[Buildroot] Openssl won't compile

[Buildroot] Openssl won't compile

[Nathanael D. Noblet]

Hello,
   Anyone experience difficulty compiling openssl (0.9.7m)? I get a 
missing sys/timeb.h, upgrading to ssl 0.9.8g) is no better as the 
patches don't apply and I'm not sure what the ones I couldn't fix were 
doing.

   For what it is worth, I'm using gcc-3.1 and a daily snapshot of uclibc.


-- 
Nathanael d. Noblet
Gnat Solutions, Inc
T: 403.875.4613

[Buildroot] Openssl won't compile

[Hamish Moffatt]

On Tue, Jul 22, 2008 at 09:13:56PM -0600, Nathanael D. Noblet wrote:
> Hello,
>    Anyone experience difficulty compiling openssl (0.9.7m)? I get a 
> missing sys/timeb.h, upgrading to ssl 0.9.8g) is no better as the 
> patches don't apply and I'm not sure what the ones I couldn't fix were 
> doing.
> 
>    For what it is worth, I'm using gcc-3.1 and a daily snapshot of uclibc.

I'm not having any trouble building it for armeb with gcc 4.1.2 with
uClibc 0.9.29.


Hamish
-- 
Hamish Moffatt VK3SB <hamish@debian.org> <hamish@cloud.net.au>

[Buildroot] Openssl won't compile

[Nathanael D. Noblet]

Hamish Moffatt wrote:
> On Tue, Jul 22, 2008 at 09:13:56PM -0600, Nathanael D. Noblet wrote:
>> Hello,
>>    Anyone experience difficulty compiling openssl (0.9.7m)? I get a 
>> missing sys/timeb.h, upgrading to ssl 0.9.8g) is no better as the 
>> patches don't apply and I'm not sure what the ones I couldn't fix were 
>> doing.
>>
>>    For what it is worth, I'm using gcc-3.1 and a daily snapshot of uclibc.
> 
> I'm not having any trouble building it for armeb with gcc 4.1.2 with
> uClibc 0.9.29.

Using 0.9.29 I can't boot my target device. The rootfs boots in qemu but 
I get a general protection fault on the real hardware. I've tried 4.2.x 
and 4.3 and 4.4. Perhaps I'll try 4.1.2....


-- 
Nathanael d. Noblet
Gnat Solutions, Inc
T: 403.875.4613

[Buildroot] Openssl won't compile

[Hamish Moffatt]

On Wed, Jul 23, 2008 at 09:36:15AM -0600, Nathanael D. Noblet wrote:
> Hamish Moffatt wrote:
> > On Tue, Jul 22, 2008 at 09:13:56PM -0600, Nathanael D. Noblet wrote:
> >> Hello,
> >>    Anyone experience difficulty compiling openssl (0.9.7m)? I get a 
> >> missing sys/timeb.h, upgrading to ssl 0.9.8g) is no better as the 
> >> patches don't apply and I'm not sure what the ones I couldn't fix were 
> >> doing.
> >>
> >>    For what it is worth, I'm using gcc-3.1 and a daily snapshot of uclibc.
> > 
> > I'm not having any trouble building it for armeb with gcc 4.1.2 with
> > uClibc 0.9.29.
> 
> Using 0.9.29 I can't boot my target device. The rootfs boots in qemu but 
> I get a general protection fault on the real hardware. I've tried 4.2.x 
> and 4.3 and 4.4. Perhaps I'll try 4.1.2....

I'm using 4.1.2 because I couldn't get 4.2 to build for armeb with
either OABI or EABI, though that was about 8-9 months ago. I'm using
OABI with 4.1.2 successfully (I don't think EABI builds though).

What is your target hardware?

gcc-3.1 is old; you might be able to get away with 3.3 but 4.x would be
much better (and you'll have more chance of getting assistance from the
community).

Hamish
-- 
Hamish Moffatt VK3SB <hamish@debian.org> <hamish@cloud.net.au>