* [Buildroot] [PATCH v2] openobex: use sourceforge repository
@ 2013-10-24 12:02 Arnaud Aujon
2013-10-24 12:32 ` Arnout Vandecappelle
0 siblings, 1 reply; 3+ messages in thread
From: Arnaud Aujon @ 2013-10-24 12:02 UTC (permalink / raw)
To: buildroot
openobex releases are now available on sourceforge, add VERSION_MAJOR
to be able to bump it more easily if necessary.
Signed-off-by: Arnaud Aujon <arnaud.aujon@gmail.com>
---
Changes v1 -> v2: just add patch comment
---
package/openobex/openobex.mk | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/package/openobex/openobex.mk b/package/openobex/openobex.mk
index 7195a26..4f383c8 100644
--- a/package/openobex/openobex.mk
+++ b/package/openobex/openobex.mk
@@ -4,8 +4,10 @@
#
################################################################################
-OPENOBEX_VERSION = 1.5
-OPENOBEX_SITE = http://ftp.osuosl.org/pub/linux/bluetooth
+OPENOBEX_VERSION_MAJOR = 1.5
+OPENOBEX_VERSION = $(OPENOBEX_VERSION_MAJOR).0
+OPENOBEX_SOURCE = openobex-$(OPENOBEX_VERSION)-Source.zip
+OPENOBEX_SITE = http://downloads.sourceforge.net/project/openobex/openobex/$(OPENOBEX_VERSION_MAJOR)
# Libraries seems to be released under LGPLv2.1+,
# while other material is under GPLv2+.
OPENOBEX_LICENSE = GPLv2+/LGPLv2.1+
@@ -15,6 +17,12 @@ OPENOBEX_DEPENDENCIES = host-pkgconf
OPENOBEX_AUTORECONF = YES
OPENOBEX_INSTALL_STAGING = YES
+define OPENOBEX_EXTRACT_CMDS
++ unzip -d $(@D) $(DL_DIR)/$(OPENOBEX_SOURCE)
++ mv $(@D)/openobex-$(OPENOBEX_VERSION)-Source/* $(@D)
++ $(RM) -r $(@D)/openobex-$(OPENOBEX_VERSION)-Source
+endef
+
OPENOBEX_CONF_OPT += \
$(if $(BR2_ENABLE_DEBUG),--enable-debug) \
$(if $(BR2_PACKAGE_OPENOBEX_APPS),--enable-apps) \
--
1.8.3.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH v2] openobex: use sourceforge repository
2013-10-24 12:02 [Buildroot] [PATCH v2] openobex: use sourceforge repository Arnaud Aujon
@ 2013-10-24 12:32 ` Arnout Vandecappelle
2013-10-24 13:12 ` arnaud aujon
0 siblings, 1 reply; 3+ messages in thread
From: Arnout Vandecappelle @ 2013-10-24 12:32 UTC (permalink / raw)
To: buildroot
On 24/10/13 14:02, Arnaud Aujon wrote:
> openobex releases are now available on sourceforge, add VERSION_MAJOR
> to be able to bump it more easily if necessary.
Why sourceforge? The source is hosted on gitorious, so it would be
better to grab a tarball there I'd think. There's a tag for 1.5 so you
can get the tarball from
https://gitorious.org/openobex/mainline/archive/1.5.tar.gz
Regards,
Arnout
>
> Signed-off-by: Arnaud Aujon <arnaud.aujon@gmail.com>
> ---
> Changes v1 -> v2: just add patch comment
> ---
> package/openobex/openobex.mk | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/package/openobex/openobex.mk b/package/openobex/openobex.mk
> index 7195a26..4f383c8 100644
> --- a/package/openobex/openobex.mk
> +++ b/package/openobex/openobex.mk
> @@ -4,8 +4,10 @@
> #
> ################################################################################
>
> -OPENOBEX_VERSION = 1.5
> -OPENOBEX_SITE = http://ftp.osuosl.org/pub/linux/bluetooth
> +OPENOBEX_VERSION_MAJOR = 1.5
> +OPENOBEX_VERSION = $(OPENOBEX_VERSION_MAJOR).0
> +OPENOBEX_SOURCE = openobex-$(OPENOBEX_VERSION)-Source.zip
> +OPENOBEX_SITE = http://downloads.sourceforge.net/project/openobex/openobex/$(OPENOBEX_VERSION_MAJOR)
> # Libraries seems to be released under LGPLv2.1+,
> # while other material is under GPLv2+.
> OPENOBEX_LICENSE = GPLv2+/LGPLv2.1+
> @@ -15,6 +17,12 @@ OPENOBEX_DEPENDENCIES = host-pkgconf
> OPENOBEX_AUTORECONF = YES
> OPENOBEX_INSTALL_STAGING = YES
>
> +define OPENOBEX_EXTRACT_CMDS
> ++ unzip -d $(@D) $(DL_DIR)/$(OPENOBEX_SOURCE)
> ++ mv $(@D)/openobex-$(OPENOBEX_VERSION)-Source/* $(@D)
> ++ $(RM) -r $(@D)/openobex-$(OPENOBEX_VERSION)-Source
> +endef
> +
> OPENOBEX_CONF_OPT += \
> $(if $(BR2_ENABLE_DEBUG),--enable-debug) \
> $(if $(BR2_PACKAGE_OPENOBEX_APPS),--enable-apps) \
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH v2] openobex: use sourceforge repository
2013-10-24 12:32 ` Arnout Vandecappelle
@ 2013-10-24 13:12 ` arnaud aujon
0 siblings, 0 replies; 3+ messages in thread
From: arnaud aujon @ 2013-10-24 13:12 UTC (permalink / raw)
To: buildroot
I used sourceforge because on openobex gitorious wiki page, the release
chapter refers to sourceforge.
But I guess, as the development is done using gitorious it's better using
it.
I will update the patch to use gitorious.
Arnaud
2013/10/24 Arnout Vandecappelle <arnout@mind.be>
> On 24/10/13 14:02, Arnaud Aujon wrote:
>
>> openobex releases are now available on sourceforge, add VERSION_MAJOR
>> to be able to bump it more easily if necessary.
>>
>
> Why sourceforge? The source is hosted on gitorious, so it would be better
> to grab a tarball there I'd think. There's a tag for 1.5 so you can get the
> tarball from
> https://gitorious.org/**openobex/mainline/archive/1.5.**tar.gz<https://gitorious.org/openobex/mainline/archive/1.5.tar.gz>
>
> Regards,
> Arnout
>
>
>
>> Signed-off-by: Arnaud Aujon <arnaud.aujon@gmail.com>
>> ---
>> Changes v1 -> v2: just add patch comment
>> ---
>> package/openobex/openobex.mk | 12 ++++++++++--
>> 1 file changed, 10 insertions(+), 2 deletions(-)
>>
>> diff --git a/package/openobex/openobex.mk b/package/openobex/openobex.mk
>> index 7195a26..4f383c8 100644
>> --- a/package/openobex/openobex.mk
>> +++ b/package/openobex/openobex.mk
>> @@ -4,8 +4,10 @@
>> #
>> ##############################**##############################**
>> ####################
>>
>> -OPENOBEX_VERSION = 1.5
>> -OPENOBEX_SITE = http://ftp.osuosl.org/pub/**linux/bluetooth<http://ftp.osuosl.org/pub/linux/bluetooth>
>> +OPENOBEX_VERSION_MAJOR = 1.5
>> +OPENOBEX_VERSION = $(OPENOBEX_VERSION_MAJOR).0
>> +OPENOBEX_SOURCE = openobex-$(OPENOBEX_VERSION)-**Source.zip
>> +OPENOBEX_SITE = http://downloads.sourceforge.**
>> net/project/openobex/openobex/**$(OPENOBEX_VERSION_MAJOR)<http://downloads.sourceforge.net/project/openobex/openobex/$(OPENOBEX_VERSION_MAJOR)>
>> # Libraries seems to be released under LGPLv2.1+,
>> # while other material is under GPLv2+.
>> OPENOBEX_LICENSE = GPLv2+/LGPLv2.1+
>> @@ -15,6 +17,12 @@ OPENOBEX_DEPENDENCIES = host-pkgconf
>> OPENOBEX_AUTORECONF = YES
>> OPENOBEX_INSTALL_STAGING = YES
>>
>> +define OPENOBEX_EXTRACT_CMDS
>> ++ unzip -d $(@D) $(DL_DIR)/$(OPENOBEX_SOURCE)
>> ++ mv $(@D)/openobex-$(OPENOBEX_**VERSION)-Source/* $(@D)
>> ++ $(RM) -r $(@D)/openobex-$(OPENOBEX_**VERSION)-Source
>> +endef
>> +
>> OPENOBEX_CONF_OPT += \
>> $(if $(BR2_ENABLE_DEBUG),--enable-**debug) \
>> $(if $(BR2_PACKAGE_OPENOBEX_APPS),-**-enable-apps) \
>>
>>
>
> --
> Arnout Vandecappelle arnout at mind be
> Senior Embedded Software Architect +32-16-286500
> Essensium/Mind http://www.mind.be
> G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
> LinkedIn profile: http://www.linkedin.com/in/**arnoutvandecappelle<http://www.linkedin.com/in/arnoutvandecappelle>
> GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20131024/e94d8dfd/attachment-0001.html>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-10-24 13:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-24 12:02 [Buildroot] [PATCH v2] openobex: use sourceforge repository Arnaud Aujon
2013-10-24 12:32 ` Arnout Vandecappelle
2013-10-24 13:12 ` arnaud aujon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox