[Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian

Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed

* [Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian
@ 2012-03-17  9:38 Stephan Hoffmann
  2012-03-18 17:55 ` Arnout Vandecappelle
  0 siblings, 1 reply; 4+ messages in thread
From: Stephan Hoffmann @ 2012-03-17  9:38 UTC (permalink / raw)
  To: buildroot

From: "Alvaro G. M" <alvaro.gamez@hazent.com>

Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Tested Microblaze LE on a clean install.
---
 target/Config.in.arch |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/target/Config.in.arch b/target/Config.in.arch
index 25c6e50..1910ff6 100644
--- a/target/Config.in.arch
+++ b/target/Config.in.arch
@@ -21,6 +21,10 @@ config BR2_i386
 config BR2_m68k
 	bool "m68k"
 	depends on BROKEN # ice in uclibc / inet_ntoa_r
+config BR2_microblazeel
+	bool "Microblaze AXI (little-endian)"
+config BR2_microblazebe
+	bool "Microblaze non-AXI (big-endian)""
 config BR2_mips
 	bool "mips"
 config BR2_mipsel
@@ -40,6 +44,10 @@ config BR2_xtensa
 	bool "xtensa"
 endchoice
 
+config BR2_microblaze
+	bool
+	default y if BR2_microblazeel || BR2_microblazebe
+
 #
 # Keep the variants separate, there's no need to clutter everything else.
 # sh is fairly "special" in this regard, as virtually everyone else has
@@ -515,6 +523,7 @@ config BR2_ARCH
 	default "i686"		if BR2_x86_athlon
 	default "i686"		if BR2_x86_athlon_4
 	default "m68k"		if BR2_m68k
+	default "microblaze"	if BR2_microblaze
 	default "mips"		if BR2_mips
 	default "mipsel"	if BR2_mipsel
 	default "powerpc"	if BR2_powerpc
@@ -542,10 +551,12 @@ config BR2_ARCH
 config BR2_ENDIAN
 	string
 	default "LITTLE" if BR2_arm || BR2_bfin || BR2_i386 || BR2_mipsel || \
-			    BR2_sh3 || BR2_sh4 || BR2_sh4a || BR2_x86_64 || BR2_sh64
+			    BR2_sh3 || BR2_sh4 || BR2_sh4a || BR2_x86_64 || BR2_sh64 || \
+			    BR2_microblazeel
 	default "BIG"    if BR2_armeb || BR2_avr32 || BR2_m68k || BR2_mips || \
 			    BR2_powerpc || BR2_sh2 || BR2_sh2a || \
-			    BR2_sh3eb || BR2_sh4eb || BR2_sh4aeb || BR2_sparc
+			    BR2_sh3eb || BR2_sh4eb || BR2_sh4aeb || BR2_sparc || \
+			    BR2_microblazebe
 
 config BR2_GCC_TARGET_TUNE
 	string
-- 
1.7.9.1



-- 
reLinux     -    Stephan Hoffmann
Am Schmidtgrund 124    50765 K?ln
Tel. +49.221.95595-19    Fax: -64
www.reLinux.de     sho at reLinux.de

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian
  2012-03-17  9:38 [Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian Stephan Hoffmann
@ 2012-03-18 17:55 ` Arnout Vandecappelle
  0 siblings, 0 replies; 4+ messages in thread
From: Arnout Vandecappelle @ 2012-03-18 17:55 UTC (permalink / raw)
  To: buildroot

On Saturday 17 March 2012 10:38:50 Stephan Hoffmann wrote:
> From: "Alvaro G. M" <alvaro.gamez@hazent.com>
> 
> Signed-off-by: Stephan Hoffmann <sho@relinux.de>
> Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
> Tested-by: Stephan Hoffmann <sho@relinux.de>
> Tested Microblaze LE on a clean install.
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

-- 
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [Buildroot] [PATCH 1/3] DOWNLOAD: change $1=DIRECTORY_URL, $2=FILE_NAME to $1=FULL_FILE_URL, $2=FILE_NAME
@ 2012-03-16 13:42 Alvaro G. M
  2012-03-16 13:42 ` [Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian Alvaro G. M
  0 siblings, 1 reply; 4+ messages in thread
From: Alvaro G. M @ 2012-03-16 13:42 UTC (permalink / raw)
  To: buildroot

From: "Alvaro G. M" <alvaro.gamez@hazent.com>

This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.

Same thing with the SOURCE_CHECK_WGET and SCP functions.

All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
---
 docs/manual/adding-packages-handwritten.txt |    2 +-
 linux/linux.mk                              |    2 +-
 package/Makefile.package.in                 |   18 +++++++++++-------
 package/cups/cups.mk                        |    2 +-
 package/fis/fis.mk                          |    2 +-
 package/games/doom-wad/doom-wads.mk         |    2 +-
 package/gettext/gettext.mk                  |    2 +-
 package/netkitbase/netkitbase.mk            |    2 +-
 package/netkittelnet/netkittelnet.mk        |    2 +-
 package/newt/newt.mk                        |    2 +-
 package/tinyhttpd/tinyhttpd.mk              |    2 +-
 package/ttcp/ttcp.mk                        |    2 +-
 package/uemacs/uemacs.mk                    |    2 +-
 package/vpnc/vpnc.mk                        |    2 +-
 package/xfsprogs/xfsprogs.mk                |    2 +-
 toolchain/gcc/gcc-uclibc-4.x.mk             |    2 +-
 toolchain/gdb/gdb.mk                        |    2 +-
 toolchain/kernel-headers/kernel-headers.mk  |    2 +-
 toolchain/toolchain-external/ext-tool.mk    |    6 +++---
 toolchain/uClibc/uclibc.mk                  |    2 +-
 20 files changed, 32 insertions(+), 28 deletions(-)

diff --git a/docs/manual/adding-packages-handwritten.txt b/docs/manual/adding-packages-handwritten.txt
index a9d247c..583f303 100644
--- a/docs/manual/adding-packages-handwritten.txt
+++ b/docs/manual/adding-packages-handwritten.txt
@@ -22,7 +22,7 @@ existing manual makefiles and to help understand how they work.*
 11: LIBFOO_TARGET_BINARY:=usr/bin/foo
 12:
 13: $(DL_DIR)/$(LIBFOO_SOURCE):
-14: 	$(call DOWNLOAD,$(LIBFOO_SITE),$(LIBFOO_SOURCE))
+14: 	$(call DOWNLOAD,$(LIBFOO_SITE)/$(LIBFOO_SOURCE))
 15:
 16: $(LIBFOO_DIR)/.source: $(DL_DIR)/$(LIBFOO_SOURCE)
 17: 	$(ZCAT) $(DL_DIR)/$(LIBFOO_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
diff --git a/linux/linux.mk b/linux/linux.mk
index ae236d4..58cbe8e 100644
--- a/linux/linux.mk
+++ b/linux/linux.mk
@@ -98,7 +98,7 @@ define LINUX_DOWNLOAD_PATCHES
 	$(if $(LINUX_PATCHES),
 		@$(call MESSAGE,"Download additional patches"))
 	$(foreach patch,$(filter ftp://% http://%,$(LINUX_PATCHES)),\
-		$(call DOWNLOAD,$(dir $(patch)),$(notdir $(patch)))$(sep))
+		$(call DOWNLOAD,$(patch))$(sep))
 endef
 
 LINUX_POST_DOWNLOAD_HOOKS += LINUX_DOWNLOAD_PATCHES
diff --git a/package/Makefile.package.in b/package/Makefile.package.in
index 59adce1..f7b6566 100644
--- a/package/Makefile.package.in
+++ b/package/Makefile.package.in
@@ -203,11 +203,11 @@ endef
 # to prepend the path with a slash: scp://[user@]host:/absolutepath
 define DOWNLOAD_SCP
 	test -e $(DL_DIR)/$(2) || \
-	$(SCP) $(call stripurischeme,$(call qstrip,$(1)))/$(2) $(DL_DIR)
+	$(SCP) '$(call stripurischeme,$(call qstrip,$(1)))' $(DL_DIR)/$(2)
 endef
 
 define SOURCE_CHECK_SCP
-	$(SSH) $(call domain,$(1),:) ls $(call notdomain,$(1)/$(2),:) > /dev/null
+	$(SSH) $(call domain,$(1),:) ls '$(call notdomain,$(1),:)' > /dev/null
 endef
 
 define SHOW_EXTERNAL_DEPS_SCP
@@ -241,12 +241,12 @@ endef
 # download fails).
 define DOWNLOAD_WGET
 	test -e $(DL_DIR)/$(2) || \
-	$(WGET) -O $(DL_DIR)/$(2) $(call qstrip,$(1))/$(2) || \
+	$(WGET) -O $(DL_DIR)/$(2) '$(call qstrip,$(1))' || \
 	(rm -f $(DL_DIR)/$(2) ; exit 1)
 endef
 
 define SOURCE_CHECK_WGET
-  $(WGET) --spider $(call qstrip,$(1))/$(2)
+  $(WGET) --spider '$(call qstrip,$(1))'
 endef
 
 define SHOW_EXTERNAL_DEPS_WGET
@@ -280,6 +280,10 @@ endef
 ################################################################################
 
 define DOWNLOAD
+	$(call DOWNLOAD_INNER,$(1),$(if $(2),$(2),$(notdir $(1))))
+endef
+
+define DOWNLOAD_INNER
 	$(Q)if test -n "$(call qstrip,$(BR2_PRIMARY_SITE))" ; then \
 		case "$(call geturischeme,$(BR2_PRIMARY_SITE))" in \
 			scp) $(call $(DL_MODE)_SCP,$(BR2_PRIMARY_SITE),$(2)) && exit ;; \
@@ -298,7 +302,7 @@ define DOWNLOAD
 		esac ; \
 	fi ; \
 	if test -n "$(call qstrip,$(BR2_BACKUP_SITE))" ; then \
-		$(call $(DL_MODE)_WGET,$(BR2_BACKUP_SITE),$(2)) && exit ; \
+		$(call $(DL_MODE)_WGET,$(BR2_BACKUP_SITE)/$(2),$(2)) && exit ; \
 	fi ; \
 	exit 1
 endef
@@ -322,8 +326,8 @@ ifeq ($(DL_MODE),DOWNLOAD)
 		(test -z $($(PKG)_PATCH) || test -e $(DL_DIR)$($(PKG)_PATCH))) || \
 		$(call MESSAGE,"Downloading")
 endif
-	$(if $($(PKG)_SOURCE),$(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_SOURCE)))
-	$(if $($(PKG)_PATCH),$(call DOWNLOAD,$($(PKG)_SITE),$($(PKG)_PATCH)))
+	$(if $($(PKG)_SOURCE),$(call DOWNLOAD,$($(PKG)_SITE)/$($(PKG)_SOURCE)))
+	$(if $($(PKG)_PATCH),$(call DOWNLOAD,$($(PKG)_SITE)/$($(PKG)_PATCH)))
 	$(foreach hook,$($(PKG)_POST_DOWNLOAD_HOOKS),$(call $(hook))$(sep))
 ifeq ($(DL_MODE),DOWNLOAD)
 	$(Q)mkdir -p $(@D)
diff --git a/package/cups/cups.mk b/package/cups/cups.mk
index 4e8db71..9efd6e9 100644
--- a/package/cups/cups.mk
+++ b/package/cups/cups.mk
@@ -65,7 +65,7 @@ else
 endif
 
 $(DL_DIR)/$(CUPS_SOURCE):
-	 $(call DOWNLOAD,$(CUPS_SITE),$(CUPS_SOURCE))
+	 $(call DOWNLOAD,$(CUPS_SITE)/$(CUPS_SOURCE))
 
 $(CUPS_DIR)/.unpacked: $(DL_DIR)/$(CUPS_SOURCE)
 	$(CUPS_CAT) $(DL_DIR)/$(CUPS_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
diff --git a/package/fis/fis.mk b/package/fis/fis.mk
index 2942449..0975f3f 100644
--- a/package/fis/fis.mk
+++ b/package/fis/fis.mk
@@ -11,7 +11,7 @@ FIS_BINARY:=fis
 FIS_TARGET_BINARY:=sbin/fis
 
 $(DL_DIR)/$(FIS_SOURCE):
-	 $(call DOWNLOAD,$(FIS_SITE),$(FIS_SOURCE))
+	 $(call DOWNLOAD,$(FIS_SITE)/$(FIS_SOURCE))
 
 fis-source: $(DL_DIR)/$(FIS_SOURCE)
 
diff --git a/package/games/doom-wad/doom-wads.mk b/package/games/doom-wad/doom-wads.mk
index bae2420..c0bf4fb 100644
--- a/package/games/doom-wad/doom-wads.mk
+++ b/package/games/doom-wad/doom-wads.mk
@@ -10,7 +10,7 @@ DOOM_WAD_SITE = ftp://ftp.idsoftware.com/idstuff/doom/
 DOOM_WAD_DIR=$(BUILD_DIR)/doom-wad-$(DOOM_WAD_VERSION)
 
 $(DL_DIR)/$(DOOM_WAD_SOURCE):
-	 $(call DOWNLOAD,$(DOOM_WAD_SITE),$(DOOM_WAD_SOURCE))
+	 $(call DOWNLOAD,$(DOOM_WAD_SITE)/$(DOOM_WAD_SOURCE))
 
 doom-wad-source: $(DL_DIR)/$(DOOM_WAD_SOURCE)
 
diff --git a/package/gettext/gettext.mk b/package/gettext/gettext.mk
index f4c8c76..f3605da 100644
--- a/package/gettext/gettext.mk
+++ b/package/gettext/gettext.mk
@@ -18,7 +18,7 @@ LIBINTL_TARGET_BINARY:=usr/lib/libintl.so
 endif
 
 $(DL_DIR)/$(GETTEXT_SOURCE):
-	 $(call DOWNLOAD,$(GETTEXT_SITE),$(GETTEXT_SOURCE))
+	 $(call DOWNLOAD,$(GETTEXT_SITE)/$(GETTEXT_SOURCE))
 
 gettext-source: $(DL_DIR)/$(GETTEXT_SOURCE)
 
diff --git a/package/netkitbase/netkitbase.mk b/package/netkitbase/netkitbase.mk
index dde8f9f..83991f2 100644
--- a/package/netkitbase/netkitbase.mk
+++ b/package/netkitbase/netkitbase.mk
@@ -12,7 +12,7 @@ NETKITBASE_BINARY:=inetd/inetd
 NETKITBASE_TARGET_BINARY:=usr/sbin/inetd
 
 $(DL_DIR)/$(NETKITBASE_SOURCE):
-	 $(call DOWNLOAD,$(NETKITBASE_SITE),$(NETKITBASE_SOURCE))
+	 $(call DOWNLOAD,$(NETKITBASE_SITE)/$(NETKITBASE_SOURCE))
 
 netkitbase-source: $(DL_DIR)/$(NETKITBASE_SOURCE)
 
diff --git a/package/netkittelnet/netkittelnet.mk b/package/netkittelnet/netkittelnet.mk
index e9f40ca..ff05318 100644
--- a/package/netkittelnet/netkittelnet.mk
+++ b/package/netkittelnet/netkittelnet.mk
@@ -12,7 +12,7 @@ NETKITTELNET_BINARY:=telnetd/telnetd
 NETKITTELNET_TARGET_BINARY:=usr/sbin/telnetd
 
 $(DL_DIR)/$(NETKITTELNET_SOURCE):
-	 $(call DOWNLOAD,$(NETKITTELNET_SITE),$(NETKITTELNET_SOURCE))
+	 $(call DOWNLOAD,$(NETKITTELNET_SITE)/$(NETKITTELNET_SOURCE))
 
 netkittelnet-source: $(DL_DIR)/$(NETKITTELNET_SOURCE)
 
diff --git a/package/newt/newt.mk b/package/newt/newt.mk
index eb944a9..ac450e0 100644
--- a/package/newt/newt.mk
+++ b/package/newt/newt.mk
@@ -11,7 +11,7 @@ NEWT_VERSION=0.51.0
 NEWT_CFLAGS=-Os -g -fPIC
 
 $(DL_DIR)/$(NEWT_SOURCE):
-	$(call DOWNLOAD,$(NEWT_SITE),$(NEWT_SOURCE))
+	$(call DOWNLOAD,$(NEWT_SITE)/$(NEWT_SOURCE))
 
 $(NEWT_DIR)/.source: $(DL_DIR)/$(NEWT_SOURCE)
 	$(NEWT_CAT) $(DL_DIR)/$(NEWT_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
diff --git a/package/tinyhttpd/tinyhttpd.mk b/package/tinyhttpd/tinyhttpd.mk
index 739849f..0f95d06 100644
--- a/package/tinyhttpd/tinyhttpd.mk
+++ b/package/tinyhttpd/tinyhttpd.mk
@@ -12,7 +12,7 @@ TINYHTTPD_BINARY:=httpd
 TINYHTTPD_TARGET_BINARY:=usr/sbin/tinyhttpd
 
