* [Buildroot] [PATCH] support/testing/tests/init/test_systemd.py: use downloaded kernel
@ 2022-07-27 16:13 Arnout Vandecappelle (Essensium/Mind)
2022-07-27 16:14 ` Arnout Vandecappelle
0 siblings, 1 reply; 3+ messages in thread
From: Arnout Vandecappelle (Essensium/Mind) @ 2022-07-27 16:13 UTC (permalink / raw)
To: buildroot
Since systemd requires a relatively new kernel, we switched to a
self-built 4.19.204 kernel. However, since then, the downloaded kernel
used by the tests has been updated to 5.10, which is certainly recent
enough to support systemd. Switch to this one. This reduces the test
time significantly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
support/testing/tests/init/test_systemd.py | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/support/testing/tests/init/test_systemd.py b/support/testing/tests/init/test_systemd.py
index 80c6776f59..be28209ba0 100644
--- a/support/testing/tests/init/test_systemd.py
+++ b/support/testing/tests/init/test_systemd.py
@@ -11,18 +11,11 @@ class InitSystemSystemdBase(InitSystemBase):
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_SYSTEMD=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
- BR2_LINUX_KERNEL=y
- BR2_LINUX_KERNEL_CUSTOM_VERSION=y
- BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.204"
- BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
- BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="{}"
- BR2_LINUX_KERNEL_DTS_SUPPORT=y
- BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"
# BR2_TARGET_ROOTFS_TAR is not set
- """.format(infra.filepath("conf/binfmt-misc-kernel-fragment.config"))
+ """
def check_systemd(self, fs):
- self.start_emulator(fs, "zImage", "vexpress-v2p-ca9")
+ self.start_emulator(fs)
self.check_init("/lib/systemd/systemd")
# Test all units are OK
--
2.35.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [Buildroot] [PATCH] support/testing/tests/init/test_systemd.py: use downloaded kernel
2022-07-27 16:13 [Buildroot] [PATCH] support/testing/tests/init/test_systemd.py: use downloaded kernel Arnout Vandecappelle (Essensium/Mind)
@ 2022-07-27 16:14 ` Arnout Vandecappelle
2022-07-27 16:31 ` Yann E. MORIN
0 siblings, 1 reply; 3+ messages in thread
From: Arnout Vandecappelle @ 2022-07-27 16:14 UTC (permalink / raw)
To: buildroot
On 27/07/2022 18:13, Arnout Vandecappelle (Essensium/Mind) wrote:
> Since systemd requires a relatively new kernel, we switched to a
> self-built 4.19.204 kernel. However, since then, the downloaded kernel
> used by the tests has been updated to 5.10, which is certainly recent
> enough to support systemd. Switch to this one. This reduces the test
> time significantly.
>
> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
D'oh, I was waiting for the pipeline so I could add this:
---
Runtime tests: https://gitlab.com/buildroot.org/buildroot/-/pipelines/598368431
Regards,
Arnout
> ---
> support/testing/tests/init/test_systemd.py | 11 ++---------
> 1 file changed, 2 insertions(+), 9 deletions(-)
>
> diff --git a/support/testing/tests/init/test_systemd.py b/support/testing/tests/init/test_systemd.py
> index 80c6776f59..be28209ba0 100644
> --- a/support/testing/tests/init/test_systemd.py
> +++ b/support/testing/tests/init/test_systemd.py
> @@ -11,18 +11,11 @@ class InitSystemSystemdBase(InitSystemBase):
> BR2_TOOLCHAIN_EXTERNAL=y
> BR2_INIT_SYSTEMD=y
> BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
> - BR2_LINUX_KERNEL=y
> - BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> - BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.204"
> - BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
> - BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="{}"
> - BR2_LINUX_KERNEL_DTS_SUPPORT=y
> - BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"
> # BR2_TARGET_ROOTFS_TAR is not set
> - """.format(infra.filepath("conf/binfmt-misc-kernel-fragment.config"))
> + """
>
> def check_systemd(self, fs):
> - self.start_emulator(fs, "zImage", "vexpress-v2p-ca9")
> + self.start_emulator(fs)
> self.check_init("/lib/systemd/systemd")
>
> # Test all units are OK
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Buildroot] [PATCH] support/testing/tests/init/test_systemd.py: use downloaded kernel
2022-07-27 16:14 ` Arnout Vandecappelle
@ 2022-07-27 16:31 ` Yann E. MORIN
0 siblings, 0 replies; 3+ messages in thread
From: Yann E. MORIN @ 2022-07-27 16:31 UTC (permalink / raw)
To: Arnout Vandecappelle; +Cc: buildroot
Arnout, All,
On 2022-07-27 18:14 +0200, Arnout Vandecappelle spake thusly:
> On 27/07/2022 18:13, Arnout Vandecappelle (Essensium/Mind) wrote:
> >Since systemd requires a relatively new kernel, we switched to a
> >self-built 4.19.204 kernel. However, since then, the downloaded kernel
> >used by the tests has been updated to 5.10, which is certainly recent
> >enough to support systemd. Switch to this one. This reduces the test
> >time significantly.
> >
> >Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Applied to master, thanks.
> D'oh, I was waiting for the pipeline so I could add this:
> ---
> Runtime tests: https://gitlab.com/buildroot.org/buildroot/-/pipelines/598368431
Nice, thanks! Still applied to master, though! ;-]
Regards,
Yann E. MORIN.
>
> Regards,
> Arnout
>
> >---
> > support/testing/tests/init/test_systemd.py | 11 ++---------
> > 1 file changed, 2 insertions(+), 9 deletions(-)
> >
> >diff --git a/support/testing/tests/init/test_systemd.py b/support/testing/tests/init/test_systemd.py
> >index 80c6776f59..be28209ba0 100644
> >--- a/support/testing/tests/init/test_systemd.py
> >+++ b/support/testing/tests/init/test_systemd.py
> >@@ -11,18 +11,11 @@ class InitSystemSystemdBase(InitSystemBase):
> > BR2_TOOLCHAIN_EXTERNAL=y
> > BR2_INIT_SYSTEMD=y
> > BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
> >- BR2_LINUX_KERNEL=y
> >- BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> >- BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.204"
> >- BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
> >- BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="{}"
> >- BR2_LINUX_KERNEL_DTS_SUPPORT=y
> >- BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"
> > # BR2_TARGET_ROOTFS_TAR is not set
> >- """.format(infra.filepath("conf/binfmt-misc-kernel-fragment.config"))
> >+ """
> > def check_systemd(self, fs):
> >- self.start_emulator(fs, "zImage", "vexpress-v2p-ca9")
> >+ self.start_emulator(fs)
> > self.check_init("/lib/systemd/systemd")
> > # Test all units are OK
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-07-27 16:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-07-27 16:13 [Buildroot] [PATCH] support/testing/tests/init/test_systemd.py: use downloaded kernel Arnout Vandecappelle (Essensium/Mind)
2022-07-27 16:14 ` Arnout Vandecappelle
2022-07-27 16:31 ` Yann E. MORIN
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox