* [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8
2013-05-09 20:31 [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8 Anders Darander
@ 2013-05-09 20:31 ` Anders Darander
2013-05-10 22:44 ` Arnout Vandecappelle
0 siblings, 1 reply; 6+ messages in thread
From: Anders Darander @ 2013-05-09 20:31 UTC (permalink / raw)
To: buildroot
From: Anders Darander <anders@chargestorm.se>
The kernel config here, is basically the default one from the TI kernel.
Thus, it's omap2plus_defconfig, which is rather generic.
As the beaglebone support is mainlined, there's no support for the old
board setup files, and the only supported run-time configuration is through
the device tree.
We're also setting the kernel headers to follow the 3.8 series.
Signed-off-by: Anders Darander <anders@chargestorm.se>
---
board/beaglebone/linux-3.2.9.config | 252 ----------------------------
board/beaglebone/linux-3.8.config | 315 +++++++++++++++++++++++++++++++++++
configs/beaglebone_defconfig | 22 +--
3 files changed, 321 insertions(+), 268 deletions(-)
delete mode 100644 board/beaglebone/linux-3.2.9.config
create mode 100644 board/beaglebone/linux-3.8.config
diff --git a/board/beaglebone/linux-3.2.9.config b/board/beaglebone/linux-3.2.9.config
deleted file mode 100644
index 4052f6e..0000000
--- a/board/beaglebone/linux-3.2.9.config
+++ /dev/null
@@ -1,252 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_DEFAULT_HOSTNAME="beaglebone"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_FHANDLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_ARCH_OMAP=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_SOC_OMAP3430 is not set
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_DEVKIT8000 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP3530_LV_SOM is not set
-# CONFIG_MACH_OMAP3_TORPEDO is not set
-# CONFIG_MACH_ENCORE is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RM680 is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_CM_T3517 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_IGEP0030 is not set
-# CONFIG_MACH_SBC3530 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_MACH_TI8168EVM is not set
-# CONFIG_MACH_TI8148EVM is not set
-# CONFIG_MACH_AM335XIAEVM is not set
-CONFIG_OMAP3_EDMA=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_THUMB2_KERNEL=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_RFKILL_REGULATOR=m
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
-CONFIG_BMP085=m
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_93CX6=m
-CONFIG_SENSORS_LIS3_I2C=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_TI_CPSW=y
-CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AD714X=m
-CONFIG_INPUT_BMA150=m
-CONFIG_INPUT_MMA8450=m
-CONFIG_INPUT_MPU3050=m
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_KXTJ9=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_TWL4030_VIBRA=m
-CONFIG_INPUT_TWL6040_VIBRA=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_PCF8574=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_INPUT_ADXL34X=m
-CONFIG_INPUT_CMA3000=m
-CONFIG_INPUT_CMA3000_I2C=m
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=m
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_GENERIC_PWM=y
-CONFIG_DAVINCI_EHRPWM=y
-CONFIG_ECAP_PWM=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_MFD_TPS65217=y
-CONFIG_REGULATOR_DUMMY=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_HIDRAW=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_TI81XX_GLUE=y
-CONFIG_USB_TI_CPPI41_DMA_HW=y
-CONFIG_USB_ACM=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_PRUSS=m
-CONFIG_STAGING=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_SW_RING=y
-CONFIG_IIO_KFIFO_BUF=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_PM_DEVFREQ=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_FANOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_JTAG_ENABLE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/board/beaglebone/linux-3.8.config b/board/beaglebone/linux-3.8.config
new file mode 100644
index 0000000..7bf52ed
--- /dev/null
+++ b/board/beaglebone/linux-3.8.config
@@ -0,0 +1,315 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_OMAP=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX_DEBUG=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
+CONFIG_FPE_NWFPE=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_BT=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
+CONFIG_OMAP_INTERCONNECT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_OOPS=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_SENSORS_TSL2550=m
+CONFIG_SENSORS_LIS3_I2C=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_AHCI_PLATFORM=m
+# CONFIG_ATA_SFF is not set
+CONFIG_MD=y
+CONFIG_NETDEVICES=y
+CONFIG_KS8851=y
+CONFIG_KS8851_MLL=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_TI_CPSW=y
+CONFIG_SMSC_PHY=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=m
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_TWL4030=y
+CONFIG_W1=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_SENSORS_LM75=m
+CONFIG_THERMAL=y
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_PALMAS_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_TPS65217=y
+CONFIG_MFD_TPS65910=y
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL6040_CORE=y
+CONFIG_MFD_PALMAS=y
+CONFIG_MFD_PALMAS_GPADC=y
+CONFIG_MFD_PALMAS_PWM=y
+CONFIG_MFD_PALMAS_RESOURCE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_PALMAS=y
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_DRM=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_RFBI=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_PANEL_GENERIC_DPI=m
+CONFIG_PANEL_SHARP_LS037V7DW01=m
+CONFIG_PANEL_NEC_NL8048HL11_01B=m
+CONFIG_PANEL_TAAL=m
+CONFIG_PANEL_TPO_TD043MTEA1=m
+CONFIG_PANEL_ACX565AKM=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=m
+CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_DWC3=m
+CONFIG_USB_DWC3_DEBUG=y
+CONFIG_USB_DWC3_VERBOSE=y
+CONFIG_USB_MON=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_OMAP2PLUS=m
+CONFIG_USB_MUSB_AM35X=m
+CONFIG_USB_MUSB_DSPS=m
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_TEST=y
+CONFIG_OMAP_USB2=m
+CONFIG_OMAP_USB3=m
+CONFIG_OMAP_CONTROL_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_TWL4030_USB=m
+CONFIG_TWL6030_USB=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_PALMAS_USB=m
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_OMAP=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TWL4030=y
+CONFIG_RTC_DRV_PALMAS=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
+CONFIG_DMA_OMAP=y
+CONFIG_STAGING=y
+CONFIG_DRM_OMAP=y
+CONFIG_DRM_OMAP_NUM_CRTCS=3
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig
index 2177068..f80dd79 100644
--- a/configs/beaglebone_defconfig
+++ b/configs/beaglebone_defconfig
@@ -1,24 +1,14 @@
-# architecture
BR2_arm=y
BR2_cortex_a8=y
+BR2_KERNEL_HEADERS_3_8=y
BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-fpu=vfpv3 --with-float=hard"
# BR2_SOFT_FLOAT is not set
-
-# system
BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
# BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set
-
-# filesystem
BR2_TARGET_ROOTFS_EXT2=y
# BR2_TARGET_ROOTFS_TAR is not set
-
-# lock down headers to avoid breaking with new defaults
-BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.2.9"
-
-# bootloader
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="am335x_evm"
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
@@ -26,11 +16,11 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"
BR2_TARGET_UBOOT_FORMAT_IMG=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="MLO"
-
-# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git"
-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="linux-ti33x-psp-3.2-r5a+gitr09e9651bcf2ee8d86685f2a8075bc6557b1d3b91"
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.2.9.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.8.config"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-bone"
--
1.7.10.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8
2013-05-09 20:31 ` [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
@ 2013-05-10 22:44 ` Arnout Vandecappelle
0 siblings, 0 replies; 6+ messages in thread
From: Arnout Vandecappelle @ 2013-05-10 22:44 UTC (permalink / raw)
To: buildroot
Hi Anders,
On 09/05/13 22:31, Anders Darander wrote:
> From: Anders Darander <anders@chargestorm.se>
>
> The kernel config here, is basically the default one from the TI kernel.
> Thus, it's omap2plus_defconfig, which is rather generic.
So why include a config in buildroot? If it's just the defconfig that
is already in the kernel tree, you can use it.
>
> As the beaglebone support is mainlined, there's no support for the old
> board setup files, and the only supported run-time configuration is through
> the device tree.
>
> We're also setting the kernel headers to follow the 3.8 series.
>
> Signed-off-by: Anders Darander <anders@chargestorm.se>
> ---
> board/beaglebone/linux-3.2.9.config | 252 ----------------------------
> board/beaglebone/linux-3.8.config | 315 +++++++++++++++++++++++++++++++++++
Please create your patches with the -M option to send-email or
format-patch, so that we can actually see the diff crossing the rename.
Otherwise it's pretty hard to review.
> configs/beaglebone_defconfig | 22 +--
> 3 files changed, 321 insertions(+), 268 deletions(-)
> delete mode 100644 board/beaglebone/linux-3.2.9.config
> create mode 100644 board/beaglebone/linux-3.8.config
>
[snip]
> diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig
> index 2177068..f80dd79 100644
> --- a/configs/beaglebone_defconfig
> +++ b/configs/beaglebone_defconfig
> @@ -1,24 +1,14 @@
> -# architecture
> BR2_arm=y
> BR2_cortex_a8=y
> +BR2_KERNEL_HEADERS_3_8=y
> BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-fpu=vfpv3 --with-float=hard"
> # BR2_SOFT_FLOAT is not set
> -
> -# system
Please don't remove these comments, they're useful. You can selectively
undo changes with 'git checkout -p configs/beaglebone_defconfig'.
> BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
> BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
> BR2_TARGET_GENERIC_GETTY_PORT="ttyO0"
> # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set
> -
> -# filesystem
> BR2_TARGET_ROOTFS_EXT2=y
> # BR2_TARGET_ROOTFS_TAR is not set
> -
> -# lock down headers to avoid breaking with new defaults
> -BR2_KERNEL_HEADERS_VERSION=y
> -BR2_DEFAULT_KERNEL_VERSION="3.2.9"
> -
> -# bootloader
> BR2_TARGET_UBOOT=y
> BR2_TARGET_UBOOT_BOARDNAME="am335x_evm"
> BR2_TARGET_UBOOT_CUSTOM_VERSION=y
> @@ -26,11 +16,11 @@ BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2013.04"
> BR2_TARGET_UBOOT_FORMAT_IMG=y
> BR2_TARGET_UBOOT_SPL=y
> BR2_TARGET_UBOOT_SPL_NAME="MLO"
> -
> -# kernel
> BR2_LINUX_KERNEL=y
> BR2_LINUX_KERNEL_CUSTOM_GIT=y
> -BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git"
> -BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="linux-ti33x-psp-3.2-r5a+gitr09e9651bcf2ee8d86685f2a8075bc6557b1d3b91"
> +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
> +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
Isn't there a tag you can clone from? That's much faster, because then
we can (usually) do a shallow clone.
Regards,
Arnout
> BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.2.9.config"
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/beaglebone/linux-3.8.config"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="am335x-bone"
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8
@ 2013-05-11 4:37 Anders Darander
2013-05-11 6:10 ` Arnout Vandecappelle
0 siblings, 1 reply; 6+ messages in thread
From: Anders Darander @ 2013-05-11 4:37 UTC (permalink / raw)
To: buildroot
Hi Arnout,
(Resending as I first sent from an unsubcribed email).
Arnout Vandecappelle <arnout@mind.be> wrote:
>On 09/05/13 22:31, Anders Darander wrote:
>> From: Anders Darander <anders@chargestorm.se>
>>
>> The kernel config here, is basically the default one from the TI
>kernel.
>> Thus, it's omap2plus_defconfig, which is rather generic.
>
> So why include a config in buildroot? If it's just the defconfig that
>is already in the kernel tree, you can use it.
Well, the intention was to reduce it in the next patch, just to show how it
was derived. Though, I'll squash them in the next revision.
>> As the beaglebone support is mainlined, there's no support for the
>old
>> board setup files, and the only supported run-time configuration is
>through
>> the device tree.
>>
>> We're also setting the kernel headers to follow the 3.8 series.
>>
>> Signed-off-by: Anders Darander <anders@chargestorm.se>
>> ---
>> board/beaglebone/linux-3.2.9.config | 252
>----------------------------
>> board/beaglebone/linux-3.8.config | 315
>+++++++++++++++++++++++++++++++++++
>
> Please create your patches with the -M option to send-email or
>format-patch, so that we can actually see the diff crossing the rename.
Hmm, strange, I was using -M, but I might have to tweak the threshold a
little bit. I'll look into that for the next revision.
>Otherwise it's pretty hard to review.
>
>> configs/beaglebone_defconfig | 22 +--
>> 3 files changed, 321 insertions(+), 268 deletions(-)
>> delete mode 100644 board/beaglebone/linux-3.2.9.config
>> create mode 100644 board/beaglebone/linux-3.8.config
>>
>[snip]
>> diff --git a/configs/beaglebone_defconfig
>b/configs/beaglebone_defconfig
>> index 2177068..f80dd79 100644
>> --- a/configs/beaglebone_defconfig
>> +++ b/configs/beaglebone_defconfig
>> @@ -1,24 +1,14 @@
>> -# architecture
>> BR2_arm=y
>> BR2_cortex_a8=y
>> +BR2_KERNEL_HEADERS_3_8=y
>> BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-fpu=vfpv3 --with-float=hard"
>> # BR2_SOFT_FLOAT is not set
>> -
>> -# system
>
>Please don't remove these comments, they're useful. You can selectively
Ok, then I guess that I should keep the old ordering, even though
savedefconfig have reordered some of them.?
>undo changes with 'git checkout -p configs/beaglebone_defconfig'.
>
>> BR2_LINUX_KERNEL=y
>> BR2_LINUX_KERNEL_CUSTOM_GIT=y
>>
>-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git"
>>
>-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="linux-ti33x-psp-3.2-r5a+gitr09e9651bcf2ee8d86685f2a8075bc6557b1d3b91"
>>
>+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://
git.ti.com/ti-linux-kernel/ti-linux-kernel.git"
>>
>+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
>
>Isn't there a tag you can clone from? That's much faster, because then
>we can (usually) do a shallow clone.
I'm not sure if there's a tag available in this case.
Ok, so tags preferred if they exists... Good to know, I'll check it and
change it if there's a tag.
The list few years I've mainly been working with another build system,
where SHA1's are preferred over tags for network-less building.
I'll come back with a new series in a couple of days.
Thanks for the feedback!
Cheers,
Anders
--
Anders Darander
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20130511/5d3d6858/attachment.html>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8
2013-05-11 4:37 [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
@ 2013-05-11 6:10 ` Arnout Vandecappelle
2013-05-11 12:41 ` Anders Darander
0 siblings, 1 reply; 6+ messages in thread
From: Arnout Vandecappelle @ 2013-05-11 6:10 UTC (permalink / raw)
To: buildroot
On 11/05/13 06:37, Anders Darander wrote:
> Hi Arnout,
>
> (Resending as I first sent from an unsubcribed email).
Yeah, the subscribed-only sending can get annoying.
BTW your re-sending lost the in-reply-to headers, which is unfortunate.
>
> Arnout Vandecappelle <arnout at mind.be <mailto:arnout@mind.be>> wrote:
> >On 09/05/13 22:31, Anders Darander wrote:
> >> From: Anders Darander <anders@chargestorm.se
> <mailto:anders@chargestorm.se>>
> >>
> >> The kernel config here, is basically the default one from the TI
> >kernel.
> >> Thus, it's omap2plus_defconfig, which is rather generic.
> >
> > So why include a config in buildroot? If it's just the defconfig that
> >is already in the kernel tree, you can use it.
>
> Well, the intention was to reduce it in the next patch, just to show how
> it was derived. Though, I'll squash them in the next revision.
Good reasoning, but it still makes reviewing more difficult :-)
>
> >> As the beaglebone support is mainlined, there's no support for the
> >old
> >> board setup files, and the only supported run-time configuration is
> >through
> >> the device tree.
> >>
> >> We're also setting the kernel headers to follow the 3.8 series.
> >>
> >> Signed-off-by: Anders Darander <anders@chargestorm.se
> <mailto:anders@chargestorm.se>>
> >> ---
> >> board/beaglebone/linux-3.2.9.config | 252
> >----------------------------
> >> board/beaglebone/linux-3.8.config | 315
> >+++++++++++++++++++++++++++++++++++
> >
> > Please create your patches with the -M option to send-email or
> >format-patch, so that we can actually see the diff crossing the rename.
>
> Hmm, strange, I was using -M, but I might have to tweak the threshold a
> little bit. I'll look into that for the next revision.
Ah, it's probably because you didn't squash in the next patch: now the
differences are too high to pass the threshold.
>
> >Otherwise it's pretty hard to review.
> >
> >> configs/beaglebone_defconfig | 22 +--
> >> 3 files changed, 321 insertions(+), 268 deletions(-)
> >> delete mode 100644 board/beaglebone/linux-3.2.9.config
> >> create mode 100644 board/beaglebone/linux-3.8.config
> >>
> >[snip]
> >> diff --git a/configs/beaglebone_defconfig
> >b/configs/beaglebone_defconfig
> >> index 2177068..f80dd79 100644
> >> --- a/configs/beaglebone_defconfig
> >> +++ b/configs/beaglebone_defconfig
> >> @@ -1,24 +1,14 @@
> >> -# architecture
> >> BR2_arm=y
> >> BR2_cortex_a8=y
> >> +BR2_KERNEL_HEADERS_3_8=y
> >> BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-fpu=vfpv3 --with-float=hard"
> >> # BR2_SOFT_FLOAT is not set
> >> -
> >> -# system
> >
> >Please don't remove these comments, they're useful. You can selectively
>
> Ok, then I guess that I should keep the old ordering, even though
> savedefconfig have reordered some of them.?
No, the new ordering is good - I do prefer to see things in the 'make
savedefconfig' order.
>
> >undo changes with 'git checkout -p configs/beaglebone_defconfig'.
> >
>
> >> BR2_LINUX_KERNEL=y
> >> BR2_LINUX_KERNEL_CUSTOM_GIT=y
> >>
> >-BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/koenkooi/linux.git <http://github.com/koenkooi/linux.git>"
> >>
> >-BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="linux-ti33x-psp-3.2-r5a+gitr09e9651bcf2ee8d86685f2a8075bc6557b1d3b91"
> >>
> >+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git <http://git.ti.com/ti-linux-kernel/ti-linux-kernel.git>"
> >>
> >+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="935f6c2f82056d538b528272e2bdbb5c08d69a58"
> >
> >Isn't there a tag you can clone from? That's much faster, because then
> >we can (usually) do a shallow clone.
>
> I'm not sure if there's a tag available in this case.
>
> Ok, so tags preferred if they exists... Good to know, I'll check it and
> change it if there's a tag.
>
> The list few years I've mainly been working with another build system,
> where SHA1's are preferred over tags for network-less building.
Do you know if there's a specific reason for that? The 'network-less'
doesn't make a difference because the tags are always equally available,
unless you clone/fetch with --no-tags.
Regards,
Arnout
> I'll come back with a new series in a couple of days.
>
> Thanks for the feedback!
>
> Cheers,
> Anders
>
> --
> Anders Darander
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8
2013-05-11 6:10 ` Arnout Vandecappelle
@ 2013-05-11 12:41 ` Anders Darander
2013-05-12 17:15 ` Arnout Vandecappelle
0 siblings, 1 reply; 6+ messages in thread
From: Anders Darander @ 2013-05-11 12:41 UTC (permalink / raw)
To: buildroot
On 11 May 2013 08:10, Arnout Vandecappelle <arnout@mind.be> wrote:
> On 11/05/13 06:37, Anders Darander wrote:
>
>> Hi Arnout,
>>
>> (Resending as I first sent from an unsubcribed email).
>>
>
> Yeah, the subscribed-only sending can get annoying.
>
> BTW your re-sending lost the in-reply-to headers, which is unfortunate.
Yes, that wan unfortunate side effect... (I was handling that mail from a
tablet, thus I was lacking a proper e-mail client for my work e-mail).
However, that e-mail is now subscribed, though without e-mail deliveries...
Hopefully the best of both worlds!
> Arnout Vandecappelle <arnout at mind.be <mailto:arnout@mind.be>> wrote:
>> >On 09/05/13 22:31, Anders Darander wrote:
>> >> From: Anders Darander <anders@chargestorm.se
>> <mailto:anders@chargestorm.se>**>
>>
>> >> diff --git a/configs/beaglebone_defconfig
>> >b/configs/beaglebone_**defconfig
>> >> index 2177068..f80dd79 100644
>> >> --- a/configs/beaglebone_defconfig
>> >> +++ b/configs/beaglebone_defconfig
>> >> @@ -1,24 +1,14 @@
>> >> -# architecture
>> >> BR2_arm=y
>> >> BR2_cortex_a8=y
>> >> +BR2_KERNEL_HEADERS_3_8=y
>> >> BR2_EXTRA_GCC_CONFIG_OPTIONS="**--with-fpu=vfpv3 --with-float=hard"
>> >> # BR2_SOFT_FLOAT is not set
>> >> -
>> >> -# system
>> >
>> >Please don't remove these comments, they're useful. You can selectively
>>
>> Ok, then I guess that I should keep the old ordering, even though
>> savedefconfig have reordered some of them.?
>>
>
> No, the new ordering is good - I do prefer to see things in the 'make
> savedefconfig' order.
>
Ok, good to know. Though I decided to keep the old version of those line,
and lock the kernel headers. Though, I'd also prefer to keep the
savedefconfig ordering.
Adding those comments automatically might be a good exercise for a rainy
day...
>undo changes with 'git checkout -p configs/beaglebone_defconfig'.
>> >
>>
>> >> BR2_LINUX_KERNEL=y
>> >> BR2_LINUX_KERNEL_CUSTOM_GIT=y
>> >>
>> >-BR2_LINUX_KERNEL_CUSTOM_GIT_**REPO_URL="git://github.com/**
>> koenkooi/linux.git <http://github.com/koenkooi/linux.git> <
>> http://github.com/koenkooi/**linux.git<http://github.com/koenkooi/linux.git>
>> >"
>> >>
>> >-BR2_LINUX_KERNEL_CUSTOM_GIT_**VERSION="linux-ti33x-psp-3.2-**r5a+**
>> gitr09e9651bcf2ee8d86685f2a807**5bc6557b1d3b91"
>> >>
>> >+BR2_LINUX_KERNEL_CUSTOM_GIT_**REPO_URL="git://git.ti.com/ti-**
>> linux-kernel/ti-linux-kernel.**git<http://git.ti.com/ti-linux-kernel/ti-linux-kernel.git><
>> http://git.ti.com/ti-linux-**kernel/ti-linux-kernel.git<http://git.ti.com/ti-linux-kernel/ti-linux-kernel.git>
>> >"
>>
>> >>
>> >+BR2_LINUX_KERNEL_CUSTOM_GIT_**VERSION="**
>> 935f6c2f82056d538b528272e2bdbb**5c08d69a58"
>> >
>> >Isn't there a tag you can clone from? That's much faster, because then
>> >we can (usually) do a shallow clone.
>>
>> I'm not sure if there's a tag available in this case.
>>
>
Unfortunsately no tags exists...
> Ok, so tags preferred if they exists... Good to know, I'll check it and
>> change it if there's a tag.
>>
>> The list few years I've mainly been working with another build system,
>> where SHA1's are preferred over tags for network-less building.
>>
>
> Do you know if there's a specific reason for that? The 'network-less'
> doesn't make a difference because the tags are always equally available,
> unless you clone/fetch with --no-tags.
>
Well, I just looked into it, and it seems that they (openmbedded and thus
Yocto Project) uses `git ls-remote` to resolve the tag name. I'm not quite
sure of the rationaly for that, though...
Cheers,
Anders
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20130511/1183f20c/attachment-0001.html>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8
2013-05-11 12:41 ` Anders Darander
@ 2013-05-12 17:15 ` Arnout Vandecappelle
0 siblings, 0 replies; 6+ messages in thread
From: Arnout Vandecappelle @ 2013-05-12 17:15 UTC (permalink / raw)
To: buildroot
On 11/05/13 14:41, Anders Darander wrote:
> On 11 May 2013 08:10, Arnout Vandecappelle <arnout@mind.be
> <mailto:arnout@mind.be>> wrote:
[snip]
> No, the new ordering is good - I do prefer to see things in the
> 'make savedefconfig' order.
>
>
> Ok, good to know. Though I decided to keep the old version of those line,
> and lock the kernel headers. Though, I'd also prefer to keep the
> savedefconfig ordering.
>
> Adding those comments automatically might be a good exercise for a rainy
> day...
Seems a pretty difficult task - savedefconfig strips everything that is
default, so how can it know which comments to keep and which to remove?
>
>
> >undo changes with 'git checkout -p configs/beaglebone_defconfig'.
> >
>
> >> BR2_LINUX_KERNEL=y
> >> BR2_LINUX_KERNEL_CUSTOM_GIT=y
> >>
> >-BR2_LINUX_KERNEL_CUSTOM_GIT___REPO_URL="git://github.com/__koenkooi/linux.git <http://github.com/koenkooi/linux.git> <http://github.com/koenkooi/__linux.git <http://github.com/koenkooi/linux.git>>"
> >>
> >-BR2_LINUX_KERNEL_CUSTOM_GIT___VERSION="linux-ti33x-psp-3.2-__r5a+__gitr09e9651bcf2ee8d86685f2a807__5bc6557b1d3b91"
> >>
> >+BR2_LINUX_KERNEL_CUSTOM_GIT___REPO_URL="git://git.ti.com/ti-__linux-kernel/ti-linux-kernel.__git <http://git.ti.com/ti-linux-kernel/ti-linux-kernel.git> <http://git.ti.com/ti-linux-__kernel/ti-linux-kernel.git <http://git.ti.com/ti-linux-kernel/ti-linux-kernel.git>>"
>
> >>
> >+BR2_LINUX_KERNEL_CUSTOM_GIT___VERSION="__935f6c2f82056d538b528272e2bdbb__5c08d69a58"
> >
> >Isn't there a tag you can clone from? That's much faster,
> because then
> >we can (usually) do a shallow clone.
>
> I'm not sure if there's a tag available in this case.
>
>
> Unfortunsately no tags exists...
How about using the ti2013.04.00 tag? It's based on 3.8.8 instead of
3.8.11, though.
> Ok, so tags preferred if they exists... Good to know, I'll check
> it and
> change it if there's a tag.
>
> The list few years I've mainly been working with another build
> system,
> where SHA1's are preferred over tags for network-less building.
>
>
> Do you know if there's a specific reason for that? The
> 'network-less' doesn't make a difference because the tags are always
> equally available, unless you clone/fetch with --no-tags.
>
>
> Well, I just looked into it, and it seems that they (openmbedded and thus
> Yocto Project) uses `git ls-remote` to resolve the tag name. I'm not
> quite sure of the rationaly for that, though...
Weird... Anyway, we don't have that issue in buildroot.
Regards,
Arnout
>
> Cheers,
> Anders
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-05-12 17:15 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-11 4:37 [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
2013-05-11 6:10 ` Arnout Vandecappelle
2013-05-11 12:41 ` Anders Darander
2013-05-12 17:15 ` Arnout Vandecappelle
-- strict thread matches above, loose matches on Subject: below --
2013-05-09 20:31 [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
2013-05-10 22:44 ` Arnout Vandecappelle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox