From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] BuildRoot not starting with Udev
Date: Tue, 16 Oct 2012 20:43:11 +0200 [thread overview]
Message-ID: <507DAABF.7040602@mind.be> (raw)
In-Reply-To: <loom.20121015T104727-737@post.gmane.org>
On 15/10/12 10:55, Antoine Caurier wrote:
> Hello,
>
> I'm working on Buildroot-2012.08, with the at91sam9x5ek_defconfig.
>
> It work perfectly fine with the default configuration. But I have a problem when
> trying to activate udev.
>
> With menuconfig, I set /dev management (Dynamic using udev), and then rebuild
> the kernel and fs.
>
> All is starting fine, except for buildroot. The board stop to display anything
> just before the "Welcome to buildroot" prompt.
>
> Here are the last traces:
>
> UBIFS: mounted UBI device 0, volume 0, name "rootfs"
> UBIFS: file system size: 247603200 bytes (241800 KiB, 236 MiB, 1950 LEBs)
> UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
> UBIFS: media format: w4/r0 (latest is w4/r0)
> UBIFS: default compressor: lzo
> UBIFS: reserved for root: 0 bytes (0 KiB)
> VFS: Mounted root (ubifs filesystem) on device 0:12.
> Freeing init memory: 136K
> Starting logging: OK
> Populating /dev using udev: done
So udev starts (or at least doesn't print an error to console).
> Starting portmap: portmap: fork: No such devicedone
> ALSA: Restoring mixer settings...
> Starting network...
> /usr/sbin/alsactl: load_state:1686: No soundcards found...
> Starting dropbear sshd: generating rsa key... generating dsa key... OK
Since dropbear starts, can you log in with ssh? Then you can check if
getty is running on the (correct) serial port and if there's something
funny showing up in dmesg or /var/log/messages.
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
prev parent reply other threads:[~2012-10-16 18:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-15 8:55 [Buildroot] BuildRoot not starting with Udev Antoine Caurier
2012-10-16 17:41 ` Thomas Petazzoni
2012-10-17 11:03 ` Antoine Caurier
2012-10-17 11:07 ` Arnout Vandecappelle
2012-10-17 11:15 ` Antoine Caurier
[not found] ` <CA+mmYj34+xbUcq=jvEuTFRu_XwX3TMn1Bcv6Rwnnn17pDCewiA@mail.gmail.com>
2012-10-17 17:23 ` Thomas Petazzoni
2012-10-18 7:38 ` Antoine Caurier
2012-10-16 18:43 ` Arnout Vandecappelle [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=507DAABF.7040602@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox