Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] libtool: Version mismatch error
@ 2011-10-24 15:36 marco_cantu_ranzani at libero.it
  0 siblings, 0 replies; 3+ messages in thread
From: marco_cantu_ranzani at libero.it @ 2011-10-24 15:36 UTC (permalink / raw)
  To: buildroot

./libtool: line 1300: func_opt_split: command not found
libtool: Version mismatch error.  This is libtool 2.2.10, but the
libtool: definition of this LT_INIT comes from an older release.
libtool: You should recreate aclocal.m4 with macros from libtool 2.2.10

The same problem but while compiling PTH 2.0.7

Anyone?

^ permalink raw reply	[flat|nested] 3+ messages in thread
* [Buildroot] libtool: Version mismatch error
@ 2011-05-03 14:33 rpbainjr at yahoo.com
  2011-10-24 15:53 ` ilranzani
  0 siblings, 1 reply; 3+ messages in thread
From: rpbainjr at yahoo.com @ 2011-05-03 14:33 UTC (permalink / raw)
  To: buildroot


Any,

I am trying to migrate from buildroot-2009.08 to buildroot-2011.02 for arm.

In a few packages such as tslib and pkg-config (glib) I am getting build errors with message 

../libtool: line 476: CDPATH: command not found
../libtool: line 476: CDPATH: command not found
../libtool: line 1300: func_opt_split: command not found
libtool: Version mismatch error.  This is libtool 2.2.10, but the
libtool: definition of this LT_INIT comes from an older release.
libtool: You should recreate aclocal.m4 with macros from libtool 2.2.10
libtool: and run autoconf again.

I am running Ubuntu 10.10 and tried 11.04 also.

Any suggestions?

Thanks

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2011-10-24 15:53 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-24 15:36 [Buildroot] libtool: Version mismatch error marco_cantu_ranzani at libero.it
  -- strict thread matches above, loose matches on Subject: below --
2011-05-03 14:33 rpbainjr at yahoo.com
2011-10-24 15:53 ` ilranzani

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox