET_ROOTFS_TAR is not set > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2/post-build.sh" > +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2/post-image.sh" _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Buildroot] [PATCH 1/1] board/raspberrypi: add Raspberry Pi Zero 2 W 2021-10-28 21:23 ` Peter Seiderer @ 2021-10-29 10:08 ` Julien Grossholtz 0 siblings, 0 replies; 4+ messages in thread From: Julien Grossholtz @ 2021-10-29 10:08 UTC (permalink / raw) To: Peter Seiderer; +Cc: Martin Bark, buildroot Hello Peter, Thank you for the review. See my answers below : Le jeu. 28 oct. 2021 à 23:23, Peter Seiderer <ps.report@gmx.net> a écrit : > > Hello Julien, > > thanks for (the fast) contribution of the new rpi variant, comments below... I had the chance to receive the new Pi Zero a little before its release :). > > On Thu, 28 Oct 2021 08:26:17 +0200, Julien Grossholtz <julien.grossholtz@openest.io> wrote: > > > The Raspberry-Pi Zero 2 W is an affordable single board computer. It is > > a more powerful drop-in replacement for the Raspberry Pi Zero W. > > > > The board incorporates an Raspberry-Pi RP3A0 system-in-package (SiP) with > > a Broadcom BCM2710A1 and 512MB LPDDR2 SDRAM. The CPU is a quad-core 1Ghz > > 64-bit Arm Cortex-A53. As for other Raspberry-Pis it also provides > > 2.4GHz 802.11 b/g/n Wifi, Bluetooth 4.2 and BLE. > > > > The BCM2710 cpu is similar to the Raspberry-Pi 3 and the form factor is > > the same as the previous Zero W. Therefore, this board support uses the > > Pi 3's Linux configuration and the original Zero W device-tree. > > > > Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io> > > --- > > board/raspberrypi/config_zero2.txt | 29 ++++++++++++++ > > .../raspberrypi/genimage-raspberrypizero2.cfg | 31 +++++++++++++++ > > board/raspberrypi/readme.txt | 5 +++ > > board/raspberrypizero2 | 1 + > > configs/raspberrypizero2_defconfig | 38 +++++++++++++++++++ > > 5 files changed, 104 insertions(+) > > create mode 100644 board/raspberrypi/config_zero2.txt > > create mode 100644 board/raspberrypi/genimage-raspberrypizero2.cfg > > create mode 120000 board/raspberrypizero2 > > create mode 100644 configs/raspberrypizero2_defconfig > > > > diff --git a/board/raspberrypi/config_zero2.txt b/board/raspberrypi/config_zero2.txt > > new file mode 100644 > > index 0000000000..9e6b7f5ccf > > --- /dev/null > > +++ b/board/raspberrypi/config_zero2.txt > > @@ -0,0 +1,29 @@ > > +# Please note that this is only a sample, we recommend you to change it to fit > > +# your needs. > > +# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE. > > +# See http://buildroot.org/manual.html#rootfs-custom > > +# and http://elinux.org/RPiconfig for a description of config.txt syntax > > + > > +start_file=start.elf > > +fixup_file=fixup.dat > > + > > +kernel=zImage > > + > > +# To use an external initramfs file > > +#initramfs rootfs.cpio.gz > > + > > +# Disable overscan assuming the display supports displaying the full resolution > > +# If the text shown on the screen disappears off the edge, comment this out > > +disable_overscan=1 > > + > > +# How much memory in MB to assign to the GPU on Pi models having > > +# 256, 512 or 1024 MB total memory > > +gpu_mem_256=100 > > +gpu_mem_512=100 > > +gpu_mem_1024=100 > > + > > +# fixes rpi (3B, 3B+, 3A+, 4B ,zero W and zero 2) ttyAMA0 serial console > > +dtoverlay=miniuart-bt > > + > > +# enable autoprobing of Bluetooth driver without need of hciattach/btattach > > +dtoverlay=krnbt=on > > diff --git a/board/raspberrypi/genimage-raspberrypizero2.cfg b/board/raspberrypi/genimage-raspberrypizero2.cfg > > new file mode 100644 > > index 0000000000..f76256ef8a > > --- /dev/null > > +++ b/board/raspberrypi/genimage-raspberrypizero2.cfg > > @@ -0,0 +1,31 @@ > > +image boot.vfat { > > + vfat { > > + files = { > > + "bcm2708-rpi-zero-w.dtb", > > + "rpi-firmware/bootcode.bin", > > + "rpi-firmware/cmdline.txt", > > + "rpi-firmware/config.txt", > > + "rpi-firmware/fixup.dat", > > + "rpi-firmware/start.elf", > > + "rpi-firmware/overlays", > > + "zImage" > > + } > > + } > > + size = 32M > > +} > > + > > +image sdcard.img { > > + hdimage { > > + } > > + > > + partition boot { > > + partition-type = 0xC > > + bootable = "true" > > + image = "boot.vfat" > > + } > > + > > + partition rootfs { > > + partition-type = 0x83 > > + image = "rootfs.ext4" > > + } > > +} > > diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt > > index 98c44d80a1..7d134d17fb 100644 > > --- a/board/raspberrypi/readme.txt > > +++ b/board/raspberrypi/readme.txt > > @@ -28,6 +28,10 @@ For model Zero (model A+ in smaller form factor): > > > > $ make raspberrypi0_defconfig > > > > +For model Zero 2 (model B3 in smaller form factor): > > + > > + $ make raspberrypizero2_defconfig > > + > > For model 2 B: > > > > $ make raspberrypi2_defconfig > > @@ -76,6 +80,7 @@ After building, you should obtain this tree: > > output/images/ > > +-- bcm2708-rpi-b.dtb [1] > > +-- bcm2708-rpi-b-plus.dtb [1] > > + +-- bcm2708-rpi-zero-w.dtb [1] > > +-- bcm2709-rpi-2-b.dtb [1] > > +-- bcm2710-rpi-3-b.dtb [1] > > +-- bcm2710-rpi-3-b-plus.dtb [1] > > diff --git a/board/raspberrypizero2 b/board/raspberrypizero2 > > new file mode 120000 > > index 0000000000..fcdafc81ed > > --- /dev/null > > +++ b/board/raspberrypizero2 > > @@ -0,0 +1 @@ > > +raspberrypi > > \ No newline at end of file > > diff --git a/configs/raspberrypizero2_defconfig b/configs/raspberrypizero2_defconfig > > new file mode 100644 > > index 0000000000..81d92ee6b7 > > --- /dev/null > > +++ b/configs/raspberrypizero2_defconfig > > @@ -0,0 +1,38 @@ > > +BR2_arm=y > > +BR2_cortex_a53=y > > +BR2_ARM_FPU_NEON_VFPV4=y > > + > > +# Linux headers same as kernel, 5.10 series > > +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y > > + > > +BR2_TOOLCHAIN_BUILDROOT_CXX=y > > + > > +BR2_LINUX_KERNEL=y > > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,24c8b0546a820222a1ebcfe606dfacb0e228c466)/linux-24c8b0546a820222a1ebcfe606dfacb0e228c466.tar.gz" > > +BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" > > + > > +# The zero2 uses the same processor as the Raspberry Pi 3 with the same > > +# form-factor as the zero-w > > For the dts not the form-factor but the board layout/components > are important... > > > +BR2_LINUX_KERNEL_DTS_SUPPORT=y > > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w" > > With commit [1] a new bcm2710-rpi-zero-2.dtb is available... Until now, the board was booting with the same dtb as the previous Pi Zero on RaspberryPi-OS. But, clearly it is better to use the one they committed yesterday on their kernel. Thanks for pointing it out. I will update this patch and send a kernel bump for all Raspberry-Pi boards. They merged Linux upstream 5.10.y yesterday [2], I believe it should be a good entry point for this bump. > > Seems time for an rpi linux-kernel/rpi-firmware update to support > the new hardware... > > Otherwise the patch looks good... I was not sure about the file naming (see the cover letter from with my patch). > > Sorry no rpi-zero-2-w hardware for testing ;-) I am pretty sure you will have one soon :) > > Regards, > Peter > > [1] https://github.com/raspberrypi/linux/commit/84dc624be6ae704fdb3c413b7d86315cf49fbb0b > > > + > > +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y > > + > > +BR2_PACKAGE_RPI_FIRMWARE=y > > +BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y > > +BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y > > +BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypizero2/config_zero2.txt" > > + > > +# MicroSD images generation tools > > +BR2_PACKAGE_HOST_DOSFSTOOLS=y > > +BR2_PACKAGE_HOST_GENIMAGE=y > > +BR2_PACKAGE_HOST_MTOOLS=y > > + > > +# Filesystem / image > > +BR2_TARGET_ROOTFS_EXT2=y > > +BR2_TARGET_ROOTFS_EXT2_4=y > > +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" > > +# BR2_TARGET_ROOTFS_TAR is not set > > +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2/post-build.sh" > > +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2/post-image.sh" > Thanks, Julien [2] https://github.com/raspberrypi/linux/commit/581049d718caf95f5feb00607ac748d5841cf27c _______________________________________________ buildroot mailing list buildroot@buildroot.org https://lists.buildroot.org/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-10-29 10:26 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-10-28 6:26 [Buildroot] [PATCH 0/1] Raspberry-Pi Zero 2 W support Julien Grossholtz 2021-10-28 6:26 ` [Buildroot] [PATCH 1/1] board/raspberrypi: add Raspberry Pi Zero 2 W Julien Grossholtz 2021-10-28 21:23 ` Peter Seiderer 2021-10-29 10:08 ` Julien Grossholtz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox