[Buildroot] dhclient and udhcpc

[Buildroot] dhclient and udhcpc

[Lijun QIN]

With buildroot-2011.05, "udhcpc  eth0" gets dynamic IP, but dhclient eth0
can not get anything.

 [root@(none) dhcp]# ifconfig  -a
eth0   Link encap:Ethernet  HWaddr 00:25:B3:08:20:2C
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:532
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:8

after dhclient eth0
  eth0  Link encap:Ethernet  HWaddr 00:25:B3:08:20:2C
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:532
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:8

Any idea ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20140221/6370e713/attachment.html>

[Buildroot] dhclient and udhcpc

[pl]

On 21/02/2014 18:52, Lijun QIN wrote:
> With buildroot-2011.05, "udhcpc  eth0" gets dynamic IP, but dhclient 
> eth0 can not get anything.
>
>  [root@(none) dhcp]# ifconfig  -a
> eth0   Link encap:Ethernet  HWaddr 00:25:B3:08:20:2C
>           BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:532
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>           Interrupt:8
>
> after dhclient eth0
>   eth0  Link encap:Ethernet  HWaddr 00:25:B3:08:20:2C
>           BROADCAST MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:532
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>           Interrupt:8
>
> Any idea ?
>
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

I am just a newbie on buildroot, but i think your description is too 
short, and your version of buildroot seems old.
How did you get buildroot and how did your configure it ?
What is the target ? Is there more traces ( ex in /var/log/messages ) ?

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20140221/8a36e813/attachment.html>