From: "Arnaud Rébillout" <rebillout@syscom.ch>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] tcping: new package
Date: Fri, 13 Sep 2013 11:27:06 +0200 [thread overview]
Message-ID: <5232DA6A.1090704@syscom.ch> (raw)
In-Reply-To: <87d2odnkg9.fsf@dell.be.48ers.dk>
Thanks for the recommandation ! I'll keep that in mind for the next patch !
On 09/13/2013 11:24 AM, Peter Korsgaard wrote:
>>>>>> "Arnaud" == Arnaud R?billout <rebillout@syscom.ch> writes:
> Hi,
>
> Arnaud> tcping does a TCP connect to the given ip/port combination. The user can
> Arnaud> specify a timeout in seconds. This is useful in shell scripts running in
> Arnaud> firewalled environments. Often SYNs are just being dropped by firewalls,
> Arnaud> thus connection establishment will be retried several times (for minutes)
> Arnaud> until a TCP timeout is reached. With tcping it is possible to check first
> Arnaud> if the desired port is reachable and then start connection establishment.
>
> Arnaud> http://www.linuxco.de/tcping/tcping.html
>
> Arnaud> Signed-off-by: Arnaud R?billout <rebillout@syscom.ch>
> Arnaud> ---
>
> Please clearly mark patch version and what you have changed to ease
> review. The way to do this is to add the revision after PATCH in subject
> (E.G. [PATCHv2]) and to write a small change long here under the ---
> line.
>
> Arnaud> package/Config.in | 1 +
> Arnaud> package/tcping/Config.in | 11 +++++++++++
> Arnaud> package/tcping/tcping.mk | 20 ++++++++++++++++++++
> Arnaud> 3 files changed, 32 insertions(+)
> Arnaud> create mode 100644 package/tcping/Config.in
> Arnaud> create mode 100644 package/tcping/tcping.mk
>
> Arnaud> diff --git a/package/Config.in b/package/Config.in
> Arnaud> index 2351839..fc1ec87 100644
> Arnaud> --- a/package/Config.in
> Arnaud> +++ b/package/Config.in
> Arnaud> @@ -854,6 +854,7 @@ source "package/squid/Config.in"
> Arnaud> source "package/strongswan/Config.in"
> Arnaud> source "package/stunnel/Config.in"
> Arnaud> source "package/tcpdump/Config.in"
> Arnaud> +source "package/tcping/Config.in"
> Arnaud> source "package/tcpreplay/Config.in"
> Arnaud> if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
> Arnaud> source "package/tftpd/Config.in"
> Arnaud> diff --git a/package/tcping/Config.in b/package/tcping/Config.in
> Arnaud> new file mode 100644
> Arnaud> index 0000000..93cf322
> Arnaud> --- /dev/null
> Arnaud> +++ b/package/tcping/Config.in
> Arnaud> @@ -0,0 +1,11 @@
> Arnaud> +config BR2_PACKAGE_TCPING
> Arnaud> + bool "tcping"
> Arnaud> + help
> Arnaud> + tcping does a TCP connect to the given ip/port combination. The user can
> Arnaud> + specify a timeout in seconds. This is useful in shell scripts running in
> Arnaud> + firewalled environments. Often SYNs are just being dropped by firewalls,
> Arnaud> + thus connection establishment will be retried several times (for minutes)
> Arnaud> + until a TCP timeout is reached. With tcping it is possible to check first
> Arnaud> + if the desired port is reachable and then start connection establishment.
> Arnaud> +
>
> The help lines are too long. Please wrap after ~column 70 so it fits
> into menuconfig with a normal 80char window.
>
> Arnaud> + http://www.linuxco.de/tcping/tcping.html
> Arnaud> diff --git a/package/tcping/tcping.mk b/package/tcping/tcping.mk
> Arnaud> new file mode 100644
> Arnaud> index 0000000..1472ad4
> Arnaud> --- /dev/null
> Arnaud> +++ b/package/tcping/tcping.mk
> Arnaud> @@ -0,0 +1,20 @@
> Arnaud> +################################################################################
> Arnaud> +#
> Arnaud> +# tcping
> Arnaud> +#
> Arnaud> +################################################################################
> Arnaud> +
> Arnaud> +TCPING_VERSION = 1.3.5
> Arnaud> +TCPING_SITE = http://www.linuxco.de/tcping
> Arnaud> +TCPING_LICENSE = GPLv3+
> Arnaud> +TCPING_LICENSE_FILES = LICENSE
> Arnaud> +
> Arnaud> +define TCPING_BUILD_CMDS
> Arnaud> + $(MAKE) CC="$(TARGET_CC)" CCFLAGS="$(TARGET_CFLAGS)" -C $(@D) tcping.linux
>
> You should also pass TARGET_LDFLAGS. As the Makefile is really simple I
> just added it to CCFLAGS.
>
> Committed with these minor fixes, thanks.
>
--
Arnaud R?billout
SYSCOM Instruments SA
rue de l'industrie 21
CH-1450 Sainte-Croix
Switzerland
Tel: +41 (0)24 455 44 11
next prev parent reply other threads:[~2013-09-13 9:27 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-11 15:07 [Buildroot] [PATCH] tcping: new package Arnaud Rébillout
2013-09-12 16:44 ` Thomas Petazzoni
2013-09-13 7:29 ` Arnaud Rébillout
2013-09-13 7:31 ` Arnaud Rébillout
2013-09-13 7:33 ` Arnaud Rébillout
2013-09-13 9:24 ` Peter Korsgaard
2013-09-13 9:27 ` Arnaud Rébillout [this message]
2013-09-13 9:39 ` Yegor Yefremov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5232DA6A.1090704@syscom.ch \
--to=rebillout@syscom.ch \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox