* [Buildroot] [buildroot 0000967]: SEGV when running openssh
@ 2007-02-12 13:33 bugs at busybox.net
0 siblings, 0 replies; 2+ messages in thread
From: bugs at busybox.net @ 2007-02-12 13:33 UTC (permalink / raw)
To: buildroot
The following issue has been ASSIGNED.
======================================================================
http://busybox.net/bugs/view.php?id=967
======================================================================
Reported By: lerichi
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 967
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 07-23-2006 14:59 PDT
Last Modified: 02-12-2007 05:33 PST
======================================================================
Summary: SEGV when running openssh
Description:
I downloaded and did a standard build of the latest buildroot. Busybox
works just fine, but openssh and all its helpers just SEGV. Apart from
that, the other non-busybox proggies also die. So there must be a problem
with some library.
Just make a standard build (gcc-3.4.2), chroot into build_ARCH/root and
call sshd. It should die :-(
Any ideas? I have a suspicion that xstrdup() might be the cause.
Regards-
Richard
======================================================================
----------------------------------------------------------------------
bernhardf - 01-24-07 13:04
----------------------------------------------------------------------
Try to strace this and perpahs provide a simple testcase for us to
reproduce.
----------------------------------------------------------------------
gheeres - 02-01-07 13:53
----------------------------------------------------------------------
Attached strace output.
Build / configuration:
uClibc-snapshost (01/26/2007)
gcc-v4.1.1
openssh-v3.9p1
Same results attempting to use openssh-v4.5p1
If strace needs to be in different format, please provide instructions for
generating.
----------------------------------------------------------------------
gheeres - 02-01-07 14:10
----------------------------------------------------------------------
Older buildroot using:
uClibc-0.9.28 (non-snapshot)
gcc-v3.4.6
openssh-v3.9p1 or openssh-v4.5p1
Works correctly.
----------------------------------------------------------------------
gheeres - 02-03-07 17:31
----------------------------------------------------------------------
Checked out newest uClibc build (http://busybox.net/bugs/view.php?id=#02012007),
completely rebuilt entire
toolchain and build files. SSH is no longer SEGV.
----------------------------------------------------------------------
bernhardf - 02-04-07 03:24
----------------------------------------------------------------------
I consider this fixed now and shall close this issue within two weeks from
now on, unless somebody comes up to let us know that 0.9.28.1 and current
svn still has problems.
Thanks, all, for your help with testing.
Issue History
Date Modified Username Field Change
======================================================================
07-23-06 14:59 lerichi New Issue
07-23-06 14:59 lerichi Status new => assigned
07-23-06 14:59 lerichi Assigned To => uClibc
07-27-06 04:58 thrakhath Issue Monitored: thrakhath
01-24-07 13:04 bernhardf Note Added: 0002041
02-01-07 13:50 gheeres File Added: uClibc-snapshot-openssh-v3.9p1.strace
02-01-07 13:53 gheeres Note Added: 0002081
02-01-07 14:10 gheeres Note Added: 0002082
02-03-07 17:31 gheeres Note Added: 0002092
02-04-07 03:24 bernhardf Note Added: 0002094
02-04-07 03:24 bernhardf Status assigned => feedback
02-12-07 05:33 vapier Status feedback => assigned
02-12-07 05:33 vapier Assigned To uClibc => buildroot
======================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Buildroot] [buildroot 0000967]: SEGV when running openssh
@ 2007-09-24 9:04 bugs at busybox.net
0 siblings, 0 replies; 2+ messages in thread
From: bugs at busybox.net @ 2007-09-24 9:04 UTC (permalink / raw)
To: buildroot
The following issue has been CLOSED
======================================================================
http://busybox.net/bugs/view.php?id=967
======================================================================
Reported By: lerichi
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 967
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: closed
Resolution: open
Fixed in Version:
======================================================================
Date Submitted: 07-23-2006 14:59 PDT
Last Modified: 09-24-2007 02:04 PDT
======================================================================
Summary: SEGV when running openssh
Description:
I downloaded and did a standard build of the latest buildroot. Busybox
works just fine, but openssh and all its helpers just SEGV. Apart from
that, the other non-busybox proggies also die. So there must be a problem
with some library.
Just make a standard build (gcc-3.4.2), chroot into build_ARCH/root and
call sshd. It should die :-(
Any ideas? I have a suspicion that xstrdup() might be the cause.
Regards-
Richard
======================================================================
----------------------------------------------------------------------
bernhardf - 01-24-07 13:04
----------------------------------------------------------------------
Try to strace this and perpahs provide a simple testcase for us to
reproduce.
----------------------------------------------------------------------
gheeres - 02-01-07 13:53
----------------------------------------------------------------------
Attached strace output.
Build / configuration:
uClibc-snapshost (01/26/2007)
gcc-v4.1.1
openssh-v3.9p1
Same results attempting to use openssh-v4.5p1
If strace needs to be in different format, please provide instructions for
generating.
----------------------------------------------------------------------
gheeres - 02-01-07 14:10
----------------------------------------------------------------------
Older buildroot using:
uClibc-0.9.28 (non-snapshot)
gcc-v3.4.6
openssh-v3.9p1 or openssh-v4.5p1
Works correctly.
----------------------------------------------------------------------
gheeres - 02-03-07 17:31
----------------------------------------------------------------------
Checked out newest uClibc build (http://busybox.net/bugs/view.php?id=#02012007),
completely rebuilt entire
toolchain and build files. SSH is no longer SEGV.
----------------------------------------------------------------------
bernhardf - 02-04-07 03:24
----------------------------------------------------------------------
I consider this fixed now and shall close this issue within two weeks from
now on, unless somebody comes up to let us know that 0.9.28.1 and current
svn still has problems.
Thanks, all, for your help with testing.
----------------------------------------------------------------------
bernhardf - 09-24-07 02:04
----------------------------------------------------------------------
ssh was updated and works fine for me.
Issue History
Date Modified Username Field Change
======================================================================
07-23-06 14:59 lerichi New Issue
07-23-06 14:59 lerichi Status new => assigned
07-23-06 14:59 lerichi Assigned To => uClibc
07-27-06 04:58 thrakhath Issue Monitored: thrakhath
01-24-07 13:04 bernhardf Note Added: 0002041
02-01-07 13:50 gheeres File Added: uClibc-snapshot-openssh-v3.9p1.strace
02-01-07 13:53 gheeres Note Added: 0002081
02-01-07 14:10 gheeres Note Added: 0002082
02-03-07 17:31 gheeres Note Added: 0002092
02-04-07 03:24 bernhardf Note Added: 0002094
02-04-07 03:24 bernhardf Status assigned => feedback
02-12-07 05:33 vapier Status feedback => assigned
02-12-07 05:33 vapier Assigned To uClibc => buildroot
09-24-07 02:04 bernhardf Status assigned => closed
09-24-07 02:04 bernhardf Note Added: 0002784
======================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-09-24 9:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-24 9:04 [Buildroot] [buildroot 0000967]: SEGV when running openssh bugs at busybox.net
-- strict thread matches above, loose matches on Subject: below --
2007-02-12 13:33 bugs at busybox.net
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox