[Buildroot] [PATCH 1/1] package/speex: force arm mode instead of Thumb mode

[Buildroot] [PATCH 1/1] package/speex: force arm mode instead of Thumb mode

[Bernd Kuhls]

Fix the following build failure:

/tmp/cclxE0xY.s: Assembler messages:
/tmp/cclxE0xY.s:118: Error: cannot honor width suffix -- `smlabb r2,r0,r4,r6'
/tmp/cclxE0xY.s:134: Error: cannot honor width suffix -- `smlabb r9,r2,r2,r3'
/tmp/cclxE0xY.s:812: Error: cannot honor width suffix -- `smlabb r1,r2,r2,r6'
/tmp/cclxE0xY.s:1202: Error: cannot honor width suffix -- `smulbb r3,r0,r6'
/tmp/cclxE0xY.s:2298: Error: cannot honor width suffix -- `smulbb r3,r0,r4'
/tmp/cclxE0xY.s:3133: Error: cannot honor width suffix -- `smulbb r3,r2,r5'

Fixes:
http://autobuild.buildroot.net/results/c55/c557ca72832c942f201b4a21f913f74534857cc6/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
---
 package/speex/speex.mk | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/package/speex/speex.mk b/package/speex/speex.mk
index 6d61e93833..0bbcb2bde2 100644
--- a/package/speex/speex.mk
+++ b/package/speex/speex.mk
@@ -26,6 +26,10 @@ ifeq ($(BR2_PACKAGE_SPEEX_ARM5E),y)
 SPEEX_CONF_OPTS += --enable-arm5e-asm
 endif
 
+ifeq ($(BR2_ARM_INSTRUCTIONS_THUMB),y)
+SPEEX_CONF_ENV += CFLAGS="$(TARGET_CFLAGS) -marm"
+endif
+
 define SPEEX_LIBTOOL_FIXUP
 	$(SED) 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|g' $(@D)/libtool
 	$(SED) 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|g' $(@D)/libtool
-- 
2.39.2

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH 1/1] package/speex: force arm mode instead of Thumb mode

[Thomas Petazzoni via buildroot]

On Mon, 12 Jun 2023 18:02:04 +0200
Bernd Kuhls <bernd.kuhls@t-online.de> wrote:

> Fix the following build failure:
> 
> /tmp/cclxE0xY.s: Assembler messages:
> /tmp/cclxE0xY.s:118: Error: cannot honor width suffix -- `smlabb r2,r0,r4,r6'
> /tmp/cclxE0xY.s:134: Error: cannot honor width suffix -- `smlabb r9,r2,r2,r3'
> /tmp/cclxE0xY.s:812: Error: cannot honor width suffix -- `smlabb r1,r2,r2,r6'
> /tmp/cclxE0xY.s:1202: Error: cannot honor width suffix -- `smulbb r3,r0,r6'
> /tmp/cclxE0xY.s:2298: Error: cannot honor width suffix -- `smulbb r3,r0,r4'
> /tmp/cclxE0xY.s:3133: Error: cannot honor width suffix -- `smulbb r3,r2,r5'
> 
> Fixes:
> http://autobuild.buildroot.net/results/c55/c557ca72832c942f201b4a21f913f74534857cc6/
> 
> Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
> ---
>  package/speex/speex.mk | 4 ++++
>  1 file changed, 4 insertions(+)

Applied to master, thanks.

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

Re: [Buildroot] [PATCH 1/1] package/speex: force arm mode instead of Thumb mode

[Peter Korsgaard]

>>>>> "Bernd" == Bernd Kuhls <bernd.kuhls@t-online.de> writes:

 > Fix the following build failure:
 > /tmp/cclxE0xY.s: Assembler messages:
 > /tmp/cclxE0xY.s:118: Error: cannot honor width suffix -- `smlabb r2,r0,r4,r6'
 > /tmp/cclxE0xY.s:134: Error: cannot honor width suffix -- `smlabb r9,r2,r2,r3'
 > /tmp/cclxE0xY.s:812: Error: cannot honor width suffix -- `smlabb r1,r2,r2,r6'
 > /tmp/cclxE0xY.s:1202: Error: cannot honor width suffix -- `smulbb r3,r0,r6'
 > /tmp/cclxE0xY.s:2298: Error: cannot honor width suffix -- `smulbb r3,r0,r4'
 > /tmp/cclxE0xY.s:3133: Error: cannot honor width suffix -- `smulbb r3,r2,r5'

 > Fixes:
 > http://autobuild.buildroot.net/results/c55/c557ca72832c942f201b4a21f913f74534857cc6/

 > Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>

Committed to 2023.02.x and 2023.05.x, thanks.

-- 
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot