[Buildroot] [PATCH v2 1/2] configs/beaglebone: bump Linux version to 5.10.162-ti-r56

[Buildroot] [PATCH v2 1/2] configs/beaglebone: bump Linux version to 5.10.162-ti-r56

[Dario Binacchi]

The previous version failed to boot from sd card with a log reported by
the document [1]. In my case it always failed, a 100% failure against
75% reported by the document.

Instead of adding the patch to fix the problem, I preferred to update
the kernel version.

Tested on beaglebone black.

[1] https://forum.beagleboard.org/t/5-10-x-beaglebone-black-fails-to-boot-from-sd-card/33297
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>

---

Changes in v2:
- bump version to 5.10.162-ti-r56.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
 configs/beaglebone_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig
index 639b491e9746..3ce5721265c3 100644
--- a/configs/beaglebone_defconfig
+++ b/configs/beaglebone_defconfig
@@ -20,7 +20,7 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beaglebone/genimage.cfg"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,5.10.30-ti-r3)/linux-5.10.30-ti-r3.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,5.10.162-ti-r56)/linux-5.10.162-ti-r56.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-evm am335x-bone am335x-boneblack am335x-bonegreen am335x-evmsk am335x-boneblue am335x-boneblack-wireless am335x-bonegreen-wireless"
-- 
2.32.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH v2 1/2] configs/beaglebone: bump Linux version to 5.10.162-ti-r56

[Thomas Petazzoni via buildroot]

On Tue,  7 Feb 2023 09:21:36 +0100
Dario Binacchi <dario.binacchi@amarulasolutions.com> wrote:

> The previous version failed to boot from sd card with a log reported by
> the document [1]. In my case it always failed, a 100% failure against
> 75% reported by the document.
> 
> Instead of adding the patch to fix the problem, I preferred to update
> the kernel version.
> 
> Tested on beaglebone black.
> 
> [1] https://forum.beagleboard.org/t/5-10-x-beaglebone-black-fails-to-boot-from-sd-card/33297
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> 
> ---

Applied to master, thanks. However, when you send a v2, please always
resend the full series, otherwise it's very confusing for us on the
maintainer side to figure out where are the other patches of the same
series.

Thanks a lot!

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot