[Buildroot] svn At revision 20289 breakage

[Buildroot] svn At revision 20289 breakage

[Babarovic Ivica]

Hi!



$ make all

Checking build system dependencies:
BUILDROOT_DL_DIR clean:                         Ok
CC clean:                                       Ok
CXX clean:                                      Ok
CPP clean:                                      Ok
CFLAGS clean:                                   Ok
INCLUDES clean:                                 Ok
CXXFLAGS clean:                                 Ok
which installed:                                Ok
sed works:                                      Ok (/usr/bin/sed)
GNU make version '3.81':                        Ok
C compiler '/usr/bin/gcc'
C compiler version '4.1.1':                     Ok
C++ compiler '/usr/bin/g++'
C++ compiler version '4.1.1':                   Ok
bison installed:                                Ok
flex installed:                                 Ok
gettext installed:                              Ok
makeinfo installed:                             Ok
Build system dependencies:                      Ok

rm -rf 
/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/buildroot-config
mkdir -p 
/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32
cp -dpRf package/config/buildroot-config 
/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/buildroot-config
cp -dpf  
/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.config
cp: missing destination file operand after 
`/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.config'
Try `cp --help' for more information.
make: *** 
[/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.configured] 
Error 1

[Buildroot] svn At revision 20289 breakage

[Ulf Samuelsson]

>> rm -rf
>> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/buildroot-config
>> mkdir -p
>> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32
>> cp -dpRf package/config/buildroot-config
>> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/buildroot-config
>> cp -dpf
>> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.config
>> cp: missing destination file operand after
>> `/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.config'
>> Try `cp --help' for more information.
>> make: ***
>> [/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.configured]
>> Error 1
>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at uclibc.org
>> http://busybox.net/mailman/listinfo/buildroot
>
> Yes, I have the same error:
>
> rm -rf /opt/buildroot/project_build_arm/uclibc/buildroot-config
> mkdir -p /opt/buildroot/project_build_arm/uclibc
> cp -dpRf package/config/buildroot-config 
> /opt/buildroot/project_build_arm/uclibc/buildroot-config
> cp -dpf  /opt/buildroot/project_build_arm/uclibc/linux-2.6.22.10/.config
> cp: missing destination file operand after 
> `/opt/buildroot/project_build_arm/uclibc/linux-2.6.22.10/.config'
> Try `cp --help' for more information.
> make: *** 
> [/opt/buildroot/project_build_arm/uclibc/linux-2.6.22.10/.configured] 
> Error 1
>
>

Key question:

What does

$ cp a

do?

Best Regards
Ulf Samuelsson 

[Buildroot] svn At revision 20289 breakage

[Ulf Samuelsson]

>>
>> Key question:
>>
>> What does
>>
>> $ cp a
>>
>> do?
>>
>> Best Regards
>> Ulf Samuelsson
>>
>
> target/linux/Makefile.in : line 148
>
> $(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
>        cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
>        $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
>
>
> and LINUX26_KCONFIG is "" because BR2_PACKAGE_LINUX_KCONFIG=""
>
>

Gotcha!

> BR,
> Ivan
>


Best Regards
Ulf Samuelsson                ulf at atmel.com
Atmel Nordic AB
Mail:  Box 2033, 174 02 Sundbyberg, Sweden
Visit:  Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22     Fax +46 (8) 441 54 29
GSM    +46 (706) 22 44 57 

[Buildroot] svn At revision 20289 breakage

[Ulf Samuelsson]

>>
>> Key question:
>>
>> What does
>>
>> $ cp a
>>
>> do?
>>
>> Best Regards
>> Ulf Samuelsson
>>
>
> target/linux/Makefile.in : line 148
>
> $(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
>        cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
>        $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
>
>
> and LINUX26_KCONFIG is "" because BR2_PACKAGE_LINUX_KCONFIG=""
>
>

Gotcha!

Why not try the "Advanced Linux configuration" recently added
This should allow you to do "make xconfig" to create the needed file.


> BR,
> Ivan
>


Best Regards
Ulf Samuelsson

[Buildroot] svn At revision 20289 breakage

[Ivan Kuten]

> 
> rm -rf 
> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/buildroot-config
> mkdir -p 
> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32
> cp -dpRf package/config/buildroot-config 
> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/buildroot-config
> cp -dpf  
> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.config
> cp: missing destination file operand after 
> `/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.config'
> Try `cp --help' for more information.
> make: *** 
> [/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.configured] 
> Error 1
> 
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot

Yes, I have the same error:

rm -rf /opt/buildroot/project_build_arm/uclibc/buildroot-config
mkdir -p /opt/buildroot/project_build_arm/uclibc
cp -dpRf package/config/buildroot-config /opt/buildroot/project_build_arm/uclibc/buildroot-config
cp -dpf  /opt/buildroot/project_build_arm/uclibc/linux-2.6.22.10/.config
cp: missing destination file operand after `/opt/buildroot/project_build_arm/uclibc/linux-2.6.22.10/.config'
Try `cp --help' for more information.
make: *** [/opt/buildroot/project_build_arm/uclibc/linux-2.6.22.10/.configured] Error 1


Best regards,
Ivan
--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------

[Buildroot] svn At revision 20289 breakage

[Ivan Kuten]

Ulf Samuelsson wrote:
>>> rm -rf
>>> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/buildroot-config
>>> mkdir -p
>>> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32
>>> cp -dpRf package/config/buildroot-config
>>> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/buildroot-config
>>> cp -dpf
>>> /home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.config
>>> cp: missing destination file operand after
>>> `/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.config'
>>> Try `cp --help' for more information.
>>> make: ***
>>> [/home/ivo/src/mpc5200_binar/build-tools/buildroot/project_build_powerpc/cpu32/linux-2.6.22.10/.configured]
>>> Error 1
>>>
>>> _______________________________________________
>>> buildroot mailing list
>>> buildroot at uclibc.org
>>> http://busybox.net/mailman/listinfo/buildroot
>> Yes, I have the same error:
>>
>> rm -rf /opt/buildroot/project_build_arm/uclibc/buildroot-config
>> mkdir -p /opt/buildroot/project_build_arm/uclibc
>> cp -dpRf package/config/buildroot-config 
>> /opt/buildroot/project_build_arm/uclibc/buildroot-config
>> cp -dpf  /opt/buildroot/project_build_arm/uclibc/linux-2.6.22.10/.config
>> cp: missing destination file operand after 
>> `/opt/buildroot/project_build_arm/uclibc/linux-2.6.22.10/.config'
>> Try `cp --help' for more information.
>> make: *** 
>> [/opt/buildroot/project_build_arm/uclibc/linux-2.6.22.10/.configured] 
>> Error 1
>>
>>
> 
> Key question:
> 
> What does
> 
> $ cp a
> 
> do?
> 
> Best Regards
> Ulf Samuelsson 
> 

target/linux/Makefile.in : line 148

$(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
        cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
        $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config


and LINUX26_KCONFIG is "" because BR2_PACKAGE_LINUX_KCONFIG=""


BR,
Ivan

--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------

[Buildroot] svn At revision 20289 breakage

[Ivan Kuten]

Ulf Samuelsson wrote:
>>> Key question:
>>>
>>> What does
>>>
>>> $ cp a
>>>
>>> do?
>>>
>>> Best Regards
>>> Ulf Samuelsson
>>>
>> target/linux/Makefile.in : line 148
>>
>> $(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
>>        cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
>>        $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
>>
>>
>> and LINUX26_KCONFIG is "" because BR2_PACKAGE_LINUX_KCONFIG=""
>>
>>
> 
> Gotcha!
> 
> Why not try the "Advanced Linux configuration" recently added
> This should allow you to do "make xconfig" to create the needed file.
> 
> 
>> BR,
>> Ivan
>>
> 
> 
> Best Regards
> Ulf Samuelsson
> 

That's because I have generic arm .config:

BR2_arm=y
BR2_arm920t=y

BR2_ARM_TYPE="ARM920T"
# BR2_ARM_OABI is not set
BR2_ARM_EABI=y
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="arm920t"

BR2_KERNEL_HEADERS_2_6_22=y
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="2.6.22.9"

# BR2_KERNEL_none is not set
BR2_KERNEL_LINUX=y
# BR2_KERNEL_HURD is not set
# BR2_PACKAGE_LINUX is not set

And it was always building OK without any creation of .config for kernel.
Seems some defconfig for arm920t was broken/changed.


BR,
Ivan
--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------

[Buildroot] svn At revision 20289 breakage

[Babarovic Ivica]

Ulf Samuelsson wrote:
>>>
>>> Key question:
>>>
>>> What does
>>>
>>> $ cp a
>>>
>>> do?
>>>
>>> Best Regards
>>> Ulf Samuelsson
>>>
>>
>> target/linux/Makefile.in : line 148
>>
>> $(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
>>        cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
>>        $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
>>
>>
>> and LINUX26_KCONFIG is "" because BR2_PACKAGE_LINUX_KCONFIG=""
>>
>>
>
> Gotcha!
>
> Why not try the "Advanced Linux configuration" recently added
> This should allow you to do "make xconfig" to create the needed file.
>
Wait! so we should now include our kernel .config files in buildroot 
build process?
If so Why?

BR,
I.

[Buildroot] svn At revision 20289 breakage

[Babarovic Ivica]

Babarovic Ivica wrote:
> Ulf Samuelsson wrote:
>   
>>>> Key question:
>>>>
>>>> What does
>>>>
>>>> $ cp a
>>>>
>>>> do?
>>>>
>>>> Best Regards
>>>> Ulf Samuelsson
>>>>
>>>>         
>>> target/linux/Makefile.in : line 148
>>>
>>> $(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
>>>        cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
>>>        $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
>>>
>>>
>>> and LINUX26_KCONFIG is "" because BR2_PACKAGE_LINUX_KCONFIG=""
>>>
>>>
>>>       
>> Gotcha!
>>
>> Why not try the "Advanced Linux configuration" recently added
>> This should allow you to do "make xconfig" to create the needed file.
>>
>>     
> Wait! so we should now include our kernel .config files in buildroot 
> build process?
> If so Why?
>
> BR,
> I.
> _______________________________________________
>   
Never mind that. I've selected Kernel type (none).

I.

[Buildroot] svn At revision 20289 breakage

[Ulf Samuelsson]

----- Original Message ----- 
From: "Babarovic Ivica" <ivica.babarovic@asist.si>
To: <buildroot@uclibc.org>
Sent: Friday, October 19, 2007 8:39 AM
Subject: Re: [Buildroot] svn At revision 20289 breakage


> Ulf Samuelsson wrote:
>>>>
>>>> Key question:
>>>>
>>>> What does
>>>>
>>>> $ cp a
>>>>
>>>> do?
>>>>
>>>> Best Regards
>>>> Ulf Samuelsson
>>>>
>>>
>>> target/linux/Makefile.in : line 148
>>>
>>> $(LINUX26_DIR)/.configured: $(LINUX26_DIR)/.patched $(LINUX26_KCONFIG)
>>>        cp -dpf $(LINUX26_KCONFIG) $(LINUX26_DIR)/.config
>>>        $(SED) '/CONFIG_AEABI=y/d' $(LINUX26_DIR)/.config
>>>
>>>
>>> and LINUX26_KCONFIG is "" because BR2_PACKAGE_LINUX_KCONFIG=""
>>>
>>>
>>
>> Gotcha!
>>
>> Why not try the "Advanced Linux configuration" recently added
>> This should allow you to do "make xconfig" to create the needed file.
>>
> Wait! so we should now include our kernel .config files in buildroot
> build process?
> If so Why?


It is always the case that you have to provide a ".config" file for linux.

For some lucky souls Buildroot will do it for you.
This is when there is an appropriate definition somewhere in the target 
directory,
and if you have supplied the right kernel.

For some unlucky souls, they now have an option to start a "make xconfig"
to get a window allowing them to configure things instead of having a failed 
build.

>
> BR,
> I.


Best Regards
Ulf Samuelsson                ulf at atmel.com
Atmel Nordic AB
Mail:  Box 2033, 174 02 Sundbyberg, Sweden
Visit:  Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22     Fax +46 (8) 441 54 29
GSM    +46 (706) 22 44 57

Technical support when I am not available:
AT89 C51 Applications Group: mailto:micro.hotline at nto.atmel.com
AT90 AVR Applications Group: mailto:avr at atmel.com
AT91 ARM Applications Group: mailto:at91support at atmel.com
FPSLIC Application Group: mailto:fpslic at atmel.com Best AVR
link: www.avrfreaks.net 

[Buildroot] svn At revision 20289 breakage

[Babarovic Ivica]

Ulf Samuelsson wrote:
>
> It is always the case that you have to provide a ".config" file for 
> linux.
>
> For some lucky souls Buildroot will do it for you.
> This is when there is an appropriate definition somewhere in the 
> target directory,
> and if you have supplied the right kernel.
Well, I guess I was lucky until now. I never provided any kernel or 
.config files.
I still fail to see why this is important for buildroot build. Kernel 
headers?

I have a .config file from a kernel I build. Should I put that into 
buildroot process?
What differences would it make?
>
> For some unlucky souls, they now have an option to start a "make xconfig"
> to get a window allowing them to configure things instead of having a 
> failed build.
>

[Buildroot] svn At revision 20289 breakage

[Ulf Samuelsson]

----- Original Message ----- 
From: "Babarovic Ivica" <ivica.babarovic@asist.si>
To: "Ulf Samuelsson" <ulf@atmel.com>
Cc: <buildroot@uclibc.org>
Sent: Friday, October 19, 2007 10:13 AM
Subject: Re: [Buildroot] svn At revision 20289 breakage


> Ulf Samuelsson wrote:
>>
>> It is always the case that you have to provide a ".config" file for 
>> linux.
>>
>> For some lucky souls Buildroot will do it for you.
>> This is when there is an appropriate definition somewhere in the target 
>> directory,
>> and if you have supplied the right kernel.
> Well, I guess I was lucky until now. I never provided any kernel or 
> .config files.
> I still fail to see why this is important for buildroot build. Kernel 
> headers?
>
> I have a .config file from a kernel I build. Should I put that into 
> buildroot process?
> What differences would it make?
>>


If you want buildroot to build the kernel for you,
you need to ensure that LINUX26_KCONFIG
is defined as a link to your ".config" file when
the linus kernel is built.

The difference is that it will be one less script to run
you will get the modules automatically inserted into the root file system,
and the result will be in the binaries directory.

With the Advanced Kernel Configuration, you should be able to build 
basically
any kernel version, and you are able to apply patches much more freely
than before.

If you use the same version as the kernel headers, then
your kernel version choice is rather limited, and
if you choose to go with the latest, then the kernel version
will be updated once or twice a month.

Best Regards
Ulf Samuelsson                ulf at atmel.com
Atmel Nordic AB
Mail:  Box 2033, 174 02 Sundbyberg, Sweden
Visit:  Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22     Fax +46 (8) 441 54 29
GSM    +46 (706) 22 44 57 

[Buildroot] svn At revision 20289 breakage

[Ulf Samuelsson]

link: www.avrfreaks.net
----- Original Message ----- 
From: "Kuten Ivan" <ivan.kuten@promwad.com>
To: "Babarovic Ivica" <ivica.babarovic@asist.si>
Cc: "Ulf Samuelsson" <ulf@atmel.com>; <buildroot@uclibc.org>
Sent: Friday, October 19, 2007 12:21 PM
Subject: Re: [Buildroot] svn At revision 20289 breakage


> Babarovic Ivica wrote:
>> Ulf Samuelsson wrote:
>>> It is always the case that you have to provide a ".config" file for
>>> linux.
>>>
>>> For some lucky souls Buildroot will do it for you.
>>> This is when there is an appropriate definition somewhere in the
>>> target directory,
>>> and if you have supplied the right kernel.
>> Well, I guess I was lucky until now. I never provided any kernel or
>> .config files.
>> I still fail to see why this is important for buildroot build. Kernel
>> headers?
>>
>> I have a .config file from a kernel I build. Should I put that into
>> buildroot process?
>> What differences would it make?
>>> For some unlucky souls, they now have an option to start a "make 
>>> xconfig"
>>> to get a window allowing them to configure things instead of having a
>>> failed build.
>>>
>> _______________________________________________
>> buildroot mailing list
>> buildroot at uclibc.org
>> http://busybox.net/mailman/listinfo/buildroot
>
> As for me, I'm not using building kernel in buildroot - I'm building it 
> separately.
> And with recent changes made by Ulf, we have only to regenerate our 
> .config buildroot config
> and to select Kernel -> "none". And I have buildroot build OK again.
> The only thing that Ulf forget to warn people that if they have old 
> buildroot .config
> they must regenerate it and select kernel .config or kernel none , 
> otherwise you will get that error
> messages when doing cp.
>

It was Bernhard which introduced the new kernel selection so dont blame me.

The old way of building the kernel really suck, so I understand why you 
build it separately.

I added the Advanced Kernel Configuration last week to fix those problems.
You can select any 2.6.x.y kernel.
You can add -rc# patches, -mm# patches and your own proprietary patch which 
is located in $(DL_DIR)
You can select easily zImage,bzImage, uImage, vmlinux (proprietary).
    It would be good if you gave that one a try and provide feedback on any 
drawbacks you see.


> Best regards,
> Ivan


Best Regards
Ulf Samuelsson                ulf at atmel.com
Atmel Nordic AB
Mail:  Box 2033, 174 02 Sundbyberg, Sweden
Visit:  Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22     Fax +46 (8) 441 54 29
GSM    +46 (706) 22 44 57

[Buildroot] svn At revision 20289 breakage

[Kuten Ivan]

Babarovic Ivica wrote:
> Ulf Samuelsson wrote:
>> It is always the case that you have to provide a ".config" file for 
>> linux.
>>
>> For some lucky souls Buildroot will do it for you.
>> This is when there is an appropriate definition somewhere in the 
>> target directory,
>> and if you have supplied the right kernel.
> Well, I guess I was lucky until now. I never provided any kernel or 
> .config files.
> I still fail to see why this is important for buildroot build. Kernel 
> headers?
> 
> I have a .config file from a kernel I build. Should I put that into 
> buildroot process?
> What differences would it make?
>> For some unlucky souls, they now have an option to start a "make xconfig"
>> to get a window allowing them to configure things instead of having a 
>> failed build.
>>
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot

As for me, I'm not using building kernel in buildroot - I'm building it separately.
And with recent changes made by Ulf, we have only to regenerate our .config buildroot config
and to select Kernel -> "none". And I have buildroot build OK again.
The only thing that Ulf forget to warn people that if they have old buildroot .config
they must regenerate it and select kernel .config or kernel none , otherwise you will get that error
messages when doing cp.

Best regards,
Ivan
--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------

[Buildroot] svn At revision 20289 breakage

[Kuten Ivan]

> 
> It was Bernhard which introduced the new kernel selection so dont blame me.
> 
> The old way of building the kernel really suck, so I understand why you 
> build it separately.
> 
> I added the Advanced Kernel Configuration last week to fix those problems.
> You can select any 2.6.x.y kernel.
> You can add -rc# patches, -mm# patches and your own proprietary patch which 
> is located in $(DL_DIR)
> You can select easily zImage,bzImage, uImage, vmlinux (proprietary).
>     It would be good if you gave that one a try and provide feedback on any 
> drawbacks you see.
> 

Sorry Ulf, I did not want to blame anybody.

Yeah, for me it was quite surprising that having buildroot .config which was working
for several months to see that it's not working anymore.

OK, i'll try building kernel within buildroot and will inform about results.


Best regards,
Ivan
-- 
--------------------------------
Embedded Linux engineer,
Promwad Company: http://www.promwad.com/
Homepage : http://www.ivankuten.com/
--------------------------------