* [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage
@ 2014-06-15 16:59 Francois Perrad
2014-06-15 16:59 ` [Buildroot] [PATCH 2/2] perl-mojolicious: new package Francois Perrad
2014-06-16 18:45 ` [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage Arnout Vandecappelle
0 siblings, 2 replies; 5+ messages in thread
From: Francois Perrad @ 2014-06-15 16:59 UTC (permalink / raw)
To: buildroot
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
support/scripts/scancpan | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/support/scripts/scancpan b/support/scripts/scancpan
index d8723f3..bf0aaa5 100755
--- a/support/scripts/scancpan
+++ b/support/scripts/scancpan
@@ -577,6 +577,7 @@ while (my ($distname, $dist) = each %dist) {
mkdir $dirname unless -d $dirname;
if ($need_target{$distname} && ($force || !-f $cfgname)) {
my $abstract = $dist->{abstract};
+ my $homepage = $dist->{resources}->{homepage} || qq{https://metacpan.org/release/${distname}};
say qq{write ${cfgname}} unless $quiet;
open my $fh, q{>}, $cfgname;
say {$fh} qq{config BR2_PACKAGE_${brname}};
@@ -585,8 +586,10 @@ while (my ($distname, $dist) = each %dist) {
my $brdep = brname( fsname( $dep ) );
say {$fh} qq{\tselect BR2_PACKAGE_${brdep}};
}
- say {$fh} qq{\thelp} if $abstract;
+ say {$fh} qq{\thelp};
say {$fh} qq{\t ${abstract}} if $abstract;
+ say {$fh} qq{\t } if $abstract;
+ say {$fh} qq{\t ${homepage}};
close $fh;
}
if ($force || !-f $mkname) {
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 2/2] perl-mojolicious: new package
2014-06-15 16:59 [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage Francois Perrad
@ 2014-06-15 16:59 ` Francois Perrad
2014-06-16 20:58 ` Arnout Vandecappelle
2014-06-16 18:45 ` [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage Arnout Vandecappelle
1 sibling, 1 reply; 5+ messages in thread
From: Francois Perrad @ 2014-06-15 16:59 UTC (permalink / raw)
To: buildroot
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
package/Config.in | 1 +
package/perl-mojolicious/Config.in | 6 ++++++
package/perl-mojolicious/perl-mojolicious.mk | 13 +++++++++++++
3 files changed, 20 insertions(+)
create mode 100644 package/perl-mojolicious/Config.in
create mode 100644 package/perl-mojolicious/perl-mojolicious.mk
diff --git a/package/Config.in b/package/Config.in
index f43e985..5e16ffa 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -423,6 +423,7 @@ endif
source "package/perl/Config.in"
if BR2_PACKAGE_PERL
menu "Perl libraries/modules"
+source "package/perl-mojolicious/Config.in"
endmenu
endif
source "package/php/Config.in"
diff --git a/package/perl-mojolicious/Config.in b/package/perl-mojolicious/Config.in
new file mode 100644
index 0000000..8c9c25a
--- /dev/null
+++ b/package/perl-mojolicious/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_PERL_MOJOLICIOUS
+ bool "perl-mojolicious"
+ help
+ Real-time web framework
+
+ http://mojolicio.us
diff --git a/package/perl-mojolicious/perl-mojolicious.mk b/package/perl-mojolicious/perl-mojolicious.mk
new file mode 100644
index 0000000..e4ced7e
--- /dev/null
+++ b/package/perl-mojolicious/perl-mojolicious.mk
@@ -0,0 +1,13 @@
+################################################################################
+#
+# perl-mojolicious
+#
+################################################################################
+
+PERL_MOJOLICIOUS_VERSION = 5.07
+PERL_MOJOLICIOUS_SOURCE = Mojolicious-$(PERL_MOJOLICIOUS_VERSION).tar.gz
+PERL_MOJOLICIOUS_SITE = $(BR2_CPAN_MIRROR)/authors/id/S/SR/SRI/
+PERL_MOJOLICIOUS_DEPENDENCIES = perl
+PERL_MOJOLICIOUS_LICENSE = artistic_2
+
+$(eval $(perl-package))
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage
2014-06-15 16:59 [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage Francois Perrad
2014-06-15 16:59 ` [Buildroot] [PATCH 2/2] perl-mojolicious: new package Francois Perrad
@ 2014-06-16 18:45 ` Arnout Vandecappelle
2014-06-16 18:54 ` Arnout Vandecappelle
1 sibling, 1 reply; 5+ messages in thread
From: Arnout Vandecappelle @ 2014-06-16 18:45 UTC (permalink / raw)
To: buildroot
On 06/15/14 18:59, Francois Perrad wrote:
> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Regards,
Arnout
> ---
> support/scripts/scancpan | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/support/scripts/scancpan b/support/scripts/scancpan
> index d8723f3..bf0aaa5 100755
> --- a/support/scripts/scancpan
> +++ b/support/scripts/scancpan
> @@ -577,6 +577,7 @@ while (my ($distname, $dist) = each %dist) {
> mkdir $dirname unless -d $dirname;
> if ($need_target{$distname} && ($force || !-f $cfgname)) {
> my $abstract = $dist->{abstract};
> + my $homepage = $dist->{resources}->{homepage} || qq{https://metacpan.org/release/${distname}};
> say qq{write ${cfgname}} unless $quiet;
> open my $fh, q{>}, $cfgname;
> say {$fh} qq{config BR2_PACKAGE_${brname}};
> @@ -585,8 +586,10 @@ while (my ($distname, $dist) = each %dist) {
> my $brdep = brname( fsname( $dep ) );
> say {$fh} qq{\tselect BR2_PACKAGE_${brdep}};
> }
> - say {$fh} qq{\thelp} if $abstract;
> + say {$fh} qq{\thelp};
> say {$fh} qq{\t ${abstract}} if $abstract;
> + say {$fh} qq{\t } if $abstract;
> + say {$fh} qq{\t ${homepage}};
> close $fh;
> }
> if ($force || !-f $mkname) {
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage
2014-06-16 18:45 ` [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage Arnout Vandecappelle
@ 2014-06-16 18:54 ` Arnout Vandecappelle
0 siblings, 0 replies; 5+ messages in thread
From: Arnout Vandecappelle @ 2014-06-16 18:54 UTC (permalink / raw)
To: buildroot
On 06/16/14 20:45, Arnout Vandecappelle wrote:
> On 06/15/14 18:59, Francois Perrad wrote:
>> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
>
> Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Scratch that, I have a comment:
>
> Regards,
> Arnout
>
>> ---
>> support/scripts/scancpan | 5 ++++-
>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/support/scripts/scancpan b/support/scripts/scancpan
>> index d8723f3..bf0aaa5 100755
>> --- a/support/scripts/scancpan
>> +++ b/support/scripts/scancpan
>> @@ -577,6 +577,7 @@ while (my ($distname, $dist) = each %dist) {
>> mkdir $dirname unless -d $dirname;
>> if ($need_target{$distname} && ($force || !-f $cfgname)) {
>> my $abstract = $dist->{abstract};
>> + my $homepage = $dist->{resources}->{homepage} || qq{https://metacpan.org/release/${distname}};
>> say qq{write ${cfgname}} unless $quiet;
>> open my $fh, q{>}, $cfgname;
>> say {$fh} qq{config BR2_PACKAGE_${brname}};
>> @@ -585,8 +586,10 @@ while (my ($distname, $dist) = each %dist) {
>> my $brdep = brname( fsname( $dep ) );
>> say {$fh} qq{\tselect BR2_PACKAGE_${brdep}};
>> }
>> - say {$fh} qq{\thelp} if $abstract;
>> + say {$fh} qq{\thelp};
>> say {$fh} qq{\t ${abstract}} if $abstract;
>> + say {$fh} qq{\t } if $abstract;
There shouldn't be any leading whitespace here, so just make it:
say {$fh} qq{\t ${abstract}\n} if $abstract;
(if that is perlish enough).
>> + say {$fh} qq{\t ${homepage}};
>> close $fh;
>> }
>> if ($force || !-f $mkname) {
>>
>
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 2/2] perl-mojolicious: new package
2014-06-15 16:59 ` [Buildroot] [PATCH 2/2] perl-mojolicious: new package Francois Perrad
@ 2014-06-16 20:58 ` Arnout Vandecappelle
0 siblings, 0 replies; 5+ messages in thread
From: Arnout Vandecappelle @ 2014-06-16 20:58 UTC (permalink / raw)
To: buildroot
On 06/15/14 18:59, Francois Perrad wrote:
> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(build-tested)
However:
> ---
> package/Config.in | 1 +
> package/perl-mojolicious/Config.in | 6 ++++++
> package/perl-mojolicious/perl-mojolicious.mk | 13 +++++++++++++
> 3 files changed, 20 insertions(+)
> create mode 100644 package/perl-mojolicious/Config.in
> create mode 100644 package/perl-mojolicious/perl-mojolicious.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index f43e985..5e16ffa 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -423,6 +423,7 @@ endif
> source "package/perl/Config.in"
> if BR2_PACKAGE_PERL
> menu "Perl libraries/modules"
> +source "package/perl-mojolicious/Config.in"
This should be indented with a tab.
> endmenu
> endif
> source "package/php/Config.in"
> diff --git a/package/perl-mojolicious/Config.in b/package/perl-mojolicious/Config.in
> new file mode 100644
> index 0000000..8c9c25a
> --- /dev/null
> +++ b/package/perl-mojolicious/Config.in
> @@ -0,0 +1,6 @@
> +config BR2_PACKAGE_PERL_MOJOLICIOUS
> + bool "perl-mojolicious"
> + help
> + Real-time web framework
> +
Trailing whitespace.
> + http://mojolicio.us
> diff --git a/package/perl-mojolicious/perl-mojolicious.mk b/package/perl-mojolicious/perl-mojolicious.mk
> new file mode 100644
> index 0000000..e4ced7e
> --- /dev/null
> +++ b/package/perl-mojolicious/perl-mojolicious.mk
> @@ -0,0 +1,13 @@
> +################################################################################
> +#
> +# perl-mojolicious
> +#
> +################################################################################
> +
> +PERL_MOJOLICIOUS_VERSION = 5.07
> +PERL_MOJOLICIOUS_SOURCE = Mojolicious-$(PERL_MOJOLICIOUS_VERSION).tar.gz
> +PERL_MOJOLICIOUS_SITE = $(BR2_CPAN_MIRROR)/authors/id/S/SR/SRI/
> +PERL_MOJOLICIOUS_DEPENDENCIES = perl
Trailing whitespace - probably something to fix in the scancpan script.
Regards,
Arnout
> +PERL_MOJOLICIOUS_LICENSE = artistic_2
> +
> +$(eval $(perl-package))
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-06-16 20:58 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-06-15 16:59 [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage Francois Perrad
2014-06-15 16:59 ` [Buildroot] [PATCH 2/2] perl-mojolicious: new package Francois Perrad
2014-06-16 20:58 ` Arnout Vandecappelle
2014-06-16 18:45 ` [Buildroot] [PATCH 1/2] support/script/scancpan: populates Config.in with homepage Arnout Vandecappelle
2014-06-16 18:54 ` Arnout Vandecappelle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox