[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Michael Stieler]

hi,

we are using buildroot for arm development. we are migrating from 
arm926t to AM3358 and AM3359.

i was hoping to continue to use buildroot for the processors, but i 
cannot build the right compiler for these 2.

in make menuconfig i choose:

target architecture ARM (big endian)
target architecture variant cortex-a8        # for sitara am3358 cortex a8 ?
toolchain ->  Kernel headers 3.2.x
package selection for target -> network applications --> X wireless 
tools --> X install shared library

i need the wireless tools library. liw

any suggestions ?

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Thomas Petazzoni]

Dear Michael Stieler,

On Thu, 25 Oct 2012 19:42:26 +0200, Michael Stieler wrote:

> we are using buildroot for arm development. we are migrating from 
> arm926t to AM3358 and AM3359.
> 
> i was hoping to continue to use buildroot for the processors, but i 
> cannot build the right compiler for these 2.
> 
> in make menuconfig i choose:
> 
> target architecture ARM (big endian)
> target architecture variant cortex-a8        # for sitara am3358
> cortex a8 ? toolchain ->  Kernel headers 3.2.x
> package selection for target -> network applications --> X wireless 
> tools --> X install shared library

Please send a .config, a vague explanation about your configurations is
not sufficient for us to understand what you've done.

> i need the wireless tools library. liw
> 
> any suggestions ?

Sorry, but you're not explaining what your problem is. What are you
trying to achieve?

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Baruch Siach]

Hi Michael,

On Thu, Oct 25, 2012 at 07:42:26PM +0200, Michael Stieler wrote:
> we are using buildroot for arm development. we are migrating from
> arm926t to AM3358 and AM3359.
> 
> i was hoping to continue to use buildroot for the processors, but i
> cannot build the right compiler for these 2.
> 
> in make menuconfig i choose:
> 
> target architecture ARM (big endian)

Why big endian? As far as I know all TI SoCs (as almost all ARM SoCs) are 
little endian.

baruch

> target architecture variant cortex-a8        # for sitara am3358 cortex a8 ?
> toolchain ->  Kernel headers 3.2.x
> package selection for target -> network applications --> X wireless
> tools --> X install shared library
> 
> i need the wireless tools library. liw
> 
> any suggestions ?

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Peter Korsgaard]

>>>>> "Baruch" == Baruch Siach <baruch@tkos.co.il> writes:

 Baruch> Hi Michael,
 Baruch> On Thu, Oct 25, 2012 at 07:42:26PM +0200, Michael Stieler wrote:
 >> we are using buildroot for arm development. we are migrating from
 >> arm926t to AM3358 and AM3359.
 >> 
 >> i was hoping to continue to use buildroot for the processors, but i
 >> cannot build the right compiler for these 2.
 >> 
 >> in make menuconfig i choose:
 >> 
 >> target architecture ARM (big endian)

 Baruch> Why big endian? As far as I know all TI SoCs (as almost all ARM
 Baruch> SoCs) are little endian.

Indeed. We already have a beaglebone (am3358) defconfig
(configs/beaglebone_defconfig).

-- 
Bye, Peter Korsgaard

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Jürgen Benjamin Ronshausen]

hi everybody.

i am developing wireless tracking software. i use the wireless-tools
library to scan for wireless networks in the area.

i hope to use buildroot for compiling the c program, and to handle the
library part. my program includes  #include <iwlib.h>.

on my old board (arm926t) i could compile by 
~/buildroot-2012.08/output/host/usr/bin/arm-linux-gcc -Wall -o
"oldboard" "main.c" -liw

The new Board is a AM335x Starter Kit with a Sitara AM3358 Cortex A8 cpu
and WL1271 Wifi/bluetooth module.

to make my toolchain i issue:

make beaglebone_defconfig
make menuconfig and select under packages, networking wireless-tools and
library. i included contents of .config below.

The first problem is, that there are no files in
/home/john/AM335/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib
i am not sure about it, but i think there should be the .so files for
the compiler.

this is the processor in question

root at am335x-evm:~# cat /proc/cpuinfo 
Processor	: ARMv7 Processor rev 2 (v7l)
BogoMIPS	: 718.02
Features	: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x3
CPU part	: 0xc08
CPU revision	: 2

Hardware	: am335xevm
Revision	: 0000
Serial		: 0000000000000000


here is my .config

#
# Automatically generated make config: don't edit
# Buildroot 2012.11-git-00490-g75b9e7f-dirty Configuration
#
BR2_HAVE_DOT_CONFIG=y
BR2_arm=y
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_bfin is not set
# BR2_i386 is not set
# BR2_microblazeel is not set
# BR2_microblazebe is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_mips64 is not set
# BR2_mips64el is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_x86_64 is not set
# BR2_generic_arm is not set
# BR2_arm7tdmi is not set
# BR2_arm610 is not set
# BR2_arm710 is not set
# BR2_arm720t is not set
# BR2_arm920t is not set
# BR2_arm922t is not set
# BR2_arm926t is not set
# BR2_arm10t is not set
# BR2_arm1136jf_s is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set
BR2_cortex_a8=y
# BR2_cortex_a9 is not set
# BR2_sa110 is not set
# BR2_sa1100 is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
BR2_ARM_EABI=y
# BR2_ARM_OABI is not set
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="cortex-a8"
BR2_GCC_TARGET_ARCH="armv7-a"
BR2_GCC_TARGET_ABI="aapcs-linux"

#
# Build options
#

#
# Commands
#
BR2_WGET="wget --passive-ftp -nd -t 3"
BR2_SVN="svn"
BR2_BZR="bzr"
BR2_GIT="git"
BR2_LOCALFILES="cp"
BR2_SCP="scp"
BR2_SSH="ssh"
BR2_HG="hg"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_XZCAT="xzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_HOST_DIR="$(BASE_DIR)/host"

#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://sources.buildroot.net/"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
BR2_JLEVEL=0
# BR2_CCACHE is not set
# BR2_DEPRECATED is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
BR2_STRIP_EXCLUDE_FILES=""
BR2_STRIP_EXCLUDE_DIRS=""
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set
BR2_PACKAGE_OVERRIDE_FILE="$(TOPDIR)/local.mk"

#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_CTNG is not set

#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_3_0 is not set
# BR2_KERNEL_HEADERS_3_1 is not set
# BR2_KERNEL_HEADERS_3_2 is not set
# BR2_KERNEL_HEADERS_3_3 is not set
# BR2_KERNEL_HEADERS_3_4 is not set
# BR2_KERNEL_HEADERS_3_5 is not set
BR2_KERNEL_HEADERS_3_6=y
# BR2_KERNEL_HEADERS_VERSION is not set
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="3.6.4"

#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_31 is not set
# BR2_UCLIBC_VERSION_0_9_32 is not set
BR2_UCLIBC_VERSION_0_9_33=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.33.2"
BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.33.config"
# BR2_PTHREAD_DEBUG is not set
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
BR2_UCLIBC_ARM_TYPE="ARM_CORTEXA8"

#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_20 is not set
# BR2_BINUTILS_VERSION_2_20_1 is not set
# BR2_BINUTILS_VERSION_2_21 is not set
BR2_BINUTILS_VERSION_2_21_1=y
# BR2_BINUTILS_VERSION_2_22 is not set
# BR2_BINUTILS_VERSION_2_23 is not set
BR2_BINUTILS_VERSION="2.21.1"
BR2_BINUTILS_EXTRA_CONFIG_OPTIONS=""

#
# GCC Options
#
# BR2_GCC_VERSION_4_4_X is not set
# BR2_GCC_VERSION_4_5_X is not set
BR2_GCC_VERSION_4_6_X=y
# BR2_GCC_VERSION_4_7_X is not set
# BR2_GCC_VERSION_SNAP is not set
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.6.3"
BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-fpu=vfpv3 --with-float=hard"
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y
BR2_GCC_ENABLE_TLS=y
# BR2_GCC_ENABLE_OPENMP is not set

#
# Gdb Options
#

#
# Gdb debugger for the target needs WCHAR support in toolchain
#
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set
BR2_TOOLCHAIN_HAS_THREADS=y
BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED=y
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y
# BR2_ENABLE_LOCALE_PURGE is not set
BR2_GENERATE_LOCALE=""
BR2_NEEDS_GETTEXT=y
BR2_USE_MMU=y
BR2_PREFER_SOFT_FLOAT=y
# BR2_SOFT_FLOAT is not set
BR2_TARGET_OPTIMIZATION="-pipe"
BR2_TARGET_LDFLAGS=""

#
# Toolchain Options
#
# BR2_TOOLCHAIN_BUILDROOT_LARGEFILE is not set
# BR2_TOOLCHAIN_BUILDROOT_INET_IPV6 is not set
# BR2_TOOLCHAIN_BUILDROOT_INET_RPC is not set
# BR2_TOOLCHAIN_BUILDROOT_WCHAR is not set
# BR2_TOOLCHAIN_BUILDROOT_LOCALE is not set
# BR2_TOOLCHAIN_BUILDROOT_CXX is not set
# BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
# BR2_PTHREADS_OLD is not set
BR2_PTHREADS_NATIVE=y
# BR2_ELF2FLT is not set
# BR2_VFP_FLOAT is not set

#
# System configuration
#
BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot"
# BR2_ROOTFS_DEVICE_CREATION_STATIC is not set
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set

#
# udev requires a toolchain with LARGEFILE + WCHAR support
#
BR2_INIT_BUSYBOX=y
# BR2_INIT_SYSV is not set

#
# systemd requires largefile, wchar, IPv6, threads and udev support
#
# BR2_INIT_NONE is not set
BR2_ROOTFS_DEVICE_TABLE="target/generic/device_table.txt"
BR2_ROOTFS_SKELETON_DEFAULT=y
# BR2_ROOTFS_SKELETON_CUSTOM is not set
BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set
BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200"
# BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set
BR2_ROOTFS_POST_BUILD_SCRIPT=""

#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_19_X is not set
BR2_BUSYBOX_VERSION_1_20_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.20.2"
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.20.x.config"
# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
# BR2_PACKAGE_BUSYBOX_WATCHDOG is not set

#
# Audio and video applications
#

#
# alsa-utils requires a toolchain with LARGEFILE and threads support
#
# BR2_PACKAGE_AUMIX is not set

#
# bellagio requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_FAAD2 is not set
# BR2_PACKAGE_FLAC is not set

#
# ffmpeg requires a toolchain with LARGEFILE and IPV6 support
#

#
# gstreamer requires a toolchain with WCHAR support
#

#
# gst-ffmpeg requires a toolchain with LARGEFILE and IPV6 support
#
# BR2_PACKAGE_LAME is not set
# BR2_PACKAGE_MADPLAY is not set

#
# mpd requires a toolchain with C++ and WCHAR support
#
# BR2_PACKAGE_MPG123 is not set

#
# mplayer requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_MUSEPACK is not set
# BR2_PACKAGE_OPUS_TOOLS is not set

#
# pulseaudio requires a toolchain with WCHAR support
#
# BR2_PACKAGE_TIDSP_BINARIES is not set
# BR2_PACKAGE_VORBIS_TOOLS is not set
# BR2_PACKAGE_WAVPACK is not set

#
# Compressors and decompressors
#
# BR2_PACKAGE_BZIP2 is not set
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_XZ is not set

#
# Debugging, profiling and benchmark
#

#
# bonnie++ requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_DHRYSTONE is not set

#
# dstat requires a toolchain with WCHAR support
#
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_KEXEC is not set

#
# latencytop requires a toolchain with WCHAR support
#

#
# lmbench requires a toolchain with RPC support
#
# BR2_PACKAGE_LTP_TESTSUITE is not set
# BR2_PACKAGE_LTTNG_MODULES is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NETPERF is not set

#
# oprofile requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_RAMSPEED is not set
# BR2_PACKAGE_RT_TESTS is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_STRESS is not set

#
# sysprof requires a toolchain with WCHAR support
#
# BR2_PACKAGE_WHETSTONE is not set
# BR2_PACKAGE_VALGRIND is not set
# BR2_PACKAGE_PV is not set

#
# Development tools
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BINUTILS is not set

#
# bison requires a toolchain with WCHAR support
#
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CCACHE is not set

#
# cvs requires a toolchain with WCHAR support
#
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_FLEX is not set

#
# gcc needs development files in target filesystem
#

#
# gettext requires a toolchain with WCHAR support
#
# BR2_PACKAGE_GMP is not set

#
# gperf requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_MPC is not set
# BR2_PACKAGE_MPFR is not set
# BR2_PACKAGE_LIBTOOL is not set

#
# m4 requires a toolchain with WCHAR support
#
# BR2_PACKAGE_PKGCONF is not set
# BR2_PACKAGE_SSTRIP is not set

#
# vala requires a toolchain with WCHAR support
#

#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_PRBOOM is not set

#
# Graphic libraries and applications (graphic/text)
#

#
# Graphic applications
#

#
# rrdtool requires a toolchain with WCHAR support
#

#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_FBGRAB is not set

#
# fbterm requires a toolchain with C++, WCHAR and locale support
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FB_TEST_APP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_LINUX_FUSION is not set
# BR2_PACKAGE_SDL is not set

#
# other GUIs
#

#
# EFL requires WCHAR support in toolchain
#

#
# qt requires a toolchain with C++ support enabled
#

#
# X.org requires a toolchain with WCHAR support
#

#
# X libraries and helper libraries
#
# BR2_PACKAGE_LIBERATION is not set

#
# X Window managers
#

#
# X applications
#

#
# gob2 requires a toolchain with WCHAR support
#

#
# midori requires C++, WCHAR in toolchain and libgtk2
#

#
# Filesystem utilities
#
# BR2_PACKAGE_CIFS_UTILS is not set
# BR2_PACKAGE_CRAMFS is not set

#
# dosfstools requires a toolchain with LARGEFILE support
#

#
# e2fsprogs requires a toolchain with LARGEFILE + WCHAR support
#

#
# genext2fs requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_GENROMFS is not set
# BR2_PACKAGE_MAKEDEVS is not set
# BR2_PACKAGE_MTD is not set

#
# nfs-utils requires a toolchain with RPC and LARGEFILE support
#

#
# ntfs-3g requires a toolchain with LARGEFILE and WCHAR support
#

#
# squashfs requires a toolchain with LARGEFILE and threads support
#

#
# sshfs requires a toolchain with LARGEFILE and WCHAR support
#

#
# unionfs requires a toolchain with LARGEFILE support
#

#
# xfsprogs requires a toolchain with LARGEFILE + WCHAR support
#

#
# Hardware handling
#

#
# cdrkit requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_DBUS is not set

#
# dmraid requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_EVTEST is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_FMTOOLS is not set
# BR2_PACKAGE_GADGETFS_TEST is not set

#
# gdisk requires a toolchain with LARGEFILE/WCHAR/C++ support enabled
#
# BR2_PACKAGE_GPSD is not set

#
# gvfs requires a toolchain with LARGEFILE and WCHAR support
#
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_EVENT_DAEMON is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_IRDA_UTILS is not set
# BR2_PACKAGE_KBD is not set
# BR2_PACKAGE_LCDPROC is not set
# BR2_PACKAGE_LINUX_FIRMWARE is not set
# BR2_PACKAGE_LM_SENSORS is not set

#
# lshw requires a toolchain with C++, LARGEFILE & WCHAR support enabled
#
# BR2_PACKAGE_LSUIO is not set

#
# lvm2 requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_MDADM is not set

#
# memtester requires a toolchain with LARGEFILE support
#

#
# minicom requires a toolchain with WCHAR support
#
# BR2_PACKAGE_NANOCOM is not set

#
# ofono requires a toolchain with WCHAR and thread support
#
# BR2_PACKAGE_OPEN2300 is not set
# BR2_PACKAGE_OPENOCD is not set

#
# owl-linux is only supported on ARM9 architecture with EABI
#

#
# parted requires a toolchain with LARGEFILE+WCHAR support
#
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_PICOCOM is not set
# BR2_PACKAGE_RNG_TOOLS is not set
# BR2_PACKAGE_SANE_BACKENDS is not set
# BR2_PACKAGE_SDPARM is not set
# BR2_PACKAGE_SETSERIAL is not set

#
# smartmontools requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_SREDIRD is not set
# BR2_PACKAGE_STATSERIAL is not set
# BR2_PACKAGE_SYSSTAT is not set
# BR2_PACKAGE_TI_UTILS is not set
# BR2_PACKAGE_UBOOT_TOOLS is not set

#
# udev requires /dev mgmnt set to udev under System configuration
#
# BR2_PACKAGE_USB_MODESWITCH is not set
# BR2_PACKAGE_USB_MODESWITCH_DATA is not set
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set

#
# Interpreter languages and scripting
#
# BR2_PACKAGE_ERLANG is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_LUAJIT is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PHP is not set

#
# python requires a toolchain with WCHAR support
#

#
# ruby requires a toolchain with WCHAR support
#
# BR2_PACKAGE_TCL is not set

#
# Libraries
#

#
# Audio/Sound
#
# BR2_PACKAGE_ALSA_LIB is not set

#
# audiofile requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBAO is not set
# BR2_PACKAGE_LIBCDAUDIO is not set
# BR2_PACKAGE_LIBCUE is not set
# BR2_PACKAGE_LIBCUEFILE is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBLO is not set
# BR2_PACKAGE_LIBMAD is not set

#
# libmpd requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBREPLAYGAIN is not set
# BR2_PACKAGE_LIBSAMPLERATE is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_OPUS is not set
# BR2_PACKAGE_PORTAUDIO is not set
# BR2_PACKAGE_SPEEX is not set

#
# taglib requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_TREMOR is not set

#
# webrtc-audio-processing requires a toolchain with C++ support enabled
#

#
# Compression and decompression
#

#
# libarchive requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LZO is not set
# BR2_PACKAGE_ZLIB is not set

#
# Crypto
#
# BR2_PACKAGE_BEECRYPT is not set

#
# gnutls requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_OCF_LINUX is not set
# BR2_PACKAGE_OPENSSL is not set
# BR2_PACKAGE_POLARSSL is not set

#
# Database
#
# BR2_PACKAGE_BERKELEYDB is not set

#
# Mysql client requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_SQLCIPHER is not set
# BR2_PACKAGE_SQLITE is not set

#
# Filesystem
#

#
# gamin requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set

#
# libfuse requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBSYSFS is not set

#
# Graphics
#

#
# atk requires a toolchain with WCHAR support
#
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_IMLIB2 is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_LIBDMTX is not set
# BR2_PACKAGE_LIBEXIF is not set
# BR2_PACKAGE_LIBGEOTIFF is not set

#
# libgtk2 requires a toolchain with WCHAR and C++ support
#
# BR2_PACKAGE_LIBPNG is not set

#
# libraw requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBSVGTINY is not set
# BR2_PACKAGE_LIBUNGIF is not set

#
# opencv requires a toolchain with C++ and WCHAR support
#

#
# pango requires a toolchain with WCHAR and C++ support
#
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_TIFF is not set

#
# webkit requires C++, WCHAR in toolchain and libgtk2
#

#
# zxing requires a toolchain with C++ support
#

#
# Hardware handling
#
# BR2_PACKAGE_CCID is not set

#
# lcdapi requires a toolchain with C++ and thread support enabled
#
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_TSLIB is not set
# BR2_PACKAGE_LIBFREEFARE is not set
# BR2_PACKAGE_LIBFTDI is not set
# BR2_PACKAGE_LIBHID is not set
# BR2_PACKAGE_LIBIQRF is not set
# BR2_PACKAGE_LIBNFC is not set
# BR2_PACKAGE_LIBNFC_LLCP is not set
# BR2_PACKAGE_LIBUSB is not set

#
# libv4l requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_MTDEV is not set
# BR2_PACKAGE_PCSC_LITE is not set

#
# Javascript
#
# BR2_PACKAGE_EXPLORERCANVAS is not set
# BR2_PACKAGE_FLOT is not set
# BR2_PACKAGE_JQUERY is not set
# BR2_PACKAGE_JQUERY_SPARKLINE is not set
# BR2_PACKAGE_JQUERY_VALIDATION is not set
# BR2_PACKAGE_JSMIN is not set

#
# Multimedia
#

#
# libdvdread requires a toolchain with LARGEFILE support
#

#
# libdvdnav requires a toolchain with LARGEFILE support
#

#
# libmms requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBMPEG2 is not set
# BR2_PACKAGE_LIBOGG is not set

#
# libplayer requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBTHEORA is not set

#
# Live555 needs C++ compiler
#

#
# mediastreamer requires a toolchain with C++ support enabled
#

#
# Networking
#

#
# glib-networking requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBCGI is not set

#
# libcgicc requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBESMTP is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBFCGI is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBOAUTH is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
# BR2_PACKAGE_NEON is not set

#
# libmnl requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBMODBUS is not set
# BR2_PACKAGE_LIBMBUS is not set
# BR2_PACKAGE_LIBNETFILTER_CONNTRACK is not set

#
# libnetfilter_cttimout requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBNFNETLINK is not set
# BR2_PACKAGE_LIBNL is not set

#
# liboping requires a toolchain with IPv6 support enabled
#
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBRSYNC is not set

#
# libsoup requires a toolchain with WCHAR support
#

#
# libtorrent requires a toolchain with C++ support enabled
#

#
# libupnp requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBVNCSERVER is not set
# BR2_PACKAGE_ORTP is not set

#
# zeromq requires a toolchain with C++, LARGEFILE + WCHAR support
#

#
# Other
#
# BR2_PACKAGE_APR is not set
# BR2_PACKAGE_APR_UTIL is not set
# BR2_PACKAGE_FFTW is not set
# BR2_PACKAGE_LIBARGTABLE2 is not set
# BR2_PACKAGE_ARGP_STANDALONE is not set

#
# boost requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBATOMIC_OPS is not set
# BR2_PACKAGE_LIBCAP is not set
# BR2_PACKAGE_LIBCAP_NG is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBEV is not set
# BR2_PACKAGE_LIBFFI is not set
# BR2_PACKAGE_GSL is not set

#
# libglib2 requires a toolchain with WCHAR support
#

#
# libical requires a toolchain with WCHAR support
#

#
# libsigc++ requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBTPL is not set
# BR2_PACKAGE_LIBURCU is not set

#
# linux-pam requires a toolchain with WCHAR and locale support
#

#
# lttng-libust needs WCHAR and LARGEFILE support
#
# BR2_PACKAGE_MTDEV2TUIO is not set
# BR2_PACKAGE_ORC is not set

#
# poco requires a toolchain with WCHAR and C++ support
#

#
# protobuf requires a toolchain with C++ support enabled
#

#
# schifra requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBLOG4C_LOCALTIME is not set

#
# Text and terminal handling
#

#
# enchant requires a toolchain with C++ and WCHAR support enabled
#

#
# icu requires a toolchain with C++ support and WCHAR enabled
#
# BR2_PACKAGE_LIBICONV is not set
# BR2_PACKAGE_NCURSES is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_PCRE is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_SLANG is not set

#
# JSON/XML
#
# BR2_PACKAGE_CJSON is not set
# BR2_PACKAGE_EXPAT is not set
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_JSON_C is not set
# BR2_PACKAGE_LIBROXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set
# BR2_PACKAGE_LIBYAML is not set
# BR2_PACKAGE_MXML is not set

#
# xerces-c++ requires a toolchain with C++ and WCHAR support enabled
#
# BR2_PACKAGE_YAJL is not set

#
# Miscellaneous
#
# BR2_PACKAGE_COLLECTD is not set
# BR2_PACKAGE_EMPTY is not set
# BR2_PACKAGE_GOOGLEFONTDIRECTORY is not set
# BR2_PACKAGE_MOBILE_BROADBAND_PROVIDER_INFO is not set

#
# shared-mime-info requires a toolchain with WCHAR support
#
# BR2_PACKAGE_SOUND_THEME_BOREALIS is not set
# BR2_PACKAGE_SOUND_THEME_FREEDESKTOP is not set

#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set

#
# bluez-utils require a toolchain with WCHAR and thread support
#

#
# bind requires a toolchain with LARGEFILE and IPV6 support
#

#
# bmon requires a toolchain with IPv6 support
#
# BR2_PACKAGE_BRIDGE_UTILS is not set
# BR2_PACKAGE_CAN_UTILS is not set

#
# connman needs a toolchain with IPv6, WCHAR, thread and resolver
support
#

#
# ctorrent requires a toolchain with C++ support enabled
#

#
# conntrack-tools requires a toolchain with IPV6 and LARGEFILE support
#
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set

#
# ebtables requires a toolchain with IPv6 support
#
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HEIRLOOM_MAILX is not set
# BR2_PACKAGE_HOSTAPD is not set
# BR2_PACKAGE_IGH_ETHERCAT is not set
# BR2_PACKAGE_INADYN is not set

#
# iperf requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_IPROUTE2 is not set
# BR2_PACKAGE_IPSEC_TOOLS is not set

#
# ipset requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_IW is not set

#
# Kismet requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LINKS is not set

#
# linphone requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MACCHANGER is not set
# BR2_PACKAGE_MII_DIAG is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MSMTP is not set

#
# mutt requires a toolchain with WCHAR support
#

#
# nbd requires a toolchain with WCHAR support
#
# BR2_PACKAGE_NCFTP is not set

#
# ndisc6 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_NETATALK is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set

#
# NetworkManager requires a toolchain with IPV6, LARGEFILE, WCHAR and
thread support
#
# BR2_PACKAGE_NOIP is not set
# BR2_PACKAGE_NGIRCD is not set
# BR2_PACKAGE_NGREP is not set
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_NUTTCP is not set

#
# olsr requires a toolchain with IPv6 support
#
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENSWAN is not set
# BR2_PACKAGE_OPENVPN is not set

#
# portmap requires a toolchain with RPC support
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set

#
# radvd requires a toolchain with IPV6 support
#
# BR2_PACKAGE_RSH_REDONE is not set
# BR2_PACKAGE_RSYNC is not set

#
# rtorrent requires a toolchain with C++ and WCHAR support
#
# BR2_PACKAGE_SAMBA is not set

#
# sconeserver requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_SER2NET is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SOCKETCAND is not set
# BR2_PACKAGE_SPAWN_FCGI is not set

#
# Squid requires a toolchain with C++ and IPv6 support enabled
#
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_TCPREPLAY is not set
# BR2_PACKAGE_TN5250 is not set

#
# Transmission requires a toolchain with IPv6 support
#

#
# udpcast requires a toolchain with LARGEFILE support
#

#
# ushare requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
BR2_PACKAGE_WIRELESS_TOOLS=y
BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
# BR2_PACKAGE_WPA_SUPPLICANT is not set
# BR2_PACKAGE_XINETD is not set
# BR2_PACKAGE_XL2TP is not set

#
# Package managers
#
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_OPKG is not set

#
# Real-Time
#
# BR2_PACKAGE_XENOMAI is not set

#
# Shell and utilities
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_DIALOG is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GNUPG is not set

#
# inotify-tools requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LOCKFILE_PROGS is not set

#
# logrotate requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LOGSURFER is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SUDO is not set
# BR2_PACKAGE_XMLSTARLET is not set

#
# System tools
#

#
# acl requires a toolchain with LARGEFILE support
#

#
# attr requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_BWM_NG is not set
# BR2_PACKAGE_CPULOAD is not set
# BR2_PACKAGE_HTOP is not set
# BR2_PACKAGE_KMOD is not set
# BR2_PACKAGE_MONIT is not set

#
# quota requires a toolchain with RPC + LARGEFILE + WCHAR support
#

#
# supervisor needs the python interpreter
#

#
# systemd not available (depends on /dev management with udev and ipv6
support, and thread support in toolchain)
#

#
# util-linux requires a toolchain with LARGEFILE + WCHAR support
#
# BR2_PACKAGE_DSP_TOOLS is not set

#
# Text editors and viewers
#
# BR2_PACKAGE_ED is not set
# BR2_PACKAGE_NANO is not set
# BR2_PACKAGE_UEMACS is not set

#
# Host utilities
#
# BR2_PACKAGE_HOST_DFU_UTIL is not set
# BR2_PACKAGE_HOST_LPC3250LOADER is not set
# BR2_PACKAGE_HOST_OMAP_U_BOOT_UTILS is not set
# BR2_PACKAGE_HOST_OPENOCD is not set
# BR2_PACKAGE_HOST_SAM_BA is not set
# BR2_PACKAGE_HOST_UBOOT_TOOLS is not set

#
# Filesystem images
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set

#
# Bootloaders
#
# BR2_TARGET_BAREBOX is not set
# BR2_TARGET_MXS_BOOTLETS is not set
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="am335x_evm"
BR2_TARGET_UBOOT_2012_10=y
# BR2_TARGET_UBOOT_2012_07 is not set
# BR2_TARGET_UBOOT_2012_04 is not set
# BR2_TARGET_UBOOT_2011_12 is not set
# BR2_TARGET_UBOOT_CUSTOM_TARBALL is not set
# BR2_TARGET_UBOOT_CUSTOM_GIT is not set
BR2_TARGET_UBOOT_VERSION="2012.10"
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR=""
# BR2_TARGET_UBOOT_FORMAT_AIS is not set
# BR2_TARGET_UBOOT_FORMAT_BIN is not set
BR2_TARGET_UBOOT_FORMAT_IMG=y
# BR2_TARGET_UBOOT_FORMAT_NAND_BIN is not set
# BR2_TARGET_UBOOT_FORMAT_KWB is not set
# BR2_TARGET_UBOOT_NETWORK is not set
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="MLO"
# BR2_TARGET_XLOADER is not set

#
# Kernel
#
BR2_LINUX_KERNEL=y
# BR2_LINUX_KERNEL_3_6 is not set
# BR2_LINUX_KERNEL_SAME_AS_HEADERS is not set
# BR2_LINUX_KERNEL_CUSTOM_VERSION is not set
# BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git"
BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="linux-ti33x-psp-3.2-r5a
+gitr09e9651bcf2ee8d86685f2a8075bc6557b1d3b91"
BR2_LINUX_KERNEL_VERSION="linux-ti33x-psp-3.2-r5a
+gitr09e9651bcf2ee8d86685f2a8075bc6557b1d3b91"
BR2_LINUX_KERNEL_PATCH=""
# BR2_LINUX_KERNEL_USE_DEFCONFIG is not set
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.2.9.config"
BR2_LINUX_KERNEL_UBOOT_IMAGE=y
BR2_LINUX_KERNEL_UIMAGE=y
# BR2_LINUX_KERNEL_APPENDED_UIMAGE is not set
# BR2_LINUX_KERNEL_ZIMAGE is not set
# BR2_LINUX_KERNEL_APPENDED_ZIMAGE is not set
# BR2_LINUX_KERNEL_VMLINUX is not set
# BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM is not set
# BR2_LINUX_KERNEL_DTS_SUPPORT is not set
# BR2_LINUX_KERNEL_INSTALL_TARGET is not set

#
# Linux Kernel Extensions
#
# BR2_LINUX_KERNEL_EXT_XENOMAI is not set
# BR2_LINUX_KERNEL_EXT_OCF_LINUX is not set
# BR2_LINUX_KERNEL_EXT_RTAI is not set

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Thomas Petazzoni]

On Tue, 30 Oct 2012 12:35:54 +0100, J?rgen Benjamin Ronshausen wrote:

> The new Board is a AM335x Starter Kit with a Sitara AM3358 Cortex A8 cpu
> and WL1271 Wifi/bluetooth module.
> 
> to make my toolchain i issue:
> 
> make beaglebone_defconfig
> make menuconfig and select under packages, networking wireless-tools and
> library. i included contents of .config below.
> 
> The first problem is, that there are no files in
> /home/john/AM335/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib
> i am not sure about it, but i think there should be the .so files for
> the compiler.

Strange. Can you do:

	make clean
	make 2>&1 | tee logfile1
	find output/host > logfile2

Post logfile1 and logfile2 to some pastebin site (pastebin.com for
example), and give us the pastebin URLs.

Thanks,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Jürgen Benjamin Ronshausen]

On Tue, 2012-10-30 at 23:13 +0100, Thomas Petazzoni wrote:
> On Tue, 30 Oct 2012 12:35:54 +0100, J?rgen Benjamin Ronshausen wrote:
> 
> > The new Board is a AM335x Starter Kit with a Sitara AM3358 Cortex A8 cpu
> > and WL1271 Wifi/bluetooth module.
> > 
> > to make my toolchain i issue:
> > 
> > make beaglebone_defconfig
> > make menuconfig and select under packages, networking wireless-tools and
> > library. i included contents of .config below.
> > 
> > The first problem is, that there are no files in
> > /home/john/AM335/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib
> > i am not sure about it, but i think there should be the .so files for
> > the compiler.
> 
> Strange. Can you do:
> 
> 	make clean
> 	make 2>&1 | tee logfile1
> 	find output/host > logfile2
> 
> Post logfile1 and logfile2 to some pastebin site (pastebin.com for
> example), and give us the pastebin URLs.
> 
> Thanks,
> 
> Thomas

logfile1's size is 3MB, to big for pastebin, so i uploaded both to
github

https://github.com/steven11/the-hunt-for-wireless-tools

Here is logfile2 http://pastebin.com/picSMVL8

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Arnout Vandecappelle]

On 10/31/12 12:30, J?rgen Benjamin Ronshausen wrote:
> logfile1's size is 3MB, to big for pastebin, so i uploaded both to
> github
>
> https://github.com/steven11/the-hunt-for-wireless-tools

  gcc-intermediate's config thinks that largefile is enabled...  Can you post
output/toolchain/gcc-4.6.3-intermediate/gcc/config.status, config.log and
auto-host.h?

  BTW what kind of build machine do you use?

  Regards,
  Arnout
-- 
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Jürgen Benjamin Ronshausen]

sorry it took me so long.

regards J?rgen

output/toolchain/gcc-4.6.3-intermediate/gcc/config.status

http://pastebin.com/fLGkJmKi

config.log

http://pastebin.com/WEZd2w7n

auto-host.h

http://pastebin.com/sJZXZvAN

On Thu, 2012-11-01 at 00:06 +0100, Arnout Vandecappelle wrote:
> On 10/31/12 12:30, J?rgen Benjamin Ronshausen wrote:
> > logfile1's size is 3MB, to big for pastebin, so i uploaded both to
> > github
> >
> > https://github.com/steven11/the-hunt-for-wireless-tools
> 
>   gcc-intermediate's config thinks that largefile is enabled...  Can you post
> output/toolchain/gcc-4.6.3-intermediate/gcc/config.status, config.log and
> auto-host.h?
> 
>   BTW what kind of build machine do you use?
> 
>   Regards,
>   Arnout

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Arnout Vandecappelle]

  Hi Juergen,

  I'm sorry, but I haven't been able to pinpoint the core issue - except that it
looks like gcc is using the host configuration to build crt0, which seems odd.
This code has changed a lot in gcc 4.7, so maybe you can try that?

  Regards,
  Arnout


On 11/07/12 12:04, J?rgen Benjamin Ronshausen wrote:
> sorry it took me so long.
>
> regards J?rgen
>
> output/toolchain/gcc-4.6.3-intermediate/gcc/config.status
>
> http://pastebin.com/fLGkJmKi
>
> config.log
>
> http://pastebin.com/WEZd2w7n
>
> auto-host.h
>
> http://pastebin.com/sJZXZvAN
>
> On Thu, 2012-11-01 at 00:06 +0100, Arnout Vandecappelle wrote:
>> On 10/31/12 12:30, J?rgen Benjamin Ronshausen wrote:
>>> logfile1's size is 3MB, to big for pastebin, so i uploaded both to
>>> github
>>>
>>> https://github.com/steven11/the-hunt-for-wireless-tools
>>
>>    gcc-intermediate's config thinks that largefile is enabled...  Can you post
>> output/toolchain/gcc-4.6.3-intermediate/gcc/config.status, config.log and
>> auto-host.h?
>>
>>    BTW what kind of build machine do you use?
>>
>>    Regards,
>>    Arnout
>
>
>

-- 
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

[Buildroot] buildroot for AM3358 AM3359 with wireless-tools shared library

[Thomas Petazzoni]

Dear J?rgen Benjamin Ronshausen,

On Tue, 30 Oct 2012 12:35:54 +0100, J?rgen Benjamin Ronshausen wrote:

> i am developing wireless tracking software. i use the wireless-tools
> library to scan for wireless networks in the area.
> 
> i hope to use buildroot for compiling the c program, and to handle the
> library part. my program includes  #include <iwlib.h>.
> 
> on my old board (arm926t) i could compile by 
> ~/buildroot-2012.08/output/host/usr/bin/arm-linux-gcc -Wall -o
> "oldboard" "main.c" -liw
> 
> The new Board is a AM335x Starter Kit with a Sitara AM3358 Cortex A8 cpu
> and WL1271 Wifi/bluetooth module.
> 
> to make my toolchain i issue:
> 
> make beaglebone_defconfig
> make menuconfig and select under packages, networking wireless-tools and
> library. i included contents of .config below.
> 
> The first problem is, that there are no files in
> /home/john/AM335/buildroot/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib
> i am not sure about it, but i think there should be the .so files for
> the compiler.

The problem you reported at
https://raw.github.com/steven11/the-hunt-for-wireless-tools/master/logfile1
was fixed in the current Git repository of Buildroot. It was a problem
on 32 bits hosts while building a toolchain with largefile support
disabled.

The commit fixing it is
http://git.buildroot.net/buildroot/commit/?id=7ce93438c12ca68c9bb12ed28c4d15d1fa840c94.
You can either use the current Git of Buildroot, of backport this fix
in 2012.11 (which should be trivial).

Do not hesitate to let us know if this solves your problem, or if you
face other issues.

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com