* [Buildroot] moving console traces to a specific tty
@ 2012-09-04 9:36 Emmanuel BOUAZIZ
0 siblings, 0 replies; only message in thread
From: Emmanuel BOUAZIZ @ 2012-09-04 9:36 UTC (permalink / raw)
To: buildroot
Hi,
I'm running buildroot on an atom-based board. I've activated getty on tty1 to tty4 and would like kernel traces and
others (all that is started through inittab) to show only on tty5.
For this, I've set the 'console = tty5' in the kernel parameters. Unfortunatly, some traces (the ones that are generated
when I plug or unplug an USB device) keep showing on the active tty, whichever it is.
Is there something else I can do to keep the active tty clean of traces ?
thanks,
--
Emmanuel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-09-04 9:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-04 9:36 [Buildroot] moving console traces to a specific tty Emmanuel BOUAZIZ
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox