* [Buildroot] Fwd: can't resolve symbol 'wctob'
[not found] <CAJH6qSd6eEdg1pUK9e4tOS=1rw0xhN397Q=rx-Rmehi8fPcpeg@mail.gmail.com>
@ 2012-11-22 10:20 ` Vadim Malenboim
2012-11-22 10:29 ` Gustavo Zacarias
0 siblings, 1 reply; 4+ messages in thread
From: Vadim Malenboim @ 2012-11-22 10:20 UTC (permalink / raw)
To: buildroot
I have a uclibc based toolchain compiled with application.
When I try to run it on target I receive - can't resolve symbol 'wctob'
I understand that it is missing somewhere in the uclibc.
Where do I need to add it ?
--
* Vadim Malenboim.*
Low Level Software Engineer.
Cellular : +972(544)925862
E-Mail : vadim at tangotec.com
WEB : www.tangotec.com
--
* Vadim Malenboim.*
Low Level Software Engineer.
Cellular : +972(544)925862
E-Mail : vadim at tangotec.com
WEB : www.tangotec.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121122/d88a1723/attachment.html>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Fwd: can't resolve symbol 'wctob'
2012-11-22 10:20 ` [Buildroot] Fwd: can't resolve symbol 'wctob' Vadim Malenboim
@ 2012-11-22 10:29 ` Gustavo Zacarias
2012-11-22 10:48 ` Vadim Malenboim
0 siblings, 1 reply; 4+ messages in thread
From: Gustavo Zacarias @ 2012-11-22 10:29 UTC (permalink / raw)
To: buildroot
On 11/22/2012 07:20 AM, Vadim Malenboim wrote:
> I have a uclibc based toolchain compiled with application.
> When I try to run it on target I receive - can't resolve symbol 'wctob'
>
> I understand that it is missing somewhere in the uclibc.
> Where do I need to add it ?
You are missing WCHAR support.
Regards.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Fwd: can't resolve symbol 'wctob'
2012-11-22 10:29 ` Gustavo Zacarias
@ 2012-11-22 10:48 ` Vadim Malenboim
2012-11-22 10:53 ` Gustavo Zacarias
0 siblings, 1 reply; 4+ messages in thread
From: Vadim Malenboim @ 2012-11-22 10:48 UTC (permalink / raw)
To: buildroot
I suspected that this is the issue, however I specially added it in the
configuration.
I'll do another build from scratch adding the WCHAR.
Thank you.
On Thu, Nov 22, 2012 at 12:29 PM, Gustavo Zacarias
<gustavo@zacarias.com.ar>wrote:
> You are missing WCHAR support.
>
--
* Vadim Malenboim.*
Low Level Software Engineer.
Cellular : +972(544)925862
E-Mail : vadim at tangotec.com
WEB : www.tangotec.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121122/bb84ca5e/attachment.html>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Fwd: can't resolve symbol 'wctob'
2012-11-22 10:48 ` Vadim Malenboim
@ 2012-11-22 10:53 ` Gustavo Zacarias
0 siblings, 0 replies; 4+ messages in thread
From: Gustavo Zacarias @ 2012-11-22 10:53 UTC (permalink / raw)
To: buildroot
On 11/22/2012 07:48 AM, Vadim Malenboim wrote:
> I suspected that this is the issue, however I specially added it in the
> configuration.
> I'll do another build from scratch adding the WCHAR.
>
> Thank you.
Yes, changing toolchain options requires a complete rebuild.
Regards.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-11-22 10:53 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CAJH6qSd6eEdg1pUK9e4tOS=1rw0xhN397Q=rx-Rmehi8fPcpeg@mail.gmail.com>
2012-11-22 10:20 ` [Buildroot] Fwd: can't resolve symbol 'wctob' Vadim Malenboim
2012-11-22 10:29 ` Gustavo Zacarias
2012-11-22 10:48 ` Vadim Malenboim
2012-11-22 10:53 ` Gustavo Zacarias
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox