* [Buildroot] simple(?) question about OpenWRT
@ 2013-02-08 3:30 W.P.
2013-02-08 8:33 ` Thomas Petazzoni
0 siblings, 1 reply; 3+ messages in thread
From: W.P. @ 2013-02-08 3:30 UTC (permalink / raw)
To: buildroot
Hi there,
I am posting here since OpenWRT build system looks buildroot based.
I'd like to know, how to DISABLE (using menus or something similar) ALL
the *_tables related stuff.
Cause if I disable (now) it, it builds *_tables modules anyway.
And in my application (firmware for MR3220, 4M flash) it is a problem (I
need BlueZ + Bash there :( ).
This device is NOT intended to work as router, only as AP + WDS.
(+AnyRemote host + internet radio).
For now I used (discouraged, I know) "hand crafting" .config file,
but this leads to "your config is out of sync" warning...
W.P.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] simple(?) question about OpenWRT
2013-02-08 3:30 [Buildroot] simple(?) question about OpenWRT W.P.
@ 2013-02-08 8:33 ` Thomas Petazzoni
2013-02-08 8:42 ` Yegor Yefremov
0 siblings, 1 reply; 3+ messages in thread
From: Thomas Petazzoni @ 2013-02-08 8:33 UTC (permalink / raw)
To: buildroot
Dear W.P.,
On Fri, 08 Feb 2013 04:30:10 +0100, W.P. wrote:
> I am posting here since OpenWRT build system looks buildroot based.
OpenWRT forked from Buildroot many, many years ago, and has now very
significantly diverged. This means that people knowing Buildroot
generally don't know much about OpenWRT, unless they learned it
separately.
Therefore, any support request related to OpenWRT is not really useful
on this list, and should instead be directed towards the OpenWRT
mailing list or IRC channel.
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] simple(?) question about OpenWRT
2013-02-08 8:33 ` Thomas Petazzoni
@ 2013-02-08 8:42 ` Yegor Yefremov
0 siblings, 0 replies; 3+ messages in thread
From: Yegor Yefremov @ 2013-02-08 8:42 UTC (permalink / raw)
To: buildroot
On Fri, Feb 8, 2013 at 9:33 AM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
> Dear W.P.,
>
> On Fri, 08 Feb 2013 04:30:10 +0100, W.P. wrote:
>
>> I am posting here since OpenWRT build system looks buildroot based.
>
> OpenWRT forked from Buildroot many, many years ago, and has now very
> significantly diverged. This means that people knowing Buildroot
> generally don't know much about OpenWRT, unless they learned it
> separately.
>
> Therefore, any support request related to OpenWRT is not really useful
> on this list, and should instead be directed towards the OpenWRT
> mailing list or IRC channel.
If you don't really need a web-interface, then you can stick to the
current Buildroot.
Yegor
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-02-08 8:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-02-08 3:30 [Buildroot] simple(?) question about OpenWRT W.P.
2013-02-08 8:33 ` Thomas Petazzoni
2013-02-08 8:42 ` Yegor Yefremov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox