From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: "Arnout Vandecappelle (Essensium/Mind)" <arnout@mind.be>
Cc: Matt Weber <matthew.weber@collins.com>, buildroot@buildroot.org
Subject: Re: [Buildroot] [PATCH 1/5] package/gnutls: disable library search in /usr/lib
Date: Thu, 12 May 2022 22:52:32 +0200 [thread overview]
Message-ID: <20220512205232.GJ1597494@scaer> (raw)
In-Reply-To: <20220512160116.2011627-1-arnout@mind.be>
Arnout, All,
On 2022-05-12 18:01 +0200, Arnout Vandecappelle (Essensium/Mind) spake thusly:
> gnutls's configure script has a weird approach where it first searches
> for dependent libraries in the path specified by --prefix, before
> searching in the default search path. Since we set --prefix to /usr,
> and it doesn't take into account DESTDIR (which is anyway not set at
> configure time), that means it will first search /usr/lib before
> searching $(STAGING_DIR)/usr/lib.
>
> Ideally, this would be fixed in the configure script itself. However,
> the m4 file that does this is pretty complex, it's not immediately clear
> where to add $DESTDIR. In addition it comes from gnulib which is a
> somewhat annoying upstream.
>
> Therefore, instead, bypass the prefix lookup with
> --without-libfoo-prefix. Note that we could set
> --with-libfoo-prefix=$(STAGING_DIR)/usr (the latter is already done for
> librt and libpthread), but that's pretty pointless -
> --without-libfoo-prefix in fact reverts to what should have been done in
> the first place, i.e. use the toolchain search path.
>
> Add --without-libfoo-prefix for all options defined in configure (found
> with ./configure --help | grep without-.*-prefix). Most of these are
> only used in tests (e.g. libcrypto) or even not at all (e.g. libiconv),
> but it's fairly hard to discover this and to be sure that they are
> indeed not needed, so better pass all of them.
>
> Remove the now-redundant arguments for librt and libpthread.
>
> Add a comment to remind people to revisit these when bumping the
> version.
>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> Cc: Peter Korsgaard <peter@korsgaard.com>
Applied to master, thanks.
Regards,
Yann E. MORIN.
> ---
> This is for stable, but need to check if the same prefix options exist
> in 3.7.3.
> ---
> package/gnutls/gnutls.mk | 15 ++++++++++-----
> 1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk
> index 0e461cd44c..b5503b1fc9 100644
> --- a/package/gnutls/gnutls.mk
> +++ b/package/gnutls/gnutls.mk
> @@ -4,6 +4,7 @@
> #
> ################################################################################
>
> +# When bumping, make sure *all* --without-libfoo-prefix options are in GNUTLS_CONF_OPTS
> GNUTLS_VERSION_MAJOR = 3.7
> GNUTLS_VERSION = $(GNUTLS_VERSION_MAJOR).4
> GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz
> @@ -26,7 +27,15 @@ GNUTLS_CONF_OPTS = \
> --disable-tests \
> --enable-local-libopts \
> --enable-openssl-compatibility \
> - --with-librt-prefix=$(STAGING_DIR) \
> + --without-libcrypto-prefix \
> + --without-libdl-prefix \
> + --without-libev-prefix \
> + --without-libiconv-prefix \
> + --without-libintl-prefix \
> + --without-libpthread-prefix \
> + --without-libseccomp-prefix \
> + --without-librt-prefix \
> + --without-libz-prefix \
> --without-tpm \
> $(if $(BR2_PACKAGE_GNUTLS_OPENSSL),--enable,--disable)-openssl-compatibility \
> $(if $(BR2_PACKAGE_GNUTLS_TOOLS),--enable-tools,--disable-tools) \
> @@ -39,9 +48,6 @@ GNUTLS_CONF_ENV = gl_cv_socket_ipv6=yes \
> gl_cv_func_gettimeofday_clobber=no
> GNUTLS_INSTALL_STAGING = YES
>
> -# libpthread autodetection poison the linkpath
> -GNUTLS_CONF_OPTS += $(if $(BR2_TOOLCHAIN_HAS_THREADS),--with-libpthread-prefix=$(STAGING_DIR)/usr)
> -
> # gnutls needs libregex, but pcre can be used too
> # The check isn't cross-compile friendly
> GNUTLS_CONF_ENV += libopts_cv_with_libregex=yes
> @@ -70,7 +76,6 @@ GNUTLS_CONF_OPTS += --without-p11-kit
> endif
>
> ifeq ($(BR2_PACKAGE_LIBUNISTRING),y)
> -GNUTLS_CONF_OPTS += --with-libunistring-prefix=$(STAGING_DIR)/usr
> GNUTLS_DEPENDENCIES += libunistring
> else
> GNUTLS_CONF_OPTS += --with-included-unistring
> --
> 2.35.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2022-05-12 20:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 16:01 [Buildroot] [PATCH 1/5] package/gnutls: disable library search in /usr/lib Arnout Vandecappelle (Essensium/Mind)
2022-05-12 16:01 ` [Buildroot] [PATCH 2/5] package/gnutls: remove unused libregex dependency Arnout Vandecappelle (Essensium/Mind)
2022-05-12 20:52 ` Yann E. MORIN
2022-05-12 16:01 ` [Buildroot] [PATCH 3/5] package/gnutls: remove redundant --enable-openssl-compatibility Arnout Vandecappelle (Essensium/Mind)
2022-05-12 20:53 ` Yann E. MORIN
2022-05-12 16:01 ` [Buildroot] [PATCH 4/5] package/gnutls: add optional dependency on brotli, zlib, zstd Arnout Vandecappelle (Essensium/Mind)
2022-05-12 20:54 ` Yann E. MORIN
2022-05-12 16:01 ` [Buildroot] [PATCH 5/5] package/gnutls: libunistring is not optional Arnout Vandecappelle (Essensium/Mind)
2022-05-12 20:55 ` Yann E. MORIN
2022-05-12 20:52 ` Yann E. MORIN [this message]
2022-05-28 10:54 ` [Buildroot] [PATCH 1/5] package/gnutls: disable library search in /usr/lib Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220512205232.GJ1597494@scaer \
--to=yann.morin.1998@free.fr \
--cc=arnout@mind.be \
--cc=buildroot@buildroot.org \
--cc=matthew.weber@collins.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox