[Buildroot] Extend and use the <pkg>_CONFIG_FIXUP infra

[Buildroot] Extend and use the <pkg>_CONFIG_FIXUP infra

[Thomas Petazzoni]

Hello,

This patch series improves on the <pkg>_CONFIG_FIXUP work done by
Stefan Fr?berg by:

 * Renaming the variable to <pkg>_CONFIG_SCRIPTS. I believe this is
   needed, because we will not only "fixup" those files, but also
   remove them from the target directory. Also, I don't think the
   variable name should indicate what will happen to these files. It
   should just indicate what those files are.

 * Extending the <pkg>_CONFIG_SCRIPTS handling to remove the config
   scripts from the TARGET_DIR, unless BR2_HAVE_DEVFILES is set (even
   though it is deprecated, it is still here).

 * Use <pkg>_CONFIG_SCRIPTS in a number of packages that were already
   fixing manually their <foo>-config script and for which the new
   infrastructure does exactly the same thing.

 * Use <pkg>_CONFIG_SCRIPTS in a number of packages that were doing a
   bit more than the infrastructure: fixing the includedir and libdir
   fields. A manual inspection of each of those packages shows that by
   default, the includedir and libdir are described relatively to
   prefix and exec_prefix, so fixing up those is sufficient, and this
   is what the infrastructure does.

 * Use <pkg>_CONFIG_SCRIPTS to fix up gpg-error-config installed by
   the libgpg-error package. This is done separately from the previous
   patch, because libgpg-error was not previously doing any fix up of
   its gpg-error-config script.

Best regards,

Thomas

[Buildroot] [PATCH 1/5] package: rename <pkg>_CONFIG_FIXUP to <pkg>_CONFIG_SCRIPTS

[Thomas Petazzoni]

This commit renames the newly introduced <pkg>_CONFIG_FIXUP variable
to <pkg>_CONFIG_SCRIPTS, for two reasons:

 * <pkg>_CONFIG_SCRIPTS will not only "fixup" the scripts in
   $(STAGING_DIR)/usr/bin, but also remove them from
   $(TARGET_DIR)/usr/bin. So it is not only about doing a "fixup".

 * On the principle, it is strange that the variable carries an
   indication of the action that will take place on those files. It
   should rather be named to say "Here are the <foo>-config scripts",
   and let the package infrastructure decide if it should fix them up,
   remove them, etc.

This commit also updates the documentation accordingly.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 docs/manual/adding-packages-generic.txt |   17 +++++++++--------
 package/libpcap/libpcap.mk              |    2 +-
 package/pkg-generic.mk                  |    4 ++--
 3 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/docs/manual/adding-packages-generic.txt b/docs/manual/adding-packages-generic.txt
index 41a94d7..13d200d 100644
--- a/docs/manual/adding-packages-generic.txt
+++ b/docs/manual/adding-packages-generic.txt
@@ -25,7 +25,7 @@ system is based on hand-written Makefiles or shell scripts.
 09: LIBFOO_LICENSE = GPLv3+
 10: LIBFOO_LICENSE_FILES = COPYING
 11: LIBFOO_INSTALL_STAGING = YES
-12: LIBFOO_CONFIG_FIXUP = libfoo-config
+12: LIBFOO_CONFIG_SCRIPTS = libfoo-config
 13: LIBFOO_DEPENDENCIES = host-libaaa libbbb
 14:
 15: define LIBFOO_BUILD_CMDS
@@ -86,7 +86,7 @@ or:		'-L/usr/lib' instead of '-L$(STAGING_DIR)/usr/lib'
 
 So some sed magic is done to these scripts to make them give correct
 flags.
-The argument to be given to +LIBFOO_CONFIG_FIXUP+ is the file name(s)
+The argument to be given to +LIBFOO_CONFIG_SCRIPTS+ is the file name(s)
 of the shell script(s) needing fixing. All these names are relative to
 '$(STAGING_DIR)/usr/bin' and if needed multiple names can be given.
 
@@ -96,7 +96,7 @@ Package divine installs shell script '$(STAGING_DIR)/usr/bin/divine-config'.
 
 So it's fixup would be:
 
-DIVINE_CONFIG = divine-config
+DIVINE_CONFIG_SCRIPTS = divine-config
 
 Example 2:
 
@@ -105,8 +105,9 @@ Package imagemagick installs the following scripts:
 
 So it's fixup would be:
 
-IMAGEMAGICK_CONFIG_FIXUP = Magick-config Magick++-config \
-			   MagickCore-config MagickWand-config Wand-config
+IMAGEMAGICK_CONFIG_SCRIPTS = \
+   Magick-config Magick++-config \
+   MagickCore-config MagickWand-config Wand-config
 
 On line 13, we specify the list of dependencies this package relies
 on. These dependencies are listed in terms of lower-case package names,
@@ -284,10 +285,10 @@ information is (assuming the package name is +libfoo+) :
   variables are executed to install the package into the target
   directory.
 
-* +LIBFOO_CONFIG_FIXUP+ lists the names of the files in
+* +LIBFOO_CONFIG_SCRIPTS+ lists the names of the files in
   '$(STAGING_DIR)/usr/bin' that need some special fixing to make them
-  cross-compiling friendly. Multiple file names separated by space can be
-  given and all are relative to '$(STAGING_DIR)/usr/bin'.
+  cross-compiling friendly. Multiple file names separated by space can
+  be given and all are relative to '$(STAGING_DIR)/usr/bin'.
 
 * +LIBFOO_DEVICES+ lists the device files to be created by Buildroot
   when using the static device table. The syntax to use is the
diff --git a/package/libpcap/libpcap.mk b/package/libpcap/libpcap.mk
index 5be61bf..06aec0f 100644
--- a/package/libpcap/libpcap.mk
+++ b/package/libpcap/libpcap.mk
@@ -24,7 +24,7 @@ LIBPCAP_DEPENDENCIES = zlib
 LIBPCAP_CONF_ENV = ac_cv_linux_vers=2 \
 		ac_cv_header_linux_wireless_h=yes # configure misdetects this
 LIBPCAP_CONF_OPT = --disable-yydebug --with-pcap=linux
-LIBPCAP_CONFIG_FIXUP = pcap-config
+LIBPCAP_CONFIG_SCRIPTS = pcap-config
 
 ifeq ($(BR2_PACKAGE_LIBUSB),y)
 LIBPCAP_CONF_OPT += --enable-canusb
diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk
index 19a115e..066b6c8 100644
--- a/package/pkg-generic.mk
+++ b/package/pkg-generic.mk
@@ -128,12 +128,12 @@ $(BUILD_DIR)/%/.stamp_staging_installed:
 	@$(call MESSAGE,"Installing to staging directory")
 	$($(PKG)_INSTALL_STAGING_CMDS)
 	$(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
-	$(Q)if test -n "$($(PKG)_CONFIG_FIXUP)" ; then \
+	$(Q)if test -n "$($(PKG)_CONFIG_SCRIPTS)" ; then \
 		$(call MESSAGE,"Fixing package configuration files") ;\
 			$(SED)  "s,^\(exec_\)\?prefix=.*,\1prefix=$(STAGING_DIR)/usr,g" \
 				-e "s,-I/usr/,-I$(STAGING_DIR)/usr/,g" \
 				-e "s,-L/usr/,-L$(STAGING_DIR)/usr/,g" \
-				$(addprefix $(STAGING_DIR)/usr/bin/,$($(PKG)_CONFIG_FIXUP)) ;\
+				$(addprefix $(STAGING_DIR)/usr/bin/,$($(PKG)_CONFIG_SCRIPTS)) ;\
 	fi
 	$(Q)touch $@
 
-- 
1.7.9.5

[Buildroot] [PATCH 1/5] package: rename <pkg>_CONFIG_FIXUP to <pkg>_CONFIG_SCRIPTS

[Arnout Vandecappelle]

On 07/02/13 00:10, Thomas Petazzoni wrote:
> This commit also updates the documentation accordingly.
>
> Signed-off-by: Thomas Petazzoni<thomas.petazzoni@free-electrons.com>

Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

[Buildroot] [PATCH 1/5] package: rename <pkg>_CONFIG_FIXUP to <pkg>_CONFIG_SCRIPTS

[Samuel Martin]

2013/2/7 Arnout Vandecappelle <arnout@mind.be>:
> On 07/02/13 00:10, Thomas Petazzoni wrote:
>>
>> This commit also updates the documentation accordingly.
>>
>> Signed-off-by: Thomas Petazzoni<thomas.petazzoni@free-electrons.com>
>
>
> Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>

-- 
Samuel

[Buildroot] [PATCH 2/5] package: remove scripts listed in <pkg>_CONFIG_SCRIPTS from target

[Thomas Petazzoni]

The <foo>-config scripts are useless on the target, since they are
only needed for development, so we remove them automatically.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 docs/manual/adding-packages-generic.txt |   11 ++++++++++-
 package/pkg-generic.mk                  |    5 +++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/docs/manual/adding-packages-generic.txt b/docs/manual/adding-packages-generic.txt
index 13d200d..1450907 100644
--- a/docs/manual/adding-packages-generic.txt
+++ b/docs/manual/adding-packages-generic.txt
@@ -90,6 +90,11 @@ The argument to be given to +LIBFOO_CONFIG_SCRIPTS+ is the file name(s)
 of the shell script(s) needing fixing. All these names are relative to
 '$(STAGING_DIR)/usr/bin' and if needed multiple names can be given.
 
+In addition, the scripts listed in +LIBFOO_CONFIG_SCRIPTS+ are removed
+from +$(TARGET_DIR)/usr/bin+ if they are not needed (i.e, when the
+installation of development files on the target has not been selected,
+which is the default).
+
 Example 1:
 
 Package divine installs shell script '$(STAGING_DIR)/usr/bin/divine-config'.
@@ -288,7 +293,11 @@ information is (assuming the package name is +libfoo+) :
 * +LIBFOO_CONFIG_SCRIPTS+ lists the names of the files in
   '$(STAGING_DIR)/usr/bin' that need some special fixing to make them
   cross-compiling friendly. Multiple file names separated by space can
-  be given and all are relative to '$(STAGING_DIR)/usr/bin'.
+  be given and all are relative to '$(STAGING_DIR)/usr/bin'. The files
+  listed in +LIBFOO_CONFIG_SCRIPTS+ are also removed from
+  +$(TARGET_DIR)/usr/bin+ if they are not needed (i.e, when the
+  installation of development files on the target has not been
+  selected, which is the default).
 
 * +LIBFOO_DEVICES+ lists the device files to be created by Buildroot
   when using the static device table. The syntax to use is the
diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk
index 066b6c8..57b0fd0 100644
--- a/package/pkg-generic.mk
+++ b/package/pkg-generic.mk
@@ -153,6 +153,11 @@ $(BUILD_DIR)/%/.stamp_target_installed:
 		$($(PKG)_INSTALL_INIT_SYSV))
 	$($(PKG)_INSTALL_TARGET_CMDS)
 	$(foreach hook,$($(PKG)_POST_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
+ifeq ($(BR2_HAVE_DEVFILES),)
+	$(Q)if test -n "$($(PKG)_CONFIG_SCRIPTS)" ; then \
+		$(RM) -f $(addprefix $(TARGET_DIR)/usr/bin/,$($(PKG)_CONFIG_SCRIPTS)) ; \
+	fi
+endif
 	$(Q)touch $@
 
 # Clean package
-- 
1.7.9.5

[Buildroot] [PATCH 2/5] package: remove scripts listed in <pkg>_CONFIG_SCRIPTS from target

[Arnout Vandecappelle]

On 07/02/13 00:10, Thomas Petazzoni wrote:
> The <foo>-config scripts are useless on the target, since they are
> only needed for development, so we remove them automatically.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

> ---
>   docs/manual/adding-packages-generic.txt |   11 ++++++++++-
>   package/pkg-generic.mk                  |    5 +++++
>   2 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/docs/manual/adding-packages-generic.txt b/docs/manual/adding-packages-generic.txt
> index 13d200d..1450907 100644
> --- a/docs/manual/adding-packages-generic.txt
> +++ b/docs/manual/adding-packages-generic.txt
> @@ -90,6 +90,11 @@ The argument to be given to +LIBFOO_CONFIG_SCRIPTS+ is the file name(s)
>   of the shell script(s) needing fixing. All these names are relative to
>   '$(STAGING_DIR)/usr/bin' and if needed multiple names can be given.
>
> +In addition, the scripts listed in +LIBFOO_CONFIG_SCRIPTS+ are removed
> +from +$(TARGET_DIR)/usr/bin+ if they are not needed (i.e, when the
> +installation of development files on the target has not been selected,
> +which is the default).

  I wouldn't document deprecated things. So just remove "if they are not 
needed ...".

> +
>   Example 1:
>
>   Package divine installs shell script '$(STAGING_DIR)/usr/bin/divine-config'.
> @@ -288,7 +293,11 @@ information is (assuming the package name is +libfoo+) :
>   * +LIBFOO_CONFIG_SCRIPTS+ lists the names of the files in
>     '$(STAGING_DIR)/usr/bin' that need some special fixing to make them
>     cross-compiling friendly. Multiple file names separated by space can
> -  be given and all are relative to '$(STAGING_DIR)/usr/bin'.
> +  be given and all are relative to '$(STAGING_DIR)/usr/bin'. The files
> +  listed in +LIBFOO_CONFIG_SCRIPTS+ are also removed from
> +  +$(TARGET_DIR)/usr/bin+ if they are not needed (i.e, when the
> +  installation of development files on the target has not been
> +  selected, which is the default).

  Same here.


  Regards,
  Arnout

>
>   * +LIBFOO_DEVICES+ lists the device files to be created by Buildroot
>     when using the static device table. The syntax to use is the
> diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk
> index 066b6c8..57b0fd0 100644
> --- a/package/pkg-generic.mk
> +++ b/package/pkg-generic.mk
> @@ -153,6 +153,11 @@ $(BUILD_DIR)/%/.stamp_target_installed:
>   		$($(PKG)_INSTALL_INIT_SYSV))
>   	$($(PKG)_INSTALL_TARGET_CMDS)
>   	$(foreach hook,$($(PKG)_POST_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
> +ifeq ($(BR2_HAVE_DEVFILES),)
> +	$(Q)if test -n "$($(PKG)_CONFIG_SCRIPTS)" ; then \
> +		$(RM) -f $(addprefix $(TARGET_DIR)/usr/bin/,$($(PKG)_CONFIG_SCRIPTS)) ; \
> +	fi
> +endif
>   	$(Q)touch $@
>
>   # Clean package
>


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

[Buildroot] [PATCH 2/5] package: remove scripts listed in <pkg>_CONFIG_SCRIPTS from target

[Samuel Martin]

2013/2/7 Arnout Vandecappelle <arnout@mind.be>:
> On 07/02/13 00:10, Thomas Petazzoni wrote:
>>
>> The <foo>-config scripts are useless on the target, since they are
>> only needed for development, so we remove them automatically.
>>
>> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>
>
> Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>

>
>
>> ---
>>   docs/manual/adding-packages-generic.txt |   11 ++++++++++-
>>   package/pkg-generic.mk                  |    5 +++++
>>   2 files changed, 15 insertions(+), 1 deletion(-)
>>
>> diff --git a/docs/manual/adding-packages-generic.txt
>> b/docs/manual/adding-packages-generic.txt
>> index 13d200d..1450907 100644
>> --- a/docs/manual/adding-packages-generic.txt
>> +++ b/docs/manual/adding-packages-generic.txt
>> @@ -90,6 +90,11 @@ The argument to be given to +LIBFOO_CONFIG_SCRIPTS+ is
>> the file name(s)
>>   of the shell script(s) needing fixing. All these names are relative to
>>   '$(STAGING_DIR)/usr/bin' and if needed multiple names can be given.
>>
>> +In addition, the scripts listed in +LIBFOO_CONFIG_SCRIPTS+ are removed
>> +from +$(TARGET_DIR)/usr/bin+ if they are not needed (i.e, when the
>> +installation of development files on the target has not been selected,
>> +which is the default).
>
>
>  I wouldn't document deprecated things. So just remove "if they are not
> needed ...".
I tend to agree with Arnout.

Regards,

-- 
Samuel

[Buildroot] [PATCH 3/5] package: use <pkg>_CONFIG_SCRIPTS wherever possible

[Thomas Petazzoni]

Use the <pkg>_CONFIG_SCRIPTS mechanism in all packages for which it
does all what the package was doing. A few packages, like libxslt, are
for now left out, since they need some additional fixup (for example a
fixup of includedir).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 package/cups/cups.mk                   |   10 +---------
 package/directfb/directfb.mk           |    9 +--------
 package/divine/divine.mk               |    9 +--------
 package/gd/gd.mk                       |   10 +---------
 package/giblib/giblib.mk               |    9 +--------
 package/icu/icu.mk                     |    9 +--------
 package/imagemagick/imagemagick.mk     |   12 ++----------
 package/libcurl/libcurl.mk             |   11 ++++-------
 package/libdvdnav/libdvdnav.mk         |   16 +---------------
 package/libdvdread/libdvdread.mk       |   15 +--------------
 package/libgcrypt/libgcrypt.mk         |   10 +---------
 package/libmcrypt/libmcrypt.mk         |    9 +--------
 package/libnspr/libnspr.mk             |   10 ++--------
 package/libusb-compat/libusb-compat.mk |    9 +--------
 package/libxml2/libxml2.mk             |   17 +----------------
 package/ncurses/ncurses.mk             |    8 +-------
 package/neon/neon.mk                   |   18 +-----------------
 package/pcre/pcre.mk                   |   17 +----------------
 package/php/php.mk                     |   11 +----------
 19 files changed, 24 insertions(+), 195 deletions(-)

diff --git a/package/cups/cups.mk b/package/cups/cups.mk
index 3eb83ea..f8ace71 100644
--- a/package/cups/cups.mk
+++ b/package/cups/cups.mk
@@ -15,6 +15,7 @@ CUPS_CONF_OPT = --without-perl \
 		--disable-gnutls \
 		--disable-gssapi \
 		--libdir=/usr/lib
+CUPS_CONFIG_SCRIPTS = cups-config
 
 CUPS_DEPENDENCIES = $(if $(BR2_PACKAGE_ZLIB),zlib) \
 		    $(if $(BR2_PACKAGE_LIBPNG),libpng) \
@@ -61,13 +62,4 @@ CUPS_DEPENDENCIES += host-autoconf
 
 CUPS_PRE_CONFIGURE_HOOKS += CUPS_FIXUP_AUTOCONF
 
-# Fixup prefix= and exec_prefix= in cups-config
-define CUPS_FIXUP_CUPS_CONFIG
-	$(SED) 's%^prefix=/usr%prefix=$(STAGING_DIR)/usr%' \
-		-e 's%^exec_prefix=/usr%exec_prefix=$(STAGING_DIR)/usr%' \
-		$(STAGING_DIR)/usr/bin/cups-config
-endef
-
-CUPS_POST_INSTALL_STAGING_HOOKS += CUPS_FIXUP_CUPS_CONFIG
-
 $(eval $(autotools-package))
diff --git a/package/directfb/directfb.mk b/package/directfb/directfb.mk
index 6d5b1ce..4f05ed2 100644
--- a/package/directfb/directfb.mk
+++ b/package/directfb/directfb.mk
@@ -23,6 +23,7 @@ DIRECTFB_CONF_OPT = \
 	--disable-video4linux \
 	--disable-video4linux2 \
 	--without-tools
+DIRECTFB_CONFIG_SCRIPTS = directfb-config
 
 DIRECTFB_DEPENDENCIES = freetype zlib
 
@@ -131,14 +132,6 @@ HOST_DIRECTFB_BUILD_CMDS = \
 HOST_DIRECTFB_INSTALL_CMDS = \
 	$(INSTALL) -m 0755 $(@D)/tools/directfb-csource $(HOST_DIR)/usr/bin
 
-define DIRECTFB_STAGING_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		$(STAGING_DIR)/usr/bin/directfb-config
-endef
-
-DIRECTFB_POST_INSTALL_STAGING_HOOKS += DIRECTFB_STAGING_CONFIG_FIXUP
-
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
 
diff --git a/package/divine/divine.mk b/package/divine/divine.mk
index 1fd27d2..b949601 100644
--- a/package/divine/divine.mk
+++ b/package/divine/divine.mk
@@ -9,13 +9,6 @@ DIVINE_SITE = http://www.directfb.org/downloads/Extras
 DIVINE_SOURCE = DiVine-$(DIVINE_VERSION).tar.gz
 DIVINE_INSTALL_STAGING = YES
 DIVINE_DEPENDENCIES = directfb
-
-define DIVINE_STAGING_DIVINE_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		$(STAGING_DIR)/usr/bin/divine-config
-endef
-
-DIVINE_POST_INSTALL_STAGING_HOOKS += DIVINE_STAGING_DIVINE_CONFIG_FIXUP
+DIVINE_CONFIG_SCRIPTS = divine-config
 
 $(eval $(autotools-package))
diff --git a/package/gd/gd.mk b/package/gd/gd.mk
index 1f9b1d6..60c1c51 100644
--- a/package/gd/gd.mk
+++ b/package/gd/gd.mk
@@ -13,6 +13,7 @@ GD_INSTALL_STAGING = YES
 GD_LICENSE = GD license
 GD_LICENSE_FILES = COPYING
 
+GD_CONFIG_SCRIPTS = gdlib-config
 GD_CONF_OPT = --without-x --disable-rpath
 
 ifeq ($(BR2_PACKAGE_FONTCONFIG),y)
@@ -66,15 +67,6 @@ endef
 GD_PRE_CONFIGURE_HOOKS += GD_FIXUP_ICONV
 endif
 
-define GD_FIXUP_GDLIB_CONFIG
-	$(SED) 's%prefix=/usr%prefix=$(STAGING_DIR)/usr%' \
-	    -e 's%exec_prefix=/usr%exec_prefix=$(STAGING_DIR)/usr%' \
-		$(STAGING_DIR)/usr/bin/gdlib-config
-endef
-
-GD_POST_INSTALL_STAGING_HOOKS += GD_FIXUP_GDLIB_CONFIG
-
-GD_TOOLS_                         	+= gdlib-config
 GD_TOOLS_$(BR2_PACKAGE_GD_ANNOTATE)	+= annotate
 GD_TOOLS_$(BR2_PACKAGE_GD_BDFTOGD)	+= bdftogd
 GD_TOOLS_$(BR2_PACKAGE_GD_GD2COPYPAL)	+= gd2copypal
diff --git a/package/giblib/giblib.mk b/package/giblib/giblib.mk
index 75e21bb..ab2bbef 100644
--- a/package/giblib/giblib.mk
+++ b/package/giblib/giblib.mk
@@ -12,13 +12,6 @@ GIBLIB_AUTORECONF = YES
 GIBLIB_AUTORECONF_OPT = --install
 GIBLIB_CONF_OPT = --with-imlib2-prefix=$(STAGING_DIR)/usr \
 		  --with-imlib2-exec-prefix=$(STAGING_DIR)/usr
-
-define GIBLIB_STAGING_GIBLIB_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		$(STAGING_DIR)/usr/bin/giblib-config
-endef
-
-GIBLIB_POST_INSTALL_STAGING_HOOKS += GIBLIB_STAGING_GIBLIB_CONFIG_FIXUP
+GIBLIB_CONFIG_SCRIPTS = giblib-config
 
 $(eval $(autotools-package))
diff --git a/package/icu/icu.mk b/package/icu/icu.mk
index 541ca35..5a88496 100644
--- a/package/icu/icu.mk
+++ b/package/icu/icu.mk
@@ -12,6 +12,7 @@ ICU_LICENSE_FILES = license.html
 
 ICU_DEPENDENCIES = host-icu
 ICU_INSTALL_STAGING = YES
+ICU_CONFIG_SCRIPTS = icu-config
 ICU_CONF_OPT = --with-cross-build=$(HOST_ICU_DIR)/source --disable-samples \
 		--disable-tests
 HOST_ICU_CONF_OPT = --disable-samples --disable-tests
@@ -19,13 +20,5 @@ ICU_MAKE = $(MAKE1)
 ICU_SUBDIR = source
 HOST_ICU_SUBDIR = source
 
-define ICU_PREFIX_FIXUP
-	$(SED) "s,^default_prefix=.*,default_prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		$(STAGING_DIR)/usr/bin/icu-config
-endef
-
-ICU_POST_INSTALL_TARGET_HOOKS += ICU_PREFIX_FIXUP
-
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
diff --git a/package/imagemagick/imagemagick.mk b/package/imagemagick/imagemagick.mk
index 0476ace..722ab40 100644
--- a/package/imagemagick/imagemagick.mk
+++ b/package/imagemagick/imagemagick.mk
@@ -16,6 +16,8 @@ IMAGEMAGICK_LICENSE_FILES = LICENSE
 
 IMAGEMAGICK_INSTALL_STAGING = YES
 IMAGEMAGICK_AUTORECONF = YES
+IMAGEMAGICK_CONFIG_SCRIPTS = \
+	$(addsuffix -config,Magick MagickCore MagickWand Wand Magick++)
 
 ifeq ($(BR2_LARGEFILE),y)
 IMAGEMAGICK_CONF_ENV = ac_cv_sys_file_offset_bits=64
@@ -113,14 +115,4 @@ else
 IMAGEMAGICK_CONF_OPT += --without-bzip2
 endif
 
-define IMAGEMAGICK_REMOVE_CONFIG_SCRIPTS
-	$(RM) -f $(addprefix $(TARGET_DIR)/usr/bin/,	\
-		   $(addsuffix -config,			\
-		     Magick MagickCore MagickWand Wand Magick++))
-endef
-
-ifneq ($(BR2_HAVE_DEVFILES),y)
-IMAGEMAGICK_POST_INSTALL_TARGET_HOOKS += IMAGEMAGICK_REMOVE_CONFIG_SCRIPTS
-endif
-
 $(eval $(autotools-package))
diff --git a/package/libcurl/libcurl.mk b/package/libcurl/libcurl.mk
index fd00694..38ca854 100644
--- a/package/libcurl/libcurl.mk
+++ b/package/libcurl/libcurl.mk
@@ -11,6 +11,7 @@ LIBCURL_LICENSE = ICS
 LIBCURL_LICENSE_FILES = COPYING
 LIBCURL_INSTALL_STAGING = YES
 LIBCURL_CONF_OPT = --disable-verbose --disable-manual --enable-hidden-symbols
+LIBCURL_CONFIG_SCRIPTS = curl-config
 
 ifeq ($(BR2_PACKAGE_OPENSSL),y)
 LIBCURL_DEPENDENCIES += openssl
@@ -30,16 +31,12 @@ define LIBCURL_FIX_DOT_PC
 endef
 LIBCURL_POST_PATCH_HOOKS += $(if $(BR2_PACKAGE_OPENSSL),LIBCURL_FIX_DOT_PC)
 
+ifeq ($(BR2_PACKAGE_CURL),)
 define LIBCURL_TARGET_CLEANUP
-	rm -rf $(TARGET_DIR)/usr/bin/curl-config \
-	       $(if $(BR2_PACKAGE_CURL),,$(TARGET_DIR)/usr/bin/curl)
+	rm -rf $(TARGET_DIR)/usr/bin/curl
 endef
 LIBCURL_POST_INSTALL_TARGET_HOOKS += LIBCURL_TARGET_CLEANUP
-
-define LIBCURL_STAGING_FIXUP_CURL_CONFIG
-	$(SED) "s,prefix=/usr,prefix=$(STAGING_DIR)/usr," $(STAGING_DIR)/usr/bin/curl-config
-endef
-LIBCURL_POST_INSTALL_STAGING_HOOKS += LIBCURL_STAGING_FIXUP_CURL_CONFIG
+endif
 
 $(eval $(autotools-package))
 
diff --git a/package/libdvdnav/libdvdnav.mk b/package/libdvdnav/libdvdnav.mk
index 520f58d..e975313 100644
--- a/package/libdvdnav/libdvdnav.mk
+++ b/package/libdvdnav/libdvdnav.mk
@@ -9,25 +9,11 @@ LIBDVDNAV_SOURCE = libdvdnav-$(LIBDVDNAV_VERSION).tar.bz2
 LIBDVDNAV_SITE = http://dvdnav.mplayerhq.hu/releases
 LIBDVDNAV_AUTORECONF = YES
 LIBDVDNAV_INSTALL_STAGING = YES
-
+LIBDVDNAV_CONFIG_SCRIPTS = dvdnav-config
 LIBDVDNAV_DEPENDENCIES = libdvdread host-pkgconf
 
 # By default libdvdnav tries to find dvdread-config in $PATH. Because
 # of cross compilation, we prefer using pkg-config.
 LIBDVDNAV_CONF_OPT = --with-dvdread-config="$(PKG_CONFIG_HOST_BINARY) dvdread"
 
-define LIBDVDNAV_TARGET_CLEANUP
-	$(RM) -f $(TARGET_DIR)/usr/bin/dvdnav-config
-endef
-
-ifneq ($(BR2_HAVE_DEVFILES),y)
-LIBDVDNAV_POST_INSTALL_TARGET_HOOKS += LIBDVDNAV_TARGET_CLEANUP
-endif
-
-define LIBDVDNAV_STAGING_FIXUP_DVDNAV_CONFIG
-	$(SED) "s,prefix=/usr,prefix=$(STAGING_DIR)/usr," $(STAGING_DIR)/usr/bin/dvdnav-config
-endef
-
-LIBDVDNAV_POST_INSTALL_STAGING_HOOKS += LIBDVDNAV_STAGING_FIXUP_DVDNAV_CONFIG
-
 $(eval $(autotools-package))
diff --git a/package/libdvdread/libdvdread.mk b/package/libdvdread/libdvdread.mk
index ee616f0..29c3472 100644
--- a/package/libdvdread/libdvdread.mk
+++ b/package/libdvdread/libdvdread.mk
@@ -10,19 +10,6 @@ LIBDVDREAD_SITE = http://dvdnav.mplayerhq.hu/releases
 LIBDVDREAD_AUTORECONF = YES
 LIBDVDREAD_LIBTOOL_PATCH = YES
 LIBDVDREAD_INSTALL_STAGING = YES
-
-define LIBDVDREAD_TARGET_CLEANUP
-	$(RM) -f $(TARGET_DIR)/usr/bin/dvdread-config
-endef
-
-ifneq ($(BR2_HAVE_DEVFILES),y)
-LIBDVDREAD_POST_INSTALL_TARGET_HOOKS += LIBDVDREAD_TARGET_CLEANUP
-endif
-
-define LIBDVDREAD_STAGING_FIXUP_DVDREAD_CONFIG
-	$(SED) "s,prefix=/usr,prefix=$(STAGING_DIR)/usr," $(STAGING_DIR)/usr/bin/dvdread-config
-endef
-
-LIBDVDREAD_POST_INSTALL_STAGING_HOOKS += LIBDVDREAD_STAGING_FIXUP_DVDREAD_CONFIG
+LIBDVDREAD_CONFIG_SCRIPTS = dvdread-config
 
 $(eval $(autotools-package))
diff --git a/package/libgcrypt/libgcrypt.mk b/package/libgcrypt/libgcrypt.mk
index b0a8a73..b7c2742 100644
--- a/package/libgcrypt/libgcrypt.mk
+++ b/package/libgcrypt/libgcrypt.mk
@@ -11,6 +11,7 @@ LIBGCRYPT_LICENSE_FILES = COPYING.LIB
 LIBGCRYPT_SITE = ftp://ftp.gnupg.org/gcrypt/libgcrypt
 LIBGCRYPT_INSTALL_STAGING = YES
 LIBGCRYPT_DEPENDENCIES = libgpg-error
+LIBGCRYPT_CONFIG_SCRIPTS = libgcrypt-config
 
 LIBGCRYPT_CONF_ENV = \
 	ac_cv_sys_symbol_underscore=no
@@ -25,13 +26,4 @@ endef
 
 LIBGCRYPT_POST_PATCH_HOOKS += LIBGCRYPT_DISABLE_TESTS
 
-define LIBGCRYPT_STAGING_LIBGCRYPT_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		$(STAGING_DIR)/usr/bin/libgcrypt-config
-endef
-
-LIBGCRYPT_POST_INSTALL_STAGING_HOOKS += LIBGCRYPT_STAGING_LIBGCRYPT_CONFIG_FIXUP
-
-
 $(eval $(autotools-package))
diff --git a/package/libmcrypt/libmcrypt.mk b/package/libmcrypt/libmcrypt.mk
index a03c892..b67b1c7 100644
--- a/package/libmcrypt/libmcrypt.mk
+++ b/package/libmcrypt/libmcrypt.mk
@@ -10,13 +10,6 @@ LIBMCRYPT_AUTORECONF = YES
 LIBMCRYPT_INSTALL_STAGING = YES
 LIBMCRYPT_LICENSE = LGPLv2.1
 LIBMCRYPT_LICENSE_FILES = COPYING.LIB
-
-define LIBMCRYPT_STAGING_LIBMCRYPT_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		$(STAGING_DIR)/usr/bin/libmcrypt-config
-endef
-
-LIBMCRYPT_POST_INSTALL_STAGING_HOOKS += LIBMCRYPT_STAGING_LIBMCRYPT_CONFIG_FIXUP
+LIBMCRYPT_CONFIG_SCRIPTS = libmcrypt-config
 
 $(eval $(autotools-package))
diff --git a/package/libnspr/libnspr.mk b/package/libnspr/libnspr.mk
index a5307fa..5b1333d 100644
--- a/package/libnspr/libnspr.mk
+++ b/package/libnspr/libnspr.mk
@@ -8,6 +8,8 @@ LIBNSPR_SOURCE = nspr-$(LIBNSPR_VERSION).tar.gz
 LIBNSPR_SITE = https://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v$(LIBNSPR_VERSION)/src/
 LIBNSPR_SUBDIR = mozilla/nsprpub
 LIBNSPR_INSTALL_STAGING = YES
+LIBNSPR_CONFIG_SCRIPTS = nspr-config
+
 # Set the host CFLAGS and LDFLAGS so NSPR does not guess wrongly
 LIBNSPR_CONF_ENV = HOST_CFLAGS="-g -O2" \
 		   HOST_LDFLAGS="-lc"
@@ -24,12 +26,4 @@ LIBNSPR_CONF_OPT += --disable-thumb2
 endif
 endif
 
-define LIBNSPR_STAGING_LIBNSPR_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		$(STAGING_DIR)/usr/bin/nspr-config
-endef
-
-LIBNSPR_POST_INSTALL_STAGING_HOOKS += LIBNSPR_STAGING_LIBNSPR_CONFIG_FIXUP
-
 $(eval $(autotools-package))
diff --git a/package/libusb-compat/libusb-compat.mk b/package/libusb-compat/libusb-compat.mk
index 848c705..9551dfe 100644
--- a/package/libusb-compat/libusb-compat.mk
+++ b/package/libusb-compat/libusb-compat.mk
@@ -8,14 +8,7 @@ LIBUSB_COMPAT_SOURCE = libusb-compat-$(LIBUSB_COMPAT_VERSION).tar.bz2
 LIBUSB_COMPAT_SITE = http://downloads.sourceforge.net/project/libusb/libusb-compat-0.1/libusb-compat-$(LIBUSB_COMPAT_VERSION)
 LIBUSB_COMPAT_DEPENDENCIES = host-pkgconf libusb
 LIBUSB_COMPAT_INSTALL_STAGING = YES
-
-define LIBUSB_COMPAT_FIXUP_CONFIG
-	$(SED) 's%prefix=/usr%prefix=$(STAGING_DIR)/usr%' \
-	    -e 's%exec_prefix=/usr%exec_prefix=$(STAGING_DIR)/usr%' \
-		$(STAGING_DIR)/usr/bin/libusb-config
-endef
-
-LIBUSB_COMPAT_POST_INSTALL_STAGING_HOOKS+=LIBUSB_COMPAT_FIXUP_CONFIG
+LIBUSB_COMPAT_CONFIG_SCRIPTS = libusb-config
 
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
diff --git a/package/libxml2/libxml2.mk b/package/libxml2/libxml2.mk
index 923a813..6a974ef 100644
--- a/package/libxml2/libxml2.mk
+++ b/package/libxml2/libxml2.mk
@@ -10,6 +10,7 @@ LIBXML2_INSTALL_STAGING = YES
 LIBXML2_AUTORECONF = YES
 LIBXML2_LICENSE = MIT
 LIBXML2_LICENSE_FILES = COPYING
+LIBXML2_CONFIG_SCRIPTS = xml2-config
 
 ifneq ($(BR2_LARGEFILE),y)
 LIBXML2_CONF_ENV = CC="$(TARGET_CC) $(TARGET_CFLAGS) -DNO_LARGEFILE_SOURCE"
@@ -17,13 +18,6 @@ endif
 
 LIBXML2_CONF_OPT = --with-gnu-ld --without-python --without-debug
 
-define LIBXML2_STAGING_LIBXML2_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" $(STAGING_DIR)/usr/bin/xml2-config
-	$(SED) "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" $(STAGING_DIR)/usr/bin/xml2-config
-endef
-
-LIBXML2_POST_INSTALL_STAGING_HOOKS += LIBXML2_STAGING_LIBXML2_CONFIG_FIXUP
-
 HOST_LIBXML2_DEPENDENCIES = host-pkgconf
 
 # mesa3d uses functions that are only available with debug
@@ -40,15 +34,6 @@ else
 HOST_LIBXML2_CONF_OPT += --without-python
 endif
 
-
-define LIBXML2_REMOVE_CONFIG_SCRIPTS
-	$(RM) -f $(TARGET_DIR)/usr/bin/xml2-config
-endef
-
-ifneq ($(BR2_HAVE_DEVFILES),y)
-LIBXML2_POST_INSTALL_TARGET_HOOKS += LIBXML2_REMOVE_CONFIG_SCRIPTS
-endif
-
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
 
diff --git a/package/ncurses/ncurses.mk b/package/ncurses/ncurses.mk
index 2cfd332..aa2b6bc 100644
--- a/package/ncurses/ncurses.mk
+++ b/package/ncurses/ncurses.mk
@@ -11,6 +11,7 @@ NCURSES_INSTALL_STAGING = YES
 NCURSES_DEPENDENCIES = host-ncurses
 NCURSES_LICENSE = MIT with advertising clause
 NCURSES_LICENSE_FILES = README
+NCURSES_CONFIG_SCRIPTS = ncurses5-config
 
 NCURSES_CONF_OPT = \
 	$(if $(BR2_PREFER_STATIC_LIB),--without-shared,--with-shared) \
@@ -37,13 +38,6 @@ define NCURSES_BUILD_CMDS
 	$(MAKE1) -C $(@D) DESTDIR=$(STAGING_DIR)
 endef
 
-define NCURSES_PATCH_NCURSES_CONFIG
-	$(SED) 's^prefix="^prefix="$(STAGING_DIR)^' \
-		$(STAGING_DIR)/usr/bin/ncurses5-config
-endef
-
-NCURSES_POST_INSTALL_STAGING_HOOKS += NCURSES_PATCH_NCURSES_CONFIG
-
 ifeq ($(BR2_HAVE_DEVFILES),y)
 define NCURSES_INSTALL_TARGET_DEVFILES
 	mkdir -p $(TARGET_DIR)/usr/include
diff --git a/package/neon/neon.mk b/package/neon/neon.mk
index 56db604..cec72f8 100644
--- a/package/neon/neon.mk
+++ b/package/neon/neon.mk
@@ -7,7 +7,7 @@ NEON_VERSION = 0.29.6
 NEON_SITE = http://www.webdav.org/neon/
 NEON_INSTALL_STAGING = YES
 NEON_CONF_OPT = --without-gssapi --disable-rpath
-
+NEON_CONFIG_SCRIPTS = neon-config
 NEON_DEPENDENCIES = host-pkgconf
 
 ifeq ($(BR2_PACKAGE_NEON_ZLIB),y)
@@ -44,20 +44,4 @@ ifeq ($(BR2_PACKAGE_NEON_NOXML),y)
 NEON_CONF_OPT += --disable-webdav
 endif
 
-define NEON_REMOVE_CONFIG_SCRIPTS
-	$(RM) -f $(TARGET_DIR)/usr/bin/neon-config
-endef
-
-ifneq ($(BR2_HAVE_DEVFILES),y)
-NEON_POST_INSTALL_TARGET_HOOKS += NEON_REMOVE_CONFIG_SCRIPTS
-endif
-
-define NEON_STAGING_NEON_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		$(STAGING_DIR)/usr/bin/neon-config
-endef
-
-NEON_POST_INSTALL_STAGING_HOOKS += NEON_STAGING_NEON_CONFIG_FIXUP
-
 $(eval $(autotools-package))
diff --git a/package/pcre/pcre.mk b/package/pcre/pcre.mk
index 9e27cb5..48266ff 100644
--- a/package/pcre/pcre.mk
+++ b/package/pcre/pcre.mk
@@ -9,26 +9,11 @@ PCRE_SITE = ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre
 PCRE_LICENSE = BSD-3c
 PCRE_LICENSE_FILES = LICENCE
 PCRE_INSTALL_STAGING = YES
+PCRE_CONFIG_SCRIPTS = pcre-config
 
 ifneq ($(BR2_INSTALL_LIBSTDCPP),y)
 # pcre will use the host g++ if a cross version isn't available
 PCRE_CONF_OPT = --disable-cpp
 endif
 
-define PCRE_STAGING_PCRE_CONFIG_FIXUP
-	$(SED) 's,^prefix=.*,prefix=$(STAGING_DIR)/usr,' \
-		-e 's,^exec_prefix=.*,exec_prefix=$(STAGING_DIR)/usr,' \
-		$(STAGING_DIR)/usr/bin/pcre-config
-endef
-
-PCRE_POST_INSTALL_STAGING_HOOKS += PCRE_STAGING_PCRE_CONFIG_FIXUP
-
-define PCRE_TARGET_REMOVE_PCRE_CONFIG
-	rm -f $(TARGET_DIR)/usr/bin/pcre-config
-endef
-
-ifneq ($(BR2_HAVE_DEVFILES),y)
-PCRE_POST_INSTALL_TARGET_HOOKS += PCRE_TARGET_REMOVE_PCRE_CONFIG
-endif
-
 $(eval $(autotools-package))
diff --git a/package/php/php.mk b/package/php/php.mk
index a1badab..c89b467 100644
--- a/package/php/php.mk
+++ b/package/php/php.mk
@@ -19,6 +19,7 @@ PHP_CONF_OPT =  --mandir=/usr/share/man \
 		--with-config-file-path=/etc \
 		--localstatedir=/var \
 		--disable-rpath
+PHP_CONFIG_SCRIPTS = php-config
 
 PHP_CFLAGS = $(TARGET_CFLAGS)
 
@@ -200,19 +201,9 @@ ifeq ($(BR2_PACKAGE_PHP_EXT_SNMP),y)
 	PHP_DEPENDENCIES += netsnmp
 endif
 
-# Fixup prefix= and exec_prefix= in php-config
-define PHP_FIXUP_PHP_CONFIG
-	$(SED) 's%^prefix="/usr"%prefix="$(STAGING_DIR)/usr"%' \
-		-e 's%^exec_prefix="/usr"%exec_prefix="$(STAGING_DIR)/usr"%' \
-		$(STAGING_DIR)/usr/bin/php-config
-endef
-
-PHP_POST_INSTALL_STAGING_HOOKS += PHP_FIXUP_PHP_CONFIG
-
 define PHP_INSTALL_FIXUP
 	rm -rf $(TARGET_DIR)/usr/lib/php
 	rm -f $(TARGET_DIR)/usr/bin/phpize
-	rm -f $(TARGET_DIR)/usr/bin/php-config
 	if [ ! -f $(TARGET_DIR)/etc/php.ini ]; then \
 		$(INSTALL) -m 0755  $(PHP_DIR)/php.ini-production \
 			$(TARGET_DIR)/etc/php.ini; \
-- 
1.7.9.5

[Buildroot] [PATCH 3/5] package: use <pkg>_CONFIG_SCRIPTS wherever possible

[Arnout Vandecappelle]

On 07/02/13 00:10, Thomas Petazzoni wrote:
> Use the <pkg>_CONFIG_SCRIPTS mechanism in all packages for which it
> does all what the package was doing. A few packages, like libxslt, are
> for now left out, since they need some additional fixup (for example a
> fixup of includedir).
>
> Signed-off-by: Thomas Petazzoni<thomas.petazzoni@free-electrons.com>

Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
  (visual inspection only)

-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

[Buildroot] [PATCH 4/5] package: use <pkg>_CONFIG_SCRIPTS in packages that used special handling

[Thomas Petazzoni]

The packages changed by this commit were not only changing prefix= and
exec_prefix= during their <foo>-config fixups, they were also changing
includedir= and/or libdir=. So, they could not be directly converted
to the new <pkg>_CONFIG_SCRIPTS infrastructure.

However, a careful analysis of their default <foo>-config shows that
includedir= and libdir= is defined relatively to either ${prefix} and
${exec_prefix}. Therefore, the manual fixing of includedir= and
libdir= is useless, and fixing prefix= and exec_prefix=, as done by
the <pkg>_CONFIG_SCRIPTS mechanism is sufficient.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 package/freetype/freetype.mk |   19 +------------------
 package/libpng/libpng.mk     |   20 +-------------------
 package/libxslt/libxslt.mk   |   18 +-----------------
 3 files changed, 3 insertions(+), 54 deletions(-)

diff --git a/package/freetype/freetype.mk b/package/freetype/freetype.mk
index be0f1a7..b08bbf7 100644
--- a/package/freetype/freetype.mk
+++ b/package/freetype/freetype.mk
@@ -14,26 +14,9 @@ FREETYPE_LICENSE_FILES = docs/FTL.TXT docs/GPLv2.TXT
 FREETYPE_DEPENDENCIES = host-pkgconf \
 	$(if $(BR2_PACKAGE_ZLIB),zlib) \
 	$(if $(BR2_PACKAGE_BZIP2),bzip2)
+FREETYPE_CONFIG_SCRIPTS = freetype-config
 
 HOST_FREETYPE_DEPENDENCIES = host-pkgconf
 
-define FREETYPE_FREETYPE_CONFIG_STAGING_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^includedir=.*,includedir=\'$(STAGING_DIR)/usr/include/freetype2\',g" \
-		-e "s,^libdir=.*,libdir=\'$(STAGING_DIR)/usr/lib\',g" \
-		$(STAGING_DIR)/usr/bin/freetype-config
-endef
-
-FREETYPE_POST_INSTALL_STAGING_HOOKS += FREETYPE_FREETYPE_CONFIG_STAGING_FIXUP
-
-define FREETYPE_FREETYPE_CONFIG_TARGET_REMOVE
-	rm -f $(TARGET_DIR)/usr/bin/freetype-config
-endef
-
-ifneq ($(BR2_HAVE_DEVFILES),y)
-FREETYPE_POST_INSTALL_TARGET_HOOKS += FREETYPE_FREETYPE_CONFIG_TARGET_REMOVE
-endif
-
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
diff --git a/package/libpng/libpng.mk b/package/libpng/libpng.mk
index d834876..2c18fde 100644
--- a/package/libpng/libpng.mk
+++ b/package/libpng/libpng.mk
@@ -12,25 +12,7 @@ LIBPNG_LICENSE = libpng license
 LIBPNG_LICENSE_FILES = LICENSE
 LIBPNG_INSTALL_STAGING = YES
 LIBPNG_DEPENDENCIES = host-pkgconf zlib
-
-define LIBPNG_STAGING_LIBPNG12_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" \
-		-e "s,^includedir=.*,includedir=\'$(STAGING_DIR)/usr/include/libpng$(LIBPNG_SERIES)\',g" \
-		-e "s,^libdir=.*,libdir=\'$(STAGING_DIR)/usr/lib\',g" \
-		$(STAGING_DIR)/usr/bin/libpng$(LIBPNG_SERIES)-config
-endef
-
-LIBPNG_POST_INSTALL_STAGING_HOOKS += LIBPNG_STAGING_LIBPNG12_CONFIG_FIXUP
-
-define LIBPNG_REMOVE_CONFIG_SCRIPTS
-	$(RM) -f $(TARGET_DIR)/usr/bin/libpng$(LIBPNG_SERIES)-config \
-		 $(TARGET_DIR)/usr/bin/libpng-config
-endef
-
-ifneq ($(BR2_HAVE_DEVFILES),y)
-LIBPNG_POST_INSTALL_TARGET_HOOKS += LIBPNG_REMOVE_CONFIG_SCRIPTS
-endif
+LIBPNG_CONFIG_SCRIPTS = libpng$(LIBPNG_SERIES)-config libpng-config
 
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
diff --git a/package/libxslt/libxslt.mk b/package/libxslt/libxslt.mk
index a35b955..b6c6aad 100644
--- a/package/libxslt/libxslt.mk
+++ b/package/libxslt/libxslt.mk
@@ -12,7 +12,7 @@ LIBXSLT_LICENSE_FILES = COPYING
 
 LIBXSLT_CONF_OPT = --with-gnu-ld --without-debug \
 		--without-python --with-libxml-prefix=$(STAGING_DIR)/usr/
-
+LIBXSLT_CONFIG_SCRIPTS = xslt-config
 LIBXSLT_DEPENDENCIES = libxml2
 
 # If we have enabled libgcrypt then use it, else disable crypto support.
@@ -27,21 +27,5 @@ HOST_LIBXSLT_CONF_OPT = --without-debug --without-python --without-crypto
 
 HOST_LIBXSLT_DEPENDENCIES = host-libxml2
 
-define LIBXSLT_XSLT_CONFIG_FIXUP
-	$(SED) "s,^prefix=.*,prefix=\'$(STAGING_DIR)/usr\',g" $(STAGING_DIR)/usr/bin/xslt-config
-	$(SED) "s,^exec_prefix=.*,exec_prefix=\'$(STAGING_DIR)/usr\',g" $(STAGING_DIR)/usr/bin/xslt-config
-	$(SED) "s,^includedir=.*,includedir=\'$(STAGING_DIR)/usr/include\',g" $(STAGING_DIR)/usr/bin/xslt-config
-endef
-
-LIBXSLT_POST_INSTALL_STAGING_HOOKS += LIBXSLT_XSLT_CONFIG_FIXUP
-
-define LIBXSLT_REMOVE_CONFIG_SCRIPTS
-	$(RM) -f $(TARGET_DIR)/usr/bin/xslt-config
-endef
-
-ifneq ($(BR2_HAVE_DEVFILES),y)
-LIBXSLT_POST_INSTALL_TARGET_HOOKS += LIBXSLT_REMOVE_CONFIG_SCRIPTS
-endif
-
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
-- 
1.7.9.5

[Buildroot] [PATCH 4/5] package: use <pkg>_CONFIG_SCRIPTS in packages that used special handling

[Samuel Martin]

2013/2/7 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
> The packages changed by this commit were not only changing prefix= and
> exec_prefix= during their <foo>-config fixups, they were also changing
> includedir= and/or libdir=. So, they could not be directly converted
> to the new <pkg>_CONFIG_SCRIPTS infrastructure.
>
> However, a careful analysis of their default <foo>-config shows that
> includedir= and libdir= is defined relatively to either ${prefix} and
> ${exec_prefix}. Therefore, the manual fixing of includedir= and
> libdir= is useless, and fixing prefix= and exec_prefix=, as done by
> the <pkg>_CONFIG_SCRIPTS mechanism is sufficient.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>


-- 
Samuel

[Buildroot] [PATCH 5/5] libgpg-error: use <pkg>_CONFIG_SCRIPTS

[Thomas Petazzoni]

libgpg-error installs a gpg-error-config script, but it wasn't fixed
up properly. Use the <pkg>_CONFIG_SCRIPTS to handle this.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 package/libgpg-error/libgpg-error.mk |    1 +
 1 file changed, 1 insertion(+)

diff --git a/package/libgpg-error/libgpg-error.mk b/package/libgpg-error/libgpg-error.mk
index 288165b..4114310 100644
--- a/package/libgpg-error/libgpg-error.mk
+++ b/package/libgpg-error/libgpg-error.mk
@@ -9,5 +9,6 @@ LIBGPG_ERROR_SITE = ftp://ftp.gnupg.org/gcrypt/libgpg-error
 LIBGPG_ERROR_LICENSE = LGPLv2.1+
 LIBGPG_ERROR_LICENSE_FILES = COPYING.LIB
 LIBGPG_ERROR_INSTALL_STAGING = YES
+LIBGPG_ERROR_CONFIG_SCRIPTS = gpg-error-config
 
 $(eval $(autotools-package))
-- 
1.7.9.5

[Buildroot] [PATCH 5/5] libgpg-error: use <pkg>_CONFIG_SCRIPTS

[Samuel Martin]

2013/2/7 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
> libgpg-error installs a gpg-error-config script, but it wasn't fixed
> up properly. Use the <pkg>_CONFIG_SCRIPTS to handle this.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>


-- 
Samuel

[Buildroot] Extend and use the <pkg>_CONFIG_FIXUP infra

[Thomas Petazzoni]

Peter,

In the following patch series, if we agree on "[PATCH 1/5] package:
rename <pkg>_CONFIG_FIXUP to <pkg>_CONFIG_SCRIPTS", then I believe it
would be better to take it for 2013.02 so that we don't have
<pkg>_CONFIG_FIXUP introduced in 2013.02 and then later a rename of
this new variable.

However, the other patches, 2 to 5, should probably not be taken for
2013.02, but only applied to -next once it opens.

Best regards,

Thomas

On Thu,  7 Feb 2013 00:10:13 +0100, Thomas Petazzoni wrote:
> Hello,
> 
> This patch series improves on the <pkg>_CONFIG_FIXUP work done by
> Stefan Fr?berg by:
> 
>  * Renaming the variable to <pkg>_CONFIG_SCRIPTS. I believe this is
>    needed, because we will not only "fixup" those files, but also
>    remove them from the target directory. Also, I don't think the
>    variable name should indicate what will happen to these files. It
>    should just indicate what those files are.
> 
>  * Extending the <pkg>_CONFIG_SCRIPTS handling to remove the config
>    scripts from the TARGET_DIR, unless BR2_HAVE_DEVFILES is set (even
>    though it is deprecated, it is still here).
> 
>  * Use <pkg>_CONFIG_SCRIPTS in a number of packages that were already
>    fixing manually their <foo>-config script and for which the new
>    infrastructure does exactly the same thing.
> 
>  * Use <pkg>_CONFIG_SCRIPTS in a number of packages that were doing a
>    bit more than the infrastructure: fixing the includedir and libdir
>    fields. A manual inspection of each of those packages shows that by
>    default, the includedir and libdir are described relatively to
>    prefix and exec_prefix, so fixing up those is sufficient, and this
>    is what the infrastructure does.
> 
>  * Use <pkg>_CONFIG_SCRIPTS to fix up gpg-error-config installed by
>    the libgpg-error package. This is done separately from the previous
>    patch, because libgpg-error was not previously doing any fix up of
>    its gpg-error-config script.
> 
> Best regards,
> 
> Thomas
> 
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot


-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com