* [Buildroot] [buildroot 0001463]: build for i386/Geode fails
@ 2007-08-13 18:04 bugs at busybox.net
0 siblings, 0 replies; 5+ messages in thread
From: bugs at busybox.net @ 2007-08-13 18:04 UTC (permalink / raw)
To: buildroot
The following issue has been SUBMITTED.
======================================================================
http://busybox.net/bugs/view.php?id=1463
======================================================================
Reported By: Bob Keyes
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1463
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 08-13-2007 11:04 PDT
Last Modified: 08-13-2007 11:04 PDT
======================================================================
Summary: build for i386/Geode fails
Description:
Buildroot tries to build Linx kernel, but the architecture isn't set, so it
can't find the Makefile.
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
08-13-07 11:04 Bob Keyes New Issue
08-13-07 11:04 Bob Keyes Status new => assigned
08-13-07 11:04 Bob Keyes Assigned To => buildroot
======================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [buildroot 0001463]: build for i386/Geode fails
@ 2007-09-07 19:02 bugs at busybox.net
0 siblings, 0 replies; 5+ messages in thread
From: bugs at busybox.net @ 2007-09-07 19:02 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1463
======================================================================
Reported By: Bob Keyes
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1463
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 08-13-2007 11:04 PDT
Last Modified: 09-07-2007 12:02 PDT
======================================================================
Summary: build for i386/Geode fails
Description:
Buildroot tries to build Linx kernel, but the architecture isn't set, so it
can't find the Makefile.
======================================================================
----------------------------------------------------------------------
bernhardf - 09-07-07 12:02
----------------------------------------------------------------------
Please attach your br2.config and kernel.config for me to reproduce.
Issue History
Date Modified Username Field Change
======================================================================
08-13-07 11:04 Bob Keyes New Issue
08-13-07 11:04 Bob Keyes Status new => assigned
08-13-07 11:04 Bob Keyes Assigned To => buildroot
09-07-07 12:02 bernhardf Note Added: 0002733
======================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [buildroot 0001463]: build for i386/Geode fails
@ 2007-09-07 19:11 bugs at busybox.net
0 siblings, 0 replies; 5+ messages in thread
From: bugs at busybox.net @ 2007-09-07 19:11 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1463
======================================================================
Reported By: Bob Keyes
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1463
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 08-13-2007 11:04 PDT
Last Modified: 09-07-2007 12:11 PDT
======================================================================
Summary: build for i386/Geode fails
Description:
Buildroot tries to build Linx kernel, but the architecture isn't set, so it
can't find the Makefile.
======================================================================
----------------------------------------------------------------------
bernhardf - 09-07-07 12:02
----------------------------------------------------------------------
Please attach your br2.config and kernel.config for me to reproduce.
----------------------------------------------------------------------
bradmssw - 09-07-07 12:11
----------------------------------------------------------------------
This has been discussed in the past and is not limited to geode by any
means:
http://www.nabble.com/Problems-with-some-x86-Target-Architecture-Variants-p12385010.html
http://www.nabble.com/GCC---march%3Dgeode-doesn't-exist--t4108131.html
Issue History
Date Modified Username Field Change
======================================================================
08-13-07 11:04 Bob Keyes New Issue
08-13-07 11:04 Bob Keyes Status new => assigned
08-13-07 11:04 Bob Keyes Assigned To => buildroot
09-07-07 12:02 bernhardf Note Added: 0002733
09-07-07 12:11 bradmssw Note Added: 0002734
======================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [buildroot 0001463]: build for i386/Geode fails
@ 2007-10-10 6:48 bugs at busybox.net
0 siblings, 0 replies; 5+ messages in thread
From: bugs at busybox.net @ 2007-10-10 6:48 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1463
======================================================================
Reported By: Bob Keyes
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1463
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 08-13-2007 11:04 PDT
Last Modified: 10-09-2007 23:48 PDT
======================================================================
Summary: build for i386/Geode fails
Description:
Buildroot tries to build Linx kernel, but the architecture isn't set, so it
can't find the Makefile.
======================================================================
----------------------------------------------------------------------
bernhardf - 09-07-07 12:02
----------------------------------------------------------------------
Please attach your br2.config and kernel.config for me to reproduce.
----------------------------------------------------------------------
bradmssw - 09-07-07 12:11
----------------------------------------------------------------------
This has been discussed in the past and is not limited to geode by any
means:
http://www.nabble.com/Problems-with-some-x86-Target-Architecture-Variants-p12385010.html
http://www.nabble.com/GCC---march%3Dgeode-doesn't-exist--t4108131.html
----------------------------------------------------------------------
alejandro_liu - 10-09-07 23:48
----------------------------------------------------------------------
I am also experiencing the same problem. I am using snapshot: 2007-10-09
(latest at the time of this writing)
I have tested using Target Arch i386, if I change the arch variants to:
pentium pro, pentium MMX, pentium mobile, pentium2, pentium3, etc... they
all seem to fail to set the ARCH macro correctly.
Arch variants i386, i486, i586, i686 seem to work OK.
This is unrelated to the note that bradmssw mentions as this is even
before buildroot tries to compile anything at all.
Issue History
Date Modified Username Field Change
======================================================================
08-13-07 11:04 Bob Keyes New Issue
08-13-07 11:04 Bob Keyes Status new => assigned
08-13-07 11:04 Bob Keyes Assigned To => buildroot
09-07-07 12:02 bernhardf Note Added: 0002733
09-07-07 12:11 bradmssw Note Added: 0002734
10-09-07 23:48 alejandro_liu Note Added: 0002815
======================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [buildroot 0001463]: build for i386/Geode fails
@ 2007-10-10 7:07 bugs at busybox.net
0 siblings, 0 replies; 5+ messages in thread
From: bugs at busybox.net @ 2007-10-10 7:07 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1463
======================================================================
Reported By: Bob Keyes
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1463
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 08-13-2007 11:04 PDT
Last Modified: 10-10-2007 00:07 PDT
======================================================================
Summary: build for i386/Geode fails
Description:
Buildroot tries to build Linx kernel, but the architecture isn't set, so it
can't find the Makefile.
======================================================================
----------------------------------------------------------------------
bernhardf - 09-07-07 12:02
----------------------------------------------------------------------
Please attach your br2.config and kernel.config for me to reproduce.
----------------------------------------------------------------------
bradmssw - 09-07-07 12:11
----------------------------------------------------------------------
This has been discussed in the past and is not limited to geode by any
means:
http://www.nabble.com/Problems-with-some-x86-Target-Architecture-Variants-p12385010.html
http://www.nabble.com/GCC---march%3Dgeode-doesn't-exist--t4108131.html
----------------------------------------------------------------------
alejandro_liu - 10-10-07 00:07
----------------------------------------------------------------------
Hi,
I was having the same problems with snapshot 2007-10-09 (latest at the
time of this writing).
I can confirm that the patch
(http://www.nabble.com/Problems-with-some-x86-Target-Architecture-Variants-p12385010.html)
mentioned by bradmssw did solve my problem.
The issue can be recreated consistently by selecting the i386 architecture
and then selecting one of the un-supported architecture variants. (i.e.
geode or pentium2)
Issue History
Date Modified Username Field Change
======================================================================
08-13-07 11:04 Bob Keyes New Issue
08-13-07 11:04 Bob Keyes Status new => assigned
08-13-07 11:04 Bob Keyes Assigned To => buildroot
09-07-07 12:02 bernhardf Note Added: 0002733
09-07-07 12:11 bradmssw Note Added: 0002734
10-09-07 23:48 alejandro_liu Note Added: 0002815
10-10-07 00:03 alejandro_liu Note Deleted: 0002815
10-10-07 00:07 alejandro_liu Note Added: 0002816
======================================================================
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-10-10 7:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-07 19:02 [Buildroot] [buildroot 0001463]: build for i386/Geode fails bugs at busybox.net
-- strict thread matches above, loose matches on Subject: below --
2007-10-10 7:07 bugs at busybox.net
2007-10-10 6:48 bugs at busybox.net
2007-09-07 19:11 bugs at busybox.net
2007-08-13 18:04 bugs at busybox.net
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox