From: Antoine Caurier <antoine.caurier@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] BuildRoot not starting with Udev
Date: Mon, 15 Oct 2012 08:55:00 +0000 (UTC) [thread overview]
Message-ID: <loom.20121015T104727-737@post.gmane.org> (raw)
Hello,
I'm working on Buildroot-2012.08, with the at91sam9x5ek_defconfig.
It work perfectly fine with the default configuration. But I have a problem when
trying to activate udev.
With menuconfig, I set /dev management (Dynamic using udev), and then rebuild
the kernel and fs.
All is starting fine, except for buildroot. The board stop to display anything
just before the "Welcome to buildroot" prompt.
Here are the last traces:
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 247603200 bytes (241800 KiB, 236 MiB, 1950 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:12.
Freeing init memory: 136K
Starting logging: OK
Populating /dev using udev: done
Starting portmap: portmap: fork: No such devicedone
ALSA: Restoring mixer settings...
Starting network...
/usr/sbin/alsactl: load_state:1686: No soundcards found...
Starting dropbear sshd: generating rsa key... generating dsa key... OK
Any ideas on what can causes my trouble?
Thx
next reply other threads:[~2012-10-15 8:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-15 8:55 Antoine Caurier [this message]
2012-10-16 17:41 ` [Buildroot] BuildRoot not starting with Udev Thomas Petazzoni
2012-10-17 11:03 ` Antoine Caurier
2012-10-17 11:07 ` Arnout Vandecappelle
2012-10-17 11:15 ` Antoine Caurier
[not found] ` <CA+mmYj34+xbUcq=jvEuTFRu_XwX3TMn1Bcv6Rwnnn17pDCewiA@mail.gmail.com>
2012-10-17 17:23 ` Thomas Petazzoni
2012-10-18 7:38 ` Antoine Caurier
2012-10-16 18:43 ` Arnout Vandecappelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20121015T104727-737@post.gmane.org \
--to=antoine.caurier@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox