[Buildroot] [pull request] Pull request for branch yem-new-packages

[Buildroot] [pull request] Pull request for branch yem-new-packages

[Yann E. MORIN]

Hello All!

This patch series is an extract from my qemu-related big-ish series,
that I did split up to ease regview / integration upstream.

This part of the series is unrelated to the previously-sent series
yem-host-qemu-fixes.

This series deals with adding the required packages to build QEMU on
the target.

The following changes since commit e043dd6c99a801dc7f863986c78c947e25c75b3f:

  barebox: bump to version 2012.12.1 (2012-12-13 09:37:10 +0100)

are available in the git repository at:
  git://gitorious.org/buildroot/buildroot.git yem-new-packages

Yann E. MORIN (20):
      package/vde2: new package
      package/libiscsi: new package
      package/usbredir: new package
      package/celt051: new package
      package/python-pyparsing: new package
      package/cegui06: new package
      package/slirp: new package
      package/spice-protocol: new package
      package/spice: new package
      package/spice: enable client
      package/spice: enable GUI
      package/spice: enable slirp support
      package/libseccomp: new package
      package/keyutils: new package
      package/pmake: add host pmake
      package/libbsd: new package
      package/libedit2: new package
      package/ceph: new package
      package/dtc: new package
      package/dtc: add option to install programs

 package/Config.in                                  |   14 +
 package/cegui06/Config.in                          |   15 +
 package/cegui06/cegui06-stddef.h.patch             |   26 +
 package/cegui06/cegui06.mk                         |   36 +
 package/ceph/Config.in                             |   18 +
 package/ceph/ceph-no-envz.patch                    |   63 +
 package/ceph/ceph-no-getloadavg.patch              |   61 +
 package/ceph/ceph-no-posix_fallocate.patch         |   50 +
 package/ceph/ceph.mk                               |   53 +
 package/dtc/Config.in                              |   29 +
 package/dtc/dtc-extra_cflags.patch                 |   27 +
 package/dtc/dtc-separate-lib-install.patch         |   28 +
 package/dtc/dtc.mk                                 |   51 +
 package/keyutils/Config.in                         |    7 +
 .../keyutils-01-memleak-from-realloc.patch         |   51 +
 package/keyutils/keyutils-02-another-memleak.patch |   32 +
 package/keyutils/keyutils-03-cifs.patch            |   15 +
 .../keyutils-04-Makefile-for-buildroot.patch       |   65 +
 .../keyutils/keyutils-05-fix-install-rule.patch    |   19 +
 package/keyutils/keyutils.mk                       |   32 +
 package/libbsd/Config.in                           |   10 +
 package/libbsd/libbsd.mk                           |   21 +
 package/libedit2/Config.in                         |    9 +
 package/libedit2/libedit2-01-Makefile.patch        |   25 +
 package/libedit2/libedit2-02-el.c-issetugid.patch  |   24 +
 package/libedit2/libedit2-03-el.c-MAXPATHLEN.patch |   40 +
 .../libedit2/libedit2-04-readline.h-stdio.patch    |   17 +
 .../libedit2/libedit2-08-readline-history.h.patch  |   20 +
 .../libedit2/libedit2-10-define_SIZE_T_MAX.patch   |   18 +
 .../libedit2/libedit2-12-libedit-Makefile.patch    |   54 +
 package/libedit2/libedit2-20-fortify.patch         |   23 +
 package/libedit2/libedit2.mk                       |   75 +
 package/libedit2/libedit2.pc                       |   13 +
 package/libiscsi/Config.in                         |   12 +
 package/libiscsi/libiscsi.mk                       |   15 +
 package/libseccomp/Config.in                       |   13 +
 ...ibseccomp-use-system-headers-from-sysroot.patch |   17 +
 package/libseccomp/libseccomp.mk                   |   22 +
 package/multimedia/Config.in                       |    1 +
 package/multimedia/celt051/Config.in               |   15 +
 package/multimedia/celt051/celt.mk                 |   30 +
 package/pmake/pmake-100_mk.patch                   | 2624 ++++++++++++++++++++
 package/pmake/pmake-110_mkdep.patch                |  230 ++
 package/pmake/pmake-120_fixes.patch                |  266 ++
 package/pmake/pmake-130_maxpathlen.patch           |   39 +
 package/pmake/pmake-140_multiarch.patch            |  354 +++
 package/pmake/pmake-150_mktemp.patch               |   31 +
 package/pmake/pmake.mk                             |   46 +
 package/python-pyparsing/Config.in                 |   11 +
 package/python-pyparsing/python-pyparsing.mk       |   38 +
 package/slirp/Config.in                            |   25 +
 package/slirp/slirp.mk                             |   21 +
 package/spice-protocol/Config.in                   |   12 +
 package/spice-protocol/spice-protocol.mk           |   14 +
 package/spice/Config.in                            |   51 +
 package/spice/spice.mk                             |   80 +
 package/usbredir/Config.in                         |   28 +
 package/usbredir/usbredir.mk                       |   31 +
 package/vde2/Config.in                             |   10 +
 package/vde2/vde2.mk                               |   36 +
 60 files changed, 5113 insertions(+), 0 deletions(-)
 create mode 100644 package/cegui06/Config.in
 create mode 100644 package/cegui06/cegui06-stddef.h.patch
 create mode 100644 package/cegui06/cegui06.mk
 create mode 100644 package/ceph/Config.in
 create mode 100644 package/ceph/ceph-no-envz.patch
 create mode 100644 package/ceph/ceph-no-getloadavg.patch
 create mode 100644 package/ceph/ceph-no-posix_fallocate.patch
 create mode 100644 package/ceph/ceph.mk
 create mode 100644 package/dtc/Config.in
 create mode 100644 package/dtc/dtc-extra_cflags.patch
 create mode 100644 package/dtc/dtc-separate-lib-install.patch
 create mode 100644 package/dtc/dtc.mk
 create mode 100644 package/keyutils/Config.in
 create mode 100644 package/keyutils/keyutils-01-memleak-from-realloc.patch
 create mode 100644 package/keyutils/keyutils-02-another-memleak.patch
 create mode 100644 package/keyutils/keyutils-03-cifs.patch
 create mode 100644 package/keyutils/keyutils-04-Makefile-for-buildroot.patch
 create mode 100644 package/keyutils/keyutils-05-fix-install-rule.patch
 create mode 100644 package/keyutils/keyutils.mk
 create mode 100644 package/libbsd/Config.in
 create mode 100644 package/libbsd/libbsd.mk
 create mode 100644 package/libedit2/Config.in
 create mode 100644 package/libedit2/libedit2-01-Makefile.patch
 create mode 100644 package/libedit2/libedit2-02-el.c-issetugid.patch
 create mode 100644 package/libedit2/libedit2-03-el.c-MAXPATHLEN.patch
 create mode 100644 package/libedit2/libedit2-04-readline.h-stdio.patch
 create mode 100644 package/libedit2/libedit2-08-readline-history.h.patch
 create mode 100644 package/libedit2/libedit2-10-define_SIZE_T_MAX.patch
 create mode 100644 package/libedit2/libedit2-12-libedit-Makefile.patch
 create mode 100644 package/libedit2/libedit2-20-fortify.patch
 create mode 100644 package/libedit2/libedit2.mk
 create mode 100644 package/libedit2/libedit2.pc
 create mode 100644 package/libiscsi/Config.in
 create mode 100644 package/libiscsi/libiscsi.mk
 create mode 100644 package/libseccomp/Config.in
 create mode 100644 package/libseccomp/libseccomp-use-system-headers-from-sysroot.patch
 create mode 100644 package/libseccomp/libseccomp.mk
 create mode 100644 package/multimedia/celt051/Config.in
 create mode 100644 package/multimedia/celt051/celt.mk
 create mode 100644 package/pmake/pmake-100_mk.patch
 create mode 100644 package/pmake/pmake-110_mkdep.patch
 create mode 100644 package/pmake/pmake-120_fixes.patch
 create mode 100644 package/pmake/pmake-130_maxpathlen.patch
 create mode 100644 package/pmake/pmake-140_multiarch.patch
 create mode 100644 package/pmake/pmake-150_mktemp.patch
 create mode 100644 package/pmake/pmake.mk
 create mode 100644 package/python-pyparsing/Config.in
 create mode 100644 package/python-pyparsing/python-pyparsing.mk
 create mode 100644 package/slirp/Config.in
 create mode 100644 package/slirp/slirp.mk
 create mode 100644 package/spice-protocol/Config.in
 create mode 100644 package/spice-protocol/spice-protocol.mk
 create mode 100644 package/spice/Config.in
 create mode 100644 package/spice/spice.mk
 create mode 100644 package/usbredir/Config.in
 create mode 100644 package/usbredir/usbredir.mk
 create mode 100644 package/vde2/Config.in
 create mode 100644 package/vde2/vde2.mk

Regards,
Yann E. MORIN

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

[Buildroot] [PATCH 01/20] package/vde2: new package

[Yann E. MORIN]

VDE is an ethernet compliant virtual network that can be
spawned over a set of physical computer over the Internet.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
---
 package/Config.in      |    1 +
 package/vde2/Config.in |   10 ++++++++++
 package/vde2/vde2.mk   |   36 ++++++++++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+), 0 deletions(-)
 create mode 100644 package/vde2/Config.in
 create mode 100644 package/vde2/vde2.mk

diff --git a/package/Config.in b/package/Config.in
index cad1221..2345b4b 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -672,6 +672,7 @@ source "package/ttcp/Config.in"
 source "package/udpcast/Config.in"
 source "package/ulogd/Config.in"
 source "package/ushare/Config.in"
+source "package/vde2/Config.in"
 source "package/vpnc/Config.in"
 source "package/vsftpd/Config.in"
 source "package/vtun/Config.in"
diff --git a/package/vde2/Config.in b/package/vde2/Config.in
new file mode 100644
index 0000000..f344d67
--- /dev/null
+++ b/package/vde2/Config.in
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_VDE2
+	bool "vde2"
+	help
+	  VDE is an ethernet compliant virtual network that can be
+	  spawned over a set of physical computers over the Internet.
+	  VDE is part of the virtualsquare project.
+	  
+	  http://vde.sourceforge.net/
+	  
+	  Note: only the libraries are installed.
diff --git a/package/vde2/vde2.mk b/package/vde2/vde2.mk
new file mode 100644
index 0000000..062835e
--- /dev/null
+++ b/package/vde2/vde2.mk
@@ -0,0 +1,36 @@
+#############################################################
+#
+# vde2
+#
+#############################################################
+
+VDE2_VERSION         = 2.3.2
+VDE2_SOURCE          = vde2-$(VDE2_VERSION).tar.bz2
+VDE2_SITE            = http://downloads.sourceforge.net/project/vde/vde2/$(VDE2_VERSION)
+VDE2_LICENSE         = GPLv2+ LGPLv2.1+ BSD-3c
+VDE2_LICENSE_FILES   = COPYING COPYING.libvdeplug COPYING.slirpvde
+VDE2_INSTALL_STAGING = YES
+
+# Reasons for enabling/disabling stuff:
+#?- tuntap is enabled in the hope we're using a recent-enough toolchain
+#   that does have if_tun.h (virtually everything these days)
+# - kvde_switch is disabled because it requires a patched kernel
+# - cryptcab is disabled to not depend on openSSL
+# - python is disabled to not depend on Python
+# - pcap is disabled to not depend on libpcap
+# - profiling is disabled because we do not want to debug/profile
+#
+# Note: disabled features can be added with corresponding dependencies
+#       in future commits.
+VDE2_CONF_OPT = --disable-experimental  \
+                --disable-cryptcab      \
+                --disable-pcap          \
+                --disable-python        \
+                --disable-profile       \
+                --disable-kernel-switch \
+                --enable-tuntap         \
+
+#?Package does not build in parallel due to improper make rules
+VDE2_MAKE = $(MAKE1)
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 01/20] package/vde2: new package

[Peter Korsgaard]

>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:

 Yann> VDE is an ethernet compliant virtual network that can be
 Yann> spawned over a set of physical computer over the Internet.

 Yann> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
 Yann> Cc: Arnout Vandecappelle <arnout@mind.be>
 Yann> ---
 Yann>  package/Config.in      |    1 +
 Yann>  package/vde2/Config.in |   10 ++++++++++
 Yann>  package/vde2/vde2.mk   |   36 ++++++++++++++++++++++++++++++++++++
 Yann>  3 files changed, 47 insertions(+), 0 deletions(-)
 Yann>  create mode 100644 package/vde2/Config.in
 Yann>  create mode 100644 package/vde2/vde2.mk

 Yann> diff --git a/package/Config.in b/package/Config.in
 Yann> index cad1221..2345b4b 100644
 Yann> --- a/package/Config.in
 Yann> +++ b/package/Config.in
 Yann> @@ -672,6 +672,7 @@ source "package/ttcp/Config.in"
 Yann>  source "package/udpcast/Config.in"
 Yann>  source "package/ulogd/Config.in"
 Yann>  source "package/ushare/Config.in"
 Yann> +source "package/vde2/Config.in"
 Yann>  source "package/vpnc/Config.in"
 Yann>  source "package/vsftpd/Config.in"
 Yann>  source "package/vtun/Config.in"
 Yann> diff --git a/package/vde2/Config.in b/package/vde2/Config.in
 Yann> new file mode 100644
 Yann> index 0000000..f344d67
 Yann> --- /dev/null
 Yann> +++ b/package/vde2/Config.in
 Yann> @@ -0,0 +1,10 @@
 Yann> +config BR2_PACKAGE_VDE2
 Yann> +	bool "vde2"
 Yann> +	help
 Yann> +	  VDE is an ethernet compliant virtual network that can be
 Yann> +	  spawned over a set of physical computers over the Internet.
 Yann> +	  VDE is part of the virtualsquare project.
 Yann> +	  
 Yann> +	  http://vde.sourceforge.net/
 Yann> +	  
 Yann> +	  Note: only the libraries are installed.

Wouldn't it then make more sense to put it under Libraries ->
Networking?

A quick test build seems to show that it needs C++ support:

checking whether the C++ compiler works... no
configure: error: in `/home/peko/source/buildroot/vdetest/build/vde2-2.3.2':
configure: error: C++ compiler cannot create executables
See `config.log' for more details

I don't see any C++ source files though, so it's probably better to drop
AC_PROG_CXX from configure.ac

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 01/20] package/vde2: new package

[Yann E. MORIN]

Peter, All,

On Friday 14 December 2012 Peter Korsgaard wrote:
>  Yann> diff --git a/package/vde2/Config.in b/package/vde2/Config.in
>  Yann> new file mode 100644
>  Yann> index 0000000..f344d67
>  Yann> --- /dev/null
>  Yann> +++ b/package/vde2/Config.in
>  Yann> @@ -0,0 +1,10 @@
>  Yann> +config BR2_PACKAGE_VDE2
>  Yann> +	bool "vde2"
>  Yann> +	help
>  Yann> +	  VDE is an ethernet compliant virtual network that can be
>  Yann> +	  spawned over a set of physical computers over the Internet.
>  Yann> +	  VDE is part of the virtualsquare project.
>  Yann> +	  
>  Yann> +	  http://vde.sourceforge.net/
>  Yann> +	  
>  Yann> +	  Note: only the libraries are installed.
> 
> Wouldn't it then make more sense to put it under Libraries ->
> Networking?

Nope, we also install the executable to drive the VDE switches. I'll remove
that sentenc from the help text, and leave vde2 in "Network Applications".

> A quick test build seems to show that it needs C++ support:
> 
> checking whether the C++ compiler works... no
> configure: error: in `/home/peko/source/buildroot/vdetest/build/vde2-2.3.2':
> configure: error: C++ compiler cannot create executables
> See `config.log' for more details
> 
> I don't see any C++ source files though, so it's probably better to drop
> AC_PROG_CXX from configure.ac

Yup, fixed.

Thank you!

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

[Buildroot] [PATCH 02/20] package/libiscsi: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 package/Config.in            |    1 +
 package/libiscsi/Config.in   |   12 ++++++++++++
 package/libiscsi/libiscsi.mk |   15 +++++++++++++++
 3 files changed, 28 insertions(+), 0 deletions(-)
 create mode 100644 package/libiscsi/Config.in
 create mode 100644 package/libiscsi/libiscsi.mk

diff --git a/package/Config.in b/package/Config.in
index 2345b4b..8edadf9 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -466,6 +466,7 @@ source "package/libesmtp/Config.in"
 source "package/libeXosip2/Config.in"
 source "package/libfcgi/Config.in"
 source "package/libidn/Config.in"
+source "package/libiscsi/Config.in"
 source "package/liboauth/Config.in"
 source "package/libmicrohttpd/Config.in"
 source "package/neon/Config.in"
diff --git a/package/libiscsi/Config.in b/package/libiscsi/Config.in
new file mode 100644
index 0000000..f3fc29e
--- /dev/null
+++ b/package/libiscsi/Config.in
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_LIBISCSI
+	bool "libiscsi"
+	select BR2_PACKAGE_POPT
+	help
+	  Libiscsi is a client-side library to implement the iSCSI protocol
+	  that can be used to access resource of an iSCSI Target.
+	  
+	  The library is fully async with regards to iscsi commands and scsi
+	  tasks, but a sync layer is also provided for ease of use for simpler
+	  applications.
+	  
+	  https://github.com/sahlberg/libiscsi  (no proper homepage)
diff --git a/package/libiscsi/libiscsi.mk b/package/libiscsi/libiscsi.mk
new file mode 100644
index 0000000..bfebd7e
--- /dev/null
+++ b/package/libiscsi/libiscsi.mk
@@ -0,0 +1,15 @@
+#############################################################
+#
+# libiscsi
+#
+#############################################################
+
+LIBISCSI_VERSION         = 1.6.0
+LIBISCSI_SOURCE          = libiscsi-$(LIBISCSI_VERSION).tar.gz
+LIBISCSI_SITE            = https://github.com/downloads/sahlberg/libiscsi
+LIBISCSI_LICENSE         = GPLv2+ LGPLv2.1+
+LIBISCSI_LICENSE_FILES   = COPYING LICENCE-GPL-2.txt LICENCE-LGPL-2.1.txt
+LIBISCSI_INSTALL_STAGING = YES
+LIBISCSI_DEPENDENCIES    = popt
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 02/20] package/libiscsi: new package

[Peter Korsgaard]

>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:

 Yann> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
 Yann> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Committed, thanks.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 03/20] package/usbredir: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
---
 package/Config.in            |    1 +
 package/usbredir/Config.in   |   28 ++++++++++++++++++++++++++++
 package/usbredir/usbredir.mk |   31 +++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+), 0 deletions(-)
 create mode 100644 package/usbredir/Config.in
 create mode 100644 package/usbredir/usbredir.mk

diff --git a/package/Config.in b/package/Config.in
index 8edadf9..9d68581 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -492,6 +492,7 @@ source "package/libupnp/Config.in"
 source "package/libvncserver/Config.in"
 source "package/nss-mdns/Config.in"
 source "package/ortp/Config.in"
+source "package/usbredir/Config.in"
 source "package/zeromq/Config.in"
 endmenu
 
diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in
new file mode 100644
index 0000000..8d8ac5a
--- /dev/null
+++ b/package/usbredir/Config.in
@@ -0,0 +1,28 @@
+comment "usbredir requires libusb"
+	depends on !BR2_PACKAGE_LIBUSB
+
+config BR2_PACKAGE_USBREDIR
+	bool "usbredir"
+	depends on BR2_PACKAGE_LIBUSB
+	help
+	  usbredir is the name of a network protocol for sending usb device
+	  traffic over a network connection. It is also the name of the
+	  software package offering a parsing library, a usbredirhost library
+	  and several utilities implementing this protocol.
+	  
+	  Note: only the library is installed, not the utilities. Say 'y'
+	  below if you want the server too.
+	  
+	  http://www.spice-space.org/page/UsbRedir
+
+if BR2_PACKAGE_USBREDIR
+
+config BR2_PACKAGE_USBREDIR_SERVER
+	bool "usbredirserver on target"
+	help
+	  If you want to serve usbredir requests on your target, say 'y'
+	  here to have the usbredir server on the target.
+	  
+	  Note: the server is not required to use the library.
+
+endif
diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk
new file mode 100644
index 0000000..70b50c3
--- /dev/null
+++ b/package/usbredir/usbredir.mk
@@ -0,0 +1,31 @@
+#############################################################
+#
+# usbredir
+#
+#############################################################
+
+USBREDIR_VERSION         = 0.4.3
+USBREDIR_SOURCE          = usbredir-$(USBREDIR_VERSION).tar.bz2
+USBREDIR_SITE            = http://spice-space.org/download/usbredir
+USBREDIR_LICENSE         = LGPLv2.1+
+USBREDIR_LICENSE_FILES   = COPYING.LIB
+USBREDIR_INSTALL_STAGING = YES
+USBREDIR_DEPENDENCIES    = libusb
+
+USBREDIR_DEPENDENCIES    += host-pkgconf
+
+ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y)
+
+USBREDIR_LICENSE         += (for the library), GPLv2+ (for the server)
+USBREDIR_LICENSE_FILES   += COPYING
+
+else # BR2_PACKAGE_USBREDIR_SERVER != y
+
+define USBREDIR_POST_INSTALL_TARGET_RM_SERVER
+	rm -f $(TARGET_DIR)/usr/sbin/usbredirserver
+endef
+USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER
+
+endif # BR2_PACKAGE_USBREDIR_SERVER
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 03/20] package/usbredir: new package

[Peter Korsgaard]

>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:

 Yann> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
 Yann> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 Yann> Cc: Arnout Vandecappelle <arnout@mind.be>
 Yann> ---
 Yann>  package/Config.in            |    1 +
 Yann>  package/usbredir/Config.in   |   28 ++++++++++++++++++++++++++++
 Yann>  package/usbredir/usbredir.mk |   31 +++++++++++++++++++++++++++++++
 Yann>  3 files changed, 60 insertions(+), 0 deletions(-)
 Yann>  create mode 100644 package/usbredir/Config.in
 Yann>  create mode 100644 package/usbredir/usbredir.mk

 Yann> diff --git a/package/Config.in b/package/Config.in
 Yann> index 8edadf9..9d68581 100644
 Yann> --- a/package/Config.in
 Yann> +++ b/package/Config.in
 Yann> @@ -492,6 +492,7 @@ source "package/libupnp/Config.in"
 Yann>  source "package/libvncserver/Config.in"
 Yann>  source "package/nss-mdns/Config.in"
 Yann>  source "package/ortp/Config.in"
 Yann> +source "package/usbredir/Config.in"
 Yann>  source "package/zeromq/Config.in"
 Yann>  endmenu
 
 Yann> diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in
 Yann> new file mode 100644
 Yann> index 0000000..8d8ac5a
 Yann> --- /dev/null
 Yann> +++ b/package/usbredir/Config.in
 Yann> @@ -0,0 +1,28 @@
 Yann> +comment "usbredir requires libusb"
 Yann> +	depends on !BR2_PACKAGE_LIBUSB
 Yann> +

We normally use select for libraries. Any reason to not use it here?

 Yann> +USBREDIR_VERSION         = 0.4.3
 Yann> +USBREDIR_SOURCE          = usbredir-$(USBREDIR_VERSION).tar.bz2
 Yann> +USBREDIR_SITE            = http://spice-space.org/download/usbredir
 Yann> +USBREDIR_LICENSE         = LGPLv2.1+
 Yann> +USBREDIR_LICENSE_FILES   = COPYING.LIB
 Yann> +USBREDIR_INSTALL_STAGING = YES
 Yann> +USBREDIR_DEPENDENCIES    = libusb
 Yann> +
 Yann> +USBREDIR_DEPENDENCIES    += host-pkgconf

Any particular reason to not merge this line with the one above?

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 03/20] package/usbredir: new package

[Yann E. MORIN]

Peter, All,

On Friday 14 December 2012 13:53:37 Peter Korsgaard wrote:
> >>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:
>  Yann> diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in
>  Yann> new file mode 100644
>  Yann> index 0000000..8d8ac5a
>  Yann> --- /dev/null
>  Yann> +++ b/package/usbredir/Config.in
>  Yann> @@ -0,0 +1,28 @@
>  Yann> +comment "usbredir requires libusb"
>  Yann> +	depends on !BR2_PACKAGE_LIBUSB
>  Yann> +
> 
> We normally use select for libraries. Any reason to not use it here?

libusb depends on threads, and I do not want to play the game of
inheriting the dependencies of my own dependencies, and reproduce
the libffi mess.

libusb has a dependency I can not select, so I just depend on it.

>  Yann> +USBREDIR_DEPENDENCIES    += host-pkgconf
> 
> Any particular reason to not merge this line with the one above?

Probably no good reason, indeed.

Regards,
Yann E. MORIN.


-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +0/33 662376056 | Software  Designer | \ / CAMPAIGN     |   ^                |
| --==< O_o >==-- '------------.-------:  X  AGAINST      |  /e\  There is no  |
| http://ymorin.is-a-geek.org/ | (*_*) | / \ HTML MAIL    |  """  conspiracy.  |
'------------------------------'-------'------------------'--------------------'

[Buildroot] [PATCH 03/20] package/usbredir: new package

[Peter Korsgaard]

>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:

 Yann> +comment "usbredir requires libusb"
 Yann> +	depends on !BR2_PACKAGE_LIBUSB
 Yann> +
 >> 
 >> We normally use select for libraries. Any reason to not use it here?

 Yann> libusb depends on threads, and I do not want to play the game of
 Yann> inheriting the dependencies of my own dependencies, and reproduce
 Yann> the libffi mess.

 Yann> libusb has a dependency I can not select, so I just depend on it.

Ok, but that just moves the trouble higher up the stack. E.G. you want
to enable qemu, but it tells you that it needs usbredir so you go
hunting around for it only to discover that it needs libusb and finally
you see that you need threads support in your toolchain.

In other words, selects are more user friendly than depends
on. Most likely we have more users than developers, so we should
optimize for making things nice for users rather than devs.

I would prefer you select libusb.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 03/20] package/usbredir: new package

[Yann E. MORIN]

Peter, All,

On Friday 14 December 2012 Peter Korsgaard wrote:
> >>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:
> 
>  Yann> +comment "usbredir requires libusb"
>  Yann> +	depends on !BR2_PACKAGE_LIBUSB
>  Yann> +
>  >> 
>  >> We normally use select for libraries. Any reason to not use it here?
> 
>  Yann> libusb depends on threads, and I do not want to play the game of
>  Yann> inheriting the dependencies of my own dependencies, and reproduce
>  Yann> the libffi mess.
> 
>  Yann> libusb has a dependency I can not select, so I just depend on it.
[--SNIP--]
> I would prefer you select libusb.

Grudgingly done. ;-)

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'

[Buildroot] [PATCH 03/20] package/usbredir: new package

[Peter Korsgaard]

>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:

 >> I would prefer you select libusb.

 Yann> Grudgingly done. ;-)

Thanks ;)

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 04/20] package/celt051: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 package/multimedia/Config.in         |    1 +
 package/multimedia/celt051/Config.in |   15 +++++++++++++++
 package/multimedia/celt051/celt.mk   |   30 ++++++++++++++++++++++++++++++
 3 files changed, 46 insertions(+), 0 deletions(-)
 create mode 100644 package/multimedia/celt051/Config.in
 create mode 100644 package/multimedia/celt051/celt.mk

diff --git a/package/multimedia/Config.in b/package/multimedia/Config.in
index 273d9bc..5e8d60c 100644
--- a/package/multimedia/Config.in
+++ b/package/multimedia/Config.in
@@ -2,6 +2,7 @@ menu "Audio and video applications"
 source "package/multimedia/alsa-utils/Config.in"
 source "package/multimedia/aumix/Config.in"
 source "package/multimedia/bellagio/Config.in"
+source "package/multimedia/celt051/Config.in"
 source "package/multimedia/faad2/Config.in"
 source "package/multimedia/flac/Config.in"
 source "package/multimedia/ffmpeg/Config.in"
diff --git a/package/multimedia/celt051/Config.in b/package/multimedia/celt051/Config.in
new file mode 100644
index 0000000..50ed069
--- /dev/null
+++ b/package/multimedia/celt051/Config.in
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_CELT051
+	bool "celt051"
+	select BR2_PACKAGE_LIBOGG
+	help
+	  The CELT ultra-low delay audio codec
+	  
+	  The CELT codec is a compression algorithm for audio. Like MP3,
+	  Vorbis, and AAC it is suitable for transmitting music with high
+	  quality. Unlike these formats CELT imposes very little delay on
+	  the signal, even less than is typical for speech centric formats
+	  like Speex, GSM, or G.729.
+	  
+	  Note: this is version 0.5.1.3 of celt.
+	  
+	  http://www.celt-codec.org/
diff --git a/package/multimedia/celt051/celt.mk b/package/multimedia/celt051/celt.mk
new file mode 100644
index 0000000..9baaa82
--- /dev/null
+++ b/package/multimedia/celt051/celt.mk
@@ -0,0 +1,30 @@
+#############################################################
+#
+# celt051
+#
+#############################################################
+
+# Although version newer than 0.5.1.3 exists, we're
+# stuck with 0.5.1.3 for use by Spice (coming later)
+CELT051_VERSION         = 0.5.1.3
+CELT051_SOURCE          = celt-$(CELT051_VERSION).tar.gz
+CELT051_SITE            = http://downloads.xiph.org/releases/celt
+CELT051_LICENSE         = BSD-2c
+CELT051_LICENSE_FILES   = COPYING
+CELT051_INSTALL_STAGING = YES
+CELT051_DEPENDENCIES    = libogg
+
+# Need to specify --with-ogg, otherwise /usr/lib may be searched for
+# if target is the same kind as host (ie. same arch, same bitness,
+# same endianness, so that /usr/lib contains libraries linkable by
+# our cross-compiler)
+CELT051_CONF_OPT =                  \
+  --enable-fixed-point              \
+  --disable-fixed-point-debug       \
+  --disable-experimental-postfilter \
+  --disable-static-modes            \
+  --disable-assertions              \
+  --disable-oggtest                 \
+  --with-ogg=$(STAGING_DIR)/usr     \
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 05/20] package/python-pyparsing: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 package/Config.in                            |    1 +
 package/python-pyparsing/Config.in           |   11 +++++++
 package/python-pyparsing/python-pyparsing.mk |   38 ++++++++++++++++++++++++++
 3 files changed, 50 insertions(+), 0 deletions(-)
 create mode 100644 package/python-pyparsing/Config.in
 create mode 100644 package/python-pyparsing/python-pyparsing.mk

diff --git a/package/Config.in b/package/Config.in
index 9d68581..d00ebf3 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -307,6 +307,7 @@ source "package/python-netifaces/Config.in"
 source "package/python-nfc/Config.in"
 source "package/python-protobuf/Config.in"
 source "package/python-pygame/Config.in"
+source "package/python-pyparsing/Config.in"
 source "package/python-serial/Config.in"
 source "package/python-setuptools/Config.in"
 endmenu
diff --git a/package/python-pyparsing/Config.in b/package/python-pyparsing/Config.in
new file mode 100644
index 0000000..126dd0e
--- /dev/null
+++ b/package/python-pyparsing/Config.in
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_PYTHON_PYPARSING
+	bool "pyparsing"
+	depends on BR2_PACKAGE_PYTHON
+	help
+	  The pyparsing module is an alternative approach to creating and
+	  executing simple grammars, vs. the traditional lex/yacc approach,
+	  or the use of regular expressions. The pyparsing module provides
+	  a library of classes that client code uses to construct the grammar
+	  directly in Python code.
+	  
+	  http://pyparsing.wikispaces.com/
diff --git a/package/python-pyparsing/python-pyparsing.mk b/package/python-pyparsing/python-pyparsing.mk
new file mode 100644
index 0000000..246df4d
--- /dev/null
+++ b/package/python-pyparsing/python-pyparsing.mk
@@ -0,0 +1,38 @@
+#############################################################
+#
+# python-pyparsing
+#
+#############################################################
+
+PYTHON_PYPARSING_VERSION         = 1.5.6
+PYTHON_PYPARSING_SOURCE          = pyparsing-$(PYTHON_PYPARSING_VERSION).tar.gz
+PYTHON_PYPARSING_SITE            = http://downloads.sourceforge.net/project/pyparsing/pyparsing/pyparsing-$(PYTHON_PYPARSING_VERSION)
+PYTHON_PYPARSING_LICENSE         = MIT
+PYTHON_PYPARSING_LICENSE_FILES   = LICENSE
+PYTHON_PYPARSING_INSTALL_STAGING = YES
+PYTHON_PYPARSING_DEPENDENCIES    = python
+
+# Shamelessly vampirised from python-pygame ;-)
+define PYTHON_PYPARSING_BUILD_CMDS
+	(cd $(@D);                                              \
+	 CC="$(TARGET_CC)"                                      \
+	 CFLAGS="$(TARGET_CFLAGS)"                              \
+	 LDSHARED="$(TARGET_CROSS)gcc -shared"                  \
+	 CROSS_COMPILING=yes                                    \
+	 _python_sysroot=$(STAGING_DIR)                         \
+	 _python_srcdir=$(BUILD_DIR)/python$(PYTHON_VERSION)    \
+	 _python_prefix=/usr                                    \
+	 _python_exec_prefix=/usr                               \
+	 $(HOST_DIR)/usr/bin/python setup.py build              \
+	)
+endef
+
+# Shamelessly vampirised from python-pygame ;-)
+define PYTHON_PYPARSING_INSTALL_TARGET_CMDS
+	(cd $(@D);                                              \
+	 $(HOST_DIR)/usr/bin/python setup.py install            \
+	                            --prefix=$(TARGET_DIR)/usr  \
+	)
+endef
+
+$(eval $(generic-package))
-- 
1.7.2.5

[Buildroot] [PATCH 06/20] package/cegui06: new package

[Yann E. MORIN]

Although there are more recent versions of CEGUI, we are stuck
with 0.6.2b for use by spice.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
---
 package/Config.in                      |    1 +
 package/cegui06/Config.in              |   15 +++++++++++++
 package/cegui06/cegui06-stddef.h.patch |   26 +++++++++++++++++++++++
 package/cegui06/cegui06.mk             |   36 ++++++++++++++++++++++++++++++++
 4 files changed, 78 insertions(+), 0 deletions(-)
 create mode 100644 package/cegui06/Config.in
 create mode 100644 package/cegui06/cegui06-stddef.h.patch
 create mode 100644 package/cegui06/cegui06.mk

diff --git a/package/Config.in b/package/Config.in
index d00ebf3..61e1d60d 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -109,6 +109,7 @@ comment "Graphic applications"
 source "package/rrdtool/Config.in"
 
 comment "graphic libraries"
+source "package/cegui06/Config.in"
 source "package/directfb/Config.in"
 source "package/directfb-examples/Config.in"
 source "package/divine/Config.in"
diff --git a/package/cegui06/Config.in b/package/cegui06/Config.in
new file mode 100644
index 0000000..54d92ed
--- /dev/null
+++ b/package/cegui06/Config.in
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_CEGUI06
+	bool "cegui06"
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	select BR2_PACKAGE_EXPAT
+	select BR2_PACKAGE_FREETYPE
+	select BR2_PACKAGE_PCRE
+	help
+	  Crazy Eddie's GUI System is a free library providing windowing and
+	  widgets for graphics APIs / engines where such functionality is not
+	  natively available, or severely lacking. The library is object
+	  orientated, written in C++, and targeted at games developers who
+	  should be spending their time creating great games, not building
+	  GUI sub-systems!
+	  
+	  http://www.cegui.org.uk/
diff --git a/package/cegui06/cegui06-stddef.h.patch b/package/cegui06/cegui06-stddef.h.patch
new file mode 100644
index 0000000..cc16eff
--- /dev/null
+++ b/package/cegui06/cegui06-stddef.h.patch
@@ -0,0 +1,26 @@
+includes: ptrdiff_t is defined in stddef.h
+
+ptrdiff_t is defined in the stddef.h header, so this
+header must be included.
+
+Do the #include in a common header to avoid doing it
+all over the place.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+---
+Patch not sent upstream, it's a no-longer-maintained branch.
+To be noted, however, is that the current devel branch is
+still missing that include.
+
+diff -durN cegui06-0.6.2.orig/include/CEGUIBase.h cegui06-0.6.2/include/CEGUIBase.h
+--- cegui06-0.6.2.orig//include/CEGUIBase.h	2008-02-11 15:38:27.000000000 +0100
++++ cegui06-0.6.2/include/CEGUIBase.h	2012-08-19 22:51:50.260385978 +0200
+@@ -34,6 +34,7 @@
+ #define _CEGUIBase_h_
+ 
+ #include <cassert>
++#include <stddef.h>
+ 
+ // bring in configuration options
+ #include "CEGUIConfig.h"
diff --git a/package/cegui06/cegui06.mk b/package/cegui06/cegui06.mk
new file mode 100644
index 0000000..817254f
--- /dev/null
+++ b/package/cegui06/cegui06.mk
@@ -0,0 +1,36 @@
+#############################################################
+#
+# libcegui
+#
+#############################################################
+
+# Do not update the version, we need exactly that one for Spice.
+CEGUI06_VERSION_MAJOR   = 0.6.2
+CEGUI06_VERSION         = $(CEGUI06_VERSION_MAJOR)b
+CEGUI06_SOURCE          = CEGUI-$(CEGUI06_VERSION).tar.gz
+CEGUI06_SITE            = http://downloads.sourceforge.net/project/crayzedsgui/CEGUI%20Mk-2/$(CEGUI06_VERSION_MAJOR)
+CEGUI06_LICENSE         = MIT
+CEGUI06_LICENSE_FILES   = COPYING
+CEGUI06_INSTALL_STAGING = YES
+
+CEGUI06_DEPENDENCIES    =       \
+    expat                       \
+    freetype                    \
+    pcre                        \
+
+CEGUI06_CONF_OPT =              \
+    --enable-expat              \
+    --disable-external-tinyxml  \
+    --disable-xerces-c          \
+    --disable-libxml            \
+    --disable-tinyxml           \
+    --disable-opengl-renderer   \
+    --disable-external-glew     \
+    --disable-irrlicht-renderer \
+    --disable-directfb-renderer \
+    --disable-samples           \
+    --disable-lua-module        \
+    --disable-toluacegui        \
+    --disable-external-toluapp  \
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 07/20] package/slirp: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 package/Config.in       |    1 +
 package/slirp/Config.in |   25 +++++++++++++++++++++++++
 package/slirp/slirp.mk  |   21 +++++++++++++++++++++
 3 files changed, 47 insertions(+), 0 deletions(-)
 create mode 100644 package/slirp/Config.in
 create mode 100644 package/slirp/slirp.mk

diff --git a/package/Config.in b/package/Config.in
index 61e1d60d..6bdfa2b 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -494,6 +494,7 @@ source "package/libupnp/Config.in"
 source "package/libvncserver/Config.in"
 source "package/nss-mdns/Config.in"
 source "package/ortp/Config.in"
+source "package/slirp/Config.in"
 source "package/usbredir/Config.in"
 source "package/zeromq/Config.in"
 endmenu
diff --git a/package/slirp/Config.in b/package/slirp/Config.in
new file mode 100644
index 0000000..dedded3
--- /dev/null
+++ b/package/slirp/Config.in
@@ -0,0 +1,25 @@
+config BR2_PACKAGE_SLIRP
+	bool "slirp"
+	help
+	  The Spice project aims to provide a complete open source
+	  solution for interaction with virtualized desktop devices.
+	  The Spice project deals with both the virtualized devices
+	  and the front-end. Interaction between front-end and
+	  back-end is done using VD-Interfaces.
+	  
+	  This package implements the slirp-part for Spice.
+	  Slirp emulates a PPP or SLIP connection over a normal terminal.
+	  
+	  http://www.spice-space.org/
+	  
+	  NOTE:
+	  This package has some history of a unique kind:
+	    - originally developped as 'slirp' by Danny Gasparovski, and
+	      seemingly abandonned (developper /disapeared/)
+	    - then re-maintained at sourceforge by "Kelly", up to some
+	      time around 2009: http://slirp.sourceforge.net/
+	    - during that period, QEMU (Fabrice BELLARD) forked the code
+	      and included it in QEMU
+	    - and it was imported from this breed by the Spice project
+	      around May 2009
+	    - which is what we use here
diff --git a/package/slirp/slirp.mk b/package/slirp/slirp.mk
new file mode 100644
index 0000000..b3f4bcd
--- /dev/null
+++ b/package/slirp/slirp.mk
@@ -0,0 +1,21 @@
+#############################################################
+#
+# Spice-slirp
+#
+#############################################################
+
+# There's no tarball releases of slirp, so we use the git repo
+# Also, there's no tag, so we use a random SHA1 (master's HEAD
+# of today)
+SLIRP_VERSION         = 8c2da74c1385242f20799fec8c04f8378edc6550
+SLIRP_SITE            = git://anongit.freedesktop.org/spice/slirp
+SLIRP_LICENSE         = BSD-4c BSD-2c
+# Note: The license file 'COPYRIGHT' is missing from the sources,
+# although some files refer to it.
+SLIRP_INSTALL_STAGING = YES
+
+# As we're using the git tree, there's no ./configure,
+# so we need to autoreconf.
+SLIRP_AUTORECONF      = YES
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 08/20] package/spice-protocol: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
 package/Config.in                        |    1 +
 package/spice-protocol/Config.in         |   12 ++++++++++++
 package/spice-protocol/spice-protocol.mk |   14 ++++++++++++++
 3 files changed, 27 insertions(+), 0 deletions(-)
 create mode 100644 package/spice-protocol/Config.in
 create mode 100644 package/spice-protocol/spice-protocol.mk

diff --git a/package/Config.in b/package/Config.in
index 6bdfa2b..f0de519 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -662,6 +662,7 @@ source "package/ser2net/Config.in"
 source "package/socat/Config.in"
 source "package/socketcand/Config.in"
 source "package/spawn-fcgi/Config.in"
+source "package/spice-protocol/Config.in"
 source "package/squid/Config.in"
 source "package/stunnel/Config.in"
 source "package/tcpdump/Config.in"
diff --git a/package/spice-protocol/Config.in b/package/spice-protocol/Config.in
new file mode 100644
index 0000000..b354361
--- /dev/null
+++ b/package/spice-protocol/Config.in
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_SPICE_PROTOCOL
+	bool "spice protocol"
+	help
+	  The Spice project aims to provide a complete open source
+	  solution for interaction with virtualized desktop devices.
+	  The Spice project deals with both the virtualized devices
+	  and the front-end. Interaction between front-end and
+	  back-end is done using VD-Interfaces.
+	  
+	  This package implements the protocol-part of Spice.
+	  
+	  http://www.spice-space.org/
diff --git a/package/spice-protocol/spice-protocol.mk b/package/spice-protocol/spice-protocol.mk
new file mode 100644
index 0000000..dcfe50d
--- /dev/null
+++ b/package/spice-protocol/spice-protocol.mk
@@ -0,0 +1,14 @@
+#############################################################
+#
+# Spice-protocol
+#
+#############################################################
+
+SPICE_PROTOCOL_VERSION         = 0.12.2
+SPICE_PROTOCOL_SOURCE          = spice-protocol-$(SPICE_PROTOCOL_VERSION).tar.bz2
+SPICE_PROTOCOL_SITE            = http://www.spice-space.org/download/releases/
+SPICE_PROTOCOL_LICENSE         = BSD-3c
+SPICE_PROTOCOL_LICENSE_FILES   = COPYING
+SPICE_PROTOCOL_INSTALL_STAGING = YES
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 09/20] package/spice: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
 package/Config.in       |    1 +
 package/spice/Config.in |   23 +++++++++++++++++
 package/spice/spice.mk  |   62 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 86 insertions(+), 0 deletions(-)
 create mode 100644 package/spice/Config.in
 create mode 100644 package/spice/spice.mk

diff --git a/package/Config.in b/package/Config.in
index f0de519..79a1342 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -663,6 +663,7 @@ source "package/socat/Config.in"
 source "package/socketcand/Config.in"
 source "package/spawn-fcgi/Config.in"
 source "package/spice-protocol/Config.in"
+source "package/spice/Config.in"
 source "package/squid/Config.in"
 source "package/stunnel/Config.in"
 source "package/tcpdump/Config.in"
diff --git a/package/spice/Config.in b/package/spice/Config.in
new file mode 100644
index 0000000..086b1bc
--- /dev/null
+++ b/package/spice/Config.in
@@ -0,0 +1,23 @@
+comment "spice server depends on python (for pyparsing)"
+	depends on !BR2_PACKAGE_PYTHON
+
+config BR2_PACKAGE_SPICE
+	bool "spice server"
+	depends on BR2_PACKAGE_PYTHON
+	select BR2_PACKAGE_ALSA_LIB
+	select BR2_PACKAGE_CELT051
+	select BR2_PACKAGE_JPEG
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_PIXMAN
+	select BR2_PACKAGE_PYTHON_PYPARSING
+	select BR2_PACKAGE_SPICE_PROTOCOL
+	help
+	  The Spice project aims to provide a complete open source
+	  solution for interaction with virtualized desktop devices.
+	  The Spice project deals with both the virtualized devices
+	  and the front-end. Interaction between front-end and
+	  back-end is done using VD-Interfaces.
+	  
+	  This package implements the server-part of Spice.
+	  
+	  http://www.spice-space.org/
diff --git a/package/spice/spice.mk b/package/spice/spice.mk
new file mode 100644
index 0000000..2752b8a
--- /dev/null
+++ b/package/spice/spice.mk
@@ -0,0 +1,62 @@
+#############################################################
+#
+# Spice
+#
+#############################################################
+
+SPICE_VERSION         = 0.12.0
+SPICE_SOURCE          = spice-$(SPICE_VERSION).tar.bz2
+SPICE_SITE            = http://www.spice-space.org/download/releases/
+SPICE_LICENSE         = LGPLv2.1+
+SPICE_LICENSE_FILES   = COPYING
+SPICE_INSTALL_STAGING = YES
+SPICE_DEPENDENCIES    = \
+    alsa-lib            \
+    celt051             \
+    jpeg                \
+    openssl             \
+    pixman              \
+    python-pyparsing    \
+    spice-protocol      \
+
+# We disable everything for now, because the dependency tree can become
+# quite deep if we try to enable some features, and I have not tested that.
+SPICE_CONF_OPT =            \
+  --disable-tunnel          \
+  --disable-gui             \
+  --disable-opengl          \
+  --disable-smartcard       \
+  --disable-client          \
+  --disable-automated-tests \
+  --without-sasl            \
+
+SPICE_DEPENDENCIES += host-pkgconf
+
+SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
+SPICE_MAKE_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
+
+# We need to tweak spice.pc because it /forgets/ (for static linking) that
+# it should link against libz and libjpeg. libz is pkg-config-aware, while
+# libjpeg isn't, hence the two-line tweak
+define SPICE_POST_INSTALL_STAGING_FIX_PC
+	$(SED) 's/^\(Requires.private:.*\)$$/\1 zlib/; s/^\(Libs.private:.*\)$$/\1 -ljpeg/;'    \
+	       "$(STAGING_DIR)/usr/lib/pkgconfig/spice-server.pc"
+endef
+SPICE_POST_INSTALL_STAGING_HOOKS += SPICE_POST_INSTALL_STAGING_FIX_PC
+
+# It is currently not possible to detect if stack-protection is available
+# or not, because it requires support from both the compiler *and* the
+# C library, but the C library (eg. uClibc) can be compiled without that
+# support, even if gcc accepts the -fstack-protector-all option.
+# spice's ./configure only checks for gcc's -fstack-protector-all option,
+# so it misses the case where the C library doe not provide the requires
+# support.
+# A correct fix would be to fix spice's ./configure to also check the C
+# library, but it might be much more involved.
+# So, we simply disable it for now. After all, as uClibc's help puts it:
+#     Note that NOEXECSTACK on a kernel with address space randomization
+#     is generally sufficient to prevent most buffer overflow exploits
+#     without increasing code size.
+SPICE_CONF_OPT += gl_cv_warn__fstack_protector_all=no
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 10/20] package/spice: enable client

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
 package/spice/Config.in |   13 +++++++++++++
 package/spice/spice.mk  |    8 +++++++-
 2 files changed, 20 insertions(+), 1 deletions(-)

diff --git a/package/spice/Config.in b/package/spice/Config.in
index 086b1bc..aacc779 100644
--- a/package/spice/Config.in
+++ b/package/spice/Config.in
@@ -21,3 +21,16 @@ config BR2_PACKAGE_SPICE
 	  This package implements the server-part of Spice.
 	  
 	  http://www.spice-space.org/
+
+if BR2_PACKAGE_SPICE
+
+comment "client depends on X.org"
+	depends on !BR2_PACKAGE_XORG7
+
+config BR2_PACKAGE_SPICE_CLIENT
+	bool "Enable client"
+	depends on BR2_PACKAGE_XORG7
+	select BR2_PACKAGE_XLIB_LIBXFIXES
+	select BR2_PACKAGE_XLIB_LIBXRANDR
+
+endif # BR2_PACKAGE_SPICE
diff --git a/package/spice/spice.mk b/package/spice/spice.mk
index 2752b8a..2f7fc20 100644
--- a/package/spice/spice.mk
+++ b/package/spice/spice.mk
@@ -26,12 +26,18 @@ SPICE_CONF_OPT =            \
   --disable-gui             \
   --disable-opengl          \
   --disable-smartcard       \
-  --disable-client          \
   --disable-automated-tests \
   --without-sasl            \
 
 SPICE_DEPENDENCIES += host-pkgconf
 
+ifeq ($(BR2_PACKAGE_SPICE_CLIENT),y)
+SPICE_CONF_OPT += --enable-client
+SPICE_DEPENDENCIES += xlib_libXfixes xlib_libXrandr
+else
+SPICE_CONF_OPT += --disable-client
+endif
+
 SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
 SPICE_MAKE_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
 
-- 
1.7.2.5

[Buildroot] [PATCH 11/20] package/spice: enable GUI

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
 package/spice/Config.in |    8 ++++++++
 package/spice/spice.mk  |    8 +++++++-
 2 files changed, 15 insertions(+), 1 deletions(-)

diff --git a/package/spice/Config.in b/package/spice/Config.in
index aacc779..08c3893 100644
--- a/package/spice/Config.in
+++ b/package/spice/Config.in
@@ -33,4 +33,12 @@ config BR2_PACKAGE_SPICE_CLIENT
 	select BR2_PACKAGE_XLIB_LIBXFIXES
 	select BR2_PACKAGE_XLIB_LIBXRANDR
 
+config BR2_PACKAGE_SPICE_GUI
+	bool "Enable GUI"
+	depends on BR2_PACKAGE_SPICE_CLIENT
+	select BR2_PACKAGE_CEGUI06
+	help
+	  Say 'y' here to enable the Graphical User Interface (GUI)
+	  start dialog.
+
 endif # BR2_PACKAGE_SPICE
diff --git a/package/spice/spice.mk b/package/spice/spice.mk
index 2f7fc20..0a5c58e 100644
--- a/package/spice/spice.mk
+++ b/package/spice/spice.mk
@@ -23,7 +23,6 @@ SPICE_DEPENDENCIES    = \
 # quite deep if we try to enable some features, and I have not tested that.
 SPICE_CONF_OPT =            \
   --disable-tunnel          \
-  --disable-gui             \
   --disable-opengl          \
   --disable-smartcard       \
   --disable-automated-tests \
@@ -38,6 +37,13 @@ else
 SPICE_CONF_OPT += --disable-client
 endif
 
+ifeq ($(BR2_PACKAGE_SPICE_GUI),y)
+SPICE_CONF_OPT += --enable-gui
+SPICE_DEPENDENCIES += cegui06
+else
+SPICE_CONF_OPT += --disable-gui
+endif
+
 SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
 SPICE_MAKE_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
 
-- 
1.7.2.5

[Buildroot] [PATCH 12/20] package/spice: enable slirp support

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
 package/spice/Config.in |    7 +++++++
 package/spice/spice.mk  |    8 +++++++-
 2 files changed, 14 insertions(+), 1 deletions(-)

diff --git a/package/spice/Config.in b/package/spice/Config.in
index 08c3893..b1e187a 100644
--- a/package/spice/Config.in
+++ b/package/spice/Config.in
@@ -41,4 +41,11 @@ config BR2_PACKAGE_SPICE_GUI
 	  Say 'y' here to enable the Graphical User Interface (GUI)
 	  start dialog.
 
+config BR2_PACKAGE_SPICE_TUNNEL
+	bool "Enable network redirection"
+	select BR2_PACKAGE_SLIRP
+	help
+	  Say 'y' here to enable network redirection, aka tunnelling
+	  through a SLIP/SLIRP session.
+
 endif # BR2_PACKAGE_SPICE
diff --git a/package/spice/spice.mk b/package/spice/spice.mk
index 0a5c58e..78ca202 100644
--- a/package/spice/spice.mk
+++ b/package/spice/spice.mk
@@ -22,7 +22,6 @@ SPICE_DEPENDENCIES    = \
 # We disable everything for now, because the dependency tree can become
 # quite deep if we try to enable some features, and I have not tested that.
 SPICE_CONF_OPT =            \
-  --disable-tunnel          \
   --disable-opengl          \
   --disable-smartcard       \
   --disable-automated-tests \
@@ -44,6 +43,13 @@ else
 SPICE_CONF_OPT += --disable-gui
 endif
 
+ifeq ($(BR2_PACKAGE_SPICE_TUNNEL),y)
+SPICE_CONF_OPT += --enable-tunnel
+SPICE_DEPENDENCIES += slirp
+else
+SPICE_CONF_OPT += --disable-tunnel
+endif
+
 SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
 SPICE_MAKE_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
 
-- 
1.7.2.5

[Buildroot] [PATCH 13/20] package/libseccomp: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
 package/Config.in                                  |    1 +
 package/libseccomp/Config.in                       |   13 +++++++++++
 ...ibseccomp-use-system-headers-from-sysroot.patch |   17 +++++++++++++++
 package/libseccomp/libseccomp.mk                   |   22 ++++++++++++++++++++
 4 files changed, 53 insertions(+), 0 deletions(-)
 create mode 100644 package/libseccomp/Config.in
 create mode 100644 package/libseccomp/libseccomp-use-system-headers-from-sysroot.patch
 create mode 100644 package/libseccomp/libseccomp.mk

diff --git a/package/Config.in b/package/Config.in
index 79a1342..6ab638d 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -521,6 +521,7 @@ source "package/libical/Config.in"
 source "package/libnspr/Config.in"
 source "package/libsigc/Config.in"
 source "package/libtpl/Config.in"
+source "package/libseccomp/Config.in"
 source "package/liburcu/Config.in"
 source "package/linux-pam/Config.in"
 source "package/lttng-libust/Config.in"
diff --git a/package/libseccomp/Config.in b/package/libseccomp/Config.in
new file mode 100644
index 0000000..183cf4e
--- /dev/null
+++ b/package/libseccomp/Config.in
@@ -0,0 +1,13 @@
+config BR2_PACKAGE_LIBSECCOMP
+	bool "libseccomp"
+	help
+	  High level interface to the Linux Kernel's seccomp filter 
+	  
+	  The libseccomp library provides and easy to use, platform independent,
+	  interface to the Linux Kernel's syscall filtering mechanism: seccomp.
+	  The libseccomp API is designed to abstract away the underlying BPF
+	  based syscall filter language and present a more conventional
+	  function-call based filtering interface that should be familiar to,
+	  and easily adopted by application developers.
+	  
+	  http://sourceforge.net/projects/libseccomp/
diff --git a/package/libseccomp/libseccomp-use-system-headers-from-sysroot.patch b/package/libseccomp/libseccomp-use-system-headers-from-sysroot.patch
new file mode 100644
index 0000000..0997edd
--- /dev/null
+++ b/package/libseccomp/libseccomp-use-system-headers-from-sysroot.patch
@@ -0,0 +1,17 @@
+configure: check headers in sysroot, not in host's system headers
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+diff -durN libseccomp-1.0.0.orig/configure libseccomp-1.0.0/configure
+--- libseccomp-1.0.0.orig/configure	2012-07-27 22:35:05.000000000 +0200
++++ libseccomp-1.0.0/configure	2012-10-27 00:12:50.739196219 +0200
+@@ -205,7 +205,8 @@
+ #
+ 
+ # system seccomp includes
+-if [[ -r "/usr/include/linux/seccomp.h" ]]; then
++# ${SYSROOT} added by buildroot for cross-compilation
++if [[ -r "${SYSROOT}/usr/include/linux/seccomp.h" ]]; then
+ 	opt_sysinc_seccomp="yes"
+ else
+ 	opt_sysinc_seccomp="no"
diff --git a/package/libseccomp/libseccomp.mk b/package/libseccomp/libseccomp.mk
new file mode 100644
index 0000000..73fe632
--- /dev/null
+++ b/package/libseccomp/libseccomp.mk
@@ -0,0 +1,22 @@
+#############################################################
+#
+# libseccomp
+#
+#############################################################
+
+LIBSECCOMP_VERSION         = 1.0.0
+LIBSECCOMP_SOURCE          = libseccomp-$(LIBSECCOMP_VERSION).tar.gz
+LIBSECCOMP_SITE            = http://downloads.sourceforge.net/project/libseccomp
+LIBSECCOMP_LICENSE         = LGPLv2.1
+LIBSECCOMP_LICENSE_FILES   = LICENSE
+LIBSECCOMP_INSTALL_STAGING = YES
+
+# Needed for configure to find our system headers:
+LIBSECCOMP_CONF_ENV            = SYSROOT=$(STAGING_DIR)
+LIBSECCOMP_MAKE_ENV            = $(TARGET_CONFIGURE_OPTS)
+LIBSECCOMP_MAKE_OPT            = SUBDIRS_BUILD=src
+LIBSECCOMP_INSTALL_STAGING_OPT = SUBDIRS_BUILD=src SUBDIRS_INSTALL="src include" DESTDIR=$(STAGING_DIR) install
+LIBSECCOMP_INSTALL_TARGET_OPT  = SUBDIRS_BUILD=src SUBDIRS_INSTALL="src include" DESTDIR=$(TARGET_DIR) install
+
+# Not a real autotools package, but works quite OK nonetheless
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 14/20] package/keyutils: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jarkko Sakkinen <jarkko.sakkinen@iki.fi>
---
 package/Config.in                                  |    1 +
 package/keyutils/Config.in                         |    7 ++
 .../keyutils-01-memleak-from-realloc.patch         |   51 +++++++++++++++
 package/keyutils/keyutils-02-another-memleak.patch |   32 ++++++++++
 package/keyutils/keyutils-03-cifs.patch            |   15 +++++
 .../keyutils-04-Makefile-for-buildroot.patch       |   65 ++++++++++++++++++++
 .../keyutils/keyutils-05-fix-install-rule.patch    |   19 ++++++
 package/keyutils/keyutils.mk                       |   32 ++++++++++
 8 files changed, 222 insertions(+), 0 deletions(-)
 create mode 100644 package/keyutils/Config.in
 create mode 100644 package/keyutils/keyutils-01-memleak-from-realloc.patch
 create mode 100644 package/keyutils/keyutils-02-another-memleak.patch
 create mode 100644 package/keyutils/keyutils-03-cifs.patch
 create mode 100644 package/keyutils/keyutils-04-Makefile-for-buildroot.patch
 create mode 100644 package/keyutils/keyutils-05-fix-install-rule.patch
 create mode 100644 package/keyutils/keyutils.mk

diff --git a/package/Config.in b/package/Config.in
index 6ab638d..c90fcd8 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -738,6 +738,7 @@ endif
 source "package/bwm-ng/Config.in"
 source "package/cpuload/Config.in"
 source "package/htop/Config.in"
+source "package/keyutils/Config.in"
 source "package/kmod/Config.in"
 if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
 source "package/module-init-tools/Config.in"
diff --git a/package/keyutils/Config.in b/package/keyutils/Config.in
new file mode 100644
index 0000000..9b5a24b
--- /dev/null
+++ b/package/keyutils/Config.in
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_KEYUTILS
+	bool "keyutils"
+	help
+	  These tools are used to control the key management system
+	  built into the Linux kernel.
+	  
+	  http://people.redhat.com/~dhowells/keyutils/
diff --git a/package/keyutils/keyutils-01-memleak-from-realloc.patch b/package/keyutils/keyutils-01-memleak-from-realloc.patch
new file mode 100644
index 0000000..0faa9d8
--- /dev/null
+++ b/package/keyutils/keyutils-01-memleak-from-realloc.patch
@@ -0,0 +1,51 @@
+Patch vampirised from Debian's packaging of keyutils-1.4
+
+Author: Michael Gebetsroither <gebi@grml.org>
+Description: Fixed memleak from realloc (Closes: #496466).
+
+diff -Naurp keyutils.orig/keyutils.c keyutils/keyutils.c
+--- keyutils.orig/keyutils.c	2008-08-09 21:46:52.000000000 +0200
++++ keyutils/keyutils.c	2008-08-25 13:38:07.000000000 +0200
+@@ -165,6 +165,24 @@ long keyctl_assume_authority(key_serial_
+ 	return keyctl(KEYCTL_ASSUME_AUTHORITY, id);
+ }
+ 
++
++/*****************************************************************************/
++/*
++ * plain realloc is just crazy
++ */
++static void* __xrealloc(void* ptr, size_t size)
++{
++    void* ret;
++
++    ret = realloc(ptr, size);
++    if(!ret) {
++        free(ptr);
++        return 0;
++    }
++    return ret;
++}
++
++
+ /*****************************************************************************/
+ /*
+  * fetch key description into an allocated buffer
+@@ -194,7 +212,7 @@ int keyctl_describe_alloc(key_serial_t i
+ 			break;
+ 
+ 		buflen = ret;
+-		buf = realloc(buf, buflen);
++		buf = __xrealloc(buf, buflen);
+ 		if (!buf)
+ 			return -1;
+ 	}
+@@ -233,7 +251,7 @@ int keyctl_read_alloc(key_serial_t id, v
+ 			break;
+ 
+ 		buflen = ret;
+-		buf = realloc(buf, buflen + 1);
++		buf = __xrealloc(buf, buflen + 1);
+ 		if (!buf)
+ 			return -1;
+ 	}
diff --git a/package/keyutils/keyutils-02-another-memleak.patch b/package/keyutils/keyutils-02-another-memleak.patch
new file mode 100644
index 0000000..f74fd79
--- /dev/null
+++ b/package/keyutils/keyutils-02-another-memleak.patch
@@ -0,0 +1,32 @@
+Patch vampirised from Debian's packaging of keyutils-1.4
+
+Author: Michael Gebetsroither <gebi@grml.org>
+Description: Fixed another memleak (Closes: #496466).
+
+diff -Naurp keyutils.orig/keyutils.c keyutils/keyutils.c
+--- keyutils.orig/keyutils.c	2008-08-09 21:46:52.000000000 +0200
++++ keyutils/keyutils.c	2008-08-25 13:38:25.000000000 +0200
+@@ -187,8 +187,10 @@ int keyctl_describe_alloc(key_serial_t i
+ 
+ 	for (;;) {
+ 		ret = keyctl_describe(id, buf, buflen);
+-		if (ret < 0)
++		if (ret < 0) {
++            free(buf);
+ 			return -1;
++        }
+ 
+ 		if (buflen >= ret)
+ 			break;
+@@ -226,8 +228,10 @@ int keyctl_read_alloc(key_serial_t id, v
+ 
+ 	for (;;) {
+ 		ret = keyctl_read(id, buf, buflen);
+-		if (ret < 0)
++		if (ret < 0) {
++            free(buf);
+ 			return -1;
++        }
+ 
+ 		if (buflen >= ret)
+ 			break;
diff --git a/package/keyutils/keyutils-03-cifs.patch b/package/keyutils/keyutils-03-cifs.patch
new file mode 100644
index 0000000..b2903f9
--- /dev/null
+++ b/package/keyutils/keyutils-03-cifs.patch
@@ -0,0 +1,15 @@
+Patch vampirised from Debian's packaging of keyutils-1.4
+
+Author: Marcus Meissner <meissner@suse.de>
+Description: Added 2 cifs helpers to request-key.conf (for CIFS DFS support)
+
+diff -Naurp keyutils.orig/request-key.conf keyutils/request-key.conf
+--- keyutils.orig/request-key.conf	2008-09-07 23:53:10.000000000 +0000
++++ keyutils/request-key.conf	2009-02-05 00:53:00.000000000 +0000
+@@ -34,4 +34,6 @@
+ create	user	debug:*		negate		/bin/keyctl negate %k 30 %S
+ create	user	debug:loop:*	*		|/bin/cat
+ create	user	debug:*		*		/usr/share/keyutils/request-key-debug.sh %k %d %c %S
++create	cifs.spnego	*	*		/usr/sbin/cifs.upcall -c %k
++create	dns_resolver	*	*		/usr/sbin/cifs.upcall %k
+ negate	*	*		*		/bin/keyctl negate %k 30 %S
diff --git a/package/keyutils/keyutils-04-Makefile-for-buildroot.patch b/package/keyutils/keyutils-04-Makefile-for-buildroot.patch
new file mode 100644
index 0000000..e10abd5
--- /dev/null
+++ b/package/keyutils/keyutils-04-Makefile-for-buildroot.patch
@@ -0,0 +1,65 @@
+diff -durN keyutils-1.5.5.orig/Makefile keyutils-1.5.5/Makefile
+--- keyutils-1.5.5.orig/Makefile	2011-11-30 16:27:43.000000000 +0100
++++ keyutils-1.5.5/Makefile	2012-08-14 17:06:07.064412101 +0200
+@@ -1,7 +1,5 @@
+-CPPFLAGS	:= -I.
+-CFLAGS		:= -g -Wall -Werror
+-INSTALL		:= install
+-DESTDIR		:=
++CPPFLAGS	+= -I.
++CFLAGS		+= -g -Wall -Werror
+ SPECFILE	:= keyutils.spec
+ NO_GLIBC_KEYERR	:= 0
+ NO_ARLIB	:= 0
+@@ -14,7 +12,7 @@
+ MAN5		:= /usr/share/man/man5
+ MAN8		:= /usr/share/man/man8
+ INCLUDEDIR	:= /usr/include
+-LNS		:= ln -sf
++LNS		:= $(LN) -sf
+ 
+ ###############################################################################
+ #
+@@ -48,29 +46,6 @@
+ 
+ ###############################################################################
+ #
+-# Guess at the appropriate lib directory and word size
+-#
+-###############################################################################
+-LIBDIR		:= $(shell ldd /usr/bin/make | grep '\(/libc\)' | sed -e 's!.*\(/.*\)/libc[.].*!\1!')
+-USRLIBDIR	:= $(patsubst /lib/%,/usr/lib/%,$(LIBDIR))
+-BUILDFOR	:= $(shell file /usr/bin/make | sed -e 's!.*ELF \(32\|64\)-bit.*!\1!')-bit
+-
+-LNS		:= ln -sf
+-
+-ifeq ($(BUILDFOR),32-bit)
+-CFLAGS		+= -m32
+-LIBDIR		:= /lib
+-USRLIBDIR	:= /usr/lib
+-else
+-ifeq ($(BUILDFOR),64-bit)
+-CFLAGS		+= -m64
+-LIBDIR		:= /lib64
+-USRLIBDIR	:= /usr/lib64
+-endif
+-endif
+-
+-###############################################################################
+-#
+ # This is necessary if glibc doesn't know about the key management error codes
+ #
+ ###############################################################################
+@@ -110,10 +85,10 @@
+ 
+ 
+ $(DEVELLIB): $(SONAME)
+-	ln -sf $< $@
++	$(LNS) $< $@
+ 
+ $(SONAME): $(LIBNAME)
+-	ln -sf $< $@
++	$(LNS) $< $@
+ 
+ LIBVERS := -shared -Wl,-soname,$(SONAME) -Wl,--version-script,version.lds
+ 
diff --git a/package/keyutils/keyutils-05-fix-install-rule.patch b/package/keyutils/keyutils-05-fix-install-rule.patch
new file mode 100644
index 0000000..74e5670
--- /dev/null
+++ b/package/keyutils/keyutils-05-fix-install-rule.patch
@@ -0,0 +1,19 @@
+Makefile: fix install rule
+
+Do not link the .so with an absolute path, otherwise it may point to
+the host library.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+diff -durN keyutils-1.5.5.orig/Makefile keyutils-1.5.5/Makefile
+--- keyutils-1.5.5.orig/Makefile	2012-10-22 20:11:57.188548033 +0200
++++ keyutils-1.5.5/Makefile	2012-10-22 20:14:40.868236838 +0200
+@@ -127,7 +127,7 @@
+ 	$(INSTALL) -D $(LIBNAME) $(DESTDIR)$(LIBDIR)/$(LIBNAME)
+ 	$(LNS) $(LIBNAME) $(DESTDIR)$(LIBDIR)/$(SONAME)
+ 	mkdir -p $(DESTDIR)$(USRLIBDIR)
+-	$(LNS) $(LIBDIR)/$(SONAME) $(DESTDIR)$(USRLIBDIR)/$(DEVELLIB)
++	$(LNS) $(SONAME) $(DESTDIR)$(USRLIBDIR)/$(DEVELLIB)
+ 	$(INSTALL) -D keyctl $(DESTDIR)$(BINDIR)/keyctl
+ 	$(INSTALL) -D request-key $(DESTDIR)$(SBINDIR)/request-key
+ 	$(INSTALL) -D request-key-debug.sh $(DESTDIR)$(SHAREDIR)/request-key-debug.sh
diff --git a/package/keyutils/keyutils.mk b/package/keyutils/keyutils.mk
new file mode 100644
index 0000000..184b58d
--- /dev/null
+++ b/package/keyutils/keyutils.mk
@@ -0,0 +1,32 @@
+#############################################################
+#
+# keyutils
+#
+##############################################################
+
+KEYUTILS_VERSION         = 1.5.5
+KEYUTILS_SOURCE          = keyutils-$(KEYUTILS_VERSION).tar.bz2
+KEYUTILS_SITE            = http://people.redhat.com/~dhowells/keyutils
+KEYUTILS_LICENSE         = GPLv2+ LGPLv2.1+
+KEYUTILS_LICENSE_FILES   = LICENCE.GPL LICENCE.LGPL
+KEYUTILS_INSTALL_STAGING = YES
+
+KEYUTILS_MAKE_ENV =     \
+    INSTALL=$(INSTALL)  \
+    LIBDIR=/usr/lib     \
+    USRLIBDIR=/usr/lib  \
+    LN=$(HOSTLN)        \
+
+define KEYUTILS_BUILD_CMDS
+	$(KEYUTILS_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D)
+endef
+
+define KEYUTILS_INSTALL_STAGING_CMDS
+	$(KEYUTILS_MAKE_ENV) $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
+endef
+
+define KEYUTILS_INSTALL_TARGET_CMDS
+	$(KEYUTILS_MAKE_ENV) $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(generic-package))
-- 
1.7.2.5

[Buildroot] [PATCH 15/20] package/pmake: add host pmake

[Yann E. MORIN]

pmake is the make command used by the BSD.
It will used to build BSD-related packages, coming later.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
 package/pmake/pmake-100_mk.patch         | 2624 ++++++++++++++++++++++++++++++
 package/pmake/pmake-110_mkdep.patch      |  230 +++
 package/pmake/pmake-120_fixes.patch      |  266 +++
 package/pmake/pmake-130_maxpathlen.patch |   39 +
 package/pmake/pmake-140_multiarch.patch  |  354 ++++
 package/pmake/pmake-150_mktemp.patch     |   31 +
 package/pmake/pmake.mk                   |   46 +
 7 files changed, 3590 insertions(+), 0 deletions(-)
 create mode 100644 package/pmake/pmake-100_mk.patch
 create mode 100644 package/pmake/pmake-110_mkdep.patch
 create mode 100644 package/pmake/pmake-120_fixes.patch
 create mode 100644 package/pmake/pmake-130_maxpathlen.patch
 create mode 100644 package/pmake/pmake-140_multiarch.patch
 create mode 100644 package/pmake/pmake-150_mktemp.patch
 create mode 100644 package/pmake/pmake.mk

diff --git a/package/pmake/pmake-100_mk.patch b/package/pmake/pmake-100_mk.patch
new file mode 100644
index 0000000..1786690
--- /dev/null
+++ b/package/pmake/pmake-100_mk.patch
@@ -0,0 +1,2624 @@
+Patch vampirised from Debian's package pmake_1.111-3.2:
+    http://snapshot.debian.org/archive/debian/20120601T033558Z/pool/main/p/pmake/
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+--- pmake-1.111.orig/mk/Makefile
++++ pmake-1.111/mk/Makefile
+@@ -0,0 +1,16 @@
++#	$NetBSD: Makefile,v 1.24 1999/02/13 02:54:36 lukem Exp $
++#	@(#)Makefile	8.1 (Berkeley) 6/8/93
++
++.include <bsd.own.mk>
++
++.if ${MKSHARE} != "no"
++FILES=	bsd.README bsd.doc.mk bsd.dep.mk bsd.files.mk bsd.inc.mk bsd.info.mk \
++	bsd.kinc.mk bsd.kmod.mk bsd.lib.mk bsd.links.mk bsd.man.mk bsd.nls.mk \
++	bsd.obj.mk bsd.own.mk bsd.prog.mk bsd.subdir.mk bsd.sys.mk sys.mk
++FILESDIR=/usr/share/mk
++.endif
++MKOBJ=	no
++
++FILESMODE=444
++
++.include <bsd.prog.mk>
+--- pmake-1.111.orig/mk/bsd.README
++++ pmake-1.111/mk/bsd.README
+@@ -0,0 +1,536 @@
++#	$NetBSD: bsd.README,v 1.48 1999/02/13 03:04:09 lukem Exp $
++#	@(#)bsd.README	8.2 (Berkeley) 4/2/94
++
++This is the README file for the new make "include" files for the BSD
++source tree.  The files are installed in /usr/share/mk, and are, by
++convention, named with the suffix ".mk".
++
++Note, this file is not intended to replace reading through the .mk
++files for anything tricky.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++RANDOM THINGS WORTH KNOWING:
++
++The files are simply C-style #include files, and pretty much behave like
++you'd expect.  The syntax is slightly different in that a single '.' is
++used instead of the hash mark, i.e. ".include <bsd.prog.mk>".
++
++One difference that will save you lots of debugging time is that inclusion
++of the file is normally done at the *end* of the Makefile.  The reason for
++this is because .mk files often modify variables and behavior based on the
++values of variables set in the Makefile.  To make this work, remember that
++the FIRST target found is the target that is used, i.e. if the Makefile has:
++
++	a:
++		echo a
++	a:
++		echo a number two
++
++the command "make a" will echo "a".  To make things confusing, the SECOND
++variable assignment is the overriding one, i.e. if the Makefile has:
++
++	a=	foo
++	a=	bar
++
++	b:
++		echo ${a}
++
++the command "make b" will echo "bar".  This is for compatibility with the
++way the V7 make behaved.
++
++It's fairly difficult to make the BSD .mk files work when you're building
++multiple programs in a single directory.  It's a lot easier split up the
++programs than to deal with the problem.  Most of the agony comes from making
++the "obj" directory stuff work right, not because we switched to a new version
++of make.  So, don't get mad at us, figure out a better way to handle multiple
++architectures so we can quit using the symbolic link stuff.  (Imake doesn't
++count.)
++
++The file .depend in the source directory is expected to contain dependencies
++for the source files.  This file is read automatically by make after reading
++the Makefile.
++
++The variable DESTDIR works as before.  It's not set anywhere but will change
++the tree where the file gets installed.
++
++The profiled libraries are no longer built in a different directory than
++the regular libraries.  A new suffix, ".po", is used to denote a profiled
++object, and ".so" denotes a shared (position-independent) object.
++
++The following variables that control how things are made/installed that
++are not set by default. These should not be set by Makefiles; they're for
++the user to define in MAKECONF (see bsd.own.mk, below) or on the make(1)
++command line:
++
++BUILD 		If defined, 'make install' checks that the targets in the
++		source directories are up-to-date and remakes them if they
++                are out of date, instead of blindly trying to install
++                out of date or non-existant targets.
++
++UPDATE 		If defined, 'make install' only installs targets that are
++		more recently modified in the source directories that their
++		installed counterparts.
++
++MKCATPAGES	If "no", don't build or install the catman pages.
++
++MKDOC		If "no", don't build or install the documentation.
++
++MKINFO		If "no", don't build or install Info documentation from
++		Texinfo source files.
++
++MKLINT		If "no", don't build or install the lint libraries.
++
++MKMAN		If "no", don't build or install the man or catman pages.
++		Also acts as "MKCATPAGES=no"
++
++MKNLS		If "no", don't build or install the NLS files.
++
++MKOBJ		If "no", don't create objdirs.
++
++MKPIC		If "no", don't build or install shared libraries.
++
++MKPICINSTALL	If "no", don't install the *_pic.a libraries.
++
++MKPROFILE	If "no", don't build or install the profiling libraries.
++
++MKSHARE		If "no", act as "MKCATPAGES=no MKDOC=no MKINFO=no MKMAN=no
++		MKNLS=no".  I.e, don't build catman pages, documentation,
++		Info documentation, man pages, NLS files, ...
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <sys.mk> has the default rules for all makes, in the BSD
++environment or otherwise.  You probably don't want to touch this file.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.man.mk> handles installing manual pages and their
++links.
++
++It has a two targets:
++
++	maninstall:
++		Install the manual page sources and their links.
++	catinstall:
++		Install the preformatted manual pages and their links.
++
++It sets/uses the following variables:
++
++MANDIR		Base path for manual installation.
++
++MANGRP		Manual group.
++
++MANOWN		Manual owner.
++
++MANMODE		Manual mode.
++
++MANSUBDIR	Subdirectory under the manual page section, i.e. "/vax"
++		or "/tahoe" for machine specific manual pages.
++
++MAN		The manual pages to be installed (use a .1 - .9 suffix).
++
++MLINKS		List of manual page links (using a .1 - .9 suffix).  The
++		linked-to file must come first, the linked file second,
++		and there may be multiple pairs.  The files are soft-linked.
++
++The include file <bsd.man.mk> includes a file named "../Makefile.inc" if
++it exists.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.own.mk> contains source tree configuration parameters,
++such as the owners, groups, etc. for both manual pages and binaries, and
++a few global "feature configuration" parameters.
++
++It has no targets.
++
++To get system-specific configuration parameters, bsd.own.mk will try to
++include the file specified by the "MAKECONF" variable.  If MAKECONF is not
++set, or no such file exists, the system make configuration file, /etc/mk.conf
++is included.  These files may define any of the variables described below.
++
++bsd.own.mk sets the following variables, if they are not already defined
++(defaults are in brackets):
++
++BSDSRCDIR	The real path to the system sources, so that 'make obj'
++		will work correctly. [/usr/src]
++
++BSDOBJDIR	The real path to the system 'obj' tree, so that 'make obj'
++		will work correctly. [/usr/obj]
++
++BINGRP		Binary group. [wheel]
++
++BINOWN		Binary owner. [root]
++
++BINMODE		Binary mode. [555]
++
++NONBINMODE	Mode for non-executable files. [444]
++
++MANDIR		Base path for manual installation. [/usr/share/man/cat]
++
++MANGRP		Manual group. [wheel]
++
++MANOWN		Manual owner. [root]
++
++MANMODE		Manual mode. [${NONBINMODE}]
++
++MANINSTALL	Manual installation type: maninstall, catinstall, or both
++
++LIBDIR		Base path for library installation. [/usr/lib]
++
++LINTLIBDIR	Base path for lint(1) library installation. [/usr/libdata/lint]
++
++LIBGRP		Library group. [${BINGRP}]
++
++LIBOWN		Library owner. [${BINOWN}]
++
++LIBMODE		Library mode. [${NONBINMODE}]
++
++DOCDIR		Base path for system documentation (e.g. PSD, USD, etc.)
++	        installation. [/usr/share/doc]
++
++DOCGRP		Documentation group. [wheel]
++
++DOCOWN		Documentation owner. [root]
++
++DOCMODE		Documentation mode. [${NONBINMODE}]
++
++NLSDIR		Base path for National Language Support files installation.
++		[/usr/share/nls]
++
++NLSGRP		National Language Support files group. [wheel]
++
++NLSOWN		National Language Support files owner. [root]
++
++NLSMODE		National Language Support files mode. [${NONBINMODE}]
++
++STRIPFLAG	The flag passed to the install program to cause the binary
++		to be stripped.  This is to be used when building your
++		own install script so that the entire system can be made
++		stripped/not-stripped using a single knob. [-s]
++
++COPY		The flag passed to the install program to cause the binary
++		to be copied rather than moved.  This is to be used when
++		building our own install script so that the entire system
++		can either be installed with copies, or with moves using
++		a single knob. [-c]
++
++Additionally, the following variables may be set by bsd.own.mk or in a
++make configuration file to modify the behaviour of the system build
++process (default values are in brackets along with comments, if set by
++bsd.own.mk):
++
++EXPORTABLE_SYSTEM
++		Do not build /usr/src/domestic, even if it is present.
++
++SKEY		Compile in support for S/key authentication. [yes, set
++		unconditionally]
++
++KERBEROS	Compile in support for Kerberos 4 authentication.
++
++KERBEROS5	Compile in support for Kerberos 5 authentication.
++
++MANZ		Compress manual pages at installation time.
++
++SYS_INCLUDE	Copy or symlink kernel include files into /usr/include.
++		Possible values are "symlinks" or "copies" (which is
++		the same as the variable being unset).
++
++NOPROFILE	Do not build profiled versions of system libraries
++
++NOPIC		Do not build PIC versions of system libraries, and
++		do not build shared libraries.
++
++NOLINT		Do not build lint libraries.
++
++OBJECT_FMT	Object file format. [set to "ELF" on  ports that use
++		ELF -- currently if ${MACHINE_ARCH} is "alpha", "mips"
++		or "powerpc" or  set to "a.out" on other ports].
++
++
++bsd.own.mk is generally useful when building your own Makefiles so that
++they use the same default owners etc. as the rest of the tree.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.prog.mk> handles building programs from one or
++more source files, along with their manual pages.  It has a limited number
++of suffixes, consistent with the current needs of the BSD tree.
++
++It has eight targets:
++
++	all:
++		build the program and its manual page
++	clean:
++		remove the program, any object files and the files a.out,
++		Errs, errs, mklog, and ${PROG}.core.
++	cleandir:
++		remove all of the files removed by the target clean, as
++		well as .depend, tags, and any manual pages.
++		`distclean' is a synonym for `cleandir'.
++	depend:
++		make the dependencies for the source files, and store
++		them in the file .depend.
++	includes:
++		install any header files.
++	install:
++		install the program and its manual pages; if the Makefile
++		does not itself define the target install, the targets
++		beforeinstall and afterinstall may also be used to cause
++		actions immediately before and after the install target
++		is executed.
++	lint:
++		run lint on the source files
++	tags:
++		create a tags file for the source files.
++
++It sets/uses the following variables:
++
++BINGRP		Binary group.
++
++BINOWN		Binary owner.
++
++BINMODE		Binary mode.
++
++CLEANFILES	Additional files to remove for the clean and cleandir targets.
++
++COPTS		Additional flags to the compiler when creating C objects.
++
++CPPFLAGS	Additional flags to the C pre-processor
++
++LDADD		Additional loader objects.  Usually used for libraries.
++		For example, to load with the compatibility and utility
++		libraries, use:
++
++			LDADD+=-lutil -lcompat
++
++LDFLAGS		Additional loader flags.
++
++LINKS		The list of binary links; should be full pathnames, the
++		linked-to file coming first, followed by the linked
++		file.  The files are hard-linked.  For example, to link
++		/bin/test and /bin/[, use:
++
++			LINKS=	${DESTDIR}/bin/test ${DESTDIR}/bin/[
++
++SYMLINKS	The list of symbolic links; should be full pathnames.
++                Syntax is identical to LINKS. Note that DESTDIR is not
++		automatically included in the link.
++
++MAN		Manual pages (should end in .1 - .9).  If no MAN variable is
++		defined, "MAN=${PROG}.1" is assumed.
++
++PROG		The name of the program to build.  If not supplied, nothing
++		is built.
++
++PROGNAME	The name that the above program will be installed as, if
++		different from ${PROG}.
++
++SRCS		List of source files to build the program.  If SRCS is not
++		defined, it's assumed to be ${PROG}.c.
++
++DPADD		Additional dependencies for the program.  Usually used for
++		libraries.  For example, to depend on the compatibility and
++		utility libraries use:
++
++			DPADD+=${LIBCOMPAT} ${LIBUTIL}
++
++		The following libraries are predefined for DPADD:
++
++		LIBC?=		${DESTDIR}/usr/lib/libc.a
++		LIBC_PIC?=	${DESTDIR}/usr/lib/libc_pic.a
++		LIBCOMPAT?=	${DESTDIR}/usr/lib/libcompat.a
++		LIBCRYPT?=	${DESTDIR}/usr/lib/libcrypt.a
++		LIBCURSES?=	${DESTDIR}/usr/lib/libcurses.a
++		LIBDBM?=	${DESTDIR}/usr/lib/libdbm.a
++		LIBDES?=	${DESTDIR}/usr/lib/libdes.a
++		LIBEDIT?=	${DESTDIR}/usr/lib/libedit.a
++		LIBGCC?=	${DESTDIR}/usr/lib/libgcc.a
++		LIBGNUMALLOC?=	${DESTDIR}/usr/lib/libgnumalloc.a
++		LIBKDB?=	${DESTDIR}/usr/lib/libkdb.a
++		LIBKRB?=	${DESTDIR}/usr/lib/libkrb.a
++		LIBKVM?=	${DESTDIR}/usr/lib/libkvm.a
++		LIBL?=		${DESTDIR}/usr/lib/libl.a
++		LIBM?=		${DESTDIR}/usr/lib/libm.a
++		LIBMP?=		${DESTDIR}/usr/lib/libmp.a
++		LIBNTP?=	${DESTDIR}/usr/lib/libntp.a
++		LIBPC?=		${DESTDIR}/usr/lib/libpc.a
++		LIBPCAP?=	${DESTDIR}/usr/lib/libpcap.a
++		LIBPLOT?=	${DESTDIR}/usr/lib/libplot.a
++		LIBPOSIX?=	${DESTDIR}/usr/lib/libposix.a
++		LIBRESOLV?=	${DESTDIR}/usr/lib/libresolv.a
++		LIBRPCSVC?=	${DESTDIR}/usr/lib/librpcsvc.a
++		LIBSKEY?=	${DESTDIR}/usr/lib/libskey.a
++		LIBTERMCAP?=	${DESTDIR}/usr/lib/libtermcap.a
++		LIBTELNET?=	${DESTDIR}/usr/lib/libtelnet.a
++		LIBUTIL?=	${DESTDIR}/usr/lib/libutil.a
++		LIBWRAP?=	${DESTDIR}/usr/lib/libwrap.a
++		LIBY?=		${DESTDIR}/usr/lib/liby.a
++		LIBZ?=		${DESTDIR}/usr/lib/libz.a
++
++
++SHAREDSTRINGS	If defined, a new .c.o rule is used that results in shared
++		strings, using xstr(1). Note that this will not work with
++		parallel makes.
++
++STRIP		The flag passed to the install program to cause the binary
++		to be stripped.
++
++SUBDIR		A list of subdirectories that should be built as well.
++		Each of the targets will execute the same target in the
++		subdirectories.
++
++SCRIPTS		A list of interpreter scripts [file.{sh,csh,pl,awk,...}].
++		These are installed exactly like programs.
++
++SCRIPTSNAME	The name that the above program will be installed as, if
++		different from ${SCRIPTS}. These can be further specialized
++		by setting SCRIPTSNAME_<script>.
++
++FILES		A list of files to install. The installation is controlled
++		by the FILESNAME, FILESOWN, FILESGRP, FILESMODE, FILESDIR
++		variables that can be further specialized by FILES<VAR>_<file>
++
++The include file <bsd.prog.mk> includes the file named "../Makefile.inc"
++if it exists, as well as the include file <bsd.man.mk>.
++
++Some simple examples:
++
++To build foo from foo.c with a manual page foo.1, use:
++
++	PROG=	foo
++
++	.include <bsd.prog.mk>
++
++To build foo from foo.c with a manual page foo.2, add the line:
++
++	MAN=	foo.2
++
++If foo does not have a manual page at all, add the line:
++
++	NOMAN=	noman
++
++If foo has multiple source files, add the line:
++
++	SRCS=	a.c b.c c.c d.c
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.subdir.mk> contains the default targets for building
++subdirectories.  It has the same eight targets as <bsd.prog.mk>: all, 
++clean, cleandir, depend, includes, install, lint, and tags.  For all of
++the directories listed in the variable SUBDIRS, the specified directory 
++will be visited and the target made.  There is also a default target which
++allows the command "make subdir" where subdir is any directory listed in
++the variable SUBDIRS.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.links.mk> handles the LINKS and SYMLINKS variables
++and is included from from bsd.lib.mk and bsd.prog.mk.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.files.mk> handles the FILES variables and is included
++from bsd.lib.mk and bsd.prog.mk.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.inc.mk> defines the includes target and uses two
++variables:
++
++INCS	The list of include files
++
++INCSDIR	The location to install the include files.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.kinc.mk> defines the many targets (includes,
++subdirectories, etc.), and is used by kernel makefiles to handle
++include file installation.  It is intended to be included alone, by
++kernel Makefiles.  Please see bsd.kinc.mk for more details, and keep
++the documentation in that file up to date.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.info.mk> is used to generate and install GNU Info
++documentation from respective Texinfo source files.  It defines three
++implicit targets (.txi.info, .texi.info, and .texinfo.info), and uses the
++following variables:
++
++TEXINFO		List of Texinfo source files.  Info documentation will
++		consist of single files with the extension replaced by
++		.info.
++
++INFOFLAGS	Flags to pass to makeinfo.  []
++
++INSTALL_INFO	Name of install-info program.  [install-info]
++
++MAKEINFO	Name of makeinfo program.  [makeinfo]
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.sys.mk> is used by <bsd.prog.mk> and
++<bsd.lib.mk>.  It contains overrides that are used when building
++the NetBSD source tree.  For instance, if "PARALLEL" is defined by
++the program/library Makefile, it includes a set of rules for lex and
++yacc that allow multiple lex and yacc targets to be built in parallel.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.lib.mk> has support for building libraries.  It has
++the same eight targets as <bsd.prog.mk>: all, clean, cleandir, depend,
++includes, install, lint, and tags.  Additionally, it has a checkver target
++which checks for installed shared object libraries whose version is greater
++that the version of the source. It has a limited number of suffixes,
++consistent with the current needs of the BSD tree.
++
++It sets/uses the following variables:
++
++LIB		The name of the library to build.
++
++LIBDIR		Target directory for libraries.
++
++LINTLIBDIR	Target directory for lint libraries.
++
++LIBGRP		Library group.
++
++LIBOWN		Library owner.
++
++LIBMODE		Library mode.
++
++LDADD		Additional loader objects.
++
++MAN		The manual pages to be installed (use a .1 - .9 suffix).
++
++MKLINKLIB	If "no", act as "MKPICINSTALL=no MKPROFILE=no".
++		Also:
++			- don't install the .a libraries
++			- don't install _pic.a libraries on PIC systems
++			- don't build .a libraries on PIC systems
++			- don't install the .so symlink on ELF systems
++		I.e, only install the shared library (and the .so.major
++		symlink on ELF).
++
++NOCHECKVER_<library>
++NOCHECKVER	If set, disables checking for installed shared object
++		libraries with versions greater than the source.  A
++		particular library name, without the "lib" prefix, may
++		be appended to the variable name to disable the check for
++		only that library.
++
++SRCS		List of source files to build the library.  Suffix types
++		.s, .c, and .f are supported.  Note, .s files are preferred
++		to .c files of the same name.  (This is not the default for
++		versions of make.)
++
++The include file <bsd.lib.mk> includes the file named "../Makefile.inc"
++if it exists, as well as the include file <bsd.man.mk>.
++
++It has rules for building profiled objects; profiled libraries are
++built by default.
++
++Libraries are ranlib'd when made.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+--- pmake-1.111.orig/mk/bsd.dep.mk
++++ pmake-1.111/mk/bsd.dep.mk
+@@ -0,0 +1,62 @@
++#	$NetBSD: bsd.dep.mk,v 1.26 1999/02/24 22:04:15 simonb Exp $
++
++.PHONY:		cleandepend
++cleandir distclean: cleandepend
++
++MKDEP?=		mkdep
++
++# some of the rules involve .h sources, so remove them from mkdep line
++depend: beforedepend
++.if defined(SRCS)
++depend: .depend
++	@true # hack to prevent "make depend" from using implicit rules
++.NOPATH: .depend
++.depend: ${SRCS} ${DPSRCS}
++	@rm -f .depend
++	@files="${.ALLSRC:M*.s} ${.ALLSRC:M*.S}"; \
++	if [ "$$files" != " " ]; then \
++	  echo ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${AFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} ${AINC:Q} $$files; \
++	  ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${AFLAGS:M-[ID]*} ${CPPFLAGS} ${AINC} $$files; \
++	fi
++	@files="${.ALLSRC:M*.c}"; \
++	if [ "$$files" != "" ]; then \
++	  echo ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${CFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} $$files; \
++	  ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${CFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \
++	fi
++	@files="${.ALLSRC:M*.m}"; \
++	if [ "$$files" != "" ]; then \
++	  echo ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${OBJCFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} $$files; \
++	  ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${OBJCFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \
++	fi
++	@files="${.ALLSRC:M*.cc} ${.ALLSRC:M*.C} ${.ALLSRC:M*.cxx}"; \
++	if [ "$$files" != "  " ]; then \
++	  echo ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${CXXFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} $$files; \
++	  ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${CXXFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \
++	fi
++cleandepend:
++	rm -f .depend ${.CURDIR}/tags
++.else
++cleandepend:
++.endif
++depend: afterdepend
++
++beforedepend:
++afterdepend:
++
++.if !target(tags)
++.if defined(SRCS)
++tags: ${SRCS}
++	-cd ${.CURDIR}; ctags -f /dev/stdout ${.ALLSRC:N*.h} | \
++	    sed "s;\${.CURDIR}/;;" > tags
++.else
++tags:
++.endif
++.endif
+--- pmake-1.111.orig/mk/bsd.doc.mk
++++ pmake-1.111/mk/bsd.doc.mk
+@@ -0,0 +1,78 @@
++#	$NetBSD: bsd.doc.mk,v 1.41 1999/02/12 01:10:06 lukem Exp $
++#	@(#)bsd.doc.mk	8.1 (Berkeley) 8/14/93
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		cleandoc docinstall print spell
++.if ${MKSHARE} != "no"
++realinstall:	docinstall
++.endif
++clean cleandir distclean: cleandoc
++
++BIB?=		bib
++EQN?=		eqn
++GREMLIN?=	grn
++GRIND?=		vgrind -f
++INDXBIB?=	indxbib
++PIC?=		pic
++REFER?=		refer
++ROFF?=         groff ${MACROS} ${PAGES}
++SOELIM?=	soelim
++TBL?=		tbl
++
++.if !target(all)
++.if ${MKSHARE} != "no"
++all: paper.ps
++.else
++all:
++.endif
++.endif
++
++.if !target(paper.ps)
++paper.ps: ${SRCS}
++	${ROFF} ${.ALLSRC} > ${.TARGET}
++.endif
++
++.if !target(print)
++print: paper.ps
++	lpr -P${PRINTER} ${.ALLSRC}
++.endif
++
++cleandoc:
++	rm -f paper.* [eE]rrs mklog ${CLEANFILES}
++
++.if ${MKDOC} != "no"
++FILES?=	${SRCS}
++.for F in ${FILES} ${EXTRA} Makefile
++docinstall:: ${DESTDIR}${DOCDIR}/${DIR}/${F}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${DOCDIR}/${DIR}/${F}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${DOCDIR}/${DIR}/${F}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${DOCDIR}/${DIR}/${F}
++${DESTDIR}${DOCDIR}/${DIR}/${F}: ${F}
++	${INSTALL} ${RENAME} ${PRESERVE} -c -o ${DOCOWN} -g ${DOCGRP} \
++		-m ${DOCMODE} ${.ALLSRC} ${.TARGET}
++.endfor
++.endif
++
++.if !target(docinstall)
++docinstall::
++.endif
++
++spell: ${SRCS}
++	spell ${.ALLSRC} | sort | comm -23 - spell.ok > paper.spell
++
++depend includes lint obj tags:
++
++.include <bsd.obj.mk>
+--- pmake-1.111.orig/mk/bsd.files.mk
++++ pmake-1.111/mk/bsd.files.mk
+@@ -0,0 +1,43 @@
++#	$NetBSD: bsd.files.mk,v 1.8 1999/02/11 13:25:42 tv Exp $
++
++# This file can be included multiple times.  It clears the definition of
++# FILES at the end so that this is possible.
++
++.PHONY:		filesinstall
++realinstall:	filesinstall
++
++.if defined(FILES) && !empty(FILES)
++FILESDIR?=${BINDIR}
++FILESOWN?=${BINOWN}
++FILESGRP?=${BINGRP}
++FILESMODE?=${NONBINMODE}
++.for F in ${FILES}
++FILESDIR_${F}?=${FILESDIR}
++FILESOWN_${F}?=${FILESOWN}
++FILESGRP_${F}?=${FILESGRP}
++FILESMODE_${F}?=${FILESMODE}
++.if defined(FILESNAME)
++FILESNAME_${F} ?= ${FILESNAME}
++.else
++FILESNAME_${F} ?= ${F:T}
++.endif
++filesinstall:: ${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}
++${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}: ${F}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${FILESOWN_${F}} \
++		-g ${FILESGRP_${F}} -m ${FILESMODE_${F}} ${.ALLSRC} ${.TARGET}
++.endfor
++.endif
++
++.if !target(filesinstall)
++filesinstall::
++.endif
++
++FILES:=
+--- pmake-1.111.orig/mk/bsd.inc.mk
++++ pmake-1.111/mk/bsd.inc.mk
+@@ -0,0 +1,25 @@
++#	$NetBSD: bsd.inc.mk,v 1.12 1999/02/04 11:58:30 christos Exp $
++
++.PHONY:		incinstall
++includes:	${INCS} incinstall
++
++.if defined(INCS)
++.for I in ${INCS}
++incinstall:: ${DESTDIR}${INCSDIR}/$I
++
++.PRECIOUS: ${DESTDIR}${INCSDIR}/$I
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${INCSDIR}/$I
++.endif
++${DESTDIR}${INCSDIR}/$I: $I
++	@cmp -s ${.ALLSRC} ${.TARGET} > /dev/null 2>&1 || \
++	    (echo "${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} \
++		-g ${BINGRP} -m ${NONBINMODE} ${.ALLSRC} ${.TARGET}" && \
++	     ${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} -g ${BINGRP} \
++		-m ${NONBINMODE} ${.ALLSRC} ${.TARGET})
++.endfor
++.endif
++
++.if !target(incinstall)
++incinstall::
++.endif
+--- pmake-1.111.orig/mk/bsd.info.mk
++++ pmake-1.111/mk/bsd.info.mk
+@@ -0,0 +1,60 @@
++#	$NetBSD: bsd.info.mk,v 1.7.2.1 1999/04/22 14:46:13 perry Exp $
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++MAKEINFO?=	makeinfo
++INFOFLAGS?=	
++INSTALL_INFO?=	install-info
++
++.SUFFIXES: .txi .texi .texinfo .info
++
++.txi.info .texi.info .texinfo.info:
++	@${MAKEINFO} ${INFOFLAGS} --no-split -o $@ $<
++
++.if defined(TEXINFO) && !empty(TEXINFO) && ${MKINFO} != "no"
++INFOFILES=	${TEXINFO:C/\.te?xi(nfo)?$/.info/}
++FILES+=		${INFOFILES}
++
++infoinstall:
++.for F in ${INFOFILES}
++	@${INSTALL_INFO} --remove --info-dir=${DESTDIR}${INFODIR} ${DESTDIR}${INFODIR}/${F}
++	${INSTALL_INFO} --info-dir=${DESTDIR}${INFODIR} ${DESTDIR}${INFODIR}/${F}
++.endfor
++
++.for F in ${INFOFILES}
++FILESDIR_${F}=	${INFODIR}
++FILESOWN_${F}=	${INFOOWN}
++FILESGRP_${F}=	${INFOGRP}
++FILESMODE_${F}=	${INFOMODE}
++FILESNAME_${F}=	${F:T}
++.endfor
++
++all: ${INFOFILES}
++.else
++all:
++.endif
++
++.if ${MKINFO} != "no"
++cleaninfo:
++	rm -f ${INFOFILES}
++.else
++cleaninfo infoinstall:
++.endif
++
++.include <bsd.files.mk>
++
++# These need to happen *after* filesinstall.
++.PHONY: infoinstall cleaninfo
++realinstall: infoinstall
++cleandir distclean: cleaninfo
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++clean depend includes lint regress tags:
+--- pmake-1.111.orig/mk/bsd.kinc.mk
++++ pmake-1.111/mk/bsd.kinc.mk
+@@ -0,0 +1,136 @@
++#	$NetBSD: bsd.kinc.mk,v 1.5 1999/02/04 11:58:30 christos Exp $
++
++# System configuration variables:
++#
++# SYS_INCLUDE	"symlinks": symlinks to include directories are created.
++#		This may not work 100% properly for all headers.
++#
++#		"copies": directories are made, if necessary, and headers
++#		are installed into them.
++#
++# Variables:
++#
++# INCSDIR	Directory to install includes into (and/or make, and/or
++#		symlink, depending on what's going on).
++#
++# KDIR		Kernel directory to symlink to, if SYS_INCLUDE is symlinks.
++#		If unspecified, no action will be taken when making include
++#		for the directory if SYS_INCLUDE is symlinks.
++#
++# INCS		Headers to install, if SYS_INCLUDE is copies.
++#
++# DEPINCS	Headers to install which are built dynamically.
++#
++# SUBDIR	Subdirectories to enter
++#
++# SYMLINKS	Symlinks to make (unconditionally), a la bsd.links.mk.
++#		Note that the original bits will be 'rm -rf'd rather than
++#		just 'rm -f'd, to make the right thing happen with include
++#		directories.
++#
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.MAIN:		all
++.endif
++
++# Change SYS_INCLUDE in bsd.own.mk or /etc/mk.conf to "symlinks" if you
++# don't want copies
++SYS_INCLUDE?=   copies
++
++# If DESTDIR is set, we're probably building a release, so force "copies".
++.if defined(DESTDIR) && (${DESTDIR} != "/" && !empty(DESTDIR))
++SYS_INCLUDE=    copies
++.endif
++
++
++.PHONY:		incinstall
++includes:	${INCS} incinstall
++
++
++.if ${SYS_INCLUDE} == "symlinks"
++
++# don't install includes, just make symlinks.
++
++.if defined(KDIR)
++SYMLINKS+=	${KDIR} ${INCSDIR}
++.endif
++
++.else # not symlinks
++
++# make sure the directory is OK, and install includes.
++
++.PRECIOUS: ${DESTDIR}${INCSDIR}
++.PHONY: ${DESTDIR}${INCSDIR}
++${DESTDIR}${INCSDIR}:
++	@if [ ! -d ${.TARGET} ] || [ -L ${.TARGET} ] ; then \
++		echo creating ${.TARGET}; \
++		/bin/rm -rf ${.TARGET}; \
++		${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m 755 ${.TARGET}; \
++	fi
++
++incinstall:: ${DESTDIR}${INCSDIR}
++
++.if defined(INCS)
++.for I in ${INCS}
++incinstall:: ${DESTDIR}${INCSDIR}/$I
++
++.PRECIOUS: ${DESTDIR}${INCSDIR}/$I
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${INCSDIR}/$I
++.endif
++${DESTDIR}${INCSDIR}/$I: ${DESTDIR}${INCSDIR} $I 
++	@cmp -s ${.CURDIR}/$I ${.TARGET} > /dev/null 2>&1 || \
++	    (echo "${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} \
++		-g ${BINGRP} -m ${NONBINMODE} ${.CURDIR}/$I ${.TARGET}" && \
++	     ${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} -g ${BINGRP} \
++		-m ${NONBINMODE} ${.CURDIR}/$I ${.TARGET})
++.endfor
++.endif
++
++.if defined(DEPINCS)
++.for I in ${DEPINCS}
++incinstall:: ${DESTDIR}${INCSDIR}/$I
++
++.PRECIOUS: ${DESTDIR}${INCSDIR}/$I
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${INCSDIR}/$I
++.endif
++${DESTDIR}${INCSDIR}/$I: ${DESTDIR}${INCSDIR} $I 
++	@cmp -s $I ${.TARGET} > /dev/null 2>&1 || \
++	    (echo "${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} \
++		-g ${BINGRP} -m ${NONBINMODE} $I ${.TARGET}" && \
++	     ${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} -g ${BINGRP} \
++		-m ${NONBINMODE} $I ${.TARGET})
++.endfor
++.endif
++
++.endif # not symlinks
++
++.if defined(SYMLINKS) && !empty(SYMLINKS)
++incinstall::
++	@set ${SYMLINKS}; \
++	 while test $$# -ge 2; do \
++		l=$$1; \
++		shift; \
++		t=${DESTDIR}$$1; \
++		shift; \
++		echo ".include <bsd.own.mk>"; \
++		echo "all:: $$t"; \
++		echo ".PHONY: $$t"; \
++		echo "$$t:"; \
++		echo "	@echo \"$$t -> $$l\""; \
++		echo "	@rm -rf $$t"; \
++		echo "	@ln -s $$l $$t"; \
++	done | ${MAKE} -f-
++.endif
++
++.if !target(incinstall)
++incinstall::
++.endif
++
++.include <bsd.subdir.mk>
+--- pmake-1.111.orig/mk/bsd.kmod.mk
++++ pmake-1.111/mk/bsd.kmod.mk
+@@ -0,0 +1,95 @@
++#	$NetBSD: bsd.kmod.mk,v 1.30 1999/03/10 06:34:19 ross Exp $
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		cleankmod kmodinstall load unload
++realinstall:	kmodinstall
++clean cleandir distclean: cleankmod
++
++S?=		/sys
++KERN=		$S/kern
++
++CFLAGS+=	${COPTS} -D_KERNEL -D_LKM -I. -I${.CURDIR} -I$S -I$S/arch
++
++DPSRCS+=	${SRCS:M*.l:.l=.c} ${SRCS:M*.y:.y=.c}
++CLEANFILES+=	${DPSRCS}
++.if defined(YHEADER)
++CLEANFILES+=	${SRCS:M*.y:.y=.h}
++.endif
++
++OBJS+=		${SRCS:N*.h:N*.sh:R:S/$/.o/g}
++
++.if !defined(PROG)
++PROG=	${KMOD}.o
++.endif
++
++${PROG}: ${DPSRCS} ${OBJS} ${DPADD}
++	${LD} -r ${LDFLAGS} -o tmp.o ${OBJS}
++	mv tmp.o ${.TARGET}
++
++.if	!defined(MAN)
++MAN=	${KMOD}.4
++.endif
++
++all: machine-links ${PROG}
++
++.PHONY:	machine-links
++beforedepend: machine-links
++machine-links:
++	-rm -f machine && \
++	    ln -s $S/arch/${MACHINE}/include machine
++	-rm -f ${MACHINE_ARCH} && \
++	    ln -s $S/arch/${MACHINE_ARCH}/include ${MACHINE_ARCH}
++CLEANFILES+=machine ${MACHINE_ARCH}
++
++cleankmod:
++	rm -f a.out [Ee]rrs mklog core *.core \
++		${PROG} ${OBJS} ${LOBJS} ${CLEANFILES}
++
++#
++# define various install targets
++#
++.if !target(kmodinstall)
++kmodinstall:: ${DESTDIR}${KMODDIR}/${PROG}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${KMODDIR}/${PROG}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${KMODDIR}/${PROG}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${KMODDIR}/${PROG}
++${DESTDIR}${KMODDIR}/${PROG}: ${PROG}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${KMODOWN} -g ${KMODGRP} \
++		-m ${KMODMODE} ${.ALLSRC} ${.TARGET}
++.endif
++
++lint: ${LOBJS}
++.if defined(LOBJS) && !empty(LOBJS)
++	${LINT} ${LINTFLAGS} ${LDFLAGS:M-L*} ${LOBJS} ${LDADD}
++.endif
++
++.if !target(load)
++load:	${PROG}
++	/sbin/modload -o ${KMOD} -e${KMOD}_lkmentry ${PROG}
++.endif
++
++.if !target(unload)
++unload: ${PROG}
++	/sbin/modunload -n ${KMOD}
++.endif
++
++.include <bsd.man.mk>
++.include <bsd.links.mk>
++.include <bsd.dep.mk>
++.include <bsd.sys.mk>
++
++.-include "machine/Makefile.inc"
+--- pmake-1.111.orig/mk/bsd.lib.mk
++++ pmake-1.111/mk/bsd.lib.mk
+@@ -0,0 +1,396 @@
++#	$NetBSD: bsd.lib.mk,v 1.152 1999/03/30 09:30:43 fair Exp $
++#	@(#)bsd.lib.mk	8.3 (Berkeley) 4/22/94
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		checkver cleanlib libinstall
++realinstall:	checkver libinstall
++clean cleandir distclean: cleanlib
++
++.if exists(${.CURDIR}/shlib_version)
++SHLIB_MAJOR != . ${.CURDIR}/shlib_version ; echo $$major
++SHLIB_MINOR != . ${.CURDIR}/shlib_version ; echo $$minor
++
++# Check for higher installed library versions.
++.if !defined(NOCHECKVER) && !defined(NOCHECKVER_${LIB}) && \
++	exists(${BSDSRCDIR}/lib/checkver)
++checkver:
++	@(cd ${.CURDIR} && \
++		${BSDSRCDIR}/lib/checkver -d ${DESTDIR}${LIBDIR} ${LIB})
++.else
++checkver:
++.endif
++.else
++checkver:
++.endif
++
++# add additional suffixes not exported.
++# .po is used for profiling object files.
++# .so is used for PIC object files.
++.SUFFIXES: .out .a .ln .so .po .o .s .S .c .cc .C .m .F .f .r .y .l .cl .p .h
++.SUFFIXES: .sh .m4 .m
++
++
++# Set PICFLAGS to cc flags for producing position-independent code,
++# if not already set.  Includes -DPIC, if required.
++
++# Data-driven table using make variables to control  how shared libraries
++# are built for different platforms and object formats.
++# OBJECT_FMT:		currently either "ELF" or "a.out", from <bsd.own.mk>
++# SHLIB_SOVERSION:  	version number to be compiled into a shared library
++#                    	via -soname. Usualy ${SHLIB_MAJOR} on ELF.
++#   			NetBSD/pmax used to use ${SHLIB_MAJOR}.{SHLIB-MINOR}.
++# SHLIB_SHFLAGS:	Flags to tell ${LD} to emit  shared library.
++#			with ELF, also set shared-lib version for ld.so.
++# SHLIB_LDSTARTFILE:	support .o file, call C++ file-level constructors
++# SHLIB_LDENDFILE:	support .o file, call C++ file-level destructors
++# CPPICFLAGS:	flags for ${CPP} to preprocess  .[sS]  files for ${AS}
++# CPICFLAGS:	flags for ${CC} to compile  .[cC] files to .so objects.
++# CAPICFLAGS	flags for {$CC} to compiling .[Ss] files
++#		 	(usually just ${CPPPICFLAGS} ${CPICFLAGS})
++# APICFLAGS:	flags for ${AS} to assemble .[sS]  to .so objects.
++
++.if ${MACHINE_ARCH} == "alpha"
++		# Alpha-specific shared library flags
++CPICFLAGS ?= -fpic -DPIC
++CPPPICFLAGS?= -DPIC 
++CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
++APICFLAGS ?=
++.elif ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb"
++		# mips-specific shared library flags
++
++# On mips, all libs need to be compiled with ABIcalls, not just sharedlibs.
++CPICFLAGS?=
++APICFLAGS?=
++#CPICFLAGS?= -fpic -DPIC
++#APICFLAGS?= -DPIC
++
++# so turn shlib PIC flags on for ${CPP}, ${CC}, and ${AS} as follows:
++AINC+=-DPIC -DABICALLS
++COPTS+=	-fPIC ${AINC}
++AFLAGS+= -fPIC
++AS+=	-KPIC
++
++.elif ${MACHINE_ARCH} == "sparc" && ${OBJECT_FMT} == "ELF"
++
++CPICFLAGS ?= -fpic -DPIC
++CPPPICFLAGS?= -DPIC 
++CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
++APICFLAGS ?= -KPIC
++
++.elif (${MACHINE} == "debian")
++
++SHLIB_TYPE=ELF
++SHLIB_LDSTARTFILE=
++SHLIB_LDENDFILE=
++SHLIB_SOVERSION=${SHLIB_MAJOR}
++CPICFLAGS ?= -fPIC -DPIC
++CPPPICFLAGS?= -DPIC
++CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
++APICFLAGS ?=
++
++.else
++
++# Platform-independent flags for NetBSD a.out shared libraries (and PowerPC)
++SHLIB_LDSTARTFILE=
++SHLIB_LDENDFILE=
++SHLIB_SHFLAGS=
++SHLIB_SOVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR}
++CPICFLAGS?= -fpic -DPIC
++CPPPICFLAGS?= -DPIC 
++CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
++APICFLAGS?= -k
++
++.endif
++
++# Platform-independent linker flags for ELF shared libraries
++.if ${OBJECT_FMT} == "ELF"
++SHLIB_SOVERSION=${SHLIB_MAJOR}
++SHLIB_SHFLAGS=-soname lib${LIB}.so.${SHLIB_SOVERSION}
++SHLIB_LDSTARTFILE= ${DESTDIR}/usr/lib/crtbeginS.o
++SHLIB_LDENDFILE= ${DESTDIR}/usr/lib/crtendS.o
++.endif
++
++CFLAGS+=	${COPTS}
++
++.c.o:
++	@echo ${COMPILE.c:Q} ${.IMPSRC}
++	@${COMPILE.c} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.c.po:
++	@echo ${COMPILE.c:Q} -pg ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.c} -pg ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.c.so:
++	@echo ${COMPILE.c:Q} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.c} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.c.ln:
++	${LINT} ${LINTFLAGS} ${CPPFLAGS:M-[IDU]*} -i ${.IMPSRC}
++
++.cc.o .C.o:
++	@echo ${COMPILE.cc:Q} ${.IMPSRC}
++	@${COMPILE.cc} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.cc.po .C.po:
++	@echo ${COMPILE.cc:Q} -pg ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.cc} -pg ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.cc.so .C.so:
++	@echo ${COMPILE.cc:Q} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.cc} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.m.o:
++	@echo ${COMPILE.m:Q} ${.IMPSRC}
++	@${COMPILE.m} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.m.po:
++	@echo ${COMPILE.m:Q} -pg ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.m} -pg ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.m.so:
++	@echo ${COMPILE.m:Q} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.m} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.S.o .s.o:
++	@echo ${COMPILE.S:Q} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC}
++	@${COMPILE.S} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.S.po .s.po:
++	@echo ${COMPILE.S:Q} -DGPROF -DPROF ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.S} -DGPROF -DPROF ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.S.so .s.so:
++	@echo ${COMPILE.S:Q} ${CAPICFLAGS} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.S} ${CAPICFLAGS} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.if ${MKPIC} == "no" || (defined(LDSTATIC) && ${LDSTATIC} != "") \
++	|| ${MKLINKLIB} != "no"
++_LIBS=lib${LIB}.a
++.else
++_LIBS=
++.endif
++
++.if ${MKPROFILE} != "no"
++_LIBS+=lib${LIB}_p.a
++.endif
++
++.if ${MKPIC} != "no"
++_LIBS+=lib${LIB}_pic.a
++.if defined(SHLIB_MAJOR) && defined(SHLIB_MINOR)
++_LIBS+=lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++.endif
++.endif
++
++.if ${MKLINT} != "no" && ${MKLINKLIB} != "no"
++_LIBS+=llib-l${LIB}.ln
++.endif
++
++all: ${SRCS} ${_LIBS}
++
++__archivebuild: .USE
++	@rm -f ${.TARGET}
++	@${AR} cq ${.TARGET} `NM=${NM} ${LORDER} ${.ALLSRC:M*o} | ${TSORT}`
++	${RANLIB} ${.TARGET}
++
++__archiveinstall: .USE
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${LIBOWN} -g ${LIBGRP} \
++		-m 600 ${.ALLSRC} ${.TARGET}
++	${RANLIB} -t ${.TARGET}
++	chmod ${LIBMODE} ${.TARGET}
++
++DPSRCS+=	${SRCS:M*.l:.l=.c} ${SRCS:M*.y:.y=.c}
++CLEANFILES+=	${DPSRCS}
++.if defined(YHEADER)
++CLEANFILES+=	${SRCS:M*.y:.y=.h}
++.endif
++
++OBJS+=		${SRCS:N*.h:N*.sh:R:S/$/.o/g}
++lib${LIB}.a:: ${OBJS} __archivebuild
++	@echo building standard ${LIB} library
++
++POBJS+=		${OBJS:.o=.po}
++lib${LIB}_p.a:: ${POBJS} __archivebuild
++	@echo building profiled ${LIB} library
++
++SOBJS+=		${OBJS:.o=.so}
++lib${LIB}_pic.a:: ${SOBJS} __archivebuild
++	@echo building shared object ${LIB} library
++
++lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}: lib${LIB}_pic.a ${DPADD} \
++    ${SHLIB_LDSTARTFILE} ${SHLIB_LDENDFILE}
++	@echo building shared ${LIB} library \(version ${SHLIB_MAJOR}.${SHLIB_MINOR}\)
++	@rm -f lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++.if defined(DESTDIR)
++	$(CC) -shared ${SHLIB_SHFLAGS} -o ${.TARGET} \
++	    ${SHLIB_LDSTARTFILE} \
++	    -Wl,--whole-archive lib${LIB}_pic.a \
++	    -nostdlib -L${DESTDIR}${LIBDIR} -R${LIBDIR} \
++	    -Wl,--no-whole-archive ${LDADD} \
++	    ${SHLIB_LDENDFILE}
++.else
++	$(CC) -shared ${SHLIB_SHFLAGS} -o ${.TARGET} \
++	    ${SHLIB_LDSTARTFILE} \
++	    -Wl,--whole-archive lib${LIB}_pic.a -Wl,--no-whole-archive ${LDADD} \
++	    ${SHLIB_LDENDFILE}
++.endif
++.if ${OBJECT_FMT} == "ELF"
++	rm -f lib${LIB}.so.${SHLIB_MAJOR}
++	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
++	    lib${LIB}.so.${SHLIB_MAJOR}
++	rm -f lib${LIB}.so
++	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
++	    lib${LIB}.so
++.endif
++
++LOBJS+=		${LSRCS:.c=.ln} ${SRCS:M*.c:.c=.ln}
++LLIBS?=		-lc
++llib-l${LIB}.ln: ${LOBJS}
++	@echo building llib-l${LIB}.ln
++	@rm -f llib-l${LIB}.ln
++	@${LINT} -C${LIB} ${.ALLSRC} ${LLIBS}
++
++cleanlib:
++	rm -f a.out [Ee]rrs mklog core *.core ${CLEANFILES}
++	rm -f lib${LIB}.a ${OBJS}
++	rm -f lib${LIB}_p.a ${POBJS}
++	rm -f lib${LIB}_pic.a lib${LIB}.so.* lib${LIB}.so ${SOBJS}
++	rm -f llib-l${LIB}.ln ${LOBJS}
++
++.if defined(SRCS)
++afterdepend: .depend
++	@(TMP=/tmp/_depend$$$$; \
++	    sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.po \1.so \1.ln:/' \
++	      < .depend > $$TMP; \
++	    mv $$TMP .depend)
++.endif
++
++.if !target(libinstall)
++# Make sure it gets defined, in case MKPIC==no && MKLINKLIB==no
++libinstall::
++
++.if ${MKLINKLIB} != "no"
++libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}.a
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}.a
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LIBDIR}/lib${LIB}.a: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}.a
++${DESTDIR}${LIBDIR}/lib${LIB}.a: lib${LIB}.a __archiveinstall
++.endif
++
++.if ${MKPROFILE} != "no"
++libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LIBDIR}/lib${LIB}_p.a: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
++${DESTDIR}${LIBDIR}/lib${LIB}_p.a: lib${LIB}_p.a __archiveinstall
++.endif
++
++.if ${MKPIC} != "no" && ${MKPICINSTALL} != "no"
++libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LIBDIR}/lib${LIB}_pic.a: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
++${DESTDIR}${LIBDIR}/lib${LIB}_pic.a: lib${LIB}_pic.a __archiveinstall
++.endif
++
++.if ${MKPIC} != "no" && defined(SHLIB_MAJOR) && defined(SHLIB_MINOR)
++libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}: lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${LIBOWN} -g ${LIBGRP} \
++		-m ${LIBMODE} ${.ALLSRC} ${.TARGET}
++.if ${OBJECT_FMT} == "a.out" && !defined(DESTDIR)
++	/sbin/ldconfig -m ${LIBDIR}
++.endif
++.if ${OBJECT_FMT} == "ELF"
++	rm -f ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}
++	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
++	    ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}
++	rm -f ${DESTDIR}${LIBDIR}/lib${LIB}.so
++.if ${MKLINKLIB} != "no"
++	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
++	    ${DESTDIR}${LIBDIR}/lib${LIB}.so
++.endif
++.endif
++.endif
++
++.if ${MKLINT} != "no" && ${MKLINKLIB} != "no"
++libinstall:: ${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln
++${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln: llib-l${LIB}.ln
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${LIBOWN} -g ${LIBGRP} \
++		-m ${LIBMODE} ${.ALLSRC} ${DESTDIR}${LINTLIBDIR}
++.endif
++.endif
++
++.include <bsd.man.mk>
++.include <bsd.nls.mk>
++.include <bsd.files.mk>
++.include <bsd.inc.mk>
++.include <bsd.links.mk>
++.include <bsd.dep.mk>
++.include <bsd.sys.mk>
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++lint regress:
+--- pmake-1.111.orig/mk/bsd.links.mk
++++ pmake-1.111/mk/bsd.links.mk
+@@ -0,0 +1,43 @@
++#	$NetBSD: bsd.links.mk,v 1.8 1998/12/31 15:28:52 castor Exp $
++
++.PHONY:		linksinstall
++realinstall:	linksinstall
++
++.if defined(SYMLINKS) && !empty(SYMLINKS)
++linksinstall::
++	@set ${SYMLINKS}; \
++	 while test $$# -ge 2; do \
++		l=$$1; \
++		shift; \
++		t=${DESTDIR}$$1; \
++		shift; \
++		echo ".include <bsd.own.mk>"; \
++		echo "all:: $$t"; \
++		echo ".PHONY: $$t"; \
++		echo "$$t:"; \
++		echo "	@echo \"$$t -> $$l\""; \
++		echo "	@rm -f $$t"; \
++		echo "	@ln -s $$l $$t"; \
++	done | ${MAKE} -f-
++.endif
++.if defined(LINKS) && !empty(LINKS)
++linksinstall::
++	@set ${LINKS}; \
++	 while test $$# -ge 2; do \
++		l=${DESTDIR}$$1; \
++		shift; \
++		t=${DESTDIR}$$1; \
++		shift; \
++		echo ".include <bsd.own.mk>"; \
++		echo "all:: $$t"; \
++		echo ".PHONY: $$t"; \
++		echo "$$t:"; \
++		echo "	@echo \"$$t -> $$l\""; \
++		echo "	@rm -f $$t"; \
++		echo "	@ln $$l $$t"; \
++	done | ${MAKE} -f-
++.endif
++
++.if !target(linksinstall)
++linksinstall:
++.endif
+--- pmake-1.111.orig/mk/bsd.man.mk
++++ pmake-1.111/mk/bsd.man.mk
+@@ -0,0 +1,156 @@
++#	$NetBSD: bsd.man.mk,v 1.45 1999/02/13 16:34:39 christos Exp $
++#	@(#)bsd.man.mk	8.1 (Berkeley) 6/8/93
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		catinstall maninstall catpages manpages catlinks manlinks cleanman
++.if ${MKMAN} != "no"
++realinstall:	${MANINSTALL}
++.endif
++cleandir distclean: cleanman
++
++MANTARGET?=	cat
++NROFF?=		nroff
++TBL?=		tbl
++
++.SUFFIXES: .1 .2 .3 .4 .5 .6 .7 .8 .9 \
++	   .cat1 .cat2 .cat3 .cat4 .cat5 .cat6 .cat7 .cat8 .cat9
++
++.9.cat9 .8.cat8 .7.cat7 .6.cat6 .5.cat5 .4.cat4 .3.cat3 .2.cat2 .1.cat1:
++.if !defined(USETBL)
++	@echo "${NROFF} -mandoc ${.IMPSRC} > ${.TARGET}"
++	@${NROFF} -mandoc ${.IMPSRC} > ${.TARGET} || \
++	 (rm -f ${.TARGET}; false)
++.else
++	@echo "${TBL} ${.IMPSRC} | ${NROFF} -mandoc > ${.TARGET}"
++	@${TBL} ${.IMPSRC} | ${NROFF} -mandoc > ${.TARGET} || \
++	 (rm -f ${.TARGET}; false)
++.endif
++
++.if defined(MAN) && !empty(MAN)
++MANPAGES=	${MAN}
++CATPAGES=	${MANPAGES:C/(.*).([1-9])/\1.cat\2/}
++.endif
++
++MINSTALL=	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${MANOWN} \
++			-g ${MANGRP} -m ${MANMODE}
++
++.if defined(MANZ)
++# chown and chmod are done afterward automatically
++MCOMPRESS=	gzip -9cf
++MCOMPRESSSUFFIX= .gz
++.endif
++
++catinstall: catlinks
++maninstall: manlinks
++
++__installpage: .USE
++.if defined(MCOMPRESS) && !empty(MCOMPRESS)
++	@rm -f ${.TARGET}
++	${MCOMPRESS} ${.ALLSRC} > ${.TARGET}
++	@chown ${MANOWN}:${MANGRP} ${.TARGET}
++	@chmod ${MANMODE} ${.TARGET}
++.else
++	${MINSTALL} ${.ALLSRC} ${.TARGET}
++.endif
++
++
++# Rules for cat'ed man page installation
++.if defined(CATPAGES) && !empty(CATPAGES) && ${MKCATPAGES} != "no"
++.   for P in ${CATPAGES}
++catpages:: ${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}
++
++.	if !defined(UPDATE)
++.PHONY: ${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}
++.	endif
++.	if !defined(BUILD)
++${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}: .MADE
++.	endif
++
++.PRECIOUS: ${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}
++${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}: ${P} __installpage
++.   endfor
++.else
++catpages::
++.endif
++
++# Rules for source page installation
++.if defined(MANPAGES) && !empty(MANPAGES)
++.   for P in ${MANPAGES}
++manpages:: ${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}
++.	if !defined(UPDATE)
++.PHONY: ${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}
++.	endif
++
++.PRECIOUS: ${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}
++${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}: ${P} __installpage
++.   endfor
++.else
++manpages::
++.endif
++
++.if ${MKCATPAGES} != "no"
++catlinks: catpages
++.if defined(MLINKS) && !empty(MLINKS)
++	@set ${MLINKS}; \
++	while test $$# -ge 2; do \
++		name=$$1; \
++		shift; \
++		dir=${DESTDIR}${MANDIR}/cat$${name##*.}; \
++		l=$${dir}${MANSUBDIR}/$${name%.*}.0${MCOMPRESSSUFFIX}; \
++		name=$$1; \
++		shift; \
++		dir=${DESTDIR}${MANDIR}/cat$${name##*.}; \
++		t=$${dir}${MANSUBDIR}/$${name%.*}.0${MCOMPRESSSUFFIX}; \
++		if [ -z "${UPDATE}" -o ! -f $$t ]; then \
++		    echo $$t -\> $$l; \
++		    ln -sf $$l $$t; \
++		fi; \
++	done
++.endif
++.else
++catlinks:
++.endif
++
++manlinks: manpages
++.if defined(MLINKS) && !empty(MLINKS)
++	@set ${MLINKS}; \
++	while test $$# -ge 2; do \
++		name=$$1; \
++		shift; \
++		dir=${DESTDIR}${MANDIR}/man$${name##*.}; \
++		l=$${dir}${MANSUBDIR}/$${name}${MCOMPRESSSUFFIX}; \
++		name=$$1; \
++		shift; \
++		dir=${DESTDIR}${MANDIR}/man$${name##*.}; \
++		t=$${dir}${MANSUBDIR}/$${name}${MCOMPRESSSUFFIX}; \
++		if [ -z "${UPDATE}" -o ! -f $$t ]; then \
++		    echo $$t -\> $$l; \
++		    ln -sf $$l $$t; \
++		fi; \
++	done
++.endif
++
++.if defined(CATPAGES)
++.if ${MKCATPAGES} != "no" && ${MKMAN} != "no"
++all: ${CATPAGES}
++.else
++all:
++.endif
++
++cleanman:
++	rm -f ${CATPAGES}
++.else
++cleanman:
++.endif
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++clean depend includes lint regress tags:
+--- pmake-1.111.orig/mk/bsd.nls.mk
++++ pmake-1.111/mk/bsd.nls.mk
+@@ -0,0 +1,64 @@
++#	$NetBSD: bsd.nls.mk,v 1.17 1999/02/12 12:38:45 lukem Exp $
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++
++.MAIN:		all
++.endif
++.PHONY:		cleannls nlsinstall
++.if ${MKNLS} != "no"
++realinstall:	nlsinstall
++.endif
++cleandir distclean: cleannls
++
++.SUFFIXES: .cat .msg
++
++.msg.cat:
++	@rm -f ${.TARGET}
++	gencat ${.TARGET} ${.IMPSRC}
++
++.if defined(NLS) && !empty(NLS)
++NLSALL= ${NLS:.msg=.cat}
++.endif
++
++.if !defined(NLSNAME)
++.if defined(PROG)
++NLSNAME=${PROG}
++.else
++NLSNAME=lib${LIB}
++.endif
++.endif
++
++.if defined(NLSALL)
++.if ${MKNLS} != "no"
++all: ${NLSALL}
++.endif
++
++cleannls:
++	rm -f ${NLSALL}
++
++.for F in ${NLSALL}
++nlsinstall:: ${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat
++.endif
++.if !defined(BUILD)
++${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat
++${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat: ${F}
++	${INSTALL} -d ${.TARGET:H}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${NLSOWN} -g ${NLSGRP} \
++		-m ${NLSMODE} ${.ALLSRC} ${.TARGET}
++.endfor
++.else
++cleannls:
++.endif
++
++.if !target(nlsinstall)
++nlsinstall::
++.endif
+--- pmake-1.111.orig/mk/bsd.obj.mk
++++ pmake-1.111/mk/bsd.obj.mk
+@@ -0,0 +1,54 @@
++#	$NetBSD: bsd.obj.mk,v 1.17 1999/02/12 04:13:26 lukem Exp $
++
++.if !target(__initialized_obj__)
++__initialized_obj__:
++.include <bsd.own.mk>
++.endif
++
++.if ${MKOBJ} == "no"
++obj:
++.else
++
++.if defined(OBJMACHINE)
++__objdir=	obj.${MACHINE}
++.else
++__objdir=	obj
++.endif
++
++.if defined(USR_OBJMACHINE)
++__usrobjdir=	${BSDOBJDIR}.${MACHINE}
++__usrobjdirpf=	
++.else
++__usrobjdir=	${BSDOBJDIR}
++.if defined(OBJMACHINE)
++__usrobjdirpf=	.${MACHINE}
++.else
++__usrobjdirpf=
++.endif
++.endif
++
++obj:
++	@cd ${.CURDIR}; rm -f ${__objdir} > /dev/null 2>&1 || true; \
++	here=`/bin/pwd`; subdir=$${here#${BSDSRCDIR}/}; \
++	if test $$here != $$subdir ; then \
++		dest=${__usrobjdir}/$$subdir${__usrobjdirpf} ; \
++		echo "$$here/${__objdir} -> $$dest"; \
++		rm -rf ${__objdir}; \
++		ln -s $$dest ${__objdir}; \
++		if test -d ${__usrobjdir} -a ! -d $$dest; then \
++			mkdir -p $$dest; \
++		else \
++			true; \
++		fi; \
++	else \
++		true ; \
++		dest=$$here/${__objdir} ; \
++		if test ! -d ${__objdir} ; then \
++			echo "making $$dest" ; \
++			mkdir $$dest; \
++		fi ; \
++	fi;
++.endif
++
++print-objdir:
++	@echo ${.OBJDIR}
+--- pmake-1.111.orig/mk/bsd.own.mk
++++ pmake-1.111/mk/bsd.own.mk
+@@ -0,0 +1,245 @@
++#	$NetBSD: bsd.own.mk,v 1.120 1999/02/24 14:42:36 drochner Exp $
++
++.if !defined(_BSD_OWN_MK_)
++_BSD_OWN_MK_=1
++
++.if defined(MAKECONF) && exists(${MAKECONF})
++.include "${MAKECONF}"
++.elif exists(/etc/mk.conf)
++.include "/etc/mk.conf"
++.endif
++
++# Defining `SKEY' causes support for S/key authentication to be compiled in.
++SKEY=		yes
++# Defining `KERBEROS' causes support for Kerberos authentication to be
++# compiled in.
++#KERBEROS=	yes
++# Defining 'KERBEROS5' causes support for Kerberos5 authentication to be
++# compiled in.
++#KERBEROS5=	yes
++
++# where the system object and source trees are kept; can be configurable
++# by the user in case they want them in ~/foosrc and ~/fooobj, for example
++BSDSRCDIR?=	/usr/src
++BSDOBJDIR?=	/usr/obj
++
++BINGRP?=	root
++BINOWN?=	root
++BINMODE?=	755
++NONBINMODE?=	644
++
++# Define MANZ to have the man pages compressed (gzip)
++MANZ=		1
++
++MANDIR?=	/usr/share/man
++MANGRP?=	root
++MANOWN?=	root
++MANMODE?=	${NONBINMODE}
++MANINSTALL?=	maninstall catinstall
++
++INFODIR?=	/usr/share/info
++INFOGRP?=	root
++INFOOWN?=	root
++INFOMODE?=	${NONBINMODE}
++
++LIBDIR?=	/usr/lib
++LINTLIBDIR?=	/usr/libdata/lint
++LIBGRP?=	${BINGRP}
++LIBOWN?=	${BINOWN}
++LIBMODE?=	${NONBINMODE}
++
++DOCDIR?=        /usr/share/doc
++DOCGRP?=	root
++DOCOWN?=	root
++DOCMODE?=       ${NONBINMODE}
++
++NLSDIR?=	/usr/share/nls
++NLSGRP?=	root
++NLSOWN?=	root
++NLSMODE?=	${NONBINMODE}
++
++KMODDIR?=	/usr/lkm
++KMODGRP?=	root
++KMODOWN?=	root
++KMODMODE?=	${NONBINMODE}
++
++COPY?=		-c
++.if defined(UPDATE)
++PRESERVE?=	-p
++.else
++PRESERVE?=
++.endif
++RENAME?=
++STRIPFLAG?=	-s
++
++# Define SYS_INCLUDE to indicate whether you want symbolic links to the system
++# source (``symlinks''), or a separate copy (``copies''); (latter useful
++# in environments where it's not possible to keep /sys publicly readable)
++#SYS_INCLUDE= 	symlinks
++
++# XXX The next two are temporary until the transition to UVM is complete.
++
++# Systems on which UVM is the standard VM system.
++.if ${MACHINE} != "pica"
++UVM?=		yes
++.endif
++
++# Systems that use UVM's new pmap interface.
++.if ${MACHINE} == "alpha" || \
++    ${MACHINE} == "i386" || \
++    ${MACHINE} == "pc532" || \
++    ${MACHINE} == "vax"
++PMAP_NEW?=	yes
++.endif
++
++# Data-driven table using make variables to control how 
++# toolchain-dependent targets and shared libraries are built
++# for different platforms and object formats.
++# OBJECT_FMT:		currently either "ELF" or "a.out".
++# SHLIB_TYPE:		"ELF" or "a.out" or "" to force static libraries.
++#
++#.if ${MACHINE_ARCH} == "alpha" || \
++#    ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb" || \
++#    ${MACHINE_ARCH} == "powerpc" || \
++#    ${MACHINE_ARCH} == "sparc64"
++#OBJECT_FMT?=ELF
++#.else
++
++# On Debian GNU/Linux, Everything is ELF.
++OBJECT_FMT?=a.out
++#.endif
++
++# GNU sources and packages sometimes see architecture names differently.
++# This table maps an architecture name to its GNU counterpart.
++# Use as so:  ${GNU_ARCH.${TARGET_ARCH}} or ${MACHINE_GNU_ARCH}
++GNU_ARCH.alpha=alpha
++GNU_ARCH.arm32=arm
++GNU_ARCH.i386=i386
++GNU_ARCH.m68k=m68k
++GNU_ARCH.mipseb=mipseb
++GNU_ARCH.mipsel=mipsel
++GNU_ARCH.ns32k=ns32k
++GNU_ARCH.powerpc=powerpc
++GNU_ARCH.sparc=sparc
++GNU_ARCH.sparc64=sparc
++GNU_ARCH.vax=vax
++.if ${MACHINE_ARCH} == "mips"
++.INIT:
++	@echo Must set MACHINE_ARCH to one of mipseb or mipsel
++	@false
++.endif
++
++.if ${MACHINE_ARCH} == "sparc64"
++MACHINE_GNU_ARCH=${MACHINE_ARCH}
++.else
++MACHINE_GNU_ARCH=${GNU_ARCH.${MACHINE_ARCH}}
++.endif
++
++TARGETS+=	all clean cleandir depend distclean includes install lint obj \
++		regress tags
++.PHONY:		all clean cleandir depend distclean includes install lint obj \
++		regress tags beforedepend afterdepend beforeinstall \
++		afterinstall realinstall
++
++# set NEED_OWN_INSTALL_TARGET, if it's not already set, to yes
++# this is used by bsd.pkg.mk to stop "install" being defined
++NEED_OWN_INSTALL_TARGET?=	yes
++
++.if ${NEED_OWN_INSTALL_TARGET} == "yes"
++.if !target(install)
++install:	.NOTMAIN beforeinstall subdir-install realinstall afterinstall
++beforeinstall:	.NOTMAIN
++subdir-install:	.NOTMAIN beforeinstall
++realinstall:	.NOTMAIN beforeinstall
++afterinstall:	.NOTMAIN subdir-install realinstall
++.endif
++.endif
++
++# Define MKxxx variables (which are either yes or no) for users
++# to set in /etc/mk.conf and override on the make commandline.
++# These should be tested with `== "no"' or `!= "no"'.
++# The NOxxx variables should only be used by Makefiles.
++#
++
++MKCATPAGES?=no
++
++.if defined(NODOC)
++MKDOC=no
++#.elif !defined(MKDOC)
++#MKDOC=yes
++.else
++MKDOC?=yes
++.endif
++
++MKINFO?=yes
++
++.if defined(NOLINKLIB)
++MKLINKLIB=no
++.else
++MKLINKLIB?=yes
++.endif
++.if ${MKLINKLIB} == "no"
++MKPICINSTALL=no
++MKPROFILE=no
++.endif
++
++.if defined(NOLINT)
++MKLINT=no
++.else
++MKLINT?=yes
++.endif
++
++.if defined(NOMAN)
++MKMAN=no
++.else
++MKMAN?=yes
++.endif
++.if ${MKMAN} == "no"
++MKCATPAGES=no
++.endif
++
++.if defined(NONLS)
++MKNLS=no
++.else
++MKNLS?=yes
++.endif
++
++.if defined(NOOBJ)
++MKOBJ=no
++.else
++MKOBJ?=yes
++.endif
++
++.if defined(NOPIC)
++MKPIC=no
++.else
++MKPIC?=yes
++.endif
++
++.if defined(NOPICINSTALL)
++MKPICINSTALL=no
++.else
++MKPICINSTALL?=yes
++.endif
++
++.if defined(NOPROFILE)
++MKPROFILE=no
++.else
++MKPROFILE?=yes
++.endif
++
++.if defined(NOSHARE)
++MKSHARE=no
++.else
++MKSHARE?=yes
++.endif
++.if ${MKSHARE} == "no"
++MKCATPAGES=no
++MKDOC=no
++MKINFO=no
++MKMAN=no
++MKNLS=no
++.endif
++
++
++.endif		# _BSD_OWN_MK_
+--- pmake-1.111.orig/mk/bsd.prog.mk
++++ pmake-1.111/mk/bsd.prog.mk
+@@ -0,0 +1,202 @@
++#	$NetBSD: bsd.prog.mk,v 1.100 1999/02/12 01:10:08 lukem Exp $
++#	@(#)bsd.prog.mk	8.2 (Berkeley) 4/2/94
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		cleanprog proginstall scriptsinstall
++realinstall:	proginstall scriptsinstall
++clean cleandir distclean: cleanprog
++
++CFLAGS+=	${COPTS}
++
++# ELF platforms depend on crtbegin.o and crtend.o
++.if ${OBJECT_FMT} == "ELF"
++LIBCRTBEGIN?=	${DESTDIR}/usr/lib/crtbegin.o
++LIBCRTEND?=	${DESTDIR}/usr/lib/crtend.o
++.else
++LIBCRTBEGIN?=
++LIBCRTEND?=
++.endif
++
++LIBCRT0?=	
++
++LIBBZ2?=	${DESTDIR}/usr/lib/libbz2.a
++LIBC?=		${DESTDIR}/usr/lib/libc.a
++LIBC_PIC?=	${DESTDIR}/usr/lib/libc_pic.a
++LIBCOMPAT?=	${DESTDIR}/usr/lib/libcompat.a
++LIBCRYPT?=	${DESTDIR}/usr/lib/libcrypt.a
++LIBCURSES?=	${DESTDIR}/usr/lib/libcurses.a
++LIBDBM?=	${DESTDIR}/usr/lib/libdbm.a
++LIBDES?=	${DESTDIR}/usr/lib/libdes.a
++LIBEDIT?=	${DESTDIR}/usr/lib/libedit.a
++LIBGCC?=	${DESTDIR}/usr/lib/libgcc.a
++LIBGNUMALLOC?=	${DESTDIR}/usr/lib/libgnumalloc.a
++LIBKDB?=	${DESTDIR}/usr/lib/libkdb.a
++LIBKRB?=	${DESTDIR}/usr/lib/libkrb.a
++LIBKVM?=	${DESTDIR}/usr/lib/libkvm.a
++LIBL?=		${DESTDIR}/usr/lib/libl.a
++LIBM?=		${DESTDIR}/usr/lib/libm.a
++LIBMP?=		${DESTDIR}/usr/lib/libmp.a
++LIBNTP?=	${DESTDIR}/usr/lib/libntp.a
++LIBOBJC?=	${DESTDIR}/usr/lib/libobjc.a
++LIBPC?=		${DESTDIR}/usr/lib/libpc.a
++LIBPCAP?=	${DESTDIR}/usr/lib/libpcap.a
++LIBPLOT?=	${DESTDIR}/usr/lib/libplot.a
++LIBPOSIX?=	${DESTDIR}/usr/lib/libposix.a
++LIBRESOLV?=	${DESTDIR}/usr/lib/libresolv.a
++LIBRPCSVC?=	${DESTDIR}/usr/lib/librpcsvc.a
++LIBSKEY?=	${DESTDIR}/usr/lib/libskey.a
++LIBTERMCAP?=	${DESTDIR}/usr/lib/libtermcap.a
++LIBTELNET?=	${DESTDIR}/usr/lib/libtelnet.a
++LIBUTIL?=	${DESTDIR}/usr/lib/libutil.a
++LIBWRAP?=	${DESTDIR}/usr/lib/libwrap.a
++LIBY?=		${DESTDIR}/usr/lib/liby.a
++LIBZ?=		${DESTDIR}/usr/lib/libz.a
++
++.if defined(SHAREDSTRINGS)
++CLEANFILES+=strings
++.c.o:
++	${CC} -E ${CFLAGS} ${.IMPSRC} | xstr -c -
++	@${CC} ${CFLAGS} -c x.c -o ${.TARGET}
++	@rm -f x.c
++
++.cc.o:
++	${CXX} -E ${CXXFLAGS} ${.IMPSRC} | xstr -c -
++	@mv -f x.c x.cc
++	@${CXX} ${CXXFLAGS} -c x.cc -o ${.TARGET}
++	@rm -f x.cc
++
++.C.o:
++	${CXX} -E ${CXXFLAGS} ${.IMPSRC} | xstr -c -
++	@mv -f x.c x.C
++	@${CXX} ${CXXFLAGS} -c x.C -o ${.TARGET}
++	@rm -f x.C
++.endif
++
++
++.if defined(PROG)
++SRCS?=		${PROG}.c
++
++DPSRCS+=	${SRCS:M*.l:.l=.c} ${SRCS:M*.y:.y=.c}
++CLEANFILES+=	${DPSRCS}
++.if defined(YHEADER)
++CLEANFILES+=	${SRCS:M*.y:.y=.h}
++.endif
++
++.if !empty(SRCS:N*.h:N*.sh)
++OBJS+=		${SRCS:N*.h:N*.sh:R:S/$/.o/g}
++LOBJS+=		${LSRCS:.c=.ln} ${SRCS:M*.c:.c=.ln}
++.endif
++
++.if defined(OBJS) && !empty(OBJS)
++.NOPATH: ${OBJS}
++.if defined(DESTDIR)
++
++${PROG}: ${LIBCRT0} ${DPSRCS} ${OBJS} ${LIBC} ${LIBCRTBEGIN} ${LIBCRTEND} ${DPADD}
++	${CC} ${LDFLAGS} ${LDSTATIC} -o ${.TARGET} -nostdlib -L${DESTDIR}/usr/lib ${LIBCRT0} ${LIBCRTBEGIN} ${OBJS} ${LDADD} -lgcc -lc -lgcc ${LIBCRTEND}
++
++.else
++
++${PROG}: ${LIBCRT0} ${DPSRCS} ${OBJS} ${LIBC} ${LIBCRTBEGIN} ${LIBCRTEND} ${DPADD}
++	${CC} ${LDFLAGS} ${LDSTATIC} -o ${.TARGET} ${OBJS} ${LDADD}
++
++.endif	# defined(DESTDIR)
++.endif	# defined(OBJS) && !empty(OBJS)
++
++.if !defined(MAN)
++MAN=	${PROG}.1
++.endif	# !defined(MAN)
++.endif	# defined(PROG)
++
++all: ${PROG}
++
++cleanprog:
++	rm -f a.out [Ee]rrs mklog core *.core \
++	    ${PROG} ${OBJS} ${LOBJS} ${CLEANFILES}
++
++.if defined(SRCS)
++afterdepend: .depend
++	@(TMP=/tmp/_depend$$$$; \
++	    sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.ln:/' \
++	      < .depend > $$TMP; \
++	    mv $$TMP .depend)
++.endif
++
++.if defined(PROG) && !target(proginstall)
++PROGNAME?= ${PROG}
++proginstall:: ${DESTDIR}${BINDIR}/${PROGNAME}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${BINDIR}/${PROGNAME}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${BINDIR}/${PROGNAME}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${BINDIR}/${PROGNAME}
++${DESTDIR}${BINDIR}/${PROGNAME}: ${PROG}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} ${STRIPFLAG} -o ${BINOWN} \
++	    -g ${BINGRP} -m ${BINMODE} ${.ALLSRC} ${.TARGET}
++.endif
++
++.if !target(proginstall)
++proginstall::
++.endif
++
++.if defined(SCRIPTS) && !target(scriptsinstall)
++SCRIPTSDIR?=${BINDIR}
++SCRIPTSOWN?=${BINOWN}
++SCRIPTSGRP?=${BINGRP}
++SCRIPTSMODE?=${BINMODE}
++.for S in ${SCRIPTS}
++SCRIPTSDIR_${S}?=${SCRIPTSDIR}
++SCRIPTSOWN_${S}?=${SCRIPTSOWN}
++SCRIPTSGRP_${S}?=${SCRIPTSGRP}
++SCRIPTSMODE_${S}?=${SCRIPTSMODE}
++.if defined(SCRIPTSNAME)
++SCRIPTSNAME_${S} ?= ${SCRIPTSNAME}
++.else
++SCRIPTSNAME_${S} ?= ${S:T:R}
++.endif
++SCRIPTSDIR_${S} ?= ${SCRIPTSDIR}
++scriptsinstall:: ${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}
++${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}: ${S}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${SCRIPTSOWN_${S}} -g \
++	    ${SCRIPTSGRP_${S}} -m ${SCRIPTSMODE_${S}} ${.ALLSRC} ${.TARGET}
++.endfor
++.endif
++
++.if !target(scriptsinstall)
++scriptsinstall::
++.endif
++
++lint: ${LOBJS}
++.if defined(LOBJS) && !empty(LOBJS)
++	${LINT} ${LINTFLAGS} ${LDFLAGS:M-L*} ${LOBJS} ${LDADD}
++.endif
++
++.include <bsd.man.mk>
++.include <bsd.nls.mk>
++.include <bsd.files.mk>
++.include <bsd.inc.mk>
++.include <bsd.links.mk>
++.include <bsd.dep.mk>
++.include <bsd.sys.mk>
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++regress:
+--- pmake-1.111.orig/mk/bsd.subdir.mk
++++ pmake-1.111/mk/bsd.subdir.mk
+@@ -0,0 +1,34 @@
++#	$NetBSD: bsd.subdir.mk,v 1.31 1999/02/11 05:01:39 tv Exp $
++#	@(#)bsd.subdir.mk	8.1 (Berkeley) 6/8/93
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.MAIN:		all
++.endif
++
++.for dir in ${SUBDIR}
++.if exists(${dir}.${MACHINE})
++__REALSUBDIR+=${dir}.${MACHINE}
++.else
++__REALSUBDIR+=${dir}
++.endif
++.endfor
++
++.for dir in ${__REALSUBDIR}
++.for targ in ${TARGETS}
++.PHONY: ${targ}-${dir}
++${targ}-${dir}: .MAKE
++	@echo "${targ} ===> ${_THISDIR_}${dir}"
++	@cd ${.CURDIR}/${dir}; \
++	${MAKE} "_THISDIR_=${_THISDIR_}${dir}/" ${targ}
++subdir-${targ}: ${targ}-${dir}
++${targ}: subdir-${targ}
++.endfor
++.endfor
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++${TARGETS}:
+--- pmake-1.111.orig/mk/bsd.sys.mk
++++ pmake-1.111/mk/bsd.sys.mk
+@@ -0,0 +1,110 @@
++#	$NetBSD: bsd.sys.mk,v 1.34 1999/01/31 09:17:20 mrg Exp $
++#
++# Overrides used for NetBSD source tree builds.
++
++.if defined(WARNS) && ${WARNS} == 1
++CFLAGS+= -Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
++.endif
++.if !defined(NOGCCERROR)
++CFLAGS+= -Werror
++.endif
++CFLAGS+= ${CWARNFLAGS}
++
++.if defined(DESTDIR)
++CPPFLAGS+= -nostdinc -idirafter ${DESTDIR}/usr/include
++LINTFLAGS+= -d ${DESTDIR}/usr/include
++.endif
++
++.if defined(AUDIT)
++CPPFLAGS+= -D__AUDIT__
++.endif
++
++# Helpers for cross-compiling
++HOST_CC?=	cc
++HOST_CFLAGS?=	-O
++HOST_COMPILE.c?=${HOST_CC} ${HOST_CFLAGS} ${HOST_CPPFLAGS} -c
++HOST_LINK.c?=	${HOST_CC} ${HOST_CFLAGS} ${HOST_CPPFLAGS} ${HOST_LDFLAGS}
++
++HOST_CPP?=	cpp
++HOST_CPPFLAGS?=
++
++HOST_LD?=	ld
++HOST_LDFLAGS?=
++
++STRIPPROG?=	strip
++
++
++.SUFFIXES:	.m .o .ln .lo
++
++# Objective C
++# (Defined here rather than in <sys.mk> because `.m' is not just
++#  used for Objective C source)
++.m:
++	${LINK.m} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.m.o:
++	${COMPILE.m} ${.IMPSRC}
++
++# Host-compiled C objects
++.c.lo:
++	${HOST_COMPILE.c} -o ${.TARGET} ${.IMPSRC}
++
++
++.if defined(PARALLEL) || defined(LPREFIX)
++LPREFIX?=yy
++LFLAGS+=-P${LPREFIX}
++# Lex
++.l:
++	${LEX.l} -o${.TARGET:R}.${LPREFIX}.c ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} ${.TARGET:R}.${LPREFIX}.c ${LDLIBS} -ll
++	rm -f ${.TARGET:R}.${LPREFIX}.c
++.l.c:
++	${LEX.l} -o${.TARGET} ${.IMPSRC}
++.l.o:
++	${LEX.l} -o${.TARGET:R}.${LPREFIX}.c ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} ${.TARGET:R}.${LPREFIX}.c 
++	rm -f ${.TARGET:R}.${LPREFIX}.c
++.l.lo:
++	${LEX.l} -o${.TARGET:R}.${LPREFIX}.c ${.IMPSRC}
++	${HOST_COMPILE.c} -o ${.TARGET} ${.TARGET:R}.${LPREFIX}.c 
++	rm -f ${.TARGET:R}.${LPREFIX}.c
++.endif
++
++# Yacc
++.if defined(YHEADER) || defined(YPREFIX)
++.if defined(YPREFIX)
++YFLAGS+=-p${YPREFIX}
++.endif
++.if defined(YHEADER)
++YFLAGS+=-d
++.endif
++.y:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} ${.TARGET:R}.tab.c ${LDLIBS}
++	rm -f ${.TARGET:R}.tab.c ${.TARGET:R}.tab.h
++.y.h: ${.TARGET:R}.c
++.y.c:
++	${YACC.y} -o ${.TARGET} ${.IMPSRC}
++.y.o:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
++	rm -f ${.TARGET:R}.tab.c ${TARGET:R}.tab.h
++.y.lo:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${HOST_COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
++	rm -f ${.TARGET:R}.tab.c ${TARGET:R}.tab.h
++.elif defined(PARALLEL)
++.y:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} ${.TARGET:R}.tab.c ${LDLIBS}
++	rm -f ${.TARGET:R}.tab.c
++.y.c:
++	${YACC.y} -o ${.TARGET} ${.IMPSRC}
++.y.o:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
++	rm -f ${.TARGET:R}.tab.c
++.y.lo:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${HOST_COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
++	rm -f ${.TARGET:R}.tab.c
++.endif
+--- pmake-1.111.orig/mk/sys.mk
++++ pmake-1.111/mk/sys.mk
+@@ -0,0 +1,207 @@
++#	$NetBSD: sys.mk,v 1.54 1999/03/10 14:06:14 mycroft Exp $
++#	@(#)sys.mk	8.2 (Berkeley) 3/21/94
++
++unix?=		We run Debian GNU.
++
++.SUFFIXES: .out .a .ln .o .s .S .c .cc .C .F .f .r .y .l .cl .p .h .sh .m4
++
++.LIBS:		.a
++
++AR?=		ar
++ARFLAGS?=	rl
++RANLIB?=	ranlib
++
++AS?=		as
++AFLAGS?=
++COMPILE.s?=	${CC} ${AFLAGS} -c
++LINK.s?=	${CC} ${AFLAGS} ${LDFLAGS}
++COMPILE.S?=	${CC} ${AFLAGS} ${CPPFLAGS} -c -traditional-cpp
++LINK.S?=	${CC} ${AFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++CC?=		cc
++.if ${MACHINE_ARCH} == "alpha" || \
++    ${MACHINE_ARCH} == "arm32" || \
++    ${MACHINE_ARCH} == "i386" || \
++    ${MACHINE_ARCH} == "m68k" || \
++    ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb" || \
++    ${MACHINE_ARCH} == "sparc"
++CFLAGS?=	-O2
++.else
++CFLAGS?=	-O
++.endif
++COMPILE.c?=	${CC} ${CFLAGS} ${CPPFLAGS} -c
++LINK.c?=	${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++CXX?=		c++
++CXXFLAGS?=	${CFLAGS}
++COMPILE.cc?=	${CXX} ${CXXFLAGS} ${CPPFLAGS} -c
++LINK.cc?=	${CXX} ${CXXFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++OBJC?=		${CC}
++OBJCFLAGS?=	${CFLAGS}
++COMPILE.m?=	${OBJC} ${OBJCFLAGS} ${CPPFLAGS} -c
++LINK.m?=	${OBJC} ${OBJCFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++CPP?=		cpp
++CPPFLAGS?=	
++
++FC?=		f77
++FFLAGS?=	-O
++RFLAGS?=
++COMPILE.f?=	${FC} ${FFLAGS} -c
++LINK.f?=	${FC} ${FFLAGS} ${LDFLAGS}
++COMPILE.F?=	${FC} ${FFLAGS} ${CPPFLAGS} -c
++LINK.F?=	${FC} ${FFLAGS} ${CPPFLAGS} ${LDFLAGS}
++COMPILE.r?=	${FC} ${FFLAGS} ${RFLAGS} -c
++LINK.r?=	${FC} ${FFLAGS} ${RFLAGS} ${LDFLAGS}
++
++INSTALL?=	install
++
++LEX?=		lex
++LFLAGS?=
++LEX.l?=		${LEX} ${LFLAGS}
++
++LD?=		ld
++LDFLAGS?=
++
++LINT?=		lint
++LINTFLAGS?=	-chapbxzF
++
++LORDER?=	lorder
++
++MAKE?=		pmake
++
++NM?=		nm
++
++PC?=		pc
++PFLAGS?=
++COMPILE.p?=	${PC} ${PFLAGS} ${CPPFLAGS} -c
++LINK.p?=	${PC} ${PFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++SHELL?=		sh
++
++SIZE?=		size
++
++TSORT?= 	tsort
++
++YACC?=		yacc
++YFLAGS?=
++YACC.y?=	${YACC} ${YFLAGS}
++
++# C
++.c:
++	${LINK.c} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.c.o:
++	${COMPILE.c} ${.IMPSRC}
++.c.a:
++	${COMPILE.c} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++.c.ln:
++	${LINT} ${LINTFLAGS} ${CPPFLAGS:M-[IDU]*} -i ${.IMPSRC}
++
++# C++
++.cc:
++	${LINK.cc} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.cc.o:
++	${COMPILE.cc} ${.IMPSRC}
++.cc.a:
++	${COMPILE.cc} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++.C:
++	${LINK.cc} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.C.o:
++	${COMPILE.cc} ${.IMPSRC}
++.C.a:
++	${COMPILE.cc} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++# Fortran/Ratfor
++.f:
++	${LINK.f} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.f.o:
++	${COMPILE.f} ${.IMPSRC}
++.f.a:
++	${COMPILE.f} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++.F:
++	${LINK.F} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.F.o:
++	${COMPILE.F} ${.IMPSRC}
++.F.a:
++	${COMPILE.F} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++.r:
++	${LINK.r} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.r.o:
++	${COMPILE.r} ${.IMPSRC}
++.r.a:
++	${COMPILE.r} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++# Pascal
++.p:
++	${LINK.p} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.p.o:
++	${COMPILE.p} ${.IMPSRC}
++.p.a:
++	${COMPILE.p} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++# Assembly
++.s:
++	${LINK.s} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.s.o:
++	${COMPILE.s} ${.IMPSRC}
++.s.a:
++	${COMPILE.s} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++.S:
++	${LINK.S} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.S.o:
++	${COMPILE.S} ${.IMPSRC}
++.S.a:
++	${COMPILE.S} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++# Lex
++.l:
++	${LEX.l} ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} lex.yy.c ${LDLIBS} -ll
++	rm -f lex.yy.c
++.l.c:
++	${LEX.l} ${.IMPSRC}
++	mv lex.yy.c ${.TARGET}
++.l.o:
++	${LEX.l} ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} lex.yy.c 
++	rm -f lex.yy.c
++
++# Yacc
++.y:
++	${YACC.y} ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} y.tab.c ${LDLIBS}
++	rm -f y.tab.c
++.y.c:
++	${YACC.y} ${.IMPSRC}
++	mv y.tab.c ${.TARGET}
++.y.o:
++	${YACC.y} ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} y.tab.c
++	rm -f y.tab.c
++
++# Shell
++.sh:
++	rm -f ${.TARGET}
++	cp ${.IMPSRC} ${.TARGET}
diff --git a/package/pmake/pmake-110_mkdep.patch b/package/pmake/pmake-110_mkdep.patch
new file mode 100644
index 0000000..70435cc
--- /dev/null
+++ b/package/pmake/pmake-110_mkdep.patch
@@ -0,0 +1,230 @@
+Patch vampirised from Debian's package pmake_1.111-3.2:
+    http://snapshot.debian.org/archive/debian/20120601T033558Z/pool/main/p/pmake/
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+--- pmake-1.111.orig/mkdep
++++ pmake-1.111/mkdep
+@@ -0,0 +1,113 @@
++#!/bin/sh -
++#
++#	$OpenBSD: mkdep.gcc.sh,v 1.8 1998/09/02 06:40:07 deraadt Exp $
++#	$NetBSD: mkdep.gcc.sh,v 1.9 1994/12/23 07:34:59 jtc Exp $
++#
++# Copyright (c) 1991, 1993
++#	The Regents of the University of California.  All rights reserved.
++#
++# Redistribution and use in source and binary forms, with or without
++# modification, are permitted provided that the following conditions
++# are met:
++# 1. Redistributions of source code must retain the above copyright
++#    notice, this list of conditions and the following disclaimer.
++# 2. Redistributions in binary form must reproduce the above copyright
++#    notice, this list of conditions and the following disclaimer in the
++#    documentation and/or other materials provided with the distribution.
++# 3. All advertising materials mentioning features or use of this software
++#    must display the following acknowledgement:
++#	This product includes software developed by the University of
++#	California, Berkeley and its contributors.
++# 4. Neither the name of the University nor the names of its contributors
++#    may be used to endorse or promote products derived from this software
++#    without specific prior written permission.
++#
++# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
++# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
++# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
++# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
++# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
++# SUCH DAMAGE.
++#
++#	@(#)mkdep.gcc.sh	8.1 (Berkeley) 6/6/93
++#
++
++D=.depend			# default dependency file is .depend
++append=0
++pflag=
++
++while :
++	do case "$1" in
++		# -a appends to the depend file
++		-a)
++			append=1
++			shift ;;
++
++		# -f allows you to select a makefile name
++		-f)
++			D=$2
++			shift; shift ;;
++
++		# the -p flag produces "program: program.c" style dependencies
++		# so .o's don't get produced
++		-p)
++			pflag=p
++			shift ;;
++		*)
++			break ;;
++	esac
++done
++
++if [ $# = 0 ] ; then
++	echo 'usage: mkdep [-p] [-f depend_file] [cc_flags] file ...'
++	exit 1
++fi
++
++DTMP=/tmp/mkdep$$
++TMP=$DTMP/mkdep
++
++um=`umask`
++umask 022
++if ! mkdir $DTMP ; then
++	echo failed to create tmp dir $DTMP
++	exit 1
++fi
++
++umask $um
++trap 'rm -rf $DTMP ; trap 2 ; kill -2 $$' 1 2 3 13 15
++
++if [ x$pflag = x ]; then
++	${CC:-cc} -M "$@" | sed -e 's; \./; ;g' > $TMP
++else
++	${CC:-cc} -M "$@" | sed -e 's;\.o :; :;' -e 's; \./; ;g' > $TMP
++fi
++
++if [ $? != 0 ]; then
++	echo 'mkdep: compile failed.'
++	rm -rf $DTMP
++	exit 1
++fi
++
++if [ $append = 1 ]; then
++	cat $TMP >> $D
++	if [ $? != 0 ]; then
++		echo 'mkdep: append failed.'
++		rm -rf $DTMP
++		exit 1
++	fi
++else
++	mv $TMP $D
++	if [ $? != 0 ]; then
++		echo 'mkdep: rename failed.'
++		rm -rf $DTMP
++		exit 1
++	fi
++fi
++
++rm -rf $DTMP
++exit 0
+--- pmake-1.111.orig/mkdep.1
++++ pmake-1.111/mkdep.1
+@@ -0,0 +1,106 @@
++.\"	$OpenBSD: mkdep.1,v 1.3 1998/09/26 19:55:08 aaron Exp $
++.\"	$NetBSD: mkdep.1,v 1.3 1994/12/23 07:34:56 jtc Exp $
++.\"
++.\" Copyright (c) 1987, 1990, 1993
++.\"	The Regents of the University of California.  All rights reserved.
++.\"
++.\" Redistribution and use in source and binary forms, with or without
++.\" modification, are permitted provided that the following conditions
++.\" are met:
++.\" 1. Redistributions of source code must retain the above copyright
++.\"    notice, this list of conditions and the following disclaimer.
++.\" 2. Redistributions in binary form must reproduce the above copyright
++.\"    notice, this list of conditions and the following disclaimer in the
++.\"    documentation and/or other materials provided with the distribution.
++.\" 3. All advertising materials mentioning features or use of this software
++.\"    must display the following acknowledgement:
++.\"	This product includes software developed by the University of
++.\"	California, Berkeley and its contributors.
++.\" 4. Neither the name of the University nor the names of its contributors
++.\"    may be used to endorse or promote products derived from this software
++.\"    without specific prior written permission.
++.\"
++.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
++.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
++.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
++.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
++.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
++.\" SUCH DAMAGE.
++.\"
++.\"     @(#)mkdep.1	8.1 (Berkeley) 6/6/93
++.\"
++.Dd June 6, 1993
++.Dt MKDEP 1
++.Os BSD 4.2
++.Sh NAME
++.Nm mkdep
++.Nd construct Makefile dependency list
++.Sh SYNOPSIS
++.Nm mkdep
++.Op Fl ap
++.Op Fl f Ar file
++.Op Ar flags
++.Ar file Op Ar ...
++.Sh DESCRIPTION
++.Nm mkdep
++takes a set of flags for the C compiler and a list
++of C source files as arguments and constructs a set of include
++file dependencies which are written into the file ``.depend''.
++An example of its use in a Makefile might be:
++.Bd -literal -offset indent
++CFLAGS= -O -I../include
++SRCS= file1.c file2.c
++
++depend:
++	mkdep ${CFLAGS} ${SRCS}
++.Ed
++.Pp
++where the macro SRCS is the list of C source files and the macro
++CFLAGS is the list of flags for the C compiler.
++.Pp
++The options are as follows:
++.Bl -tag -width Ds
++.It Fl a
++Append to the output file,
++so that multiple
++.Nm mkdep Ns 's
++may be run from a single Makefile.
++.It Fl f Ar file
++Write the include file dependencies to 
++.Ar file ,
++instead of the default ``.depend''.
++.It Fl p
++Cause
++.Nm mkdep
++to produce dependencies of the form:
++.Bd -literal -offset indent
++program: program.c
++.Ed
++.Pp
++so that subsequent makes will produce
++.Ar program
++directly from its C module rather than using an intermediate
++.Pa \&.o
++module.
++This is useful for programs whose source is contained in a single
++module.
++.El
++.Sh SEE ALSO
++.Xr cc 1 ,
++.Xr cpp 1 ,
++.Xr make 1
++.Sh FILES
++.Bl -tag -width .depend -compact
++.It Pa .depend
++file containing list of dependencies
++.El
++.Sh HISTORY
++The
++.Nm mkdep
++command appeared in
++.Bx 4.3 Tahoe .
diff --git a/package/pmake/pmake-120_fixes.patch b/package/pmake/pmake-120_fixes.patch
new file mode 100644
index 0000000..5a57e4e
--- /dev/null
+++ b/package/pmake/pmake-120_fixes.patch
@@ -0,0 +1,266 @@
+Patch vampirised from Debian's package pmake_1.111-3.2:
+    http://snapshot.debian.org/archive/debian/20120601T033558Z/pool/main/p/pmake/
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+--- pmake-1.111.orig/arch.c
++++ pmake-1.111/arch.c
+@@ -173,7 +173,7 @@
+ static FILE *ArchFindMember(char *, char *, struct ar_hdr *, const char *);
+ #if defined(__svr4__) || defined(__SVR4) || defined(__ELF__)
+ #define SVR4ARCHIVES
+-static int ArchSVR4Entry(Arch *, char *, size_t, FILE *);
++static int ArchSVR4Entry(Arch *, char **, size_t, FILE *);
+ #endif
+ 
+ #ifdef CLEANUP
+@@ -535,7 +535,7 @@
+     Arch	  *ar;	      /* Archive descriptor */
+     Hash_Entry	  *he;	      /* Entry containing member's description */
+     struct ar_hdr arh;        /* archive-member header for reading archive */
+-    char	  memName[MAXPATHLEN+1];
++    char	  *memName = NULL; 
+     	    	    	    /* Current member name while hashing. */
+ 
+     /*
+@@ -617,7 +617,6 @@
+     ar->fnametab = NULL;
+     ar->fnamesize = 0;
+     Hash_InitTable(&ar->members, -1);
+-    memName[AR_MAX_NAME_LEN] = '\0';
+ 
+     while (fread ((char *)&arh, sizeof (struct ar_hdr), 1, arch) == 1) {
+ 	if (strncmp ( arh.ar_fmag, ARFMAG, sizeof (arh.ar_fmag)) != 0) {
+@@ -636,10 +635,9 @@
+ 	    arh.ar_size[sizeof(arh.ar_size)-1] = '\0';
+ 	    size = (int) strtol(arh.ar_size, NULL, 10);
+ 
+-	    (void) strncpy (memName, arh.ar_name, sizeof(arh.ar_name));
+-	    for (cp = &memName[AR_MAX_NAME_LEN]; *cp == ' '; cp--) {
+-		continue;
+-	    }
++	    memName = estrdup(arh.ar_name);
++
++	    for(cp = strchr(memName, 0)-1; *cp == ' '; cp--);
+ 	    cp[1] = '\0';
+ 
+ #ifdef SVR4ARCHIVES
+@@ -650,7 +648,7 @@
+ 		/*
+ 		 * svr4 magic mode; handle it
+ 		 */
+-		switch (ArchSVR4Entry(ar, memName, size, arch)) {
++		switch (ArchSVR4Entry(ar, &memName, size, arch)) {
+ 		case -1:  /* Invalid data */
+ 		    goto badarch;
+ 		case 0:	  /* List of files entry */
+@@ -675,8 +673,8 @@
+ 
+ 		unsigned int elen = atoi(&memName[sizeof(AR_EFMT1)-1]);
+ 
+-		if (elen > MAXPATHLEN)
+-			goto badarch;
++		memName = erealloc(memName, elen+1);
++		
+ 		if (fread (memName, elen, 1, arch) != 1)
+ 			goto badarch;
+ 		memName[elen] = '\0';
+@@ -692,6 +690,9 @@
+ 	    memcpy ((Address)Hash_GetValue (he), (Address)&arh,
+ 		sizeof (struct ar_hdr));
+ 	}
++	/* time to free memName */
++	free(memName);
++
+ 	fseek (arch, (size + 1) & ~1, SEEK_CUR);
+     }
+ 
+@@ -742,15 +743,15 @@
+  *-----------------------------------------------------------------------
+  */
+ static int
+-ArchSVR4Entry(Arch *ar, char *name, size_t size, FILE *arch)
++ArchSVR4Entry(Arch *ar, char **name, size_t size, FILE *arch)
+ {
+ #define ARLONGNAMES1 "//"
+ #define ARLONGNAMES2 "/ARFILENAMES"
+     size_t entry;
+     char *ptr, *eptr;
+ 
+-    if (strncmp(name, ARLONGNAMES1, sizeof(ARLONGNAMES1) - 1) == 0 ||
+-	strncmp(name, ARLONGNAMES2, sizeof(ARLONGNAMES2) - 1) == 0) {
++    if (strncmp(*name, ARLONGNAMES1, sizeof(ARLONGNAMES1) - 1) == 0 ||
++	strncmp(*name, ARLONGNAMES2, sizeof(ARLONGNAMES2) - 1) == 0) {
+ 
+ 	if (ar->fnametab != NULL) {
+ 	    if (DEBUG(ARCH)) {
+@@ -793,30 +794,30 @@
+ 	return 0;
+     }
+ 
+-    if (name[1] == ' ' || name[1] == '\0')
++    if ((*name)[1] == ' ' || (*name)[1] == '\0')
+ 	return 2;
+ 
+-    entry = (size_t) strtol(&name[1], &eptr, 0);
+-    if ((*eptr != ' ' && *eptr != '\0') || eptr == &name[1]) {
++    entry = (size_t) strtol(&(*name)[1], &eptr, 0);
++    if ((*eptr != ' ' && *eptr != '\0') || eptr == &(*name)[1]) {
+ 	if (DEBUG(ARCH)) {
+-	    printf("Could not parse SVR4 name %s\n", name);
++	    printf("Could not parse SVR4 name %s\n", *name);
+ 	}
+ 	return 2;
+     }
+     if (entry >= ar->fnamesize) {
+ 	if (DEBUG(ARCH)) {
+ 	    printf("SVR4 entry offset %s is greater than %lu\n",
+-		   name, (u_long)ar->fnamesize);
++		   *name, (u_long)ar->fnamesize);
+ 	}
+ 	return 2;
+     }
+ 
+     if (DEBUG(ARCH)) {
+-	printf("Replaced %s with %s\n", name, &ar->fnametab[entry]);
++	printf("Replaced %s with %s\n", *name, &ar->fnametab[entry]);
+     }
+ 
+-    (void) strncpy(name, &ar->fnametab[entry], MAXPATHLEN);
+-    name[MAXPATHLEN] = '\0';
++		free(*name);
++		*name = estrdup(&ar->fnametab[entry]);
+     return 1;
+ }
+ #endif
+@@ -926,12 +927,9 @@
+ 		isdigit((unsigned char)arhPtr->ar_name[sizeof(AR_EFMT1) - 1])) {
+ 
+ 		unsigned int elen = atoi(&arhPtr->ar_name[sizeof(AR_EFMT1)-1]);
+-		char ename[MAXPATHLEN];
++		char *ename = NULL;
+ 
+-		if (elen > MAXPATHLEN) {
+-			fclose (arch);
+-			return NULL;
+-		}
++		ename = emalloc(elen+1);
+ 		if (fread (ename, elen, 1, arch) != 1) {
+ 			fclose (arch);
+ 			return NULL;
+@@ -945,6 +943,8 @@
+ 			fseek (arch, -sizeof(struct ar_hdr) - elen, SEEK_CUR);
+ 			return (arch);
+ 		}
++		/* time to free ename */
++		free(ename);
+ 		fseek (arch, -elen, SEEK_CUR);
+ 		goto skip;
+ 	} else
+--- pmake-1.111.orig/buf.c
++++ pmake-1.111/buf.c
+@@ -192,7 +192,8 @@
+ {
+ 
+     if (numBytesPtr != (int *)NULL) {
+-	*numBytesPtr = bp->inPtr - bp->outPtr;
++	intptr_t num = bp->inPtr - bp->outPtr;
++	*numBytesPtr = num;
+     }
+ 
+     return (bp->outPtr);
+--- pmake-1.111.orig/compat.c
++++ pmake-1.111/compat.c
+@@ -130,7 +130,7 @@
+ 
+     Shell_Init();		/* setup default shell */
+     
+-    for (cp = "#=|^(){};&<>*?[]:$`\\\n"; *cp != '\0'; cp++) {
++    for (cp = "~#=|^(){};&<>*?[]:$`\\\n"; *cp != '\0'; cp++) {
+ 	meta[(unsigned char) *cp] = 1;
+     }
+     /*
+@@ -498,7 +498,7 @@
+ 	    }
+ 	    goto cohorts;
+ 	} else if (DEBUG(MAKE)) {
+-	    printf("out-of-date.\n");
++	    printf("out-of-date\n");
+ 	}
+ 
+ 	/*
+--- pmake-1.111.orig/job.c
++++ pmake-1.111/job.c
+@@ -2162,7 +2162,8 @@
+ 	    (void) fprintf(stdout, "Remaking `%s'\n", gn->name);
+   	    (void) fflush(stdout);
+ 	    (void) strcpy(job->outFile, TMPPAT);
+-	    job->outFd = mkstemp(job->outFile);
++	    if ((job->outFd = mkstemp(job->outFile)) == -1)
++	       Punt("Cannot create temp file: %s", strerror(errno));
+ 	    (void) fcntl(job->outFd, F_SETFD, 1);
+ 	}
+     }
+--- pmake-1.111.orig/main.c
++++ pmake-1.111/main.c
+@@ -825,7 +825,10 @@
+ 	 * in a different format).
+ 	 */
+ #ifdef POSIX
+-	Main_ParseArgLine(getenv("MAKEFLAGS"));
++	/*
++	 * If we are called by GNU make, do not read MAKEFLAGS.
++	 */
++	Main_ParseArgLine(getenv(getenv("MAKELEVEL") ? "MAKE" : "MAKEFLAGS"));
+ #else
+ 	Main_ParseArgLine(getenv("MAKE"));
+ #endif
+@@ -1149,6 +1152,9 @@
+ 	}
+ 	free(path);
+ 	return(TRUE);
++	/* `path' is not freed before return because its
++	 * pointer is stored somewhere else
++	 */
+ }
+ 
+ 
+--- pmake-1.111.orig/make.1
++++ pmake-1.111/make.1
+@@ -33,7 +33,7 @@
+ .Dt MAKE 1
+ .Os
+ .Sh NAME
+-.Nm make
++.Nm pmake
+ .Nd maintain program dependencies
+ .Sh SYNOPSIS
+ .Nm
+@@ -1233,7 +1233,7 @@
+ .It Ic defined
+ Takes a variable name as an argument and evaluates to true if the variable
+ has been defined.
+-.It Ic make
++.It Ic pmake
+ Takes a target name as an argument and evaluates to true if the target
+ was specified as part of
+ .Nm Ns 's
+@@ -1602,7 +1602,6 @@
+ .Sh SEE ALSO
+ .Xr mkdep 1
+ .Sh HISTORY
+-A
+-.Nm
++A make
+ command appeared in
+ .At v7 .
+--- pmake-1.111.orig/var.c
++++ pmake-1.111/var.c
+@@ -124,6 +124,7 @@
+  */
+ 
+ #ifndef NO_REGEX
++#include    <stdio.h>
+ #include    <sys/types.h>
+ #include    <regex.h>
+ #endif
diff --git a/package/pmake/pmake-130_maxpathlen.patch b/package/pmake/pmake-130_maxpathlen.patch
new file mode 100644
index 0000000..fa8fd5f
--- /dev/null
+++ b/package/pmake/pmake-130_maxpathlen.patch
@@ -0,0 +1,39 @@
+Patch vampirised from Debian's package pmake_1.111-3.2:
+    http://snapshot.debian.org/archive/debian/20120601T033558Z/pool/main/p/pmake/
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+diff -u pmake-1.111/main.c pmake-1.111/main.c
+--- pmake-1.111/main.c
++++ pmake-1.111/main.c
+@@ -636,6 +636,17 @@
+ 	char found_path[MAXPATHLEN + 1];	/* for searching for sys.mk */
+ 	struct timeval rightnow;		/* to initialize random seed */
+ 
++#ifdef MAXPATHLEN_UNDEFINED
++	if (sysconf(_PC_PATH_MAX) > MAXPATHLEN) {
++		fprintf(stderr, "This operating system runs with "
++		    "sysconf(_PC_PATH_MAX) > MAXPATHLEN\n(%ld > %ld). "
++		    "Please change the guesstimated value at the bottom\n"
++		    "of 'make.h' and recompile, or reduce the actual "
++		    "value.\n", sysconf(_PC_PATH_MAX), (long)MAXPATHLEN);
++		return (255);
++	}
++#endif
++
+ 	/*
+ 	 * Set the seed to produce a different random sequences
+ 	 * on each program execution.
+--- pmake-1.111.orig/make.h
++++ pmake-1.111/make.h
+@@ -476,4 +476,10 @@
+ #define MAX(a, b) ((a > b) ? a : b)
+ #endif
+ 
++/* maybe Debian GNU/HURD */
++#ifndef MAXPATHLEN
++#define MAXPATHLEN	4096	/* some sensible value */
++#define MAXPATHLEN_UNDEFINED	/* triggers check in main.c */
++#endif
++
+ #endif /* _MAKE_H_ */
diff --git a/package/pmake/pmake-140_multiarch.patch b/package/pmake/pmake-140_multiarch.patch
new file mode 100644
index 0000000..aef8fd3
--- /dev/null
+++ b/package/pmake/pmake-140_multiarch.patch
@@ -0,0 +1,354 @@
+Patch vampirised from Debian's package pmake_1.111-3.2:
+    http://snapshot.debian.org/archive/debian/20120601T033558Z/pool/main/p/pmake/
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+---
+ Makefile.boot  |    5 +-
+ arch.c         |    9 ---
+ main.c         |   31 ++++++++++++
+ make.1         |    1 
+ mk/bsd.lib.mk  |    8 +++
+ mk/bsd.own.mk  |    2 
+ mk/bsd.prog.mk |  136 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ 7 files changed, 179 insertions(+), 13 deletions(-)
+
+--- a/arch.c
++++ b/arch.c
+@@ -146,15 +146,6 @@ __RCSID("$NetBSD: arch.c,v 1.44 2005/02/
+ #include    "dir.h"
+ #include    "config.h"
+ 
+-#ifdef TARGET_MACHINE
+-#undef MAKE_MACHINE
+-#define MAKE_MACHINE TARGET_MACHINE
+-#endif
+-#ifdef TARGET_MACHINE_ARCH
+-#undef MAKE_MACHINE_ARCH
+-#define MAKE_MACHINE_ARCH TARGET_MACHINE_ARCH
+-#endif
+-
+ static Lst	  archives;   /* Lst of archives we've already examined */
+ 
+ typedef struct Arch {
+--- a/main.c
++++ b/main.c
+@@ -146,6 +146,19 @@ __RCSID("$NetBSD: main.c,v 1.111 2005/06
+ #define	DEFMAXLOCAL DEFMAXJOBS
+ #endif	/* DEFMAXLOCAL */
+ 
++#ifdef TARGET_MACHINE
++#undef MAKE_MACHINE
++#define MAKE_MACHINE TARGET_MACHINE
++#endif
++#ifdef TARGET_MACHINE_ARCH
++#undef MAKE_MACHINE_ARCH
++#define MAKE_MACHINE_ARCH TARGET_MACHINE_ARCH
++#endif
++#ifdef TARGET_MACHINE_MULTIARCH
++#undef MAKE_MACHINE_MULTIARCH
++#define MAKE_MACHINE_MULTIARCH TARGET_MACHINE_MULTIARCH
++#endif
++
+ Lst			create;		/* Targets to be made */
+ time_t			now;		/* Time at start of make */
+ GNode			*DEFAULT;	/* .DEFAULT node */
+@@ -628,6 +641,7 @@ main(int argc, char **argv)
+ 	char mdpath[MAXPATHLEN];
+     	char *machine = getenv("MACHINE");
+ 	const char *machine_arch = getenv("MACHINE_ARCH");
++	const char *machine_multiarch = getenv("MACHINE_MULTIARCH");
+ 	char *syspath = getenv("MAKESYSPATH");
+ 	Lst sysMkPath;			/* Path of sys.mk */
+ 	char *cp = NULL, *start;
+@@ -711,8 +725,8 @@ main(int argc, char **argv)
+ 	 * so we can share an executable for similar machines.
+ 	 * (i.e. m68k: amiga hp300, mac68k, sun3, ...)
+ 	 *
+-	 * Note that both MACHINE and MACHINE_ARCH are decided at
+-	 * run-time.
++	 * Note that all of MACHINE, MACHINE_ARCH and MACHINE_MULTIARCH
++	 * are decided at run-time.
+ 	 */
+ 	if (!machine) {
+ #ifdef MAKE_NATIVE
+@@ -745,6 +759,18 @@ main(int argc, char **argv)
+ #endif
+ 	}
+ 
++	if (!machine_multiarch) {
++#ifndef MACHINE_MULTIARCH
++#ifdef MAKE_MACHINE_MULTIARCH
++	    machine_multiarch = MAKE_MACHINE_MULTIARCH;
++#else
++	    machine_multiarch = "unknown-unknown-unknown";
++#endif
++#else
++	    machine_multiarch = MACHINE_MULTIARCH;
++#endif
++	}
++
+ 	/*
+ 	 * Just in case MAKEOBJDIR wants us to do something tricky.
+ 	 */
+@@ -753,6 +779,7 @@ main(int argc, char **argv)
+ 	Var_Set(".CURDIR", curdir, VAR_GLOBAL, 0);
+ 	Var_Set("MACHINE", machine, VAR_GLOBAL, 0);
+ 	Var_Set("MACHINE_ARCH", machine_arch, VAR_GLOBAL, 0);
++	Var_Set("MACHINE_MULTIARCH", machine_multiarch, VAR_GLOBAL, 0);
+ #ifdef MAKE_VERSION
+ 	Var_Set("MAKE_VERSION", MAKE_VERSION, VAR_GLOBAL, 0);
+ #endif
+--- a/make.1
++++ b/make.1
+@@ -1569,6 +1569,7 @@ If no sources are specified, any previou
+ uses the following environment variables, if they exist:
+ .Ev MACHINE ,
+ .Ev MACHINE_ARCH ,
++.Ev MACHINE_MULTIARCH ,
+ .Ev MAKE ,
+ .Ev MAKEFLAGS ,
+ .Ev MAKEOBJDIR ,
+--- a/Makefile.boot
++++ b/Makefile.boot
+@@ -4,7 +4,8 @@
+ #
+ # You only want to use this if you aren't running NetBSD.
+ #
+-# modify MACHINE and MACHINE_ARCH as appropriate for your target architecture
++# modify MACHINE, MACHINE_ARCH and MACHINE_MULTIARCH as appropriate for
++# your target architecture
+ #
+ CC=gcc -O -g
+ 
+@@ -13,11 +14,13 @@ CC=gcc -O -g
+ 
+ MACHINE=i386
+ MACHINE_ARCH=i386
++MACHINE_MULTIARCH=i386-linux-gnu
+ # tested on HP-UX 10.20
+ #MAKE_MACHINE=hp700
+ #MAKE_MACHINE_ARCH=hppa
+ CFLAGS= -DTARGET_MACHINE=\"${MACHINE}\" \
+ 	-DTARGET_MACHINE_ARCH=\"${MACHINE_ARCH}\" \
++	-DTARGET_MACHINE_MULTIARCH=\"${MACHINE_MULTIARCH}\" \
+ 	-DMAKE_MACHINE=\"${MACHINE}\"
+ LIBS=
+ 
+--- a/mk/bsd.prog.mk
++++ b/mk/bsd.prog.mk
+@@ -19,8 +19,16 @@ CFLAGS+=	${COPTS}
+ 
+ # ELF platforms depend on crtbegin.o and crtend.o
+ .if ${OBJECT_FMT} == "ELF"
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/crtbegin.o)
++LIBCRTBEGIN?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/crtbegin.o
++.else
+ LIBCRTBEGIN?=	${DESTDIR}/usr/lib/crtbegin.o
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/crtend.o)
++LIBCRTEND?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/crtend.o
++.else
+ LIBCRTEND?=	${DESTDIR}/usr/lib/crtend.o
++.endif
+ .else
+ LIBCRTBEGIN?=
+ LIBCRTEND?=
+@@ -28,38 +36,166 @@ LIBCRTEND?=
+ 
+ LIBCRT0?=	
+ 
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libbz2.a)
++LIBBZ2?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libbz2.a
++.else
+ LIBBZ2?=	${DESTDIR}/usr/lib/libbz2.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libc.a)
++LIBC?=		${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libc.a
++.else
+ LIBC?=		${DESTDIR}/usr/lib/libc.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libc_pic.a)
++LIBC_PIC?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libc_pic.a
++.else
+ LIBC_PIC?=	${DESTDIR}/usr/lib/libc_pic.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libcompat.a)
++LIBCOMPAT?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libcompat.a
++.else
+ LIBCOMPAT?=	${DESTDIR}/usr/lib/libcompat.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libcrypt.a)
++LIBCRYPT?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libcrypt.a
++.else
+ LIBCRYPT?=	${DESTDIR}/usr/lib/libcrypt.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libcurses.a)
++LIBCURSES?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libcurses.a
++.else
+ LIBCURSES?=	${DESTDIR}/usr/lib/libcurses.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libdbm.a)
++LIBDBM?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libdbm.a
++.else
+ LIBDBM?=	${DESTDIR}/usr/lib/libdbm.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libdes.a)
++LIBDES?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libdes.a
++.else
+ LIBDES?=	${DESTDIR}/usr/lib/libdes.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libedit.a)
++LIBEDIT?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libedit.a
++.else
+ LIBEDIT?=	${DESTDIR}/usr/lib/libedit.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libgcc.a)
++LIBGCC?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libgcc.a
++.else
+ LIBGCC?=	${DESTDIR}/usr/lib/libgcc.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libgnumalloc.a)
++LIBGNUMALLOC?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libgnumalloc.a
++.else
+ LIBGNUMALLOC?=	${DESTDIR}/usr/lib/libgnumalloc.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libkdb.a)
++LIBKDB?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libkdb.a
++.else
+ LIBKDB?=	${DESTDIR}/usr/lib/libkdb.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libkrb.a)
++LIBKRB?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libkrb.a
++.else
+ LIBKRB?=	${DESTDIR}/usr/lib/libkrb.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libkvm.a)
++LIBKVM?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libkvm.a
++.else
+ LIBKVM?=	${DESTDIR}/usr/lib/libkvm.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libl.a)
++LIBL?=		${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libl.a
++.else
+ LIBL?=		${DESTDIR}/usr/lib/libl.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libm.a)
++LIBM?=		${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libm.a
++.else
+ LIBM?=		${DESTDIR}/usr/lib/libm.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libmp.a)
++LIBMP?=		${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libmp.a
++.else
+ LIBMP?=		${DESTDIR}/usr/lib/libmp.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libntp.a)
++LIBNTP?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libntp.a
++.else
+ LIBNTP?=	${DESTDIR}/usr/lib/libntp.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libobjc.a)
++LIBOBJC?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libobjc.a
++.else
+ LIBOBJC?=	${DESTDIR}/usr/lib/libobjc.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libpc.a)
++LIBPC?=		${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libpc.a
++.else
+ LIBPC?=		${DESTDIR}/usr/lib/libpc.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libpcap.a)
++LIBPCAP?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libpcap.a
++.else
+ LIBPCAP?=	${DESTDIR}/usr/lib/libpcap.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libplot.a)
++LIBPLOT?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libplot.a
++.else
+ LIBPLOT?=	${DESTDIR}/usr/lib/libplot.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libposix.a)
++LIBPOSIX?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libposix.a
++.else
+ LIBPOSIX?=	${DESTDIR}/usr/lib/libposix.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libresolv.a)
++LIBRESOLV?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libresolv.a
++.else
+ LIBRESOLV?=	${DESTDIR}/usr/lib/libresolv.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/librpcsvc.a)
++LIBRPCSVC?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/librpcsvc.a
++.else
+ LIBRPCSVC?=	${DESTDIR}/usr/lib/librpcsvc.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libskey.a)
++LIBSKEY?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libskey.a
++.else
+ LIBSKEY?=	${DESTDIR}/usr/lib/libskey.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libtermcap.a)
++LIBTERMCAP?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libtermcap.a
++.else
+ LIBTERMCAP?=	${DESTDIR}/usr/lib/libtermcap.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libtelnet.a)
++LIBTELNET?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libtelnet.a
++.else
+ LIBTELNET?=	${DESTDIR}/usr/lib/libtelnet.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libutil.a)
++LIBUTIL?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libutil.a
++.else
+ LIBUTIL?=	${DESTDIR}/usr/lib/libutil.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libwrap.a)
++LIBWRAP?=	${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libwrap.a
++.else
+ LIBWRAP?=	${DESTDIR}/usr/lib/libwrap.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/liby.a)
++LIBY?=		${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/liby.a
++.else
+ LIBY?=		${DESTDIR}/usr/lib/liby.a
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libz.a)
++LIBZ?=		${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/libz.a
++.else
+ LIBZ?=		${DESTDIR}/usr/lib/libz.a
++.endif
+ 
+ .if defined(SHAREDSTRINGS)
+ CLEANFILES+=strings
+--- a/mk/bsd.lib.mk
++++ b/mk/bsd.lib.mk
+@@ -115,9 +115,17 @@ APICFLAGS?= -k
+ .if ${OBJECT_FMT} == "ELF"
+ SHLIB_SOVERSION=${SHLIB_MAJOR}
+ SHLIB_SHFLAGS=-soname lib${LIB}.so.${SHLIB_SOVERSION}
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/crtbeginS.o)
++SHLIB_LDSTARTFILE= ${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/crtbeginS.o
++.else
+ SHLIB_LDSTARTFILE= ${DESTDIR}/usr/lib/crtbeginS.o
++.endif
++.if exists(${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/crtendS.o)
++SHLIB_LDENDFILE= ${DESTDIR}/usr/lib/${MACHINE_MULTIARCH}/crtendS.o
++.else
+ SHLIB_LDENDFILE= ${DESTDIR}/usr/lib/crtendS.o
+ .endif
++.endif
+ 
+ CFLAGS+=	${COPTS}
+ 
+--- a/mk/bsd.own.mk
++++ b/mk/bsd.own.mk
+@@ -42,7 +42,7 @@ INFOGRP?=	root
+ INFOOWN?=	root
+ INFOMODE?=	${NONBINMODE}
+ 
+-LIBDIR?=	/usr/lib
++LIBDIR?=	/usr/lib/${MACHINE_MULTIARCH}
+ LINTLIBDIR?=	/usr/libdata/lint
+ LIBGRP?=	${BINGRP}
+ LIBOWN?=	${BINOWN}
diff --git a/package/pmake/pmake-150_mktemp.patch b/package/pmake/pmake-150_mktemp.patch
new file mode 100644
index 0000000..5ccb2a8
--- /dev/null
+++ b/package/pmake/pmake-150_mktemp.patch
@@ -0,0 +1,31 @@
+Patch vampirised from Debian's package pmake_1.111-3.2:
+    http://snapshot.debian.org/archive/debian/20120601T033558Z/pool/main/p/pmake/
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+Index: pmake-1.111/mk/bsd.lib.mk
+===================================================================
+--- pmake-1.111.orig/mk/bsd.lib.mk	2011-05-29 15:38:35.843998781 +0200
++++ pmake-1.111/mk/bsd.lib.mk	2011-05-29 15:39:16.091998780 +0200
+@@ -299,7 +299,7 @@
+ 
+ .if defined(SRCS)
+ afterdepend: .depend
+-	@(TMP=/tmp/_depend$$$$; \
++	@(TMP=`mktemp -t _dependXXXXXXXXXX` || exit $$?; \
+ 	    sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.po \1.so \1.ln:/' \
+ 	      < .depend > $$TMP; \
+ 	    mv $$TMP .depend)
+Index: pmake-1.111/mk/bsd.prog.mk
+===================================================================
+--- pmake-1.111.orig/mk/bsd.prog.mk	2011-05-29 15:39:21.999998780 +0200
++++ pmake-1.111/mk/bsd.prog.mk	2011-05-29 15:39:30.923998779 +0200
+@@ -260,7 +260,7 @@
+ 
+ .if defined(SRCS)
+ afterdepend: .depend
+-	@(TMP=/tmp/_depend$$$$; \
++	@(TMP=`mktemp -t _dependXXXXXXXXXX` || exit $$?; \
+ 	    sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.ln:/' \
+ 	      < .depend > $$TMP; \
+ 	    mv $$TMP .depend)
diff --git a/package/pmake/pmake.mk b/package/pmake/pmake.mk
new file mode 100644
index 0000000..efd36f5
--- /dev/null
+++ b/package/pmake/pmake.mk
@@ -0,0 +1,46 @@
+#############################################################
+#
+# pmake
+#
+##############################################################
+
+PMAKE_VERSION       = 1.111
+PMAKE_SOURCE        = pmake_$(PMAKE_VERSION).orig.tar.gz
+PMAKE_SITE          = http://snapshot.debian.org/archive/debian/20120601T033558Z/pool/main/p/pmake
+PMAKE_LICENSE       = BSD-3c BSD-4c
+# No license file. License texts are spread in the boilerplates
+# of each individual source files; some are BSD-3c, some BSD-4c.
+
+# CFLAGS vampirised from Debian's rules, adapted to buildroot variables
+HOST_PMAKE_CFLAGS = -O2 -g -Wall -D__COPYRIGHT\(x\)= -D__RCSID\(x\)= -I.        \
+                -DMACHINE=\\\"buildroot\\\"                                 \
+                -DMACHINE_ARCH=\\\"$(ARCH)\\\" -DMACHINE_MULTIARCH=\\\"\\\" \
+                -DHAVE_SETENV -DHAVE_STRERROR -DHAVE_STRDUP -DHAVE_STRFTIME \
+                -DHAVE_VSNPRINTF -D_GNU_SOURCE -Wno-unused
+
+define HOST_PMAKE_BUILD_CMDS
+	$(MAKE) -C $(@D) -f Makefile.boot CFLAGS="$(HOST_PMAKE_CFLAGS)"
+endef
+
+# The generated file is named bmake, but we want pmake; but:
+#  - pmake uses support files (in  mk/)
+#  - it's not possible to tell pmake, at build-time, where to expect
+#    these support files, and pmake expects them in /usr/share/mk/
+#  - but pmake has an option to override that search path at runtime
+#  - so we install bmake as bmake
+#  - and we install a wraper named pmake that calls pmake with the
+#    appropriate search path
+define HOST_PMAKE_INSTALL_CMDS
+	$(INSTALL) -m 0755 $(@D)/bmake $(HOST_DIR)/usr/bin/bmake
+	$(INSTALL) -d -m 0755 $(HOST_DIR)/usr/share/pmake/mk
+	for mk in $(@D)/mk/*; do                                        \
+	    $(INSTALL) -m 0644 $${mk} $(HOST_DIR)/usr/share/pmake/mk;   \
+	done
+	printf '#!/bin/sh\nexec %s -m %s $$@\n' \
+	       $(HOST_DIR)/usr/bin/bmake        \
+	       $(HOST_DIR)/usr/share/pmake/mk   \
+	       >$(HOST_DIR)/usr/bin/pmake
+	chmod 0755 $(HOST_DIR)/usr/bin/pmake
+endef
+
+$(eval $(host-generic-package))
-- 
1.7.2.5

[Buildroot] [PATCH 16/20] package/libbsd: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 package/Config.in        |    1 +
 package/libbsd/Config.in |   10 ++++++++++
 package/libbsd/libbsd.mk |   21 +++++++++++++++++++++
 3 files changed, 32 insertions(+), 0 deletions(-)
 create mode 100644 package/libbsd/Config.in
 create mode 100644 package/libbsd/libbsd.mk

diff --git a/package/Config.in b/package/Config.in
index c90fcd8..e016378 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -508,6 +508,7 @@ source "package/libargtable2/Config.in"
 source "package/argp-standalone/Config.in"
 source "package/boost/Config.in"
 source "package/libatomic_ops/Config.in"
+source "package/libbsd/Config.in"
 source "package/libcap/Config.in"
 source "package/libcap-ng/Config.in"
 source "package/libdaemon/Config.in"
diff --git a/package/libbsd/Config.in b/package/libbsd/Config.in
new file mode 100644
index 0000000..7f2b55a
--- /dev/null
+++ b/package/libbsd/Config.in
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_LIBBSD
+	bool "libbsd"
+	help
+	  This library provides useful functions commonly found on BSD
+	  systems, and lacking on others like GNU systems, thus making
+	  it easier to port projects with strong BSD origins, without
+	  needing to embed the same code over and over again on each
+	  project.
+	  
+	  http://libbsd.freedesktop.org/
diff --git a/package/libbsd/libbsd.mk b/package/libbsd/libbsd.mk
new file mode 100644
index 0000000..3af1002
--- /dev/null
+++ b/package/libbsd/libbsd.mk
@@ -0,0 +1,21 @@
+#############################################################
+#
+# libbsd
+#
+#############################################################
+
+LIBBSD_VERSION         = 0.4.2
+LIBBSD_SOURCE          = libbsd-$(LIBBSD_VERSION).tar.gz
+LIBBSD_SITE            = http://libbsd.freedesktop.org/releases
+LIBBSD_LICENSE         = BSD-3c MIT
+LIBBSD_LICENSE_FILES   = LICENSE
+
+# man-pages are BSD-4c, so that license only matters
+# if doc is kept in the target rootfs
+ifeq ($(BR2_HAVE_DOCUMENTATION),y)
+LIBBSD_LICENSE        += (libraries), BSD-4c (documentation)
+endif
+
+LIBBSD_INSTALL_STAGING = YES
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 17/20] package/libedit2: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
 package/Config.in                                  |    1 +
 package/libedit2/Config.in                         |    9 +++
 package/libedit2/libedit2-01-Makefile.patch        |   25 +++++++
 package/libedit2/libedit2-02-el.c-issetugid.patch  |   24 ++++++
 package/libedit2/libedit2-03-el.c-MAXPATHLEN.patch |   40 +++++++++++
 .../libedit2/libedit2-04-readline.h-stdio.patch    |   17 +++++
 .../libedit2/libedit2-08-readline-history.h.patch  |   20 +++++
 .../libedit2/libedit2-10-define_SIZE_T_MAX.patch   |   18 +++++
 .../libedit2/libedit2-12-libedit-Makefile.patch    |   54 ++++++++++++++
 package/libedit2/libedit2-20-fortify.patch         |   23 ++++++
 package/libedit2/libedit2.mk                       |   75 ++++++++++++++++++++
 package/libedit2/libedit2.pc                       |   13 ++++
 12 files changed, 319 insertions(+), 0 deletions(-)
 create mode 100644 package/libedit2/Config.in
 create mode 100644 package/libedit2/libedit2-01-Makefile.patch
 create mode 100644 package/libedit2/libedit2-02-el.c-issetugid.patch
 create mode 100644 package/libedit2/libedit2-03-el.c-MAXPATHLEN.patch
 create mode 100644 package/libedit2/libedit2-04-readline.h-stdio.patch
 create mode 100644 package/libedit2/libedit2-08-readline-history.h.patch
 create mode 100644 package/libedit2/libedit2-10-define_SIZE_T_MAX.patch
 create mode 100644 package/libedit2/libedit2-12-libedit-Makefile.patch
 create mode 100644 package/libedit2/libedit2-20-fortify.patch
 create mode 100644 package/libedit2/libedit2.mk
 create mode 100644 package/libedit2/libedit2.pc

diff --git a/package/Config.in b/package/Config.in
index e016378..47c01db 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -538,6 +538,7 @@ endmenu
 menu "Text and terminal handling"
 source "package/enchant/Config.in"
 source "package/icu/Config.in"
+source "package/libedit2/Config.in"
 source "package/libiconv/Config.in"
 source "package/linenoise/Config.in"
 source "package/ncurses/Config.in"
diff --git a/package/libedit2/Config.in b/package/libedit2/Config.in
new file mode 100644
index 0000000..1e7b95d
--- /dev/null
+++ b/package/libedit2/Config.in
@@ -0,0 +1,9 @@
+config BR2_PACKAGE_LIBEDIT2
+	bool "libedit2"
+	select BR2_PACKAGE_LIBBSD
+	select BR2_PACKAGE_NCURSES
+	help
+	  The editline library (from BSD) provides generic line editing
+	  and history functions. It slightly resembles GNU readline.
+	  
+	  http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-5-0/src/lib/libedit/
diff --git a/package/libedit2/libedit2-01-Makefile.patch b/package/libedit2/libedit2-01-Makefile.patch
new file mode 100644
index 0000000..91645e4
--- /dev/null
+++ b/package/libedit2/libedit2-01-Makefile.patch
@@ -0,0 +1,25 @@
+ 01-Makefile.diff by Neal H Walfield <neal@cs.uml.edu> and
+ Gergely Nagy <algernon@debian.org>
+
+ Add the necessary includes and other things to the libedit
+ Makefile, so it will compile on GNU systems, with our supplied
+ glue code
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/Makefile
++++ b/libedit/Makefile
+@@ -1,6 +1,13 @@
+ #	$NetBSD: Makefile,v 1.36 2007/05/28 12:06:18 tls Exp $
+ #	@(#)Makefile	8.1 (Berkeley) 6/4/93
+ 
++OS!=	sh -c "case `uname -s` in GNU|GNU/*) echo GNU ;; *) uname -s ;; esac"
++
++.if ${OS} == GNU || ${OS} == Linux
++CFLAGS += -include bsd/bsd.h
++MKLINT=no
++.endif
++
+ USE_SHLIBDIR=	yes
+ 
+ WARNS=	3
diff --git a/package/libedit2/libedit2-02-el.c-issetugid.patch b/package/libedit2/libedit2-02-el.c-issetugid.patch
new file mode 100644
index 0000000..b060fa4
--- /dev/null
+++ b/package/libedit2/libedit2-02-el.c-issetugid.patch
@@ -0,0 +1,24 @@
+ 02-el.c-issetugid.diff by Gergely Nagy <algernon@debian.org>
+
+ issetugid(2) is not implemented on GNU systems, so #ifdef it out
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/el.c	2008-04-06 02:53:28.000000000 +1100
++++ b/libedit/el.c	2009-06-23 08:51:48.000000000 +1000
+@@ -479,12 +479,14 @@ el_source(EditLine *el, const char *fnam
+ 
+ 	fp = NULL;
+ 	if (fname == NULL) {
+-#ifdef HAVE_ISSETUGID
++#if 1
+ 		static const char elpath[] = "/.editrc";
+ 		char path[MAXPATHLEN];
+ 
++#ifndef __GLIBC__
+ 		if (issetugid())
+ 			return (-1);
++#endif
+ 		if ((ptr = getenv("HOME")) == NULL)
+ 			return (-1);
+ 		if (strlcpy(path, ptr, sizeof(path)) >= sizeof(path))
diff --git a/package/libedit2/libedit2-03-el.c-MAXPATHLEN.patch b/package/libedit2/libedit2-03-el.c-MAXPATHLEN.patch
new file mode 100644
index 0000000..aadd36a
--- /dev/null
+++ b/package/libedit2/libedit2-03-el.c-MAXPATHLEN.patch
@@ -0,0 +1,40 @@
+ 03-el.c-MAXPATHLEN.diff by Gergely Nagy <algernon@debian.org>
+
+ on systems without MAXPATHLEN, allocate memory dynamically
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/el.c	2009-06-23 08:57:04.000000000 +1000
++++ b/libedit/el.c	2009-06-23 08:57:30.000000000 +1000
+@@ -481,7 +481,11 @@ el_source(EditLine *el, const char *fnam
+ 	if (fname == NULL) {
+ #if 1
+ 		static const char elpath[] = "/.editrc";
++#ifdef MAXPATHLEN
+ 		char path[MAXPATHLEN];
++#else
++		char *path;
++#endif
+ 
+ #ifndef __GLIBC__
+ 		if (issetugid())
+@@ -489,10 +493,19 @@ el_source(EditLine *el, const char *fnam
+ #endif
+ 		if ((ptr = getenv("HOME")) == NULL)
+ 			return (-1);
++#ifndef MAXPATHLEN
++                path = (char *)malloc(strlen(ptr) + strlen(elpath) + 10);
++		if (path == NULL)
++			return (-1);
++		/* Always succeeds, since we have enough memory */
++		strcpy(path, ptr);
++		strcat(path, elpath);
++#else
+ 		if (strlcpy(path, ptr, sizeof(path)) >= sizeof(path))
+ 			return (-1);
+ 		if (strlcat(path, elpath, sizeof(path)) >= sizeof(path))
+ 			return (-1);
++#endif
+ 		fname = path;
+ #else
+ 		/*
diff --git a/package/libedit2/libedit2-04-readline.h-stdio.patch b/package/libedit2/libedit2-04-readline.h-stdio.patch
new file mode 100644
index 0000000..84257b9
--- /dev/null
+++ b/package/libedit2/libedit2-04-readline.h-stdio.patch
@@ -0,0 +1,17 @@
+ 04-readline.h-stdio.diff by Gergely Nagy <algernon@debian.org>
+
+ since readline.h uses types defined in stdio.h, that header should
+ be included
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/readline/readline.h	2008-04-29 16:53:01.000000000 +1000
++++ b/libedit/readline/readline.h	2009-06-23 08:35:58.000000000 +1000
+@@ -31,6 +31,7 @@
+ #ifndef _READLINE_H_
+ #define _READLINE_H_
+ 
++#include <stdio.h>
+ #include <sys/types.h>
+ 
+ /* list of readline stuff supported by editline library's readline wrapper */
diff --git a/package/libedit2/libedit2-08-readline-history.h.patch b/package/libedit2/libedit2-08-readline-history.h.patch
new file mode 100644
index 0000000..f30093f
--- /dev/null
+++ b/package/libedit2/libedit2-08-readline-history.h.patch
@@ -0,0 +1,20 @@
+ 08-readline-history.h.diff by Pawel Wiecek <coven@debian.org>
+ (compatibility with older versions)
+
+ Setting the global variable rl_inhibit_completion to 1 did indeed
+ disable completion, but the invoking key (e.g., <TAB>) was not
+ inserted directly into the input line as it should be.
+ This patch fixes this problem, and also declares rl_inhibit_completion
+ in readline.h for better readline compatibility.
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/readline/Makefile	2003-08-03 19:23:15.000000000 +1000
++++ b/libedit/readline/Makefile	2009-06-23 08:35:58.000000000 +1000
+@@ -10,4 +10,6 @@ INCS=		readline.h
+ INCSDIR=	/usr/include/readline
+ INCSYMLINKS=	readline.h ${INCSDIR}/history.h
+ 
++incinstall:: linksinstall
++
+ .include <bsd.prog.mk>
diff --git a/package/libedit2/libedit2-10-define_SIZE_T_MAX.patch b/package/libedit2/libedit2-10-define_SIZE_T_MAX.patch
new file mode 100644
index 0000000..c8ce262
--- /dev/null
+++ b/package/libedit2/libedit2-10-define_SIZE_T_MAX.patch
@@ -0,0 +1,18 @@
+ 10-define_SIZE_T_MAX.diff by Anibal Monsalve Salazar
+ define SIZE_T_MAX as UINT_MAX in limits.h
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/readline.c	2008-04-29 16:53:01.000000000 +1000
++++ a/libedit/readline.c	2008-06-14 23:54:16.000000000 +1000
+@@ -61,6 +61,10 @@ __RCSID("$NetBSD: readline.c,v 1.75 2008
+ #include "readline/readline.h"
+ #include "filecomplete.h"
+ 
++#ifndef SIZE_T_MAX
++#define SIZE_T_MAX UINT_MAX
++#endif
++
+ void rl_prep_terminal(int);
+ void rl_deprep_terminal(void);
+ 
diff --git a/package/libedit2/libedit2-12-libedit-Makefile.patch b/package/libedit2/libedit2-12-libedit-Makefile.patch
new file mode 100644
index 0000000..3234f33
--- /dev/null
+++ b/package/libedit2/libedit2-12-libedit-Makefile.patch
@@ -0,0 +1,54 @@
+ 12-libedit-Makefile.diff by Anibal Monsalve Salazar
+ without this patch I get the following message:
+ make: ${_MKTARGET_CREATE} expands to empty string
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/Makefile	2007-05-28 22:06:18.000000000 +1000
++++ a/libedit/Makefile	2008-06-15 13:53:50.000000000 +1000
+@@ -59,45 +59,37 @@ CLEANFILES+=	${AHDR} fcns.h help.h fcns.
+ SUBDIR=	readline
+ 
+ vi.h: vi.c makelist Makefile
+-	${_MKTARGET_CREATE}
+ 	${HOST_SH} ${LIBEDITDIR}/makelist -h ${LIBEDITDIR}/vi.c \
+ 	    > ${.TARGET}.tmp && \
+ 	    mv ${.TARGET}.tmp ${.TARGET}
+ 
+ emacs.h: emacs.c makelist Makefile
+-	${_MKTARGET_CREATE}
+ 	${HOST_SH} ${LIBEDITDIR}/makelist -h ${LIBEDITDIR}/emacs.c \
+ 	    > ${.TARGET}.tmp && \
+ 	    mv ${.TARGET}.tmp ${.TARGET}
+ 
+ common.h: common.c makelist Makefile
+-	${_MKTARGET_CREATE}
+ 	${HOST_SH} ${LIBEDITDIR}/makelist -h ${LIBEDITDIR}/common.c \
+ 	    > ${.TARGET}.tmp && \
+ 	    mv ${.TARGET}.tmp ${.TARGET}
+ 
+ fcns.h: ${AHDR} makelist Makefile
+-	${_MKTARGET_CREATE}
+ 	${HOST_SH} ${LIBEDITDIR}/makelist -fh ${AHDR} > ${.TARGET}.tmp && \
+ 	    mv ${.TARGET}.tmp ${.TARGET}
+ 
+ fcns.c: ${AHDR} fcns.h help.h makelist Makefile
+-	${_MKTARGET_CREATE}
+ 	${HOST_SH} ${LIBEDITDIR}/makelist -fc ${AHDR} > ${.TARGET}.tmp && \
+ 	    mv ${.TARGET}.tmp ${.TARGET}
+ 
+ help.c: ${ASRC} makelist Makefile
+-	${_MKTARGET_CREATE}
+ 	${HOST_SH} ${LIBEDITDIR}/makelist -bc ${ASRC} > ${.TARGET}.tmp && \
+ 	    mv ${.TARGET}.tmp ${.TARGET}
+ 
+ help.h: ${ASRC} makelist Makefile
+-	${_MKTARGET_CREATE}
+ 	${HOST_SH} ${LIBEDITDIR}/makelist -bh ${ASRC} > ${.TARGET}.tmp && \
+ 	    mv ${.TARGET}.tmp ${.TARGET}
+ 
+ editline.c: ${OSRCS} makelist Makefile
+-	${_MKTARGET_CREATE}
+ 	${HOST_SH} ${LIBEDITDIR}/makelist -e ${OSRCS:T} > ${.TARGET}.tmp && \
+ 	    mv ${.TARGET}.tmp ${.TARGET}
+ 
diff --git a/package/libedit2/libedit2-20-fortify.patch b/package/libedit2/libedit2-20-fortify.patch
new file mode 100644
index 0000000..0a41ce3
--- /dev/null
+++ b/package/libedit2/libedit2-20-fortify.patch
@@ -0,0 +1,23 @@
+http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=488456
+
+Patch by Kees Cook <kees@outflux.net>
+
+Yann E. MORIN: patch from debian.
+
+--- a/libedit/vi.c	2006-10-22 17:48:13.000000000 +1000
++++ b/libedit/vi.c	2009-06-23 08:35:58.000000000 +1000
+@@ -1012,8 +1012,12 @@ vi_histedit(EditLine *el, int c)
+ 	if (fd < 0)
+ 		return CC_ERROR;
+ 	cp = el->el_line.buffer;
+-	write(fd, cp, el->el_line.lastchar - cp +0u);
+-	write(fd, "\n", 1);
++	if (write(fd, cp, el->el_line.lastchar - cp +0u)<0 ||
++	    write(fd, "\n", 1)<0) {
++		close(fd);
++		unlink(tempfile);
++		return CC_ERROR;
++	}
+ 	pid = fork();
+ 	switch (pid) {
+ 	case -1:
diff --git a/package/libedit2/libedit2.mk b/package/libedit2/libedit2.mk
new file mode 100644
index 0000000..b9ca41e
--- /dev/null
+++ b/package/libedit2/libedit2.mk
@@ -0,0 +1,75 @@
+#############################################################
+#
+# libedit2
+#
+#############################################################
+
+# Note: libedit2 does not have a regular homepage, and it seems
+# there is no place where to download a tarball from. That's
+# why we use the Debian way-back machine.
+LIBEDIT2_VERSION_MAJOR   = 2
+LIBEDIT2_VERSION_MINOR   = 11-20080614
+LIBEDIT2_VERSION         = $(LIBEDIT2_VERSION_MAJOR).$(LIBEDIT2_VERSION_MINOR)
+LIBEDIT2_SOURCE          = libedit_$(LIBEDIT2_VERSION).orig.tar.bz2
+LIBEDIT2_SITE            = http://snapshot.debian.org/archive/debian/20120601T033558Z/pool/main/libe/libedit
+LIBEDIT2_SUBDIR          = libedit
+LIBEDIT2_INSTALL_STAGING = YES
+LIBEDIT2_DEPENDENCIES    = host-pmake libbsd ncurses
+
+define POST_PATCH_PERMISSIONS
+	chmod +x $(@D)/libedit/makelist
+endef
+
+LIBEDIT2_POST_PATCH_HOOKS += POST_PATCH_PERMISSIONS
+
+define LIBEDIT2_FIX_VIS_H_INCLUDE
+	$(SED) 's/^#include <vis.h>$$/#include <bsd\/vis.h>/;' $(@D)/libedit/filecomplete.c
+	$(SED) 's/^#include <vis.h>$$/#include <bsd\/vis.h>/;' $(@D)/libedit/history.c
+	$(SED) 's/^#include <vis.h>$$/#include <bsd\/vis.h>/;' $(@D)/libedit/readline.c
+endef
+LIBEDIT2_POST_PATCH_HOOKS += LIBEDIT2_FIX_VIS_H_INCLUDE
+
+LIBEDIT2_PMAKE_ARGS = MKPROFILE=no MKCATPAGES=no MLINKS= MANPAGES= NOGCCERROR=1         \
+                      SHLIB_SHFLAGS="-Wl,-soname,libedit.so.${LIBEDIT2_VERSION_MAJOR}"  \
+
+define LIBEDIT2_BUILD_CMDS
+	cd $(@D)/$(LIBEDIT2_SUBDIR); \
+	$(TARGET_CONFIGURE_OPTS) LDADD="-lbsd -lcurses" pmake $(LIBEDIT2_PMAKE_ARGS)
+endef
+
+LIBEDIT2_MAN_LINKS = el_init el_end el_reset el_gets el_getc el_push el_parse   \
+                     el_set el_get el_source el_resize el_line el_insertstr     \
+                     el_deletestr history_init history_end history
+
+# $1: DESTDIR to install into
+# Can't use pmake to install, it wants to be root. sigh... :-(
+define LIBEDIT2_INSTALL_CMDS
+	$(INSTALL) -D -m 0644 package/libedit2/libedit2.pc $(1)/usr/lib/pkgconfig/libedit2.pc
+	ln -sf libedit2.pc $(1)/usr/lib/pkgconfig/libedit.pc
+	$(INSTALL) -D -m 0644 $(@D)/libedit/libedit.a $(1)/usr/lib/libedit.a
+	$(INSTALL) -D -m 0644 $(@D)/libedit/libedit_pic.a $(1)/usr/lib/libedit_pic.a
+	$(INSTALL) -D -m 0644 $(@D)/libedit/libedit.so.2.11 $(1)/usr/lib/libedit.so.2.11
+	$(INSTALL) -D -m 0644 $(@D)/libedit/histedit.h $(1)/usr/include/histedit.h
+	ln -sf libedit.so.$(LIBEDIT2_VERSION) $(1)/usr/lib/libedit.so.$(LIBEDIT2_VERSION_MAJOR)
+	ln -sf libedit.so.$(LIBEDIT2_VERSION_MAJOR) $(1)/usr/lib/libedit.so
+	$(INSTALL) -D -m 0644 $(@D)/libedit/readline/readline.h $(1)/usr/include/editline/readline.h
+	if [ "$(BR2_HAVE_DOCUMENTATION)" = "y" ]; then                                              \
+	    $(INSTALL) -v -D -m 0644 $(@D)/libedit/editline.3 $(1)/usr/share/man/man3/editline.3el; \
+	    $(INSTALL) -v -D -m 0644 $(@D)/libedit/editrc.3 $(1)/usr/share/man/man5/editrc.5el;     \
+	    for lnk in $(LIBEDIT2_MAN_LINKS); do                                                    \
+	        ln -sfv editline.3el $(1)/usr/share/man/man3/$${lnk}.3el;                           \
+	    done;                                                                                   \
+	fi
+endef
+#	cd $(@D)/libedit; pmake install incinstall DESTDIR=$(1) $(LIBEDIT2_PMAKE_ARGS)
+#	cd $(@D)/libedit/readline; pmake incinstall DESTDIR=$(1) $(LIBEDIT2_PMAKE_ARGS)
+
+define LIBEDIT2_INSTALL_STAGING_CMDS
+	$(call LIBEDIT2_INSTALL_CMDS,$(STAGING_DIR))
+endef
+
+define LIBEDIT2_INSTALL_TARGET_CMDS
+	$(call LIBEDIT2_INSTALL_CMDS,$(TARGET_DIR))
+endef
+
+$(eval $(generic-package))
diff --git a/package/libedit2/libedit2.pc b/package/libedit2/libedit2.pc
new file mode 100644
index 0000000..47ac871
--- /dev/null
+++ b/package/libedit2/libedit2.pc
@@ -0,0 +1,13 @@
+prefix=/usr
+exec_prefix=${prefix}
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+
+Name: libedit
+Description: Not just a replacement library for libreadline and libhistory.
+Version: 2.11
+Requires: libbsd ncurses
+Requires.private:
+Libs: -L${libdir} -ledit
+Libs.private:
+Cflags: -I${includedir}
-- 
1.7.2.5

[Buildroot] [PATCH 18/20] package/ceph: new package

[Yann E. MORIN]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
 package/Config.in                          |    1 +
 package/ceph/Config.in                     |   18 ++++++++
 package/ceph/ceph-no-envz.patch            |   63 ++++++++++++++++++++++++++++
 package/ceph/ceph-no-getloadavg.patch      |   61 +++++++++++++++++++++++++++
 package/ceph/ceph-no-posix_fallocate.patch |   50 ++++++++++++++++++++++
 package/ceph/ceph.mk                       |   53 +++++++++++++++++++++++
 6 files changed, 246 insertions(+), 0 deletions(-)
 create mode 100644 package/ceph/Config.in
 create mode 100644 package/ceph/ceph-no-envz.patch
 create mode 100644 package/ceph/ceph-no-getloadavg.patch
 create mode 100644 package/ceph/ceph-no-posix_fallocate.patch
 create mode 100644 package/ceph/ceph.mk

diff --git a/package/Config.in b/package/Config.in
index 47c01db..d395326 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -588,6 +588,7 @@ source "package/bind/Config.in"
 source "package/bmon/Config.in"
 source "package/bridge-utils/Config.in"
 source "package/can-utils/Config.in"
+source "package/ceph/Config.in"
 source "package/connman/Config.in"
 source "package/ctorrent/Config.in"
 source "package/conntrack-tools/Config.in"
diff --git a/package/ceph/Config.in b/package/ceph/Config.in
new file mode 100644
index 0000000..db26886
--- /dev/null
+++ b/package/ceph/Config.in
@@ -0,0 +1,18 @@
+comment "ceph requires libnss, and libuuid (from util-linux)"
+	depends on !BR2_PACKAGE_BOOST
+	depends on !BR2_PACKAGE_LIBNSS
+	depends on !BR2_PACKAGE_UTIL_LINUX_LIBUUID
+
+config BR2_PACKAGE_CEPH
+	bool "ceph"
+	depends on BR2_PACKAGE_BOOST
+	depends on BR2_PACKAGE_LIBNSS
+	depends on BR2_PACKAGE_UTIL_LINUX_LIBUUID
+	select BR2_PACKAGE_EXPAT
+	select BR2_PACKAGE_KEYUTILS
+	select BR2_PACKAGE_LIBEDIT2
+	help
+	  Ceph is a distributed object store and file system designed to
+	  provide excellent performance, reliability and scalability.
+	  
+	  http://ceph.com/
diff --git a/package/ceph/ceph-no-envz.patch b/package/ceph/ceph-no-envz.patch
new file mode 100644
index 0000000..c0369ba
--- /dev/null
+++ b/package/ceph/ceph-no-envz.patch
@@ -0,0 +1,63 @@
+tools+base: do not include envz.h on uClibc
+
+uClibc does not have envz, and no envz function is in fact used.
+So, simply do not include it under uClibc.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+--- ceph-0.51.orig/src/tools/common.cc	2012-09-09 00:13:32.128838177 +0200
++++ ceph-0.51/src/tools/common.cc	2012-09-09 00:13:59.432064556 +0200
+@@ -17,9 +17,9 @@
+ #include <string>
+ using namespace std;
+ 
+-#if !defined(DARWIN) && !defined(__FreeBSD__)
++#if !defined(DARWIN) && !defined(__FreeBSD__) && !defined(__UCLIBC__)
+ #include <envz.h>
+-#endif // DARWIN
++#endif // DARWIN || __UCLIBC__
+ 
+ #include <memory>
+ #include <sys/types.h>
+--- ceph-0.51.orig/src/ceph_syn.cc	2012-09-09 00:25:23.302722032 +0200
++++ ceph-0.51/src/ceph_syn.cc	2012-09-09 00:24:39.702892463 +0200
+@@ -31,9 +31,9 @@
+ #include "common/ceph_argparse.h"
+ #include "common/pick_address.h"
+ 
+-#if !defined(DARWIN) && !defined(__FreeBSD__)
++#if !defined(DARWIN) && !defined(__FreeBSD__) && !defined(__UCLIBC__)
+ #include <envz.h>
+-#endif // DARWIN || __FreeBSD__
++#endif // DARWIN || __FreeBSD__ || __UCLIBC__
+ 
+ #include <sys/types.h>
+ #include <sys/stat.h>
+--- ceph-0.51.orig/src/ceph_fuse.cc	2012-09-09 00:43:46.875065556 +0200
++++ ceph-0.51/src/ceph_fuse.cc	2012-09-09 00:44:21.161597834 +0200
+@@ -32,9 +32,9 @@
+ #include "global/global_init.h"
+ #include "common/safe_io.h"
+        
+-#ifndef DARWIN
++#if !defined(DARWIN) && !defined(__UCLIBC__)
+ #include <envz.h>
+-#endif // DARWIN
++#endif // DARWIN || __UCLIBC__
+ 
+ #include <sys/types.h>
+ #include <sys/stat.h>
+--- ceph-0.51.orig/src/testmsgr.cc	2012-09-09 00:44:48.108158886 +0200
++++ ceph-0.51/src/testmsgr.cc	2012-09-09 00:45:18.218040882 +0200
+@@ -28,9 +28,9 @@
+ #include "global/global_init.h"
+ #include "common/ceph_argparse.h"
+ 
+-#ifndef DARWIN
++#if !defined(DARWIN) && !defined(__UCLIBC__)
+ #include <envz.h>
+-#endif // DARWIN
++#endif // DARWIN || __UCLIBC__
+ 
+ #include <sys/types.h>
+ #include <sys/stat.h>
diff --git a/package/ceph/ceph-no-getloadavg.patch b/package/ceph/ceph-no-getloadavg.patch
new file mode 100644
index 0000000..7e887df
--- /dev/null
+++ b/package/ceph/ceph-no-getloadavg.patch
@@ -0,0 +1,61 @@
+OSD: do not use getloadavg(3) on uClibc
+
+getloadavg(3) is not available on uClibc, so do not use it.
+
+getloadavg is used in two places:
+  - once to log the loadavg in the heartbeat logs: we simply remove this;
+  - once to decide whether to schedule scrub (whatever it is) or not: we
+    simply use the existing coin-flip random choice in this case.
+
+The second change will probably have an impact on performances... :-(
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+diff -durN ceph-0.51.orig/src/osd/OSD.cc ceph-0.51/src/osd/OSD.cc
+--- ceph-0.51.orig/src/osd/OSD.cc	2012-08-26 00:58:06.000000000 +0200
++++ ceph-0.51/src/osd/OSD.cc	2012-09-08 23:56:31.396177885 +0200
+@@ -15,6 +15,7 @@
+ #include <fstream>
+ #include <iostream>
+ #include <errno.h>
++#include <features.h> /* For __ULIBC__ */
+ #include <sys/stat.h>
+ #include <signal.h>
+ #include <boost/scoped_ptr.hpp>
+@@ -1942,10 +1943,12 @@
+ {
+   dout(30) << "heartbeat" << dendl;
+ 
++#ifndef __UCLIBC__
+   // get CPU load avg
+   double loadavgs[1];
+   if (getloadavg(loadavgs, 1) == 1)
+     logger->fset(l_osd_loadavg, loadavgs[0]);
++#endif
+ 
+   dout(30) << "heartbeat checking stats" << dendl;
+ 
+@@ -3216,6 +3219,7 @@
+ 
+ bool OSDService::scrub_should_schedule()
+ {
++#ifndef __UCLIBC__
+   double loadavgs[1];
+ 
+   // TODOSAM: is_active should be conveyed to OSDService
+@@ -3249,6 +3253,15 @@
+ 	   << " < max " << g_conf->osd_scrub_load_threshold
+ 	   << " = yes" << dendl;
+   return loadavgs[0] < g_conf->osd_scrub_load_threshold;
++#else // ! defined  __UCLIBC__
++  bool coin_flip = (rand() % 3) == whoami % 3;
++  if (coin_flip) {
++    dout(20) << "scrub_should_schedule randomly yes" << dendl;
++  } else {
++    dout(20) << "scrub_should_schedule randomly backing off" << dendl;
++  }
++  return coin_flip;
++#endif // ! defined  __UCLIBC__
+ }
+ 
+ void OSD::sched_scrub()
diff --git a/package/ceph/ceph-no-posix_fallocate.patch b/package/ceph/ceph-no-posix_fallocate.patch
new file mode 100644
index 0000000..479705d
--- /dev/null
+++ b/package/ceph/ceph-no-posix_fallocate.patch
@@ -0,0 +1,50 @@
+Do not call posix_fallocate() on uClibc
+
+Based on a patch by Thomas, for lttng-babeltrace, in which he states:
+
+    uClibc does not implement posix_fallocate(), and posix_fallocate() is
+    mostly only an hint to the kernel that we will need such or such
+    amount of space inside a file. So we just don't call posix_fallocate()
+    when building against uClibc.
+
+Just do the same here.
+
+NOTE! IMHO, this patch is not correct, because overcommit (eg. for sparse
+files) on the underlying filesystem may cause allocation failures later on,
+which is exactly the situation that posix_fallocate is supposed to avoid.
+But, as uClibc still lacks posix_fallocate, we have no choice.
+
+If you really are concerned about this issue, there exists a posix_fallocate
+patch that is not upstream, but is used by the AlpineLinux distribution:
+    http://git.alpinelinux.org/cgit/aports/tree/main/libc0.9.32/posix_fallocate.patch?id=98a000b8e92b3aa1e0b7a5f94a74910bb0993c4d
+    http://git.alpinelinux.org/cgit/aports/tree/main/libc0.9.32/posix_fallocate-fix.patch?id=98a000b8e92b3aa1e0b7a5f94a74910bb0993c4d
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+diff -durN ceph-0.50.orig/src/os/FileJournal.cc ceph-0.50/src/os/FileJournal.cc
+--- ceph-0.50.orig/src/os/FileJournal.cc	2012-08-13 18:43:14.000000000 +0200
++++ ceph-0.50/src/os/FileJournal.cc	2012-09-08 23:07:12.597910027 +0200
+@@ -23,6 +23,7 @@
+ #include "include/compat.h"
+ 
+ #include <fcntl.h>
++#include <features.h>
+ #include <sstream>
+ #include <stdio.h>
+ #include <sys/types.h>
+@@ -303,6 +304,7 @@
+ 	   << newsize << " bytes: " << cpp_strerror(err) << dendl;
+       return -err;
+     }
++#ifndef __UCLIBC__
+     ret = ::posix_fallocate(fd, 0, newsize);
+     if (ret < 0) {
+       int err = errno;
+@@ -310,6 +312,7 @@
+ 	   << newsize << " bytes: " << cpp_strerror(err) << dendl;
+       return -err;
+     }
++#endif
+     max_size = newsize;
+   }
+   else {
diff --git a/package/ceph/ceph.mk b/package/ceph/ceph.mk
new file mode 100644
index 0000000..0849837
--- /dev/null
+++ b/package/ceph/ceph.mk
@@ -0,0 +1,53 @@
+#############################################################
+#
+# ceph
+#
+#############################################################
+
+CEPH_VERSION         = 0.51
+CEPH_SOURCE          = ceph-$(CEPH_VERSION).tar.bz2
+CEPH_SITE            = http://ceph.com/download/
+CEPH_LICENSE         = LGPLv2.1 CC-BY-SA Apache-2.0 GPLv2 LGPLv2+ BSD-3c MIT PD
+CEPH_LICENSE_FILES   = COPYING
+CEPH_INSTALL_STAGING = YES
+
+CEPH_DEPENDENCIES    = \
+    boost              \
+    expat              \
+    keyutils           \
+    libedit2           \
+    libnss             \
+    util-linux         \
+
+# We disable everything for now, because the dependency tree can become
+# quite deep if we try to enable some features, and I have not tested that.
+# We need@least one crypto lib, and the currently only one available in
+# BR, that ceph can use, is libnss
+CEPH_CONF_OPT =                     \
+    --with-nss                      \
+    --without-profiler              \
+    --without-debug                 \
+    --without-tcmalloc              \
+    --without-hadoop                \
+    --without-libatomic-ops         \
+    --without-system-leveldb        \
+    --without-system-libs3          \
+    --without-rest-bench            \
+    --without-cryptopp              \
+    --with-ocf                      \
+
+ifeq ($(BR2_PACKAGE_LIBFUSE),y)
+CEPH_DEPENDENCIES += libfuse
+CEPH_CONF_OPT     += --with-fuse
+else
+CEPH_CONF_OPT     += --without-fuse
+endif
+
+ifeq ($(BR2_PACKAGE_LIBAIO),y)
+CEPH_DEPENDENCIES += libaio
+CEPH_CONF_OPT     += --with-libaio
+else
+CEPH_CONF_OPT     += --without-libaio
+endif
+
+$(eval $(autotools-package))
-- 
1.7.2.5

[Buildroot] [PATCH 19/20] package/dtc: new package

[Yann E. MORIN]

dtc is the Device Tree Compiler, and manipulates device trees.

Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

---
Although Arnout suggested to move it out of the libraries sub-menu,
I kept it there, as by default, only the library is installed, like
it is done for, eg., libcurl.
---
 package/Config.in                          |    1 +
 package/dtc/Config.in                      |    9 +++++++
 package/dtc/dtc-extra_cflags.patch         |   27 ++++++++++++++++++++++
 package/dtc/dtc-separate-lib-install.patch |   28 +++++++++++++++++++++++
 package/dtc/dtc.mk                         |   34 ++++++++++++++++++++++++++++
 5 files changed, 99 insertions(+), 0 deletions(-)
 create mode 100644 package/dtc/Config.in
 create mode 100644 package/dtc/dtc-extra_cflags.patch
 create mode 100644 package/dtc/dtc-separate-lib-install.patch
 create mode 100644 package/dtc/dtc.mk

diff --git a/package/Config.in b/package/Config.in
index d395326..1f60aa9 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -417,6 +417,7 @@ endmenu
 
 menu "Hardware handling"
 source "package/ccid/Config.in"
+source "package/dtc/Config.in"
 source "package/lcdapi/Config.in"
 source "package/libaio/Config.in"
 source "package/libraw1394/Config.in"
diff --git a/package/dtc/Config.in b/package/dtc/Config.in
new file mode 100644
index 0000000..96225e3
--- /dev/null
+++ b/package/dtc/Config.in
@@ -0,0 +1,9 @@
+config BR2_PACKAGE_DTC
+	bool "dtc"
+	help
+	  The Device Tree Compiler, dtc, takes as input a device-tree in
+	  a given format and outputs a device-tree in another format.
+	  
+	  Note that only the library is installed for now.
+	  
+	  http://git.jdl.com/gitweb/?p=dtc.git  (no home page)
diff --git a/package/dtc/dtc-extra_cflags.patch b/package/dtc/dtc-extra_cflags.patch
new file mode 100644
index 0000000..9d1882b
--- /dev/null
+++ b/package/dtc/dtc-extra_cflags.patch
@@ -0,0 +1,27 @@
+Makefile: append the CFLAGS to existing ones
+
+Allow the user to pass custom CFLAGS (eg. optimisation flags).
+
+Do not use EXTRA_CFLAGS, append to existing CFLAGS with +=  (Arnout)
+
+Cc: Arnout Vandecappelle <arnout@mind.be>
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+---
+Patch not sent upstream.
+
+Although not specific to buildroot, I am not sure this is the best
+way to handle user-supplied CFLAGS.
+
+diff -durN dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef.orig/Makefile dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef/Makefile
+--- dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef.orig/Makefile	2012-10-22 22:02:47.541240846 +0200
++++ dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef/Makefile	2012-10-22 22:03:21.151047833 +0200
+@@ -18,7 +18,7 @@
+ CPPFLAGS = -I libfdt -I .
+ WARNINGS = -Werror -Wall -Wpointer-arith -Wcast-qual -Wnested-externs \
+ 	-Wstrict-prototypes -Wmissing-prototypes -Wredundant-decls
+-CFLAGS = -g -Os -fPIC -Werror $(WARNINGS)
++CFLAGS += -g -Os -fPIC -Werror $(WARNINGS)
+ 
+ BISON = bison
+ LEX = flex
diff --git a/package/dtc/dtc-separate-lib-install.patch b/package/dtc/dtc-separate-lib-install.patch
new file mode 100644
index 0000000..c86d587
--- /dev/null
+++ b/package/dtc/dtc-separate-lib-install.patch
@@ -0,0 +1,28 @@
+Makefile: add a rule to only install libfdt
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+---
+Patch not sent upstream.
+
+It's really specific to buildroot, and is probably not
+good (aka generic) enough to be pushed upstream.
+
+diff --git a/Makefile b/Makefile
+index 1169e6c..39e7190 100644
+--- a/Makefile
++++ b/Makefile
+@@ -160,10 +160,12 @@ endif
+ # intermediate target and building them again "for real"
+ .SECONDARY: $(DTC_GEN_SRCS) $(CONVERT_GEN_SRCS)
+ 
+-install: all $(SCRIPTS)
++install: all $(SCRIPTS) libfdt_install
+ 	@$(VECHO) INSTALL
+ 	$(INSTALL) -d $(DESTDIR)$(BINDIR)
+ 	$(INSTALL) $(BIN) $(SCRIPTS) $(DESTDIR)$(BINDIR)
++
++libfdt_install: libfdt
+ 	$(INSTALL) -d $(DESTDIR)$(LIBDIR)
+ 	$(INSTALL) $(LIBFDT_lib) $(DESTDIR)$(LIBDIR)
+ 	ln -sf $(notdir $(LIBFDT_lib)) $(DESTDIR)$(LIBDIR)/$(LIBFDT_soname)
diff --git a/package/dtc/dtc.mk b/package/dtc/dtc.mk
new file mode 100644
index 0000000..a0e1e35
--- /dev/null
+++ b/package/dtc/dtc.mk
@@ -0,0 +1,34 @@
+#############################################################
+#
+# dtc
+#
+#############################################################
+
+DTC_VERSION         = e4b497f367a3b2ae99cc52089a14a221b13a76ef
+DTC_SITE            = git://git.jdl.com/software/dtc.git
+DTC_LICENSE         = GPLv2+/BSD-2c
+DTC_LICENSE_FILES   = README.license GPL
+# Note: the dual-license only applies to the library.
+#       The DT compiler (dtc) is GPLv2+, but we do not install it.
+DTC_INSTALL_STAGING = YES
+
+define DTC_BUILD_CMDS
+	$(TARGET_CONFIGURE_OPTS)    \
+	CFLAGS="$(TARGET_CFLAGS)"   \
+	$(MAKE) -C $(@D) PREFIX=/usr libfdt
+endef
+
+#?libfdt_install is our own install rule added by our patch
+define DTC_INSTALL_STAGING_CMDS
+	$(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) PREFIX=/usr libfdt_install
+endef
+
+define DTC_INSTALL_TARGET_CMDS
+	$(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) PREFIX=/usr libfdt_install
+endef
+
+define DTC_CLEAN_CMDS
+	$(MAKE) -C $(@D) libfdt_clean
+endef
+
+$(eval $(generic-package))
-- 
1.7.2.5

[Buildroot] [PATCH 20/20] package/dtc: add option to install programs

[Yann E. MORIN]

By default, we only install the libfdt library.

As suggested by Arnout, add an option that also
installs the few dtc programs.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

---
dtdiff, a diff for device trees, requires bash.

I did not add a 'depends on bash' (or a 'select' either), because
requiring bash just for that is a bit far-fetched.

Instead, at dtc install time, if bash is selected, dtdiff is installed
as usual to the target rootfs; if bash is not selected, dtdiff is
removed from the target rootfs.
---
 package/dtc/Config.in |   24 ++++++++++++++++++++++--
 package/dtc/dtc.mk    |   29 +++++++++++++++++++++++------
 2 files changed, 45 insertions(+), 8 deletions(-)

diff --git a/package/dtc/Config.in b/package/dtc/Config.in
index 96225e3..1c65a10 100644
--- a/package/dtc/Config.in
+++ b/package/dtc/Config.in
@@ -1,9 +1,29 @@
 config BR2_PACKAGE_DTC
-	bool "dtc"
+	bool "dtc (libfdt)"
 	help
 	  The Device Tree Compiler, dtc, takes as input a device-tree in
 	  a given format and outputs a device-tree in another format.
 	  
-	  Note that only the library is installed for now.
+	  Note that only the library is installed.
+	  If you want the programs, say 'y' here, and to "dtc programs", below.
 	  
 	  http://git.jdl.com/gitweb/?p=dtc.git  (no home page)
+
+if BR2_PACKAGE_DTC
+
+config BR2_PACKAGE_DTC_PROGRAMS
+	bool "dtc programs"
+	help
+	  Say 'y' here if you also want the programs on the target:
+	    - convert-dtsv0     convert from version 0 to version 1
+	    - dtc               the device tree compiler
+	    - dtdiff            compare two device trees (needs bash)
+	    - fdtdump           print a readable version of a flat device tree
+	    - fdtget            read values from device tree
+	    - fdtput            write a property value to a device tree
+	  
+	  Note: dtdiff requires bash, so if bash is not selected, dtdiff will
+	        be removed from the target file system. Enable bash if you
+	        need dtdiff on the target.
+
+endif
diff --git a/package/dtc/dtc.mk b/package/dtc/dtc.mk
index a0e1e35..42843d5 100644
--- a/package/dtc/dtc.mk
+++ b/package/dtc/dtc.mk
@@ -8,27 +8,44 @@ DTC_VERSION         = e4b497f367a3b2ae99cc52089a14a221b13a76ef
 DTC_SITE            = git://git.jdl.com/software/dtc.git
 DTC_LICENSE         = GPLv2+/BSD-2c
 DTC_LICENSE_FILES   = README.license GPL
-# Note: the dual-license only applies to the library.
-#       The DT compiler (dtc) is GPLv2+, but we do not install it.
 DTC_INSTALL_STAGING = YES
 
+ifeq ($(BR2_PACKAGE_DTC_PROGRAMS),y)
+DTC_LICENSE        += (for the library), GPLv2+ (for the executables)
+# Use default goal to build everything
+DTC_BUILD_GOAL      =
+DTC_INSTALL_GOAL    = install
+DTC_CLEAN_GOAL      = clean
+else # $(BR2_PACKAGE_DTC_PROGRAMS) != y
+DTC_BUILD_GOAL      = libfdt
+#?libfdt_install is our own install rule added by our patch
+DTC_INSTALL_GOAL    = libfdt_install
+DTC_CLEAN_GOAL      = libfdt_clean
+ifeq ($(BR2_PACKAGE_BASH),)
+DTC_POST_INSTALL_TARGET_HOOKS += DTC_POST_INSTALL_TARGET_RM_DTDIFF
+endif
+endif # $(BR2_PACKAGE_DTC_PROGRAMS) != y
+
 define DTC_BUILD_CMDS
 	$(TARGET_CONFIGURE_OPTS)    \
 	CFLAGS="$(TARGET_CFLAGS)"   \
-	$(MAKE) -C $(@D) PREFIX=/usr libfdt
+	$(MAKE) -C $(@D) PREFIX=/usr $(DTC_BUILD_GOAL)
 endef
 
-#?libfdt_install is our own install rule added by our patch
+# For staging, only the library is needed
 define DTC_INSTALL_STAGING_CMDS
 	$(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) PREFIX=/usr libfdt_install
 endef
 
 define DTC_INSTALL_TARGET_CMDS
-	$(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) PREFIX=/usr libfdt_install
+	$(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) PREFIX=/usr $(DTC_INSTALL_GOAL)
+endef
+define DTC_POST_INSTALL_TARGET_RM_DTDIFF
+	rm -f $(TARGET_DIR)/usr/bin/dtdiff
 endef
 
 define DTC_CLEAN_CMDS
-	$(MAKE) -C $(@D) libfdt_clean
+	$(MAKE) -C $(@D) $(DTC_CLEAN_GOAL)
 endef
 
 $(eval $(generic-package))
-- 
1.7.2.5

[Buildroot] [pull request] Pull request for branch yem-new-packages

[Arnout Vandecappelle]

On 13/12/12 22:47, Yann E. MORIN wrote:
> This patch series is an extract from my qemu-related big-ish series,
> that I did split up to ease regview / integration upstream.

  Thanks, that's really useful!

  Now I just have to find some time to review...

  Regards,
  Arnout

-- 
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F