* [Buildroot] buildroot-2012.11 openssh: Bad trap error
@ 2012-12-06 9:59 Jan Schunke
2012-12-06 14:56 ` Gustavo Zacarias
0 siblings, 1 reply; 4+ messages in thread
From: Jan Schunke @ 2012-12-06 9:59 UTC (permalink / raw)
To: buildroot
I am using buildroot-2012.11 on Powerpc 440 (Xilinx Virtex5) without FPU
when I boot I get:
...
Starting network...
Generating RSA Key...
[ 5.527467] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
Trace/breakpoint trap
Generating RSA Key...
[ 5.572257] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
Trace/breakpoint trap
Generating DSA Key...
THIS CAN TAKE A MINUTE OR TWO DEPENDING ON YOUR PROCESSOR!
[ 5.594576] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
Trace/breakpoint trap
Generating ECDSA Key...
THIS CAN TAKE A MINUTE OR TWO DEPENDING ON YOUR PROCESSOR!
[ 5.615732] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
Trace/breakpoint trap
Starting sshd: [ 5.940254] Bad trap at PC: 48063f20, SR: 2d000,
vector=2010
Trace/breakpoint trap
OK
...
I can achieve a similar behaviour if I compile a program with -mhard-float.
So I guess for one of the following packages softfloat is not set correctly.
Maybe someone more competent can take a look into this.
When I roll back
openssh from 6.1p1 to 6.0p1
openssl from 1.0.1c to 1.0.0j
zlib from 1.27 to 1.26
everything is fine.
Regards
Jan
PS.: Here is my buildroot configuration
#
# Automatically generated make config: don't edit
# Buildroot 2012.11-hgf79de7c70d36-dirty Configuration
#
BR2_HAVE_DOT_CONFIG=y
# BR2_arm is not set
# BR2_armeb is not set
# BR2_aarch64 is not set
# BR2_avr32 is not set
# BR2_bfin is not set
# BR2_i386 is not set
# BR2_microblazeel is not set
# BR2_microblazebe is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_mips64 is not set
# BR2_mips64el is not set
BR2_powerpc=y
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_x86_64 is not set
# BR2_xtensa is not set
BR2_ARCH="powerpc"
BR2_ENDIAN="BIG"
BR2_GCC_TARGET_TUNE="440"
# BR2_generic_powerpc is not set
# BR2_powerpc_401 is not set
# BR2_powerpc_403 is not set
# BR2_powerpc_405 is not set
# BR2_powerpc_405fp is not set
BR2_powerpc_440=y
# BR2_powerpc_440fp is not set
# BR2_powerpc_505 is not set
# BR2_powerpc_601 is not set
# BR2_powerpc_602 is not set
# BR2_powerpc_603 is not set
# BR2_powerpc_603e is not set
# BR2_powerpc_604 is not set
# BR2_powerpc_604e is not set
# BR2_powerpc_620 is not set
# BR2_powerpc_630 is not set
# BR2_powerpc_740 is not set
# BR2_powerpc_7400 is not set
# BR2_powerpc_7450 is not set
# BR2_powerpc_750 is not set
# BR2_powerpc_801 is not set
# BR2_powerpc_821 is not set
# BR2_powerpc_823 is not set
# BR2_powerpc_860 is not set
# BR2_powerpc_970 is not set
# BR2_powerpc_8540 is not set
# BR2_powerpc_8548 is not set
# BR2_powerpc_e300c2 is not set
# BR2_powerpc_e300c3 is not set
# BR2_powerpc_e500mc is not set
BR2_powerpc_CLASSIC=y
#
# Build options
#
#
# Commands
#
BR2_WGET="wget --passive-ftp -nd -t 3"
BR2_SVN="svn"
BR2_BZR="bzr"
BR2_GIT="git"
BR2_LOCALFILES="cp"
BR2_SCP="scp"
BR2_SSH="ssh"
BR2_HG="hg"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_XZCAT="xzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_HOST_DIR="$(BASE_DIR)/host"
#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://sources.buildroot.net/"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
BR2_JLEVEL=0
BR2_CCACHE=y
BR2_CCACHE_DIR="$(HOME)/.buildroot-ccache"
# BR2_DEPRECATED is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
BR2_STRIP_EXCLUDE_FILES=""
BR2_STRIP_EXCLUDE_DIRS=""
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
BR2_PACKAGE_OVERRIDE_FILE="$(TOPDIR)/local.mk"
#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_CTNG is not set
#
# Kernel Header Options
#
BR2_KERNEL_HEADERS_3_0=y
# BR2_KERNEL_HEADERS_3_1 is not set
# BR2_KERNEL_HEADERS_3_2 is not set
# BR2_KERNEL_HEADERS_3_3 is not set
# BR2_KERNEL_HEADERS_3_4 is not set
# BR2_KERNEL_HEADERS_3_5 is not set
# BR2_KERNEL_HEADERS_3_6 is not set
# BR2_KERNEL_HEADERS_VERSION is not set
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="3.0.53"
#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_31 is not set
# BR2_UCLIBC_VERSION_0_9_32 is not set
BR2_UCLIBC_VERSION_0_9_33=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.33.2"
BR2_UCLIBC_CONFIG="board/shf/shf1x104/uClibc-0.9.33.2.config"
BR2_PTHREAD_DEBUG=y
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_20_1 is not set
# BR2_BINUTILS_VERSION_2_21 is not set
# BR2_BINUTILS_VERSION_2_21_1 is not set
# BR2_BINUTILS_VERSION_2_22 is not set
BR2_BINUTILS_VERSION_2_23_1=y
BR2_BINUTILS_VERSION="2.23.1"
BR2_BINUTILS_EXTRA_CONFIG_OPTIONS=""
#
# GCC Options
#
# BR2_GCC_VERSION_4_3_X is not set
# BR2_GCC_VERSION_4_4_X is not set
# BR2_GCC_VERSION_4_5_X is not set
BR2_GCC_VERSION_4_6_X=y
# BR2_GCC_VERSION_4_7_X is not set
# BR2_GCC_VERSION_SNAP is not set
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.6.3"
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y
BR2_GCC_ENABLE_TLS=y
# BR2_GCC_ENABLE_OPENMP is not set
#
# Gdb Options
#
BR2_PACKAGE_GDB=y
BR2_PACKAGE_GDB_SERVER=y
BR2_PACKAGE_GDB_HOST=y
# BR2_GDB_VERSION_7_2 is not set
# BR2_GDB_VERSION_7_3 is not set
BR2_GDB_VERSION_7_4=y
BR2_GDB_VERSION="7.4.1"
BR2_LARGEFILE=y
BR2_USE_WCHAR=y
BR2_INSTALL_LIBSTDCPP=y
BR2_TOOLCHAIN_HAS_THREADS=y
BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED=y
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y
# BR2_ENABLE_LOCALE_PURGE is not set
BR2_GENERATE_LOCALE=""
BR2_NEEDS_GETTEXT=y
BR2_USE_MMU=y
BR2_SOFT_FLOAT=y
BR2_TARGET_OPTIMIZATION="-pipe -msoft-float"
BR2_TARGET_LDFLAGS=""
#
# Toolchain Options
#
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
# BR2_TOOLCHAIN_BUILDROOT_INET_IPV6 is not set
# BR2_TOOLCHAIN_BUILDROOT_INET_RPC is not set
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# BR2_TOOLCHAIN_BUILDROOT_LOCALE is not set
BR2_TOOLCHAIN_BUILDROOT_CXX=y
# BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
# BR2_PTHREADS_OLD is not set
BR2_PTHREADS_NATIVE=y
#
# System configuration
#
BR2_TARGET_GENERIC_HOSTNAME="shf200g"
BR2_TARGET_GENERIC_ISSUE="Welcome to shf200g"
BR2_ROOTFS_DEVICE_CREATION_STATIC=y
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV is not set
BR2_INIT_BUSYBOX=y
# BR2_INIT_SYSV is not set
#
# systemd requires largefile, wchar, IPv6, threads and udev support
#
# BR2_INIT_NONE is not set
BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt"
BR2_ROOTFS_STATIC_DEVICE_TABLE="system/device_table_dev.txt"
BR2_ROOTFS_SKELETON_DEFAULT=y
# BR2_ROOTFS_SKELETON_CUSTOM is not set
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set
BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200"
BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
BR2_ROOTFS_POST_BUILD_SCRIPT=""
#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_19_X is not set
BR2_BUSYBOX_VERSION_1_20_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.20.2"
BR2_PACKAGE_BUSYBOX_CONFIG="board/shf/shf1x104/busybox-1.20.1.config"
# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
# BR2_PACKAGE_BUSYBOX_WATCHDOG is not set
#
# Audio and video applications
#
# BR2_PACKAGE_ALSA_UTILS is not set
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_BELLAGIO is not set
# BR2_PACKAGE_FAAD2 is not set
# BR2_PACKAGE_FLAC is not set
#
# ffmpeg requires a toolchain with LARGEFILE and IPV6 support
#
# BR2_PACKAGE_GSTREAMER is not set
#
# gst-ffmpeg requires a toolchain with LARGEFILE and IPV6 support
#
# BR2_PACKAGE_LAME is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPD is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_MUSEPACK is not set
# BR2_PACKAGE_OPUS_TOOLS is not set
# BR2_PACKAGE_PULSEAUDIO is not set
# BR2_PACKAGE_VORBIS_TOOLS is not set
# BR2_PACKAGE_WAVPACK is not set
#
# Compressors and decompressors
#
BR2_PACKAGE_BZIP2=y
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_XZ is not set
#
# Debugging, profiling and benchmark
#
# BR2_PACKAGE_BONNIE is not set
# BR2_PACKAGE_DHRYSTONE is not set
# BR2_PACKAGE_DSTAT is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LATENCYTOP is not set
# BR2_PACKAGE_LMBENCH is not set
# BR2_PACKAGE_LTP_TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
BR2_PACKAGE_MEMSTAT=y
BR2_PACKAGE_NETPERF=y
# BR2_PACKAGE_OPROFILE is not set
# BR2_PACKAGE_RAMSPEED is not set
# BR2_PACKAGE_RT_TESTS is not set
BR2_PACKAGE_STRACE=y
# BR2_PACKAGE_STRESS is not set
# BR2_PACKAGE_SYSPROF is not set
# BR2_PACKAGE_WHETSTONE is not set
# BR2_PACKAGE_VALGRIND is not set
# BR2_PACKAGE_PV is not set
#
# Development tools
#
# BR2_PACKAGE_BINUTILS is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CCACHE is not set
# BR2_PACKAGE_CVS is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_GMP is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_MPC is not set
# BR2_PACKAGE_MPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
# BR2_PACKAGE_PKGCONF is not set
# BR2_PACKAGE_SSTRIP is not set
# BR2_PACKAGE_VALA is not set
#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_PRBOOM is not set
#
# Graphic libraries and applications (graphic/text)
#
#
# Graphic applications
#
# BR2_PACKAGE_RRDTOOL is not set
#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_FBGRAB is not set
#
# fbterm requires a toolchain with C++, WCHAR and locale support
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FB_TEST_APP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_SDL is not set
#
# other GUIs
#
# BR2_PACKAGE_EFL is not set
# BR2_PACKAGE_QT is not set
# BR2_PACKAGE_XORG7 is not set
#
# X libraries and helper libraries
#
# BR2_PACKAGE_LIBERATION is not set
#
# X Window managers
#
#
# X applications
#
# BR2_PACKAGE_GOB2 is not set
#
# midori requires C++, WCHAR in toolchain and libgtk2
#
#
# Filesystem and flash utilities
#
# BR2_PACKAGE_CIFS_UTILS is not set
# BR2_PACKAGE_CRAMFS is not set
# BR2_PACKAGE_DOSFSTOOLS is not set
BR2_PACKAGE_E2FSPROGS=y
BR2_PACKAGE_E2FSPROGS_BADBLOCKS=y
# BR2_PACKAGE_E2FSPROGS_CHATTR is not set
# BR2_PACKAGE_E2FSPROGS_DEBUGFS is not set
# BR2_PACKAGE_E2FSPROGS_DUMPE2FS is not set
# BR2_PACKAGE_E2FSPROGS_E2FREEFRAG is not set
BR2_PACKAGE_E2FSPROGS_E2FSCK=y
# BR2_PACKAGE_E2FSPROGS_E2IMAGE is not set
BR2_PACKAGE_E2FSPROGS_E2LABEL=y
BR2_PACKAGE_E2FSPROGS_E2UNDO=y
# BR2_PACKAGE_E2FSPROGS_E4DEFRAG is not set
# BR2_PACKAGE_E2FSPROGS_FILEFRAG is not set
# BR2_PACKAGE_E2FSPROGS_FINDFS is not set
# BR2_PACKAGE_E2FSPROGS_FSCK is not set
# BR2_PACKAGE_E2FSPROGS_LOGSAVE is not set
# BR2_PACKAGE_E2FSPROGS_LSATTR is not set
# BR2_PACKAGE_E2FSPROGS_MKE2FS is not set
# BR2_PACKAGE_E2FSPROGS_MKLOSTFOUND is not set
# BR2_PACKAGE_E2FSPROGS_RESIZE2FS is not set
BR2_PACKAGE_E2FSPROGS_TUNE2FS=y
# BR2_PACKAGE_E2FSPROGS_UUIDGEN is not set
# BR2_PACKAGE_GENEXT2FS is not set
# BR2_PACKAGE_GENROMFS is not set
# BR2_PACKAGE_MAKEDEVS is not set
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NFS_UTILS is not set
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_SQUASHFS is not set
# BR2_PACKAGE_SSHFS is not set
# BR2_PACKAGE_UNIONFS is not set
# BR2_PACKAGE_XFSPROGS is not set
#
# Hardware handling
#
# BR2_PACKAGE_CDRKIT is not set
# BR2_PACKAGE_DBUS is not set
# BR2_PACKAGE_DMRAID is not set
BR2_PACKAGE_EEPROG=y
# BR2_PACKAGE_EVTEST is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_FMTOOLS is not set
# BR2_PACKAGE_FXLOAD is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_GDISK is not set
# BR2_PACKAGE_GPSD is not set
# BR2_PACKAGE_GVFS is not set
# BR2_PACKAGE_HWDATA is not set
BR2_PACKAGE_I2C_TOOLS=y
# BR2_PACKAGE_INPUT_EVENT_DAEMON is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_IRDA_UTILS is not set
# BR2_PACKAGE_KBD is not set
# BR2_PACKAGE_LCDPROC is not set
# BR2_PACKAGE_LINUX_FIRMWARE is not set
BR2_PACKAGE_LM_SENSORS=y
#
# lm-sensors tools
#
BR2_PACKAGE_LM_SENSORS_SENSORS=y
BR2_PACKAGE_LM_SENSORS_FANCONTROL=y
# BR2_PACKAGE_LM_SENSORS_ISADUMP is not set
# BR2_PACKAGE_LM_SENSORS_ISASET is not set
BR2_PACKAGE_LM_SENSORS_PWMCONFIG=y
BR2_PACKAGE_LM_SENSORS_SENSORS_DETECT=y
# BR2_PACKAGE_LSHW is not set
# BR2_PACKAGE_LSUIO is not set
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MINICOM is not set
# BR2_PACKAGE_NANOCOM is not set
# BR2_PACKAGE_OFONO is not set
# BR2_PACKAGE_OPEN2300 is not set
# BR2_PACKAGE_OPENOCD is not set
# BR2_PACKAGE_PARTED is not set
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_PICOCOM is not set
# BR2_PACKAGE_RNG_TOOLS is not set
# BR2_PACKAGE_SANE_BACKENDS is not set
# BR2_PACKAGE_SDPARM is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_SREDIRD is not set
# BR2_PACKAGE_STATSERIAL is not set
# BR2_PACKAGE_SYSSTAT is not set
# BR2_PACKAGE_TI_UTILS is not set
# BR2_PACKAGE_UBOOT_TOOLS is not set
#
# udev requires /dev mgmnt set to udev under System configuration
#
# BR2_PACKAGE_USB_MODESWITCH is not set
# BR2_PACKAGE_USB_MODESWITCH_DATA is not set
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set
#
# Interpreter languages and scripting
#
# BR2_PACKAGE_ERLANG is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_LUAJIT is not set
# BR2_PACKAGE_PERL is not set
# BR2_PACKAGE_PHP is not set
BR2_PACKAGE_PYTHON=y
# BR2_PACKAGE_PYTHON_PY_ONLY is not set
# BR2_PACKAGE_PYTHON_PYC_ONLY is not set
BR2_PACKAGE_PYTHON_PY_PYC=y
#
# core python modules
#
#
# The following modules are unusual or require extra libraries
#
# BR2_PACKAGE_PYTHON_BZIP2 is not set
# BR2_PACKAGE_PYTHON_BSDDB is not set
# BR2_PACKAGE_PYTHON_CODECSCJK is not set
# BR2_PACKAGE_PYTHON_CURSES is not set
# BR2_PACKAGE_PYTHON_PYEXPAT is not set
# BR2_PACKAGE_PYTHON_READLINE is not set
# BR2_PACKAGE_PYTHON_SSL is not set
BR2_PACKAGE_PYTHON_UNICODEDATA=y
# BR2_PACKAGE_PYTHON_SQLITE is not set
# BR2_PACKAGE_PYTHON_ZLIB is not set
# BR2_PACKAGE_PYTHON3 is not set
#
# external python modules
#
# BR2_PACKAGE_PYTHON_DPKT is not set
# BR2_PACKAGE_PYTHON_ID3 is not set
# BR2_PACKAGE_PYTHON_MAD is not set
# BR2_PACKAGE_PYTHON_MELD3 is not set
# BR2_PACKAGE_PYTHON_NETIFACES is not set
# BR2_PACKAGE_PYTHON_NFC is not set
# BR2_PACKAGE_PYTHON_PROTOBUF is not set
# BR2_PACKAGE_PYTHON_PYGAME is not set
# BR2_PACKAGE_PYTHON_SERIAL is not set
# BR2_PACKAGE_PYTHON_SETUPTOOLS is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set
#
# Libraries
#
#
# Audio/Sound
#
# BR2_PACKAGE_ALSA_LIB is not set
# BR2_PACKAGE_AUDIOFILE is not set
# BR2_PACKAGE_LIBAO is not set
# BR2_PACKAGE_LIBCDAUDIO is not set
# BR2_PACKAGE_LIBCUE is not set
# BR2_PACKAGE_LIBCUEFILE is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBLO is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBREPLAYGAIN is not set
# BR2_PACKAGE_LIBSAMPLERATE is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_OPUS is not set
# BR2_PACKAGE_PORTAUDIO is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_TAGLIB is not set
# BR2_PACKAGE_TREMOR is not set
#
# Compression and decompression
#
# BR2_PACKAGE_LIBARCHIVE is not set
# BR2_PACKAGE_LZO is not set
BR2_PACKAGE_ZLIB=y
#
# Crypto
#
# BR2_PACKAGE_BEECRYPT is not set
BR2_PACKAGE_GNUTLS=y
BR2_PACKAGE_LIBGCRYPT=y
BR2_PACKAGE_LIBGPG_ERROR=y
BR2_PACKAGE_LIBNSS=y
# BR2_PACKAGE_OCF_LINUX is not set
BR2_PACKAGE_OPENSSL=y
# BR2_PACKAGE_OPENSSL_BIN is not set
# BR2_PACKAGE_OPENSSL_ENGINES is not set
# BR2_PACKAGE_OPENSSL_OCF is not set
# BR2_PACKAGE_POLARSSL is not set
#
# Database
#
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_GDBM is not set
# BR2_PACKAGE_MYSQL_CLIENT is not set
#
# sqlcipher conflicts with sqlite
#
BR2_PACKAGE_SQLITE=y
# BR2_PACKAGE_SQLITE_READLINE is not set
# BR2_PACKAGE_SQLITE_STAT3 is not set
# BR2_PACKAGE_SQLITE_ENABLE_FTS3 is not set
# BR2_PACKAGE_SQLITE_ENABLE_UNLOCK_NOTIFY is not set
# BR2_PACKAGE_SQLITE_SECURE_DELETE is not set
#
# Filesystem
#
# BR2_PACKAGE_GAMIN is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBFUSE is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBSYSFS is not set
#
# Graphics
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_IMLIB2 is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_LIBDMTX is not set
# BR2_PACKAGE_LIBEXIF is not set
# BR2_PACKAGE_LIBGEOTIFF is not set
# BR2_PACKAGE_GDK_PIXBUF is not set
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBRAW is not set
# BR2_PACKAGE_LIBSVGTINY is not set
# BR2_PACKAGE_LIBUNGIF is not set
# BR2_PACKAGE_OPENCV is not set
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_TIFF is not set
#
# webkit requires C++, WCHAR in toolchain and libgtk2
#
# BR2_PACKAGE_ZXING is not set
#
# Hardware handling
#
# BR2_PACKAGE_CCID is not set
# BR2_PACKAGE_LCDAPI is not set
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_TSLIB is not set
# BR2_PACKAGE_LIBFREEFARE is not set
# BR2_PACKAGE_LIBFTDI is not set
# BR2_PACKAGE_LIBHID is not set
# BR2_PACKAGE_LIBIQRF is not set
# BR2_PACKAGE_LIBNFC is not set
# BR2_PACKAGE_LIBNFC_LLCP is not set
# BR2_PACKAGE_LIBUSB is not set
# BR2_PACKAGE_LIBV4L is not set
# BR2_PACKAGE_MTDEV is not set
# BR2_PACKAGE_PCSC_LITE is not set
#
# Javascript
#
# BR2_PACKAGE_EXPLORERCANVAS is not set
# BR2_PACKAGE_FLOT is not set
# BR2_PACKAGE_JQUERY is not set
# BR2_PACKAGE_JQUERY_SPARKLINE is not set
# BR2_PACKAGE_JQUERY_VALIDATION is not set
# BR2_PACKAGE_JSMIN is not set
#
# Multimedia
#
# BR2_PACKAGE_LIBDVDREAD is not set
# BR2_PACKAGE_LIBDVDNAV is not set
# BR2_PACKAGE_LIBMMS is not set
# BR2_PACKAGE_LIBMPEG2 is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBPLAYER is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIVE555 is not set
# BR2_PACKAGE_MEDIASTREAMER is not set
#
# Networking
#
# BR2_PACKAGE_GLIB_NETWORKING is not set
# BR2_PACKAGE_LIBCGI is not set
# BR2_PACKAGE_LIBCGICC is not set
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBESMTP is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBFCGI is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBOAUTH is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_LIBMNL is not set
# BR2_PACKAGE_LIBMODBUS is not set
# BR2_PACKAGE_LIBMBUS is not set
# BR2_PACKAGE_LIBNETFILTER_ACCT is not set
# BR2_PACKAGE_LIBNETFILTER_CONNTRACK is not set
# BR2_PACKAGE_LIBNETFILTER_CTHELPER is not set
# BR2_PACKAGE_LIBNETFILTER_CTTIMEOUT is not set
# BR2_PACKAGE_LIBNETFILTER_LOG is not set
# BR2_PACKAGE_LIBNFNETLINK is not set
# BR2_PACKAGE_LIBNL is not set
#
# liboping requires a toolchain with IPv6 support enabled
#
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBRSYNC is not set
# BR2_PACKAGE_LIBSOUP is not set
# BR2_PACKAGE_LIBTIRPC is not set
# BR2_PACKAGE_LIBTORRENT is not set
# BR2_PACKAGE_LIBUPNP is not set
# BR2_PACKAGE_LIBVNCSERVER is not set
# BR2_PACKAGE_ORTP is not set
# BR2_PACKAGE_ZEROMQ is not set
#
# Other
#
# BR2_PACKAGE_APR is not set
# BR2_PACKAGE_APR_UTIL is not set
# BR2_PACKAGE_FFTW is not set
# BR2_PACKAGE_LIBARGTABLE2 is not set
# BR2_PACKAGE_ARGP_STANDALONE is not set
# BR2_PACKAGE_BOOST is not set
# BR2_PACKAGE_LIBATOMIC_OPS is not set
# BR2_PACKAGE_LIBCAP is not set
# BR2_PACKAGE_LIBCAP_NG is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBEV is not set
BR2_PACKAGE_LIBFFI=y
# BR2_PACKAGE_GSL is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_LIBICAL is not set
BR2_PACKAGE_LIBNSPR=y
# BR2_PACKAGE_LIBSIGC is not set
# BR2_PACKAGE_LIBTPL is not set
# BR2_PACKAGE_LIBURCU is not set
#
# linux-pam requires a toolchain with WCHAR and locale support
#
# BR2_PACKAGE_LTTNG_LIBUST is not set
# BR2_PACKAGE_MTDEV2TUIO is not set
# BR2_PACKAGE_ORC is not set
# BR2_PACKAGE_POCO is not set
# BR2_PACKAGE_PROTOBUF is not set
# BR2_PACKAGE_SCHIFRA is not set
# BR2_PACKAGE_LIBLOG4C_LOCALTIME is not set
#
# Text and terminal handling
#
# BR2_PACKAGE_ENCHANT is not set
# BR2_PACKAGE_ICU is not set
# BR2_PACKAGE_LIBICONV is not set
BR2_PACKAGE_NCURSES=y
BR2_PACKAGE_NCURSES_TARGET_PANEL=y
BR2_PACKAGE_NCURSES_TARGET_FORM=y
BR2_PACKAGE_NCURSES_TARGET_MENU=y
# BR2_PACKAGE_NEWT is not set
BR2_PACKAGE_PCRE=y
# BR2_PACKAGE_POPT is not set
BR2_PACKAGE_READLINE=y
# BR2_PACKAGE_SLANG is not set
#
# JSON/XML
#
# BR2_PACKAGE_CJSON is not set
# BR2_PACKAGE_EXPAT is not set
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_JSON_C is not set
# BR2_PACKAGE_LIBROXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set
# BR2_PACKAGE_LIBYAML is not set
# BR2_PACKAGE_MXML is not set
# BR2_PACKAGE_XERCES is not set
# BR2_PACKAGE_YAJL is not set
#
# Miscellaneous
#
# BR2_PACKAGE_COLLECTD is not set
# BR2_PACKAGE_EMPTY is not set
# BR2_PACKAGE_GOOGLEFONTDIRECTORY is not set
# BR2_PACKAGE_MOBILE_BROADBAND_PROVIDER_INFO is not set
# BR2_PACKAGE_SHARED_MIME_INFO is not set
# BR2_PACKAGE_SOUND_THEME_BOREALIS is not set
# BR2_PACKAGE_SOUND_THEME_FREEDESKTOP is not set
#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_ARPTABLES is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
# BR2_PACKAGE_BLUEZ_UTILS is not set
# BR2_PACKAGE_BOA is not set
#
# bmon requires a toolchain with IPv6 support
#
# BR2_PACKAGE_BRIDGE_UTILS is not set
# BR2_PACKAGE_CAN_UTILS is not set
#
# connman needs a toolchain with IPv6, WCHAR, thread and resolver support
#
# BR2_PACKAGE_CTORRENT is not set
#
# conntrack-tools requires a toolchain with IPV6 and LARGEFILE support
#
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_DNSMASQ is not set
BR2_PACKAGE_DROPBEAR=y
# BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS is not set
BR2_PACKAGE_DROPBEAR_SMALL=y
# BR2_PACKAGE_DROPBEAR_WTMP is not set
# BR2_PACKAGE_DROPBEAR_LASTLOG is not set
#
# ebtables requires a toolchain with IPv6 support
#
BR2_PACKAGE_ETHTOOL=y
# BR2_PACKAGE_HEIRLOOM_MAILX is not set
# BR2_PACKAGE_HIAWATHA is not set
# BR2_PACKAGE_HOSTAPD is not set
# BR2_PACKAGE_INADYN is not set
BR2_PACKAGE_IPERF=y
# BR2_PACKAGE_IPROUTE2 is not set
# BR2_PACKAGE_IPSEC_TOOLS is not set
# BR2_PACKAGE_IPSET is not set
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_IW is not set
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_LIGHTTPD is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LINPHONE is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MACCHANGER is not set
BR2_PACKAGE_MII_DIAG=y
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MSMTP is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
#
# ndisc6 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_NETATALK is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set
#
# NetworkManager requires a toolchain with IPV6, LARGEFILE, WCHAR and
thread support
#
# BR2_PACKAGE_NFACCT is not set
# BR2_PACKAGE_NOIP is not set
# BR2_PACKAGE_NGIRCD is not set
# BR2_PACKAGE_NGREP is not set
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_NUTTCP is not set
#
# olsr requires a toolchain with IPv6 support
#
# BR2_PACKAGE_OPENNTPD is not set
BR2_PACKAGE_OPENSSH=y
# BR2_PACKAGE_OPENSWAN is not set
# BR2_PACKAGE_OPENVPN is not set
#
# portmap requires a toolchain with RPC support
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set
#
# radvd requires a toolchain with IPV6 support
#
# BR2_PACKAGE_RPCBIND is not set
# BR2_PACKAGE_RSH_REDONE is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_RTORRENT is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SCONESERVER is not set
# BR2_PACKAGE_SER2NET is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SOCKETCAND is not set
# BR2_PACKAGE_SPAWN_FCGI is not set
#
# Squid requires a toolchain with C++ and IPv6 support enabled
#
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_TCPREPLAY is not set
# BR2_PACKAGE_THTTPD is not set
# BR2_PACKAGE_TINYHTTPD is not set
# BR2_PACKAGE_TN5250 is not set
#
# Transmission requires a toolchain with IPv6 support
#
# BR2_PACKAGE_UDPCAST is not set
#
# ulogd requires a toolchain with IPV6 and LARGEFILE support
#
# BR2_PACKAGE_USHARE is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_WPA_SUPPLICANT is not set
# BR2_PACKAGE_XINETD is not set
# BR2_PACKAGE_XL2TP is not set
#
# Package managers
#
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_OPKG is not set
#
# Real-Time
#
# BR2_PACKAGE_XENOMAI is not set
#
# Shell and utilities
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_DIALOG is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GNUPG is not set
# BR2_PACKAGE_INOTIFY_TOOLS is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
# BR2_PACKAGE_LOGROTATE is not set
# BR2_PACKAGE_LOGSURFER is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SUDO is not set
# BR2_PACKAGE_XMLSTARLET is not set
#
# System tools
#
# BR2_PACKAGE_ACL is not set
# BR2_PACKAGE_ATTR is not set
# BR2_PACKAGE_BWM_NG is not set
# BR2_PACKAGE_CPULOAD is not set
# BR2_PACKAGE_HTOP is not set
# BR2_PACKAGE_KMOD is not set
# BR2_PACKAGE_MONIT is not set
# BR2_PACKAGE_QUOTA is not set
# BR2_PACKAGE_SUPERVISOR is not set
#
# systemd not available (depends on /dev management with udev and ipv6
support, and thread support in toolchain)
#
BR2_PACKAGE_UTIL_LINUX=y
# BR2_PACKAGE_UTIL_LINUX_MOUNT is not set
BR2_PACKAGE_UTIL_LINUX_FSCK=y
# BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set
BR2_PACKAGE_UTIL_LINUX_LIBUUID=y
# BR2_PACKAGE_UTIL_LINUX_UUIDD is not set
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
# BR2_PACKAGE_UTIL_LINUX_AGETTY is not set
# BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set
# BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set
# BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set
# BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set
# BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set
# BR2_PACKAGE_UTIL_LINUX_RENAME is not set
# BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set
# BR2_PACKAGE_UTIL_LINUX_WALL is not set
# BR2_PACKAGE_UTIL_LINUX_PARTX is not set
# BR2_PACKAGE_UTIL_LINUX_ARCH is not set
# BR2_PACKAGE_UTIL_LINUX_INIT is not set
BR2_PACKAGE_UTIL_LINUX_KILL=y
# BR2_PACKAGE_UTIL_LINUX_LAST is not set
# BR2_PACKAGE_UTIL_LINUX_MESG is not set
# BR2_PACKAGE_UTIL_LINUX_RAW is not set
# BR2_PACKAGE_UTIL_LINUX_RESET is not set
# BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set
# BR2_PACKAGE_UTIL_LINUX_WRITE is not set
#
# Text editors and viewers
#
# BR2_PACKAGE_ED is not set
BR2_PACKAGE_NANO=y
BR2_PACKAGE_NANO_TINY=y
# BR2_PACKAGE_UEMACS is not set
#
# Host utilities
#
# BR2_PACKAGE_HOST_DFU_UTIL is not set
# BR2_PACKAGE_HOST_LPC3250LOADER is not set
# BR2_PACKAGE_HOST_OPENOCD is not set
# BR2_PACKAGE_HOST_SAM_BA is not set
# BR2_PACKAGE_HOST_UBOOT_TOOLS is not set
#
# Filesystem images
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_CPIO=y
# BR2_TARGET_ROOTFS_CPIO_NONE is not set
BR2_TARGET_ROOTFS_CPIO_GZIP=y
# BR2_TARGET_ROOTFS_CPIO_BZIP2 is not set
# BR2_TARGET_ROOTFS_CPIO_LZMA is not set
#
# initramfs requires a Linux kernel to be built
#
# BR2_TARGET_ROOTFS_ROMFS is not set
#
# Bootloaders
#
# BR2_TARGET_BAREBOX is not set
# BR2_TARGET_UBOOT is not set
#
# Kernel
#
# BR2_LINUX_KERNEL is not set
BR2_LEGACY_CHECK_2012_11=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_INPUT_TOOLS_EVTEST is not set
--
*******************************************************
Jan-Hendrik Schunke
Entwickler / Developer
SHF Communication Technologies AG
Wilhelm-v.-Siemens-Str. 23 D; 12277 Berlin, Germany
E-Mail: schunke at shf.de
Phone: +49-(0)30- 77 20 51-0 direct: -45
Fax: +49-(0)30- 75 31 07 8
Web: www.shf.de
*******************************************************
Sitz der Gesellschaft/Registered Office: Berlin;
Registergericht/Register Court: AG Berlin-Charlottenburg HRB 72633;
Vorstand/Executive Board: Dr. Frank Hieronymi, Dr. Lars Klapproth;
Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Walter
L. Rust.
Diese E-Mail enth?lt vertrauliche und/oder rechtlich gesch?tzte
Informationen und ist ausschlie?lich f?r den bezeichneten Adressaten
oder dessen Vertreter bestimmt. Wenn Sie nicht der richtige Adressat
sind oder diese E-Mail irrt?mlich erhalten haben, informieren Sie bitte
sofort den Absender und vernichten Sie diese Mail. Jede Form der
Kenntnisnahme, Ver?ffentlichung, Vervielf?ltigung oder Weitergabe durch
andere Empf?nger ist unzul?ssig.
This e-mail may contain confidential and/or privileged information and
is intended solely for the addressee or a representative there of. If
you are not the intended recipient (or have received this e-mail in
error) please notify the sender immediately and destroy this e-mail.
Access to, publishing and copying of the information by a third party is
unauthorised.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] buildroot-2012.11 openssh: Bad trap error
2012-12-06 9:59 [Buildroot] buildroot-2012.11 openssh: Bad trap error Jan Schunke
@ 2012-12-06 14:56 ` Gustavo Zacarias
2012-12-07 10:18 ` Jan Schunke
0 siblings, 1 reply; 4+ messages in thread
From: Gustavo Zacarias @ 2012-12-06 14:56 UTC (permalink / raw)
To: buildroot
On 12/06/2012 06:59 AM, Jan Schunke wrote:
> I am using buildroot-2012.11 on Powerpc 440 (Xilinx Virtex5) without FPU
>
> when I boot I get:
>
> ...
> Starting network...
> Generating RSA Key...
> [ 5.527467] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
> Trace/breakpoint trap
> Generating RSA Key...
> [ 5.572257] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
> Trace/breakpoint trap
> Generating DSA Key...
> THIS CAN TAKE A MINUTE OR TWO DEPENDING ON YOUR PROCESSOR!
>
> [ 5.594576] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
> Trace/breakpoint trap
> Generating ECDSA Key...
> THIS CAN TAKE A MINUTE OR TWO DEPENDING ON YOUR PROCESSOR!
>
> [ 5.615732] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
> Trace/breakpoint trap
> Starting sshd: [ 5.940254] Bad trap at PC: 48063f20, SR: 2d000,
> vector=2010
> Trace/breakpoint trap
> OK
> ...
>
> I can achieve a similar behaviour if I compile a program with -mhard-float.
>
> So I guess for one of the following packages softfloat is not set correctly.
>
> Maybe someone more competent can take a look into this.
>
> When I roll back
>
> openssh from 6.1p1 to 6.0p1
> openssl from 1.0.1c to 1.0.0j
> zlib from 1.27 to 1.26
>
> everything is fine.
Hi.
Ok, i managed to build a similar scenario as yours under qemu
(virtex-ml507 emulation).
With similar toolchain/versions/options i'm unable to hit the issue.
It's most likely that qemu is being too optimistic in the CPU emulation
department (handling the invalid opcodes for a 440 core).
Did you try switching just a single version?
I'm betting on openssl since it's got powerpc-specific optimizations
whereas zlib and openssh don't.
You could also try disabling the powerpc optimizations in
package/openssl/openssl.mk, just remove the block from ifeq
($(ARCH),powerpc) to the first endif (3 lines).
And let us know :)
Regards.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] buildroot-2012.11 openssh: Bad trap error
2012-12-06 14:56 ` Gustavo Zacarias
@ 2012-12-07 10:18 ` Jan Schunke
2012-12-07 12:09 ` Gustavo Zacarias
0 siblings, 1 reply; 4+ messages in thread
From: Jan Schunke @ 2012-12-07 10:18 UTC (permalink / raw)
To: buildroot
On 06.12.2012 15:56, Gustavo Zacarias wrote:
> On 12/06/2012 06:59 AM, Jan Schunke wrote:
>
>> I am using buildroot-2012.11 on Powerpc 440 (Xilinx Virtex5) without FPU
>>
>> when I boot I get:
>>
>> ...
>> Starting network...
>> Generating RSA Key...
>> [ 5.527467] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
>> Trace/breakpoint trap
>> Generating RSA Key...
>> [ 5.572257] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
>> Trace/breakpoint trap
>> Generating DSA Key...
>> THIS CAN TAKE A MINUTE OR TWO DEPENDING ON YOUR PROCESSOR!
>>
>> [ 5.594576] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
>> Trace/breakpoint trap
>> Generating ECDSA Key...
>> THIS CAN TAKE A MINUTE OR TWO DEPENDING ON YOUR PROCESSOR!
>>
>> [ 5.615732] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
>> Trace/breakpoint trap
>> Starting sshd: [ 5.940254] Bad trap at PC: 48063f20, SR: 2d000,
>> vector=2010
>> Trace/breakpoint trap
>> OK
>> ...
>>
>> I can achieve a similar behaviour if I compile a program with -mhard-float.
>>
>> So I guess for one of the following packages softfloat is not set correctly.
>>
>> Maybe someone more competent can take a look into this.
>>
>> When I roll back
>>
>> openssh from 6.1p1 to 6.0p1
>> openssl from 1.0.1c to 1.0.0j
>> zlib from 1.27 to 1.26
>>
>> everything is fine.
>
> Hi.
> Ok, i managed to build a similar scenario as yours under qemu
> (virtex-ml507 emulation).
> With similar toolchain/versions/options i'm unable to hit the issue.
> It's most likely that qemu is being too optimistic in the CPU emulation
> department (handling the invalid opcodes for a 440 core).
> Did you try switching just a single version?
> I'm betting on openssl since it's got powerpc-specific optimizations
> whereas zlib and openssh don't.
> You could also try disabling the powerpc optimizations in
> package/openssl/openssl.mk, just remove the block from ifeq
> ($(ARCH),powerpc) to the first endif (3 lines).
> And let us know :)
> Regards.
Hi,
I updated all packages back to the newer version and followed your
suggestion:
> You could also try disabling the powerpc optimizations in
> package/openssl/openssl.mk, just remove the block from ifeq
> ($(ARCH),powerpc) to the first endif (3 lines).
and everything is ok, too. Can we just check if $ARCH is powerpc AND
BR2_SOFT_FLOAT is set to yes in package/openssl/openssl.mk?
Regards
Jan
--
*******************************************************
Jan-Hendrik Schunke
Entwickler / Developer
SHF Communication Technologies AG
Wilhelm-v.-Siemens-Str. 23 D; 12277 Berlin, Germany
E-Mail: schunke at shf.de
Phone: +49-(0)30- 77 20 51-0 direct: -45
Fax: +49-(0)30- 75 31 07 8
Web: www.shf.de
*******************************************************
Sitz der Gesellschaft/Registered Office: Berlin;
Registergericht/Register Court: AG Berlin-Charlottenburg HRB 72633;
Vorstand/Executive Board: Dr. Frank Hieronymi, Dr. Lars Klapproth;
Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Walter
L. Rust.
Diese E-Mail enth?lt vertrauliche und/oder rechtlich gesch?tzte
Informationen und ist ausschlie?lich f?r den bezeichneten Adressaten
oder dessen Vertreter bestimmt. Wenn Sie nicht der richtige Adressat
sind oder diese E-Mail irrt?mlich erhalten haben, informieren Sie bitte
sofort den Absender und vernichten Sie diese Mail. Jede Form der
Kenntnisnahme, Ver?ffentlichung, Vervielf?ltigung oder Weitergabe durch
andere Empf?nger ist unzul?ssig.
This e-mail may contain confidential and/or privileged information and
is intended solely for the addressee or a representative there of. If
you are not the intended recipient (or have received this e-mail in
error) please notify the sender immediately and destroy this e-mail.
Access to, publishing and copying of the information by a third party is
unauthorised.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] buildroot-2012.11 openssh: Bad trap error
2012-12-07 10:18 ` Jan Schunke
@ 2012-12-07 12:09 ` Gustavo Zacarias
0 siblings, 0 replies; 4+ messages in thread
From: Gustavo Zacarias @ 2012-12-07 12:09 UTC (permalink / raw)
To: buildroot
On 12/07/2012 07:18 AM, Jan Schunke wrote:
> Hi,
>
> I updated all packages back to the newer version and followed your
> suggestion:
>
>> You could also try disabling the powerpc optimizations in
>> package/openssl/openssl.mk, just remove the block from ifeq
>> ($(ARCH),powerpc) to the first endif (3 lines).
>
> and everything is ok, too. Can we just check if $ARCH is powerpc AND
> BR2_SOFT_FLOAT is set to yes in package/openssl/openssl.mk?
>
> Regards
> Jan
Hi again.
Patch just sent.
I couldn't track it down to being an FP issue since openssl doesn't seem
to be using any FP opcode, so i guess it's some missing opcode from the
4xx cores that it's using.
It wouldn't matter if the toolchain is soft or hard float either since
openssl uses inline assembly without checking for it.
The patch excludes powerpc assembly optimizations for al 4xx cores to
err on the safe side.
Thanks for the report and testing.
Regards.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-12-07 12:09 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-06 9:59 [Buildroot] buildroot-2012.11 openssh: Bad trap error Jan Schunke
2012-12-06 14:56 ` Gustavo Zacarias
2012-12-07 10:18 ` Jan Schunke
2012-12-07 12:09 ` Gustavo Zacarias
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox