* [Buildroot] [buildroot 0001417]: Busybox compiled but not working on SH3
@ 2007-07-02 16:13 bugs at busybox.net
0 siblings, 0 replies; 2+ messages in thread
From: bugs at busybox.net @ 2007-07-02 16:13 UTC (permalink / raw)
To: buildroot
The following issue has been SUBMITTED.
======================================================================
http://busybox.net/bugs/view.php?id=1417
======================================================================
Reported By: joshash
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1417
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 07-02-2007 09:13 PDT
Last Modified: 07-02-2007 09:13 PDT
======================================================================
Summary: Busybox compiled but not working on SH3
Description:
I am using buildroot-20070615.tar.bz2 with combination of uclibc-0.9.29 ,
binutils-2.17 , busybox-1.6.0 and gcc-4.2.0.
I made the following changes :
1. During compilation, I had to change a line in
toolchain/gcc/gcc-uclibc-3.x.mk
Patch is attached. This is not the best that can be done, but it works
for me.
2. I had to add libgcc_s.so* libraries in the root file system manually.
The current situation is, the toolchain is built and I can compile and run
simple "Hello world!" like programs dynamically. But, the busybox does not
start and give any command prompt on serial console or tty0.
It gives the message like "Please press Enter to activate this console".
After pressing Enter's, same message appears again and again.
One more problem is, I can get login prompt on tty2 or so, but I cannot
login. I cannot configure the user and respective passwords coz I dont
have any command prompt to do so.
One more thing. The simple application has Flags=0x2,sh2 whereas the
busybox gets built with Flags=0x16.
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
07-02-07 09:13 joshash New Issue
07-02-07 09:13 joshash Status new => assigned
07-02-07 09:13 joshash Assigned To => buildroot
07-02-07 09:13 joshash File Added: gcc-uclibc-mk.patch
======================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Buildroot] [buildroot 0001417]: Busybox compiled but not working on SH3
@ 2007-07-07 18:56 bugs at busybox.net
0 siblings, 0 replies; 2+ messages in thread
From: bugs at busybox.net @ 2007-07-07 18:56 UTC (permalink / raw)
To: buildroot
The following issue has been CLOSED
======================================================================
http://busybox.net/bugs/view.php?id=1417
======================================================================
Reported By: joshash
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1417
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: closed
Resolution: open
Fixed in Version:
======================================================================
Date Submitted: 07-02-2007 09:13 PDT
Last Modified: 07-07-2007 11:56 PDT
======================================================================
Summary: Busybox compiled but not working on SH3
Description:
I am using buildroot-20070615.tar.bz2 with combination of uclibc-0.9.29 ,
binutils-2.17 , busybox-1.6.0 and gcc-4.2.0.
I made the following changes :
1. During compilation, I had to change a line in
toolchain/gcc/gcc-uclibc-3.x.mk
Patch is attached. This is not the best that can be done, but it works
for me.
2. I had to add libgcc_s.so* libraries in the root file system manually.
The current situation is, the toolchain is built and I can compile and run
simple "Hello world!" like programs dynamically. But, the busybox does not
start and give any command prompt on serial console or tty0.
It gives the message like "Please press Enter to activate this console".
After pressing Enter's, same message appears again and again.
One more problem is, I can get login prompt on tty2 or so, but I cannot
login. I cannot configure the user and respective passwords coz I dont
have any command prompt to do so.
One more thing. The simple application has Flags=0x2,sh2 whereas the
busybox gets built with Flags=0x16.
======================================================================
----------------------------------------------------------------------
bernhardf - 07-07-07 11:56
----------------------------------------------------------------------
> I am using buildroot-20070615.tar.bz2
I do not see this in current svn (i.e. we strip * here).
Issue History
Date Modified Username Field Change
======================================================================
07-02-07 09:13 joshash New Issue
07-02-07 09:13 joshash Status new => assigned
07-02-07 09:13 joshash Assigned To => buildroot
07-02-07 09:13 joshash File Added: gcc-uclibc-mk.patch
07-07-07 11:56 bernhardf Status assigned => closed
07-07-07 11:56 bernhardf Note Added: 0002561
======================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-07-07 18:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-02 16:13 [Buildroot] [buildroot 0001417]: Busybox compiled but not working on SH3 bugs at busybox.net
-- strict thread matches above, loose matches on Subject: below --
2007-07-07 18:56 bugs at busybox.net
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox