* [Buildroot] [PATCH v1 1/1] boot/arm-trusted-firmware: allow enabling without uboot or edk2
@ 2022-05-17 10:19 Christian Stewart via buildroot
2022-07-26 20:52 ` Thomas Petazzoni via buildroot
0 siblings, 1 reply; 2+ messages in thread
From: Christian Stewart via buildroot @ 2022-05-17 10:19 UTC (permalink / raw)
To: buildroot; +Cc: Christian Stewart, Yann E . MORIN, Thomas Petazzoni
It should be possible to compile ARM_TRUSTED_FIRMWARE without u-boot or EDK2.
For example, one might want to produce "bl31.bin" for use as an init stub for
the Raspberry Pi 4.
Signed-off-by: Christian Stewart <christian@paral.in>
---
boot/arm-trusted-firmware/Config.in | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in
index b1fc03e10b..99f8e36bb5 100644
--- a/boot/arm-trusted-firmware/Config.in
+++ b/boot/arm-trusted-firmware/Config.in
@@ -1,7 +1,6 @@
config BR2_TARGET_ARM_TRUSTED_FIRMWARE
bool "ARM Trusted Firmware (ATF)"
- depends on (BR2_ARM_CPU_ARMV8A || BR2_ARM_CPU_ARMV7A) && \
- (BR2_TARGET_UBOOT || BR2_TARGET_EDK2)
+ depends on (BR2_ARM_CPU_ARMV8A || BR2_ARM_CPU_ARMV7A)
help
Enable this option if you want to build the ATF for your ARM
based embedded device.
--
2.35.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [Buildroot] [PATCH v1 1/1] boot/arm-trusted-firmware: allow enabling without uboot or edk2
2022-05-17 10:19 [Buildroot] [PATCH v1 1/1] boot/arm-trusted-firmware: allow enabling without uboot or edk2 Christian Stewart via buildroot
@ 2022-07-26 20:52 ` Thomas Petazzoni via buildroot
0 siblings, 0 replies; 2+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-07-26 20:52 UTC (permalink / raw)
To: Christian Stewart via buildroot; +Cc: Yann E . MORIN
On Tue, 17 May 2022 03:19:12 -0700
Christian Stewart via buildroot <buildroot@buildroot.org> wrote:
> It should be possible to compile ARM_TRUSTED_FIRMWARE without u-boot or EDK2.
> For example, one might want to produce "bl31.bin" for use as an init stub for
> the Raspberry Pi 4.
>
> Signed-off-by: Christian Stewart <christian@paral.in>
> ---
> boot/arm-trusted-firmware/Config.in | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
Applied to master, thanks.
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-07-26 20:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-05-17 10:19 [Buildroot] [PATCH v1 1/1] boot/arm-trusted-firmware: allow enabling without uboot or edk2 Christian Stewart via buildroot
2022-07-26 20:52 ` Thomas Petazzoni via buildroot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox