* [Buildroot] [PATCH 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 21:36 ` Yann E. MORIN
2022-02-06 20:05 ` [Buildroot] [PATCH 02/16] board/beaglev/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
` (14 subsequent siblings)
15 siblings, 1 reply; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/aarch64-efi/genimage-efi.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/aarch64-efi/genimage-efi.cfg b/board/aarch64-efi/genimage-efi.cfg
index 87e85816bc..7fbe13d390 100644
--- a/board/aarch64-efi/genimage-efi.cfg
+++ b/board/aarch64-efi/genimage-efi.cfg
@@ -18,13 +18,13 @@ image disk.img {
partition boot {
image = "efi-part.vfat"
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = U
offset = 32K
bootable = true
}
partition root {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
+ partition-type-uuid = L
image = "rootfs.ext2"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [Buildroot] [PATCH 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-06 20:05 ` [Buildroot] [PATCH 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
@ 2022-02-06 21:36 ` Yann E. MORIN
2022-02-07 7:55 ` Thomas Petazzoni via buildroot
0 siblings, 1 reply; 39+ messages in thread
From: Yann E. MORIN @ 2022-02-06 21:36 UTC (permalink / raw)
To: Giulio Benetti
Cc: Sergey Matyukevich, Alistair Francis, Gerome Burlats, Jagan Teki,
Thomas Petazzoni, Suniel Mahesh, Romain Naour, buildroot
Giulio, All,
FTR, a little recap of what we discussed on IRC, see below
On 2022-02-06 21:05 +0100, Giulio Benetti spake thusly:
> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> ---
> board/aarch64-efi/genimage-efi.cfg | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/aarch64-efi/genimage-efi.cfg b/board/aarch64-efi/genimage-efi.cfg
> index 87e85816bc..7fbe13d390 100644
> --- a/board/aarch64-efi/genimage-efi.cfg
> +++ b/board/aarch64-efi/genimage-efi.cfg
> @@ -18,13 +18,13 @@ image disk.img {
>
> partition boot {
> image = "efi-part.vfat"
> - partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
> + partition-type-uuid = U
> offset = 32K
> bootable = true
> }
>
> partition root {
> - partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
> + partition-type-uuid = L
As we discussed on IRC, this is not the same thing. genimage will extend
the 'L' shorthand to the full UUID 0fc63daf-8483-4772-8e79-3d69d8477de4,
which is different.
So I don't think uaing the shorthands are correct.
The UUID assignments are available on Wikipedia:
https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
But the systemd docuemntation has extra UUID definitions:
https://man.archlinux.org/man/systemd-gpt-auto-generator.8
And finally, if neither resources has a UUID for a specific
architecture, we can still use the 'generic' "Linux filesystem data"
UUID 0FC63DAF-8483-4772-8E79-3D69D8477DE4.
Regards,
Yann E. MORIN.
> image = "rootfs.ext2"
> }
> }
> --
> 2.25.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [Buildroot] [PATCH 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-06 21:36 ` Yann E. MORIN
@ 2022-02-07 7:55 ` Thomas Petazzoni via buildroot
2022-02-07 17:37 ` Yann E. MORIN
0 siblings, 1 reply; 39+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-02-07 7:55 UTC (permalink / raw)
To: Yann E. MORIN
Cc: Sergey Matyukevich, Alistair Francis, Gerome Burlats, Jagan Teki,
Suniel Mahesh, Giulio Benetti, buildroot, Romain Naour
Hello,
On Sun, 6 Feb 2022 22:36:57 +0100
"Yann E. MORIN" <yann.morin.1998@free.fr> wrote:
> > partition root {
> > - partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
> > + partition-type-uuid = L
>
> As we discussed on IRC, this is not the same thing. genimage will extend
> the 'L' shorthand to the full UUID 0fc63daf-8483-4772-8e79-3d69d8477de4,
> which is different.
And? Is that really important?
> So I don't think uaing the shorthands are correct.
Why?
> The UUID assignments are available on Wikipedia:
> https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
>
> But the systemd docuemntation has extra UUID definitions:
> https://man.archlinux.org/man/systemd-gpt-auto-generator.8
Yes, but how useful are they?
Unless these systemd-defined UUID are really relevant, I would prefer
that we use the shortcuts provided by genimage wherever possible, and
only rely on using the full UUID for special cases, such as the
board/sifive/hifive-unleashed/genimage_sdcard.cfg (PATCH 15/16).
This way, it would be pretty clear that we have the "common cases" (boot
partition, rootfs partition) and the "odd/special cases".
Best regards,
Thomas
--
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [Buildroot] [PATCH 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-07 7:55 ` Thomas Petazzoni via buildroot
@ 2022-02-07 17:37 ` Yann E. MORIN
2022-02-13 15:06 ` Arnout Vandecappelle
0 siblings, 1 reply; 39+ messages in thread
From: Yann E. MORIN @ 2022-02-07 17:37 UTC (permalink / raw)
To: Thomas Petazzoni
Cc: Sergey Matyukevich, Alistair Francis, Gerome Burlats, Jagan Teki,
Suniel Mahesh, Giulio Benetti, buildroot, Romain Naour
Thomas, All,
On 2022-02-07 08:55 +0100, Thomas Petazzoni spake thusly:
> On Sun, 6 Feb 2022 22:36:57 +0100
> "Yann E. MORIN" <yann.morin.1998@free.fr> wrote:
> > > partition root {
> > > - partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
> > > + partition-type-uuid = L
> > As we discussed on IRC, this is not the same thing. genimage will extend
> > the 'L' shorthand to the full UUID 0fc63daf-8483-4772-8e79-3d69d8477de4,
> > which is different.
> And? Is that really important?
> > So I don't think uaing the shorthands are correct.
> Why?
I think that it is important that we do adhere to the expected values;
see below...
> > The UUID assignments are available on Wikipedia:
> > https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
> > But the systemd docuemntation has extra UUID definitions:
> > https://man.archlinux.org/man/systemd-gpt-auto-generator.8
> Yes, but how useful are they?
Why would we diverge from the specs?
> Unless these systemd-defined UUID are really relevant, I would prefer
> that we use the shortcuts provided by genimage wherever possible, and
> only rely on using the full UUID for special cases, such as the
> board/sifive/hifive-unleashed/genimage_sdcard.cfg (PATCH 15/16).
There are tools that expect those values, to autodetect partitions. This
is the case, of course, of systemd-gpt-auto-generator, which will lookup
the partition UUIDs, but other tools may expect these UUIDs too.
I am not saying that we would cause trouble by changing our board
descriptions, but if we want to allow people to just copy them as the
base for their own development, then diverging from expected behaviour
is not nice.
> This way, it would be pretty clear that we have the "common cases" (boot
> partition, rootfs partition) and the "odd/special cases".
I think the "common case" would be "adhere to spec, use specified
values", while the exceptions are "the spec says nothing, use something
else and comment it".
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [Buildroot] [PATCH 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-07 17:37 ` Yann E. MORIN
@ 2022-02-13 15:06 ` Arnout Vandecappelle
2022-02-13 22:24 ` Giulio Benetti
0 siblings, 1 reply; 39+ messages in thread
From: Arnout Vandecappelle @ 2022-02-13 15:06 UTC (permalink / raw)
To: Yann E. MORIN, Thomas Petazzoni
Cc: Sergey Matyukevich, Alistair Francis, Gerome Burlats, Jagan Teki,
Suniel Mahesh, Giulio Benetti, buildroot, Romain Naour
On 07/02/2022 18:37, Yann E. MORIN wrote:
> Thomas, All,
>
> On 2022-02-07 08:55 +0100, Thomas Petazzoni spake thusly:
>> On Sun, 6 Feb 2022 22:36:57 +0100
>> "Yann E. MORIN" <yann.morin.1998@free.fr> wrote:
>>>> partition root {
>>>> - partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
>>>> + partition-type-uuid = L
>>> As we discussed on IRC, this is not the same thing. genimage will extend
>>> the 'L' shorthand to the full UUID 0fc63daf-8483-4772-8e79-3d69d8477de4,
>>> which is different.
>> And? Is that really important?
>>> So I don't think uaing the shorthands are correct.
>> Why?
>
> I think that it is important that we do adhere to the expected values;
> see below...
>
>>> The UUID assignments are available on Wikipedia:
>>> https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
>>> But the systemd docuemntation has extra UUID definitions:
>>> https://man.archlinux.org/man/systemd-gpt-auto-generator.8
>> Yes, but how useful are they?
>
> Why would we diverge from the specs?
>
>> Unless these systemd-defined UUID are really relevant, I would prefer
>> that we use the shortcuts provided by genimage wherever possible, and
>> only rely on using the full UUID for special cases, such as the
>> board/sifive/hifive-unleashed/genimage_sdcard.cfg (PATCH 15/16).
>
> There are tools that expect those values, to autodetect partitions. This
> is the case, of course, of systemd-gpt-auto-generator, which will lookup
> the partition UUIDs, but other tools may expect these UUIDs too.
At least for systemd-gpt-auto-generator, the UUID for rootfs is only relevant
in case systemd is the one mounting the rootfs, i.e. in case of it running from
initramfs and pivoting into a mounted root.
That is not a scenario that we support in Buildroot, by a long shot.
Therefore, my suggestion would be to use the default Linux partition type for
the rootfs, i.e. L. Since this is actually the default for genimage, I would
even leave it out completely.
Giulio, that would mean rewriting this series and removing everywhere L is
specified. Do you agree with that?
> I am not saying that we would cause trouble by changing our board
> descriptions, but if we want to allow people to just copy them as the
> base for their own development, then diverging from expected behaviour
> is not nice.
I think the cases where a non-standard (where "standard" means the actual GPT
standard, not the additional stuff that systemd invented) partition type is
relevant are going to be so unusual that the default we put in our genimage.cfg
is going to be of no relevance whatsoever.
Regards,
Arnout
>
>> This way, it would be pretty clear that we have the "common cases" (boot
>> partition, rootfs partition) and the "odd/special cases".
>
> I think the "common case" would be "adhere to spec, use specified
> values", while the exceptions are "the spec says nothing, use something
> else and comment it".
>
> Regards,
> Yann E. MORIN.
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 39+ messages in thread* Re: [Buildroot] [PATCH 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-13 15:06 ` Arnout Vandecappelle
@ 2022-02-13 22:24 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
2022-02-13 22:54 ` [Buildroot] [PATCH v2 14/16] board/sifive/hifive-unleashed/genimage_sdcard: remove partition-type-uuid since its default value is L(rootfs) Giulio Benetti
0 siblings, 2 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:24 UTC (permalink / raw)
To: Arnout Vandecappelle, Yann E. MORIN, Thomas Petazzoni
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, buildroot, Romain Naour
Hi Arnout, Yann, Thomas, All,
On 13/02/22 16:06, Arnout Vandecappelle wrote:
>
>
> On 07/02/2022 18:37, Yann E. MORIN wrote:
>> Thomas, All,
>>
>> On 2022-02-07 08:55 +0100, Thomas Petazzoni spake thusly:
>>> On Sun, 6 Feb 2022 22:36:57 +0100
>>> "Yann E. MORIN" <yann.morin.1998@free.fr> wrote:
>>>>> partition root {
>>>>> - partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
>>>>> + partition-type-uuid = L
>>>> As we discussed on IRC, this is not the same thing. genimage will extend
>>>> the 'L' shorthand to the full UUID 0fc63daf-8483-4772-8e79-3d69d8477de4,
>>>> which is different.
>>> And? Is that really important?
>>>> So I don't think uaing the shorthands are correct.
>>> Why?
>>
>> I think that it is important that we do adhere to the expected values;
>> see below...
>>
>>>> The UUID assignments are available on Wikipedia:
>>>> https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
>>>> But the systemd docuemntation has extra UUID definitions:
>>>> https://man.archlinux.org/man/systemd-gpt-auto-generator.8
>>> Yes, but how useful are they?
>>
>> Why would we diverge from the specs?
>>
>>> Unless these systemd-defined UUID are really relevant, I would prefer
>>> that we use the shortcuts provided by genimage wherever possible, and
>>> only rely on using the full UUID for special cases, such as the
>>> board/sifive/hifive-unleashed/genimage_sdcard.cfg (PATCH 15/16).
>>
>> There are tools that expect those values, to autodetect partitions. This
>> is the case, of course, of systemd-gpt-auto-generator, which will lookup
>> the partition UUIDs, but other tools may expect these UUIDs too.
>
> At least for systemd-gpt-auto-generator, the UUID for rootfs is only relevant
> in case systemd is the one mounting the rootfs, i.e. in case of it running from
> initramfs and pivoting into a mounted root.
>
> That is not a scenario that we support in Buildroot, by a long shot.
> Therefore, my suggestion would be to use the default Linux partition type for
> the rootfs, i.e. L. Since this is actually the default for genimage, I would
> even leave it out completely.
>
> Giulio, that would mean rewriting this series and removing everywhere L is
> specified. Do you agree with that?
I'm going to rework and remove L, less code we have the better IMHO.
Also, this gives less ambiguity on letters, because we're going to end
up only having:
F => Fat
U => Efi(that recalls UEFI(to me at least) even if it's not the same
thing as EFI)
>
>> I am not saying that we would cause trouble by changing our board
>> descriptions, but if we want to allow people to just copy them as the
>> base for their own development, then diverging from expected behaviour
>> is not nice.
>
> I think the cases where a non-standard (where "standard" means the actual GPT
> standard, not the additional stuff that systemd invented) partition type is
> relevant are going to be so unusual that the default we put in our genimage.cfg
> is going to be of no relevance whatsoever.
Yes, I agree too. At least for the moment I would use the genimage
letters and if needed we can modify it later.
Thank you all!
Best regards
--
Giulio Benetti
Benetti Engineering sas
> Regards,
> Arnout
>
>
>>
>>> This way, it would be pretty clear that we have the "common cases" (boot
>>> partition, rootfs partition) and the "odd/special cases".
>>
>> I think the "common case" would be "adhere to spec, use specified
>> values", while the exceptions are "the spec says nothing, use something
>> else and comment it".
>>
>> Regards,
>> Yann E. MORIN.
>>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid
2022-02-13 22:24 ` Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
` (12 more replies)
2022-02-13 22:54 ` [Buildroot] [PATCH v2 14/16] board/sifive/hifive-unleashed/genimage_sdcard: remove partition-type-uuid since its default value is L(rootfs) Giulio Benetti
1 sibling, 13 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
This patchset convert partition-type-uuid to single letter notation
*without* "" and without L(rootfs) since it's the default value for
partition-type-uuid if it's not specified.
V1->V2:
* remove every partition-type-uuid = L as suggested by Arnout
Giulio Benetti (16):
board/aarch64-efi/genimage-efi: convert partition-type-uuid to single
letter notation
board/beaglev/genimage-efi: remove partition-type-uuid since its
default value is L(rootfs)
board/friendlyarm/nanopc-t4/genimage: convert partition-type-uuid to
single letter notation
board/friendlyarm/nanopi-m4/genimage: convert partition-type-uuid to
single letter notation
board/orangepi/orangepi-pc-plus/genimage: keep partition-type-uuid
without "" for consistency
board/orangepi/orangepi-r1/genimage: fix partition-type-uuid for boot
partition and remove "" for consistency
board/orangepi/orangepi-zero-plus2/genimage: keep partition-type-uuid
without "" for consistency
board/pc/genimage-efi: convert partition-type-uuid to single letter
notation
board/pine64/rockpro64/genimage: convert partition-type-uuid to single
letter notation
board/qemu/aarch64-sbsa/genimage: convert partition-type-uuid to
single letter notation
board/radxa/rockpi-n4/genimage: convert partition-type-uuid to single
letter notation
board/radxa/rockpi-n10/genimage: convert partition-type-uuid to single
letter notation
board/radxa/rockpi-n8/genimage: convert partition-type-uuid to single
letter notation
board/sifive/hifive-unleashed/genimage_sdcard: remove
partition-type-uuid since its default value is L(rootfs)
board/sifive/hifive-unleashed/genimage_sdcard: add comments to
particular partition-type-uuid parameters
board/sifive/hifive-unleashed/genimage_spi-nor: add comments to
particular partition-type-uuid parameters
board/aarch64-efi/genimage-efi.cfg | 3 +--
board/beaglev/genimage.cfg | 2 +-
board/friendlyarm/nanopc-t4/genimage.cfg | 3 +--
board/friendlyarm/nanopi-m4/genimage.cfg | 3 +--
board/orangepi/orangepi-pc-plus/genimage.cfg | 3 +--
board/orangepi/orangepi-r1/genimage.cfg | 3 +--
board/orangepi/orangepi-zero-plus2/genimage.cfg | 3 +--
board/pc/genimage-efi.cfg | 3 +--
board/pine64/rockpro64/genimage.cfg | 3 +--
board/qemu/aarch64-sbsa/genimage.cfg | 3 +--
board/radxa/rockpi-4/genimage.cfg | 3 +--
board/radxa/rockpi-n10/genimage.cfg | 3 +--
board/radxa/rockpi-n8/genimage.cfg | 4 ++--
board/sifive/hifive-unleashed/genimage_sdcard.cfg | 3 ++-
board/sifive/hifive-unleashed/genimage_spi-nor.cfg | 2 ++
15 files changed, 18 insertions(+), 26 deletions(-)
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 02/16] board/beaglev/genimage-efi: remove partition-type-uuid since its default value is L(rootfs) Giulio Benetti
` (11 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/aarch64-efi/genimage-efi.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/aarch64-efi/genimage-efi.cfg b/board/aarch64-efi/genimage-efi.cfg
index 87e85816bc..3708727c18 100644
--- a/board/aarch64-efi/genimage-efi.cfg
+++ b/board/aarch64-efi/genimage-efi.cfg
@@ -18,13 +18,12 @@ image disk.img {
partition boot {
image = "efi-part.vfat"
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = U
offset = 32K
bootable = true
}
partition root {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
image = "rootfs.ext2"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 02/16] board/beaglev/genimage-efi: remove partition-type-uuid since its default value is L(rootfs)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 03/16] board/friendlyarm/nanopc-t4/genimage: convert partition-type-uuid to single letter notation Giulio Benetti
` (10 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/beaglev/genimage.cfg | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/beaglev/genimage.cfg b/board/beaglev/genimage.cfg
index deefdbc110..54f9118ea9 100644
--- a/board/beaglev/genimage.cfg
+++ b/board/beaglev/genimage.cfg
@@ -4,7 +4,7 @@ image sdcard.img {
}
partition rootfs {
- partition-type-uuid = 72ec70a6-cf74-40e6-bd49-4bda08e8f224
+ partition-type-uuid = L
partition-uuid = 0fef845a-c6e1-45bc-82f7-002fa720f958
bootable = "true"
image = "rootfs.ext4"
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 03/16] board/friendlyarm/nanopc-t4/genimage: convert partition-type-uuid to single letter notation
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 02/16] board/beaglev/genimage-efi: remove partition-type-uuid since its default value is L(rootfs) Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 04/16] board/friendlyarm/nanopi-m4/genimage: " Giulio Benetti
` (9 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/friendlyarm/nanopc-t4/genimage.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/friendlyarm/nanopc-t4/genimage.cfg b/board/friendlyarm/nanopc-t4/genimage.cfg
index 98dc2f3892..f966d48f3f 100644
--- a/board/friendlyarm/nanopc-t4/genimage.cfg
+++ b/board/friendlyarm/nanopc-t4/genimage.cfg
@@ -26,14 +26,13 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 04/16] board/friendlyarm/nanopi-m4/genimage: convert partition-type-uuid to single letter notation
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (2 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 03/16] board/friendlyarm/nanopc-t4/genimage: convert partition-type-uuid to single letter notation Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 05/16] board/orangepi/orangepi-pc-plus/genimage: keep partition-type-uuid without "" for consistency Giulio Benetti
` (8 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/friendlyarm/nanopi-m4/genimage.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/friendlyarm/nanopi-m4/genimage.cfg b/board/friendlyarm/nanopi-m4/genimage.cfg
index 8d0e6ad13b..db1205bfbf 100644
--- a/board/friendlyarm/nanopi-m4/genimage.cfg
+++ b/board/friendlyarm/nanopi-m4/genimage.cfg
@@ -26,14 +26,13 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 05/16] board/orangepi/orangepi-pc-plus/genimage: keep partition-type-uuid without "" for consistency
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (3 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 04/16] board/friendlyarm/nanopi-m4/genimage: " Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 06/16] board/orangepi/orangepi-r1/genimage: fix partition-type-uuid for boot partition and remove " Giulio Benetti
` (7 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value, so let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/orangepi/orangepi-pc-plus/genimage.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/orangepi/orangepi-pc-plus/genimage.cfg b/board/orangepi/orangepi-pc-plus/genimage.cfg
index 3812d785d5..2c68b28e10 100644
--- a/board/orangepi/orangepi-pc-plus/genimage.cfg
+++ b/board/orangepi/orangepi-pc-plus/genimage.cfg
@@ -28,7 +28,7 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = "F"
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
}
@@ -36,7 +36,6 @@ image sdcard.img {
# 'rootfs' will be used as the partition label, used
# with root=PARTLABEL=rootfs kernel command line
partition rootfs {
- partition-type-uuid = "L"
image = "rootfs.ext4"
size = 512M
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 06/16] board/orangepi/orangepi-r1/genimage: fix partition-type-uuid for boot partition and remove "" for consistency
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (4 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 05/16] board/orangepi/orangepi-pc-plus/genimage: keep partition-type-uuid without "" for consistency Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 07/16] board/orangepi/orangepi-zero-plus2/genimage: keep partition-type-uuid without " Giulio Benetti
` (6 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/orangepi/orangepi-r1/genimage.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/orangepi/orangepi-r1/genimage.cfg b/board/orangepi/orangepi-r1/genimage.cfg
index e93e802bd9..da96e4c4b8 100644
--- a/board/orangepi/orangepi-r1/genimage.cfg
+++ b/board/orangepi/orangepi-r1/genimage.cfg
@@ -28,7 +28,7 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = "U"
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
}
@@ -36,7 +36,6 @@ image sdcard.img {
# 'rootfs' will be used as the partition label, used
# with root=PARTLABEL=rootfs kernel command line
partition rootfs {
- partition-type-uuid = "L"
image = "rootfs.ext4"
size = 512M
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 07/16] board/orangepi/orangepi-zero-plus2/genimage: keep partition-type-uuid without "" for consistency
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (5 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 06/16] board/orangepi/orangepi-r1/genimage: fix partition-type-uuid for boot partition and remove " Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 08/16] board/pc/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
` (5 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/orangepi/orangepi-zero-plus2/genimage.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/orangepi/orangepi-zero-plus2/genimage.cfg b/board/orangepi/orangepi-zero-plus2/genimage.cfg
index 5a7ee7707a..0a03384f30 100644
--- a/board/orangepi/orangepi-zero-plus2/genimage.cfg
+++ b/board/orangepi/orangepi-zero-plus2/genimage.cfg
@@ -26,7 +26,7 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = "F"
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
}
@@ -34,7 +34,6 @@ image sdcard.img {
# 'rootfs' will be used as the partition label, used
# with root=PARTLABEL=rootfs kernel command line
partition rootfs {
- partition-type-uuid = "L"
image = "rootfs.ext4"
size = 256M
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 08/16] board/pc/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (6 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 07/16] board/orangepi/orangepi-zero-plus2/genimage: keep partition-type-uuid without " Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 09/16] board/pine64/rockpro64/genimage: " Giulio Benetti
` (4 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/pc/genimage-efi.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/pc/genimage-efi.cfg b/board/pc/genimage-efi.cfg
index 035a077a78..68498772a1 100644
--- a/board/pc/genimage-efi.cfg
+++ b/board/pc/genimage-efi.cfg
@@ -19,13 +19,12 @@ image disk.img {
partition boot {
image = "efi-part.vfat"
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = U
offset = 32K
bootable = true
}
partition root {
- partition-type-uuid = 44479540-f297-41b2-9af7-d131d5f0458a
partition-uuid = UUID_TMP
image = "rootfs.ext2"
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 09/16] board/pine64/rockpro64/genimage: convert partition-type-uuid to single letter notation
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (7 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 08/16] board/pc/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 10/16] board/qemu/aarch64-sbsa/genimage: " Giulio Benetti
` (3 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/pine64/rockpro64/genimage.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/pine64/rockpro64/genimage.cfg b/board/pine64/rockpro64/genimage.cfg
index d3926f2df6..978a77de95 100644
--- a/board/pine64/rockpro64/genimage.cfg
+++ b/board/pine64/rockpro64/genimage.cfg
@@ -26,14 +26,13 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 10/16] board/qemu/aarch64-sbsa/genimage: convert partition-type-uuid to single letter notation
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (8 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 09/16] board/pine64/rockpro64/genimage: " Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 11/16] board/radxa/rockpi-n4/genimage: " Giulio Benetti
` (2 subsequent siblings)
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/qemu/aarch64-sbsa/genimage.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/qemu/aarch64-sbsa/genimage.cfg b/board/qemu/aarch64-sbsa/genimage.cfg
index bdf8a89d75..8308b58789 100644
--- a/board/qemu/aarch64-sbsa/genimage.cfg
+++ b/board/qemu/aarch64-sbsa/genimage.cfg
@@ -19,13 +19,12 @@ image disk.img {
partition boot {
image = "efi-part.vfat"
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = U
offset = 32K
bootable = true
}
partition root {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
image = "rootfs.ext2"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 11/16] board/radxa/rockpi-n4/genimage: convert partition-type-uuid to single letter notation
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (9 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 10/16] board/qemu/aarch64-sbsa/genimage: " Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 12/16] board/radxa/rockpi-n10/genimage: " Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 13/16] board/radxa/rockpi-n8/genimage: " Giulio Benetti
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/radxa/rockpi-4/genimage.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/radxa/rockpi-4/genimage.cfg b/board/radxa/rockpi-4/genimage.cfg
index 68cc4d61a8..07bee5bf81 100644
--- a/board/radxa/rockpi-4/genimage.cfg
+++ b/board/radxa/rockpi-4/genimage.cfg
@@ -26,14 +26,13 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 12/16] board/radxa/rockpi-n10/genimage: convert partition-type-uuid to single letter notation
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (10 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 11/16] board/radxa/rockpi-n4/genimage: " Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 13/16] board/radxa/rockpi-n8/genimage: " Giulio Benetti
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/radxa/rockpi-n10/genimage.cfg | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/board/radxa/rockpi-n10/genimage.cfg b/board/radxa/rockpi-n10/genimage.cfg
index 7f4b639bbc..cd0e3610c2 100644
--- a/board/radxa/rockpi-n10/genimage.cfg
+++ b/board/radxa/rockpi-n10/genimage.cfg
@@ -26,14 +26,13 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 13/16] board/radxa/rockpi-n8/genimage: convert partition-type-uuid to single letter notation
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (11 preceding siblings ...)
2022-02-13 22:53 ` [Buildroot] [PATCH v2 12/16] board/radxa/rockpi-n10/genimage: " Giulio Benetti
@ 2022-02-13 22:53 ` Giulio Benetti
12 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:53 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Note that rootfs doesn't need partition-type-uuid = L since L(rootfs) is
the default value. So let's remove it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/radxa/rockpi-n8/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/radxa/rockpi-n8/genimage.cfg b/board/radxa/rockpi-n8/genimage.cfg
index 909a646499..3fced4a5d8 100644
--- a/board/radxa/rockpi-n8/genimage.cfg
+++ b/board/radxa/rockpi-n8/genimage.cfg
@@ -26,14 +26,14 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3
+ partition-type-uuid = L
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [Buildroot] [PATCH v2 14/16] board/sifive/hifive-unleashed/genimage_sdcard: remove partition-type-uuid since its default value is L(rootfs)
2022-02-13 22:24 ` Giulio Benetti
2022-02-13 22:53 ` [Buildroot] [PATCH v2 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
@ 2022-02-13 22:54 ` Giulio Benetti
2022-02-13 22:54 ` [Buildroot] [PATCH v2 15/16] board/sifive/hifive-unleashed/genimage_sdcard: add comments to particular partition-type-uuid parameters Giulio Benetti
2022-02-13 22:54 ` [Buildroot] [PATCH v2 16/16] board/sifive/hifive-unleashed/genimage_spi-nor: " Giulio Benetti
1 sibling, 2 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:54 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/sifive/hifive-unleashed/genimage_sdcard.cfg | 1 -
1 file changed, 1 deletion(-)
diff --git a/board/sifive/hifive-unleashed/genimage_sdcard.cfg b/board/sifive/hifive-unleashed/genimage_sdcard.cfg
index e66f221d73..1e0c800153 100644
--- a/board/sifive/hifive-unleashed/genimage_sdcard.cfg
+++ b/board/sifive/hifive-unleashed/genimage_sdcard.cfg
@@ -17,7 +17,6 @@ image sdcard.img {
partition rootfs {
image = "rootfs.ext4"
- partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
bootable = true
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 15/16] board/sifive/hifive-unleashed/genimage_sdcard: add comments to particular partition-type-uuid parameters
2022-02-13 22:54 ` [Buildroot] [PATCH v2 14/16] board/sifive/hifive-unleashed/genimage_sdcard: remove partition-type-uuid since its default value is L(rootfs) Giulio Benetti
@ 2022-02-13 22:54 ` Giulio Benetti
2022-02-13 22:54 ` [Buildroot] [PATCH v2 16/16] board/sifive/hifive-unleashed/genimage_spi-nor: " Giulio Benetti
1 sibling, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:54 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/sifive/hifive-unleashed/genimage_sdcard.cfg | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/sifive/hifive-unleashed/genimage_sdcard.cfg b/board/sifive/hifive-unleashed/genimage_sdcard.cfg
index 1e0c800153..e5618fa4c1 100644
--- a/board/sifive/hifive-unleashed/genimage_sdcard.cfg
+++ b/board/sifive/hifive-unleashed/genimage_sdcard.cfg
@@ -6,12 +6,14 @@ image sdcard.img {
partition u-boot-spl {
image = "u-boot-spl.bin"
offset = 17K
+ # ZSBL only loads from this type of partition type uuid
partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47
}
partition u-boot {
image = "u-boot.itb"
offset = 1041K
+ # U-Boot expects exactly this partition type uuid
partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH v2 16/16] board/sifive/hifive-unleashed/genimage_spi-nor: add comments to particular partition-type-uuid parameters
2022-02-13 22:54 ` [Buildroot] [PATCH v2 14/16] board/sifive/hifive-unleashed/genimage_sdcard: remove partition-type-uuid since its default value is L(rootfs) Giulio Benetti
2022-02-13 22:54 ` [Buildroot] [PATCH v2 15/16] board/sifive/hifive-unleashed/genimage_sdcard: add comments to particular partition-type-uuid parameters Giulio Benetti
@ 2022-02-13 22:54 ` Giulio Benetti
1 sibling, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-13 22:54 UTC (permalink / raw)
To: buildroot
Cc: Alistair Francis, Giulio Benetti, Sergey Matyukevich,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Suniel Mahesh,
Romain Naour, Yann E . MORIN
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/sifive/hifive-unleashed/genimage_spi-nor.cfg | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/sifive/hifive-unleashed/genimage_spi-nor.cfg b/board/sifive/hifive-unleashed/genimage_spi-nor.cfg
index 903e675a90..f5e8f188e3 100644
--- a/board/sifive/hifive-unleashed/genimage_spi-nor.cfg
+++ b/board/sifive/hifive-unleashed/genimage_spi-nor.cfg
@@ -8,12 +8,14 @@ image spi-nor.img {
partition u-boot-spl {
image = "u-boot-spl.bin"
offset = 20K
+ # ZSBL only loads from this type of partition type uuid
partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47
}
partition u-boot {
image = "u-boot.itb"
offset = 1044K
+ # U-Boot expects exactly this partition type uuid
partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [Buildroot] [PATCH 02/16] board/beaglev/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 03/16] board/friendlyarm/nanopc-t4/genimage: " Giulio Benetti
` (13 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/beaglev/genimage.cfg | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/beaglev/genimage.cfg b/board/beaglev/genimage.cfg
index deefdbc110..54f9118ea9 100644
--- a/board/beaglev/genimage.cfg
+++ b/board/beaglev/genimage.cfg
@@ -4,7 +4,7 @@ image sdcard.img {
}
partition rootfs {
- partition-type-uuid = 72ec70a6-cf74-40e6-bd49-4bda08e8f224
+ partition-type-uuid = L
partition-uuid = 0fef845a-c6e1-45bc-82f7-002fa720f958
bootable = "true"
image = "rootfs.ext4"
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 03/16] board/friendlyarm/nanopc-t4/genimage: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 01/16] board/aarch64-efi/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 02/16] board/beaglev/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 04/16] board/friendlyarm/nanopi-m4/genimage: keep partition-type-uuid without "" for consistency Giulio Benetti
` (12 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/friendlyarm/nanopc-t4/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/friendlyarm/nanopc-t4/genimage.cfg b/board/friendlyarm/nanopc-t4/genimage.cfg
index 98dc2f3892..272037c9f7 100644
--- a/board/friendlyarm/nanopc-t4/genimage.cfg
+++ b/board/friendlyarm/nanopc-t4/genimage.cfg
@@ -26,14 +26,14 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
+ partition-type-uuid = L
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 04/16] board/friendlyarm/nanopi-m4/genimage: keep partition-type-uuid without "" for consistency
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (2 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 03/16] board/friendlyarm/nanopc-t4/genimage: " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 05/16] board/orangepi/orangepi-pc-plus/genimage: " Giulio Benetti
` (11 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/friendlyarm/nanopi-m4/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/friendlyarm/nanopi-m4/genimage.cfg b/board/friendlyarm/nanopi-m4/genimage.cfg
index 8d0e6ad13b..655981847e 100644
--- a/board/friendlyarm/nanopi-m4/genimage.cfg
+++ b/board/friendlyarm/nanopi-m4/genimage.cfg
@@ -26,14 +26,14 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
+ partition-type-uuid = L
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 05/16] board/orangepi/orangepi-pc-plus/genimage: keep partition-type-uuid without "" for consistency
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (3 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 04/16] board/friendlyarm/nanopi-m4/genimage: keep partition-type-uuid without "" for consistency Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 06/16] board/orangepi/orangepi-r1/genimage: fix partition-type-uuid for boot partition and remove " Giulio Benetti
` (10 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/orangepi/orangepi-pc-plus/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/orangepi/orangepi-pc-plus/genimage.cfg b/board/orangepi/orangepi-pc-plus/genimage.cfg
index 3812d785d5..d94239e9a2 100644
--- a/board/orangepi/orangepi-pc-plus/genimage.cfg
+++ b/board/orangepi/orangepi-pc-plus/genimage.cfg
@@ -28,7 +28,7 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = "F"
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
}
@@ -36,7 +36,7 @@ image sdcard.img {
# 'rootfs' will be used as the partition label, used
# with root=PARTLABEL=rootfs kernel command line
partition rootfs {
- partition-type-uuid = "L"
+ partition-type-uuid = L
image = "rootfs.ext4"
size = 512M
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 06/16] board/orangepi/orangepi-r1/genimage: fix partition-type-uuid for boot partition and remove "" for consistency
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (4 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 05/16] board/orangepi/orangepi-pc-plus/genimage: " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 07/16] board/orangepi/orangepi-zero-plus2/genimage: keep partition-type-uuid without " Giulio Benetti
` (9 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/orangepi/orangepi-r1/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/orangepi/orangepi-r1/genimage.cfg b/board/orangepi/orangepi-r1/genimage.cfg
index e93e802bd9..78b69269b7 100644
--- a/board/orangepi/orangepi-r1/genimage.cfg
+++ b/board/orangepi/orangepi-r1/genimage.cfg
@@ -28,7 +28,7 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = "U"
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
}
@@ -36,7 +36,7 @@ image sdcard.img {
# 'rootfs' will be used as the partition label, used
# with root=PARTLABEL=rootfs kernel command line
partition rootfs {
- partition-type-uuid = "L"
+ partition-type-uuid = L
image = "rootfs.ext4"
size = 512M
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 07/16] board/orangepi/orangepi-zero-plus2/genimage: keep partition-type-uuid without "" for consistency
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (5 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 06/16] board/orangepi/orangepi-r1/genimage: fix partition-type-uuid for boot partition and remove " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 08/16] board/pc/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
` (8 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/orangepi/orangepi-zero-plus2/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/orangepi/orangepi-zero-plus2/genimage.cfg b/board/orangepi/orangepi-zero-plus2/genimage.cfg
index 5a7ee7707a..9538e6a54e 100644
--- a/board/orangepi/orangepi-zero-plus2/genimage.cfg
+++ b/board/orangepi/orangepi-zero-plus2/genimage.cfg
@@ -26,7 +26,7 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = "F"
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
}
@@ -34,7 +34,7 @@ image sdcard.img {
# 'rootfs' will be used as the partition label, used
# with root=PARTLABEL=rootfs kernel command line
partition rootfs {
- partition-type-uuid = "L"
+ partition-type-uuid = L
image = "rootfs.ext4"
size = 256M
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 08/16] board/pc/genimage-efi: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (6 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 07/16] board/orangepi/orangepi-zero-plus2/genimage: keep partition-type-uuid without " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 09/16] board/pine64/rockpro64/genimage: " Giulio Benetti
` (7 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/pc/genimage-efi.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/pc/genimage-efi.cfg b/board/pc/genimage-efi.cfg
index 035a077a78..9626a5f2e7 100644
--- a/board/pc/genimage-efi.cfg
+++ b/board/pc/genimage-efi.cfg
@@ -19,13 +19,13 @@ image disk.img {
partition boot {
image = "efi-part.vfat"
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = U
offset = 32K
bootable = true
}
partition root {
- partition-type-uuid = 44479540-f297-41b2-9af7-d131d5f0458a
+ partition-type-uuid = L
partition-uuid = UUID_TMP
image = "rootfs.ext2"
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 09/16] board/pine64/rockpro64/genimage: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (7 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 08/16] board/pc/genimage-efi: convert partition-type-uuid to single letter notation Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 10/16] board/qemu/aarch64-sbsa/genimage: " Giulio Benetti
` (6 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/pine64/rockpro64/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/pine64/rockpro64/genimage.cfg b/board/pine64/rockpro64/genimage.cfg
index d3926f2df6..4b96a3447d 100644
--- a/board/pine64/rockpro64/genimage.cfg
+++ b/board/pine64/rockpro64/genimage.cfg
@@ -26,14 +26,14 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
+ partition-type-uuid = L
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 10/16] board/qemu/aarch64-sbsa/genimage: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (8 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 09/16] board/pine64/rockpro64/genimage: " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 11/16] board/radxa/rockpi-n4/genimage: " Giulio Benetti
` (5 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/qemu/aarch64-sbsa/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/qemu/aarch64-sbsa/genimage.cfg b/board/qemu/aarch64-sbsa/genimage.cfg
index bdf8a89d75..629f4e07b7 100644
--- a/board/qemu/aarch64-sbsa/genimage.cfg
+++ b/board/qemu/aarch64-sbsa/genimage.cfg
@@ -19,13 +19,13 @@ image disk.img {
partition boot {
image = "efi-part.vfat"
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = U
offset = 32K
bootable = true
}
partition root {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
+ partition-type-uuid = L
image = "rootfs.ext2"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 11/16] board/radxa/rockpi-n4/genimage: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (9 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 10/16] board/qemu/aarch64-sbsa/genimage: " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 12/16] board/radxa/rockpi-n10/genimage: " Giulio Benetti
` (4 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/radxa/rockpi-4/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/radxa/rockpi-4/genimage.cfg b/board/radxa/rockpi-4/genimage.cfg
index 68cc4d61a8..3c3bd8b7fc 100644
--- a/board/radxa/rockpi-4/genimage.cfg
+++ b/board/radxa/rockpi-4/genimage.cfg
@@ -26,14 +26,14 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
+ partition-type-uuid = L
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 12/16] board/radxa/rockpi-n10/genimage: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (10 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 11/16] board/radxa/rockpi-n4/genimage: " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 13/16] board/radxa/rockpi-n8/genimage: " Giulio Benetti
` (3 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/radxa/rockpi-n10/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/radxa/rockpi-n10/genimage.cfg b/board/radxa/rockpi-n10/genimage.cfg
index 7f4b639bbc..2773658330 100644
--- a/board/radxa/rockpi-n10/genimage.cfg
+++ b/board/radxa/rockpi-n10/genimage.cfg
@@ -26,14 +26,14 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
+ partition-type-uuid = L
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 13/16] board/radxa/rockpi-n8/genimage: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (11 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 12/16] board/radxa/rockpi-n10/genimage: " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 14/16] board/sifive/hifive-unleashed/genimage_sdcard: " Giulio Benetti
` (2 subsequent siblings)
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/radxa/rockpi-n8/genimage.cfg | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/radxa/rockpi-n8/genimage.cfg b/board/radxa/rockpi-n8/genimage.cfg
index 909a646499..3fced4a5d8 100644
--- a/board/radxa/rockpi-n8/genimage.cfg
+++ b/board/radxa/rockpi-n8/genimage.cfg
@@ -26,14 +26,14 @@ image sdcard.img {
}
partition boot {
- partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+ partition-type-uuid = F
bootable = "true"
image = "boot.vfat"
offset = 16M
}
partition rootfs {
- partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3
+ partition-type-uuid = L
image = "rootfs.ext4"
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 14/16] board/sifive/hifive-unleashed/genimage_sdcard: convert partition-type-uuid to single letter notation
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (12 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 13/16] board/radxa/rockpi-n8/genimage: " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-02-06 20:05 ` [Buildroot] [PATCH 15/16] board/sifive/hifive-unleashed/genimage_sdcard: add comments to particular partition-type-uuid parameters Giulio Benetti
2022-07-22 20:41 ` [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Thomas Petazzoni via buildroot
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/sifive/hifive-unleashed/genimage_sdcard.cfg | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/sifive/hifive-unleashed/genimage_sdcard.cfg b/board/sifive/hifive-unleashed/genimage_sdcard.cfg
index e66f221d73..b8bd787488 100644
--- a/board/sifive/hifive-unleashed/genimage_sdcard.cfg
+++ b/board/sifive/hifive-unleashed/genimage_sdcard.cfg
@@ -17,7 +17,7 @@ image sdcard.img {
partition rootfs {
image = "rootfs.ext4"
- partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+ partition-type-uuid = L
bootable = true
}
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* [Buildroot] [PATCH 15/16] board/sifive/hifive-unleashed/genimage_sdcard: add comments to particular partition-type-uuid parameters
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (13 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 14/16] board/sifive/hifive-unleashed/genimage_sdcard: " Giulio Benetti
@ 2022-02-06 20:05 ` Giulio Benetti
2022-07-22 20:41 ` [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Thomas Petazzoni via buildroot
15 siblings, 0 replies; 39+ messages in thread
From: Giulio Benetti @ 2022-02-06 20:05 UTC (permalink / raw)
To: buildroot
Cc: Sergey Matyukevich, Alistair Francis, Suniel Mahesh,
Gerome Burlats, Jagan Teki, Thomas Petazzoni, Romain Naour,
Giulio Benetti
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
board/sifive/hifive-unleashed/genimage_sdcard.cfg | 2 ++
1 file changed, 2 insertions(+)
diff --git a/board/sifive/hifive-unleashed/genimage_sdcard.cfg b/board/sifive/hifive-unleashed/genimage_sdcard.cfg
index b8bd787488..47e59a90d7 100644
--- a/board/sifive/hifive-unleashed/genimage_sdcard.cfg
+++ b/board/sifive/hifive-unleashed/genimage_sdcard.cfg
@@ -6,12 +6,14 @@ image sdcard.img {
partition u-boot-spl {
image = "u-boot-spl.bin"
offset = 17K
+ # ZSBL only loads from this type of partition type uuid
partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47
}
partition u-boot {
image = "u-boot.itb"
offset = 1041K
+ # U-Boot expects exactly this partition type uuid
partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985
}
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 39+ messages in thread* Re: [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid
2022-02-06 20:05 [Buildroot] [PATCH 00/16] Use single letter notation in genimage.cfg files for partition-type-uuid Giulio Benetti
` (14 preceding siblings ...)
2022-02-06 20:05 ` [Buildroot] [PATCH 15/16] board/sifive/hifive-unleashed/genimage_sdcard: add comments to particular partition-type-uuid parameters Giulio Benetti
@ 2022-07-22 20:41 ` Thomas Petazzoni via buildroot
15 siblings, 0 replies; 39+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-07-22 20:41 UTC (permalink / raw)
To: Giulio Benetti
Cc: Sergey Matyukevich, Alistair Francis, Gerome Burlats, Jagan Teki,
Suniel Mahesh, Romain Naour, buildroot
Hello,
On Sun, 6 Feb 2022 21:05:16 +0100
Giulio Benetti <giulio.benetti@benettiengineering.com> wrote:
> This patchset convert partition-type-uuid to single letter notation
> *without* "".
I have sent a new iteration of this series at:
https://patchwork.ozlabs.org/project/buildroot/list/?series=310888
which makes some slightly different choices, after discussion with
Arnout. Feedback welcome.
Thanks!
Thomas
--
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 39+ messages in thread