[Buildroot] Mono Project

[Buildroot] Mono Project

[Rainer]

 Hi

 has anyone done some work/ tests with Mono and Buildroot in the past or 
 is
 currently working on it ?
 I want to do some tests with a Beaglebone board.

 (I have already send this request but i was stored the boost thread)

 Regards

 Rainer

[Buildroot] Mono Project

[Yegor Yefremov]

On 25.01.2013 08:16, Rainer Berns at beka-elektronik.de wrote:
> Hi
> 
> has anyone done some work/ tests with Mono and Buildroot in the past or is
> currently working on it ?
> I want to do some tests with a Beaglebone board.
> 
> (I have already send this request but i was stored the boost thread)

I remember trying to integrate mono, but they seem to perform some run-time tests with already compiled binaries. This behavior has to be changed otherwise you cannot cross-compile it. 

Haven't looked at this for ages, perhaps something has changed since then.

Best regards,
Yegor

 

[Buildroot] Mono Project

[Pierre Ficheux]

I planned to build a package for Mono as I had to cross compile it for a customer. There
was an old patch  here:

http://lists.busybox.net/pipermail/buildroot/2010-April/033901.html

Currently I just have a binary archive but should not be so difficult.

----- Mail original -----
> De: "Rainer Berns at beka-elektronik.de" <berns@beka-elektronik.de>
> ?: buildroot at busybox.net
> Envoy?: Vendredi 25 Janvier 2013 08:16:59
> Objet: [Buildroot] Mono Project
> 
> Hi
> 
>  has anyone done some work/ tests with Mono and Buildroot in the past
>  or
>  is
>  currently working on it ?
>  I want to do some tests with a Beaglebone board.
> 
>  (I have already send this request but i was stored the boost thread)
> 
>  Regards
> 
>  Rainer
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
> 

[Buildroot] Mono Project

[Eric Bénard]

Hi Rainer,

Le Fri, 25 Jan 2013 08:16:59 +0100,
"Rainer Berns at beka-elektronik.de" <berns@beka-elektronik.de> a ?crit :
>  has anyone done some work/ tests with Mono and Buildroot in the past or 
>  is
>  currently working on it ?
>  I want to do some tests with a Beaglebone board.
> 
you can base your work (and get some patches fixing cross compilation
problems) on the recipes in :
http://git.yoctoproject.org/cgit/cgit.cgi/meta-mono/tree/

Eric

[Buildroot] Boost integration

[Willy Lambert]

2013/1/23 Peter Korsgaard <jacmet@uclibc.org>:
>>>>>> "Willy" == Willy Lambert <lambert.willy@gmail.com> writes:
>
> Hi,
>
>  Willy> I see that you put the sources tarball on :
>  Willy> http://sources.buildroot.net/
>  Willy> and many other are taken from here.
>
>  Willy> Is it a good practice to put all there to keep the availibility
>  Willy> of all links, or is it just because no external links exist ?
>
> It's just a backup in case upstream is down/disappears.
>
> --
> Bye, Peter Korsgaard

Ok, then the current link to boost sourceforge seems broken, does
anyone else has the same problem ?

Maybe : BOOST_SITE =
http://sourceforge.net/projects/boost/files/boost/$(BOOST_VERSION)
would be a working solution, butI found it by tries and fails so it is
maybe not the best link.

I can propose you a patch to be abble to select different version a
boost in config menus. But I'm not sure that the current mk can handle
other versions.

I personnaly put Boost in Packages->Librairies->Boost. It is currently
in a "Other" menu.Don't you think it would be a better place ?

[Buildroot] Mono Project

[Berns]

Hi,

has anyone done some work/ tests with Mono and Buildroot in the past or is
currently working on it ?
I want to do some tests with a Beaglebone board.

Regards

Rainer