 $(DL_DIR)/$(TINYHTTPD_SOURCE):
-	 $(call DOWNLOAD,$(TINYHTTPD_SITE),$(TINYHTTPD_SOURCE))
+	 $(call DOWNLOAD,$(TINYHTTPD_SITE)/$(TINYHTTPD_SOURCE))
 
 tinyhttpd-source: $(DL_DIR)/$(TINYHTTPD_SOURCE)
 
diff --git a/package/ttcp/ttcp.mk b/package/ttcp/ttcp.mk
index 006b74c..1acf120 100644
--- a/package/ttcp/ttcp.mk
+++ b/package/ttcp/ttcp.mk
@@ -10,7 +10,7 @@ TTCP_SOURCE=ttcp$(TTCP_VERSION).c
 TTCP_DIR=$(BUILD_DIR)/ttcp$(TTCP_VERSION)
 
 $(DL_DIR)/$(TTCP_SOURCE):
-	 $(call DOWNLOAD,$(TTCP_SOURCE_URL),$(TTCP_SOURCE))
+	 $(call DOWNLOAD,$(TTCP_SOURCE_URL)/$(TTCP_SOURCE))
 
 $(TTCP_DIR)/.unpacked: $(DL_DIR)/$(TTCP_SOURCE)
 	-mkdir $(TTCP_DIR)
diff --git a/package/uemacs/uemacs.mk b/package/uemacs/uemacs.mk
index 8355a7f..62b0911 100644
--- a/package/uemacs/uemacs.mk
+++ b/package/uemacs/uemacs.mk
@@ -12,7 +12,7 @@ UEMACS_BINARY:=em
 UEMACS_TARGET_BINARY:=usr/bin/emacs
 
 $(DL_DIR)/$(UEMACS_SOURCE):
-	 $(call DOWNLOAD,$(UEMACS_SITE),$(UEMACS_SOURCE))
+	 $(call DOWNLOAD,$(UEMACS_SITE)/$(UEMACS_SOURCE))
 
 uemacs-source: $(DL_DIR)/$(UEMACS_SOURCE)
 
diff --git a/package/vpnc/vpnc.mk b/package/vpnc/vpnc.mk
index 5a8c700..d8d9654 100644
--- a/package/vpnc/vpnc.mk
+++ b/package/vpnc/vpnc.mk
@@ -15,7 +15,7 @@ VPNC_TARGET_BINARY:=$(VPNC_DEST_DIR)/vpnc
 VPNC_TARGET_SCRIPT:=$(TARGET_DIR)/etc/vpnc/default.conf
 
 $(DL_DIR)/$(VPNC_SOURCE):
-	$(call DOWNLOAD,$(VPNC_SITE),$(VPNC_SOURCE))
+	$(call DOWNLOAD,$(VPNC_SITE)/$(VPNC_SOURCE))
 
 $(VPNC_DIR)/.unpacked: $(DL_DIR)/$(VPNC_SOURCE)
 	$(VPNC_CAT) $(DL_DIR)/$(VPNC_SOURCE) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
diff --git a/package/xfsprogs/xfsprogs.mk b/package/xfsprogs/xfsprogs.mk
index 68db2f7..52fec09 100644
--- a/package/xfsprogs/xfsprogs.mk
+++ b/package/xfsprogs/xfsprogs.mk
@@ -18,7 +18,7 @@ XFSPROGS_STRIP_LIBDEP:= \
 	repair/xfs_repair quota/xfs_quota
 
 $(DL_DIR)/$(XFSPROGS_SOURCE):
-	 $(call DOWNLOAD,$(XFSPROGS_SITE),$(XFSPROGS_SOURCE))
+	 $(call DOWNLOAD,$(XFSPROGS_SITE)/$(XFSPROGS_SOURCE))
 
 xfsprogs-source: $(DL_DIR)/$(XFSPROGS_SOURCE)
 
diff --git a/toolchain/gcc/gcc-uclibc-4.x.mk b/toolchain/gcc/gcc-uclibc-4.x.mk
index 5eb7505..d9547fb 100644
--- a/toolchain/gcc/gcc-uclibc-4.x.mk
+++ b/toolchain/gcc/gcc-uclibc-4.x.mk
@@ -172,7 +172,7 @@ endif
 
 $(DL_DIR)/$(GCC_SOURCE):
 	mkdir -p $(DL_DIR)
-	$(call DOWNLOAD,$(GCC_SITE),$(GCC_SOURCE))
+	$(call DOWNLOAD,$(GCC_SITE)/$(GCC_SOURCE))
 
 gcc-unpacked: $(GCC_DIR)/.patched
 $(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
diff --git a/toolchain/gdb/gdb.mk b/toolchain/gdb/gdb.mk
index 56faf49..b5c085b 100644
--- a/toolchain/gdb/gdb.mk
+++ b/toolchain/gdb/gdb.mk
@@ -24,7 +24,7 @@ endif
 GDB_DIR:=$(TOOLCHAIN_DIR)/gdb-$(GDB_VERSION)
 
 $(DL_DIR)/$(GDB_SOURCE):
-	$(call DOWNLOAD,$(GDB_SITE),$(GDB_SOURCE))
+	$(call DOWNLOAD,$(GDB_SITE)/$(GDB_SOURCE))
 
 gdb-unpacked: $(GDB_DIR)/.unpacked
 $(GDB_DIR)/.unpacked: $(DL_DIR)/$(GDB_SOURCE)
diff --git a/toolchain/kernel-headers/kernel-headers.mk b/toolchain/kernel-headers/kernel-headers.mk
index 72c6007..c464c37 100644
--- a/toolchain/kernel-headers/kernel-headers.mk
+++ b/toolchain/kernel-headers/kernel-headers.mk
@@ -81,7 +81,7 @@ $(DL_DIR)/$(LINUX_HEADERS_SOURCE):
 ifeq ($(BR2_KERNEL_HEADERS_SNAP),y)
 	$(error No local $@ found, cannot continue. Are you sure you wanted to enable BR2_KERNEL_HEADERS_SNAP?)
 endif
-	$(call DOWNLOAD,$(LINUX_HEADERS_SITE),$(LINUX_HEADERS_SOURCE))
+	$(call DOWNLOAD,$(LINUX_HEADERS_SITE)/$(LINUX_HEADERS_SOURCE))
 
 kernel-headers: $(LINUX_HEADERS_DIR)/.configured
 
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index 31ba50f..3c97de1 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -253,10 +253,10 @@ endif
 # components than usual.
 ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1),y)
 $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1):
-	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_1),$(TOOLCHAIN_EXTERNAL_SOURCE_1))
+	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_1)/$(TOOLCHAIN_EXTERNAL_SOURCE_1))
 
 $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_2):
-	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_2),$(TOOLCHAIN_EXTERNAL_SOURCE_2))
+	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_2)/$(TOOLCHAIN_EXTERNAL_SOURCE_2))
 
 $(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_2)
 	mkdir -p $(@D)
@@ -279,7 +279,7 @@ endif
 else
 # Download and extraction of a toolchain
 $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE):
-	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE),$(TOOLCHAIN_EXTERNAL_SOURCE))
+	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE)$(TOOLCHAIN_EXTERNAL_SOURCE),$(TOOLCHAIN_EXTERNAL_SOURCE))
 
 $(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE)
 	mkdir -p $(@D)
diff --git a/toolchain/uClibc/uclibc.mk b/toolchain/uClibc/uclibc.mk
index ee474bb..32cbe46 100644
--- a/toolchain/uClibc/uclibc.mk
+++ b/toolchain/uClibc/uclibc.mk
@@ -67,7 +67,7 @@ UCLIBC_ARM_TYPE:=CONFIG_$(call qstrip,$(BR2_ARM_TYPE))
 UCLIBC_SPARC_TYPE:=CONFIG_SPARC_$(call qstrip,$(BR2_SPARC_TYPE))
 
 $(DL_DIR)/$(UCLIBC_SOURCE):
-	$(call DOWNLOAD,$(UCLIBC_SITE),$(UCLIBC_SOURCE))
+	$(call DOWNLOAD,$(UCLIBC_SITE)/$(UCLIBC_SOURCE))
 
 uclibc-unpacked: $(UCLIBC_DIR)/.unpacked
 $(UCLIBC_DIR)/.unpacked: $(DL_DIR)/$(UCLIBC_SOURCE)
-- 
1.7.9.1

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian
  2012-03-16 13:42 [Buildroot] [PATCH 1/3] DOWNLOAD: change $1=DIRECTORY_URL, $2=FILE_NAME to $1=FULL_FILE_URL, $2=FILE_NAME Alvaro G. M
@ 2012-03-16 13:42 ` Alvaro G. M
  2012-03-18 21:52   ` Peter Korsgaard
  0 siblings, 1 reply; 4+ messages in thread
From: Alvaro G. M @ 2012-03-16 13:42 UTC (permalink / raw)
  To: buildroot

From: "Alvaro G. M" <alvaro.gamez@hazent.com>

Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
---
 target/Config.in.arch |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/target/Config.in.arch b/target/Config.in.arch
index 25c6e50..1910ff6 100644
--- a/target/Config.in.arch
+++ b/target/Config.in.arch
@@ -21,6 +21,10 @@ config BR2_i386
 config BR2_m68k
 	bool "m68k"
 	depends on BROKEN # ice in uclibc / inet_ntoa_r
+config BR2_microblazeel
+	bool "Microblaze AXI (little-endian)"
+config BR2_microblazebe
+	bool "Microblaze non-AXI (big-endian)""
 config BR2_mips
 	bool "mips"
 config BR2_mipsel
@@ -40,6 +44,10 @@ config BR2_xtensa
 	bool "xtensa"
 endchoice
 
+config BR2_microblaze
+	bool
+	default y if BR2_microblazeel || BR2_microblazebe
+
 #
 # Keep the variants separate, there's no need to clutter everything else.
 # sh is fairly "special" in this regard, as virtually everyone else has
@@ -515,6 +523,7 @@ config BR2_ARCH
 	default "i686"		if BR2_x86_athlon
 	default "i686"		if BR2_x86_athlon_4
 	default "m68k"		if BR2_m68k
+	default "microblaze"	if BR2_microblaze
 	default "mips"		if BR2_mips
 	default "mipsel"	if BR2_mipsel
 	default "powerpc"	if BR2_powerpc
@@ -542,10 +551,12 @@ config BR2_ARCH
 config BR2_ENDIAN
 	string
 	default "LITTLE" if BR2_arm || BR2_bfin || BR2_i386 || BR2_mipsel || \
-			    BR2_sh3 || BR2_sh4 || BR2_sh4a || BR2_x86_64 || BR2_sh64
+			    BR2_sh3 || BR2_sh4 || BR2_sh4a || BR2_x86_64 || BR2_sh64 || \
+			    BR2_microblazeel
 	default "BIG"    if BR2_armeb || BR2_avr32 || BR2_m68k || BR2_mips || \
 			    BR2_powerpc || BR2_sh2 || BR2_sh2a || \
-			    BR2_sh3eb || BR2_sh4eb || BR2_sh4aeb || BR2_sparc
+			    BR2_sh3eb || BR2_sh4eb || BR2_sh4aeb || BR2_sparc || \
+			    BR2_microblazebe
 
 config BR2_GCC_TARGET_TUNE
 	string
-- 
1.7.9.1

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* [Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian
  2012-03-16 13:42 ` [Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian Alvaro G. M
@ 2012-03-18 21:52   ` Peter Korsgaard
  0 siblings, 0 replies; 4+ messages in thread
From: Peter Korsgaard @ 2012-03-18 21:52 UTC (permalink / raw)
  To: buildroot

>>>>> "Alvaro" == Alvaro G M <alvaro.gamez@hazent.com> writes:

 Alvaro> From: "Alvaro G. M" <alvaro.gamez@hazent.com>
 Alvaro> Signed-off-by: Stephan Hoffmann <sho@relinux.de>
 Alvaro> Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>

Committed, thanks.

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2012-03-18 21:52 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-17  9:38 [Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian Stephan Hoffmann
2012-03-18 17:55 ` Arnout Vandecappelle
  -- strict thread matches above, loose matches on Subject: below --
2012-03-16 13:42 [Buildroot] [PATCH 1/3] DOWNLOAD: change $1=DIRECTORY_URL, $2=FILE_NAME to $1=FULL_FILE_URL, $2=FILE_NAME Alvaro G. M
2012-03-16 13:42 ` [Buildroot] [PATCH 2/3] Microblaze: added architecture support for both big endian and low endian Alvaro G. M
2012-03-18 21:52   ` Peter Korsgaard

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox