* [Buildroot] [PATCH v2 0/2] package/hostapd: add WNM and MBO options
@ 2026-11-20 13:00 Mattias Walström
2026-11-20 13:00 ` [Buildroot] [PATCH v2 1/2] package/hostapd: add IEEE 802.11v (WNM) support option Mattias Walström
2026-11-20 13:00 ` [Buildroot] [PATCH v2 2/2] package/hostapd: add MBO (Wi-Fi Agile Multiband) " Mattias Walström
0 siblings, 2 replies; 3+ messages in thread
From: Mattias Walström @ 2026-11-20 13:00 UTC (permalink / raw)
To: buildroot; +Cc: Mattias Walström, Sergey Matyukevich
Hi,
These two patches add options for building hostapd with WNM (IEEE
802.11v) and MBO (Wi-Fi Agile Multiband). Both are off by default.
v1 [1] was a single patch with both options. Now WNM is its own patch,
since it can be used without MBO. I can squash them back if that is
preferred.
I'm not sure about the select of WNM from MBO. hostapd builds MBO fine
without it. I added it because MBO uses BSS transition management from
WNM. I can drop it.
Build tested with utils/test-pkg.
Changes v1 -> v2:
- split the WNM option into its own patch
- rebased on master, no code changes
[1] https://lore.kernel.org/buildroot/20260604132228.2977562-1-lazzer@gmail.com/
Mattias Walström (2):
package/hostapd: add IEEE 802.11v (WNM) support option
package/hostapd: add MBO (Wi-Fi Agile Multiband) support option
package/hostapd/Config.in | 19 +++++++++++++++++++
package/hostapd/hostapd.mk | 8 ++++++++
2 files changed, 27 insertions(+)
--
2.43.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH v2 1/2] package/hostapd: add IEEE 802.11v (WNM) support option
2026-11-20 13:00 [Buildroot] [PATCH v2 0/2] package/hostapd: add WNM and MBO options Mattias Walström
@ 2026-11-20 13:00 ` Mattias Walström
2026-11-20 13:00 ` [Buildroot] [PATCH v2 2/2] package/hostapd: add MBO (Wi-Fi Agile Multiband) " Mattias Walström
1 sibling, 0 replies; 3+ messages in thread
From: Mattias Walström @ 2026-11-20 13:00 UTC (permalink / raw)
To: buildroot; +Cc: Mattias Walström, Sergey Matyukevich
Add BR2_PACKAGE_HOSTAPD_WNM to enable Wireless Network Management
(IEEE 802.11v) on the AP side, including BSS Transition Management
for assisted roaming.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
---
Changes v1 -> v2:
- new patch, split out of the MBO patch
---
package/hostapd/Config.in | 9 +++++++++
package/hostapd/hostapd.mk | 4 ++++
2 files changed, 13 insertions(+)
diff --git a/package/hostapd/Config.in b/package/hostapd/Config.in
index 40747a4e62..5d08f15ff8 100644
--- a/package/hostapd/Config.in
+++ b/package/hostapd/Config.in
@@ -75,6 +75,15 @@ config BR2_PACKAGE_HOSTAPD_WPA3
help
Enable WPA3 support including OWE, SAE, DPP
+config BR2_PACKAGE_HOSTAPD_WNM
+ bool "Enable WNM (Wireless Network Management)"
+ depends on BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS
+ help
+ Enable support for Wireless Network Management (IEEE 802.11v)
+ on the AP side. This enables features such as BSS Transition
+ Management which allows the AP to suggest or request a station
+ to move to another BSS.
+
config BR2_PACKAGE_HOSTAPD_VLAN
bool "Enable VLAN support"
default y
diff --git a/package/hostapd/hostapd.mk b/package/hostapd/hostapd.mk
index d673c84587..d9a1660842 100644
--- a/package/hostapd/hostapd.mk
+++ b/package/hostapd/hostapd.mk
@@ -93,6 +93,10 @@ HOSTAPD_CONFIG_DISABLE += \
CONFIG_OWE
endif
+ifeq ($(BR2_PACKAGE_HOSTAPD_WNM),y)
+HOSTAPD_CONFIG_ENABLE += CONFIG_WNM
+endif
+
ifeq ($(BR2_PACKAGE_HOSTAPD_VLAN),)
HOSTAPD_CONFIG_ENABLE += CONFIG_NO_VLAN
endif
--
2.43.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH v2 2/2] package/hostapd: add MBO (Wi-Fi Agile Multiband) support option
2026-11-20 13:00 [Buildroot] [PATCH v2 0/2] package/hostapd: add WNM and MBO options Mattias Walström
2026-11-20 13:00 ` [Buildroot] [PATCH v2 1/2] package/hostapd: add IEEE 802.11v (WNM) support option Mattias Walström
@ 2026-11-20 13:00 ` Mattias Walström
1 sibling, 0 replies; 3+ messages in thread
From: Mattias Walström @ 2026-11-20 13:00 UTC (permalink / raw)
To: buildroot; +Cc: Mattias Walström, Sergey Matyukevich
Add BR2_PACKAGE_HOSTAPD_MBO to enable Multiband Operation (Wi-Fi
Agile Multiband) on the AP side, providing standardized hints that
help clients pick the best frequency band and BSS.
MBO builds on WNM (IEEE 802.11v), so BR2_PACKAGE_HOSTAPD_WNM is
selected automatically.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
---
Changes v1 -> v2:
- WNM option moved to its own patch
- rebased on master, no code changes
---
package/hostapd/Config.in | 10 ++++++++++
package/hostapd/hostapd.mk | 4 ++++
2 files changed, 14 insertions(+)
diff --git a/package/hostapd/Config.in b/package/hostapd/Config.in
index 5d08f15ff8..bcca2eeae7 100644
--- a/package/hostapd/Config.in
+++ b/package/hostapd/Config.in
@@ -84,6 +84,16 @@ config BR2_PACKAGE_HOSTAPD_WNM
Management which allows the AP to suggest or request a station
to move to another BSS.
+config BR2_PACKAGE_HOSTAPD_MBO
+ bool "Enable MBO (Multiband Operation)"
+ depends on BR2_PACKAGE_HOSTAPD_HAS_WIFI_DRIVERS
+ select BR2_PACKAGE_HOSTAPD_WNM
+ help
+ Enable support for MBO (Multiband Operation, Wi-Fi Agile
+ Multiband). This facilitates efficient use of the frequency
+ bands available to the AP, enabling band steering of stations
+ toward the most suitable band.
+
config BR2_PACKAGE_HOSTAPD_VLAN
bool "Enable VLAN support"
default y
diff --git a/package/hostapd/hostapd.mk b/package/hostapd/hostapd.mk
index d9a1660842..562dd6ceb0 100644
--- a/package/hostapd/hostapd.mk
+++ b/package/hostapd/hostapd.mk
@@ -97,6 +97,10 @@ ifeq ($(BR2_PACKAGE_HOSTAPD_WNM),y)
HOSTAPD_CONFIG_ENABLE += CONFIG_WNM
endif
+ifeq ($(BR2_PACKAGE_HOSTAPD_MBO),y)
+HOSTAPD_CONFIG_ENABLE += CONFIG_MBO
+endif
+
ifeq ($(BR2_PACKAGE_HOSTAPD_VLAN),)
HOSTAPD_CONFIG_ENABLE += CONFIG_NO_VLAN
endif
--
2.43.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-11-20 13:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-20 13:00 [Buildroot] [PATCH v2 0/2] package/hostapd: add WNM and MBO options Mattias Walström
2026-11-20 13:00 ` [Buildroot] [PATCH v2 1/2] package/hostapd: add IEEE 802.11v (WNM) support option Mattias Walström
2026-11-20 13:00 ` [Buildroot] [PATCH v2 2/2] package/hostapd: add MBO (Wi-Fi Agile Multiband) " Mattias Walström
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox