* [Buildroot] [PATCH] moarvm: new package
@ 2015-06-03 17:13 Francois Perrad
2015-06-03 23:06 ` Arnout Vandecappelle
0 siblings, 1 reply; 3+ messages in thread
From: Francois Perrad @ 2015-06-03 17:13 UTC (permalink / raw)
To: buildroot
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
package/Config.in | 1 +
package/moarvm/Config.in | 10 ++++++++
package/moarvm/moarvm.mk | 66 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 77 insertions(+)
create mode 100644 package/moarvm/Config.in
create mode 100644 package/moarvm/moarvm.mk
diff --git a/package/Config.in b/package/Config.in
index e0c2e2a..00c9ce3 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -499,6 +499,7 @@ menu "Lua libraries/modules"
source "package/xavante/Config.in"
endmenu
endif
+ source "package/moarvm/Config.in"
source "package/mono/Config.in"
source "package/nodejs/Config.in"
source "package/perl/Config.in"
diff --git a/package/moarvm/Config.in b/package/moarvm/Config.in
new file mode 100644
index 0000000..d4c9bbd
--- /dev/null
+++ b/package/moarvm/Config.in
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_MOARVM
+ bool "moarvm"
+ depends on BR2_PACKAGE_LIBATOMIC_ARCH_SUPPORTS
+ help
+ MoarVM (short for Metamodel On A Runtime Virtual Machine) is
+ a runtime built for the 6model object system. It is primarily aimed
+ at running NQP and Rakudo Perl 6, but should be able to serve as
+ a backend for any compilers built using the NQP compiler toolchain.
+
+ http://github.com/MoarVM/MoarVM
diff --git a/package/moarvm/moarvm.mk b/package/moarvm/moarvm.mk
new file mode 100644
index 0000000..08f30d7
--- /dev/null
+++ b/package/moarvm/moarvm.mk
@@ -0,0 +1,66 @@
+################################################################################
+#
+# moarvm
+#
+################################################################################
+
+MOARVM_VERSION = 2015.05
+MOARVM_SITE = $(call github,MoarVM,MoarVM,$(NQP_VERSION))
+MOARVM_LICENSE = Artistic-2.0
+MOARVM_LICENSE_FILES = Artistic2.txt
+MOARVM_INSTALL_STAGING = YES
+
+# the tarball does not contain the git submodules
+MOARVM_DYNASM_VERSION=12ace5e3a50238f69a3616e65b3e9ca188c41ac5
+MOARVM_DYNASM_SITE = $(call github,MoarVM,dynasm,$(MOARVM_DYNASM_VERSION))
+MOARVM_DYNASM_SOURCE = moarvm-dynasm-$(MOARVM_DYNASM_VERSION).tar.gz
+MOARVM_DYNCALL_VERSION=1dabd7c2fd438920502c85eaf9ca4212d722c4b5
+MOARVM_DYNCALL_SITE = $(call github,MoarVM,dyncall,$(MOARVM_DYNCALL_VERSION))
+MOARVM_DYNCALL_SOURCE = moarvm-dyncall-$(MOARVM_DYNCALL_VERSION).tar.gz
+MOARVM_LIBUV_VERSION=52ae456b0d666f6f4dbb7f52675f4f131855bd22
+MOARVM_LIBUV_SITE = $(call github,joyent,libuv,$(MOARVM_LIBUV_VERSION))
+MOARVM_LIBUV_SOURCE = moarvm-libuv-$(MOARVM_LIBUV_VERSION).tar.gz
+MOARVM_EXTRA_DOWNLOADS = \
+$(MOARVM_DYNASM_SITE)/$(MOARVM_DYNASM_SOURCE) \
+$(MOARVM_DYNCALL_SITE)/$(MOARVM_DYNCALL_SOURCE) \
+$(MOARVM_LIBUV_SITE)/$(MOARVM_LIBUV_SOURCE)
+
+define MOARVM_SUBMODULES_EXTRACT
+ $(call suitable-extractor,$(MOARVM_DYNASM_SOURCE)) $(DL_DIR)/$(MOARVM_DYNASM_SOURCE) | \
+ $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D)/3rdparty/dynasm $(TAR_OPTIONS) -
+ $(call suitable-extractor,$(MOARVM_DYNCALL_SOURCE)) $(DL_DIR)/$(MOARVM_DYNCALL_SOURCE) | \
+ $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D)/3rdparty/dyncall $(TAR_OPTIONS) -
+ $(call suitable-extractor,$(MOARVM_LIBUV_SOURCE)) $(DL_DIR)/$(MOARVM_LIBUV_SOURCE) | \
+ $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D)/3rdparty/libuv $(TAR_OPTIONS) -
+endef
+MOARVM_POST_EXTRACT_HOOKS += MOARVM_SUBMODULES_EXTRACT
+
+MOARVM_CONF_OPTS = \
+--build=$(GNU_HOST_NAME) \
+--host=$(GNU_TARGET_NAME) \
+--ar=$(TARGET_AR) \
+--cc=$(TARGET_CC) \
+--ld=$(TARGET_CC) \
+--prefix=/usr
+
+ifeq ($(BR2_ENDIAN),"BIG")
+MOARVM_CONF_OPTS += --big-endian
+endif
+
+define MOARVM_CONFIGURE_CMDS
+ (cd $(@D); perl Configure.pl $(MOARVM_CONF_OPTS))
+endef
+
+define MOARVM_BUILD_CMDS
+ $(MAKE) -C $(@D)
+endef
+
+define MOARVM_INSTALL_STAGING_CMDS
+ $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
+endef
+
+define MOARVM_INSTALL_TARGET_CMDS
+ $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(generic-package))
--
2.1.4
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH] moarvm: new package
2015-06-03 17:13 [Buildroot] [PATCH] moarvm: new package Francois Perrad
@ 2015-06-03 23:06 ` Arnout Vandecappelle
2015-06-04 19:56 ` François Perrad
0 siblings, 1 reply; 3+ messages in thread
From: Arnout Vandecappelle @ 2015-06-03 23:06 UTC (permalink / raw)
To: buildroot
On 06/03/15 19:13, Francois Perrad wrote:
> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> ---
> package/Config.in | 1 +
> package/moarvm/Config.in | 10 ++++++++
> package/moarvm/moarvm.mk | 66 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 77 insertions(+)
> create mode 100644 package/moarvm/Config.in
> create mode 100644 package/moarvm/moarvm.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index e0c2e2a..00c9ce3 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -499,6 +499,7 @@ menu "Lua libraries/modules"
> source "package/xavante/Config.in"
> endmenu
> endif
> + source "package/moarvm/Config.in"
> source "package/mono/Config.in"
> source "package/nodejs/Config.in"
> source "package/perl/Config.in"
> diff --git a/package/moarvm/Config.in b/package/moarvm/Config.in
> new file mode 100644
> index 0000000..d4c9bbd
> --- /dev/null
> +++ b/package/moarvm/Config.in
> @@ -0,0 +1,10 @@
> +config BR2_PACKAGE_MOARVM
> + bool "moarvm"
> + depends on BR2_PACKAGE_LIBATOMIC_ARCH_SUPPORTS
This seems to use libuv, and our libuv depends on threads, MMU, and !STATIC...
> + help
> + MoarVM (short for Metamodel On A Runtime Virtual Machine) is
> + a runtime built for the 6model object system. It is primarily aimed
> + at running NQP and Rakudo Perl 6, but should be able to serve as
> + a backend for any compilers built using the NQP compiler toolchain.
> +
> + http://github.com/MoarVM/MoarVM
Isn't it better to refer to http://moarvm.com instead?
> diff --git a/package/moarvm/moarvm.mk b/package/moarvm/moarvm.mk
> new file mode 100644
> index 0000000..08f30d7
> --- /dev/null
> +++ b/package/moarvm/moarvm.mk
> @@ -0,0 +1,66 @@
> +################################################################################
> +#
> +# moarvm
> +#
> +################################################################################
> +
> +MOARVM_VERSION = 2015.05
> +MOARVM_SITE = $(call github,MoarVM,MoarVM,$(NQP_VERSION))
If we use http://moarvm.com/releases/MoarVM-2015.05.tar.gz instead, there is no
need for all the extra downloads.
Otherwise, you also have to set MOARVM_SOURCE = 2015.05.tar.gz it seems. github
is weird.
> +MOARVM_LICENSE = Artistic-2.0
> +MOARVM_LICENSE_FILES = Artistic2.txt
> +MOARVM_INSTALL_STAGING = YES
> +
> +# the tarball does not contain the git submodules
> +MOARVM_DYNASM_VERSION=12ace5e3a50238f69a3616e65b3e9ca188c41ac5
> +MOARVM_DYNASM_SITE = $(call github,MoarVM,dynasm,$(MOARVM_DYNASM_VERSION))
> +MOARVM_DYNASM_SOURCE = moarvm-dynasm-$(MOARVM_DYNASM_VERSION).tar.gz
> +MOARVM_DYNCALL_VERSION=1dabd7c2fd438920502c85eaf9ca4212d722c4b5
> +MOARVM_DYNCALL_SITE = $(call github,MoarVM,dyncall,$(MOARVM_DYNCALL_VERSION))
> +MOARVM_DYNCALL_SOURCE = moarvm-dyncall-$(MOARVM_DYNCALL_VERSION).tar.gz
> +MOARVM_LIBUV_VERSION=52ae456b0d666f6f4dbb7f52675f4f131855bd22
> +MOARVM_LIBUV_SITE = $(call github,joyent,libuv,$(MOARVM_LIBUV_VERSION))
> +MOARVM_LIBUV_SOURCE = moarvm-libuv-$(MOARVM_LIBUV_VERSION).tar.gz
> +MOARVM_EXTRA_DOWNLOADS = \
> +$(MOARVM_DYNASM_SITE)/$(MOARVM_DYNASM_SOURCE) \
> +$(MOARVM_DYNCALL_SITE)/$(MOARVM_DYNCALL_SOURCE) \
> +$(MOARVM_LIBUV_SITE)/$(MOARVM_LIBUV_SOURCE)
> +
> +define MOARVM_SUBMODULES_EXTRACT
> + $(call suitable-extractor,$(MOARVM_DYNASM_SOURCE)) $(DL_DIR)/$(MOARVM_DYNASM_SOURCE) | \
> + $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D)/3rdparty/dynasm $(TAR_OPTIONS) -
> + $(call suitable-extractor,$(MOARVM_DYNCALL_SOURCE)) $(DL_DIR)/$(MOARVM_DYNCALL_SOURCE) | \
> + $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D)/3rdparty/dyncall $(TAR_OPTIONS) -
> + $(call suitable-extractor,$(MOARVM_LIBUV_SOURCE)) $(DL_DIR)/$(MOARVM_LIBUV_SOURCE) | \
> + $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D)/3rdparty/libuv $(TAR_OPTIONS) -
Can't we use buildroot's libuv? Same for libatomic_ops? I think yes, by passing
--has-libatomic_ops --has-libuv.
> +endef
> +MOARVM_POST_EXTRACT_HOOKS += MOARVM_SUBMODULES_EXTRACT
> +
> +MOARVM_CONF_OPTS = \
> +--build=$(GNU_HOST_NAME) \
Continuation lines should be indented with a tab.
> +--host=$(GNU_TARGET_NAME) \
> +--ar=$(TARGET_AR) \
> +--cc=$(TARGET_CC) \
Quotes needed for ccache
> +--ld=$(TARGET_CC) \
Same here
> +--prefix=/usr
Shouldn't --debug/--no-debug be set as well? And probably --static for static
builds.
Regards,
Arnout
> +
> +ifeq ($(BR2_ENDIAN),"BIG")
> +MOARVM_CONF_OPTS += --big-endian
> +endif
> +
> +define MOARVM_CONFIGURE_CMDS
> + (cd $(@D); perl Configure.pl $(MOARVM_CONF_OPTS))
> +endef
> +
> +define MOARVM_BUILD_CMDS
> + $(MAKE) -C $(@D)
> +endef
> +
> +define MOARVM_INSTALL_STAGING_CMDS
> + $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
> +endef
> +
> +define MOARVM_INSTALL_TARGET_CMDS
> + $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
> +endef
> +
> +$(eval $(generic-package))
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Buildroot] [PATCH] moarvm: new package
2015-06-03 23:06 ` Arnout Vandecappelle
@ 2015-06-04 19:56 ` François Perrad
0 siblings, 0 replies; 3+ messages in thread
From: François Perrad @ 2015-06-04 19:56 UTC (permalink / raw)
To: buildroot
2015-06-04 1:06 GMT+02:00 Arnout Vandecappelle <arnout@mind.be>:
> On 06/03/15 19:13, Francois Perrad wrote:
>> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
>> ---
>> package/Config.in | 1 +
>> package/moarvm/Config.in | 10 ++++++++
>> package/moarvm/moarvm.mk | 66 ++++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 77 insertions(+)
>> create mode 100644 package/moarvm/Config.in
>> create mode 100644 package/moarvm/moarvm.mk
>>
>> diff --git a/package/Config.in b/package/Config.in
>> index e0c2e2a..00c9ce3 100644
>> --- a/package/Config.in
>> +++ b/package/Config.in
>> @@ -499,6 +499,7 @@ menu "Lua libraries/modules"
>> source "package/xavante/Config.in"
>> endmenu
>> endif
>> + source "package/moarvm/Config.in"
>> source "package/mono/Config.in"
>> source "package/nodejs/Config.in"
>> source "package/perl/Config.in"
>> diff --git a/package/moarvm/Config.in b/package/moarvm/Config.in
>> new file mode 100644
>> index 0000000..d4c9bbd
>> --- /dev/null
>> +++ b/package/moarvm/Config.in
>> @@ -0,0 +1,10 @@
>> +config BR2_PACKAGE_MOARVM
>> + bool "moarvm"
>> + depends on BR2_PACKAGE_LIBATOMIC_ARCH_SUPPORTS
>
> This seems to use libuv, and our libuv depends on threads, MMU, and !STATIC...
OK for thread,
MMU is implied by BR2_PACKAGE_LIBATOMIC_ARCH_SUPPORTS
>
>> + help
>> + MoarVM (short for Metamodel On A Runtime Virtual Machine) is
>> + a runtime built for the 6model object system. It is primarily aimed
>> + at running NQP and Rakudo Perl 6, but should be able to serve as
>> + a backend for any compilers built using the NQP compiler toolchain.
>> +
>> + http://github.com/MoarVM/MoarVM
>
> Isn't it better to refer to http://moarvm.com instead?
OK.
>
>> diff --git a/package/moarvm/moarvm.mk b/package/moarvm/moarvm.mk
>> new file mode 100644
>> index 0000000..08f30d7
>> --- /dev/null
>> +++ b/package/moarvm/moarvm.mk
>> @@ -0,0 +1,66 @@
>> +################################################################################
>> +#
>> +# moarvm
>> +#
>> +################################################################################
>> +
>> +MOARVM_VERSION = 2015.05
>> +MOARVM_SITE = $(call github,MoarVM,MoarVM,$(NQP_VERSION))
>
> If we use http://moarvm.com/releases/MoarVM-2015.05.tar.gz instead, there is no
> need for all the extra downloads.
>
Definitely better.
> Otherwise, you also have to set MOARVM_SOURCE = 2015.05.tar.gz it seems. github
> is weird.
>
>
>> +MOARVM_LICENSE = Artistic-2.0
>> +MOARVM_LICENSE_FILES = Artistic2.txt
>> +MOARVM_INSTALL_STAGING = YES
>> +
>> +# the tarball does not contain the git submodules
>> +MOARVM_DYNASM_VERSION=12ace5e3a50238f69a3616e65b3e9ca188c41ac5
>> +MOARVM_DYNASM_SITE = $(call github,MoarVM,dynasm,$(MOARVM_DYNASM_VERSION))
>> +MOARVM_DYNASM_SOURCE = moarvm-dynasm-$(MOARVM_DYNASM_VERSION).tar.gz
>> +MOARVM_DYNCALL_VERSION=1dabd7c2fd438920502c85eaf9ca4212d722c4b5
>> +MOARVM_DYNCALL_SITE = $(call github,MoarVM,dyncall,$(MOARVM_DYNCALL_VERSION))
>> +MOARVM_DYNCALL_SOURCE = moarvm-dyncall-$(MOARVM_DYNCALL_VERSION).tar.gz
>> +MOARVM_LIBUV_VERSION=52ae456b0d666f6f4dbb7f52675f4f131855bd22
>> +MOARVM_LIBUV_SITE = $(call github,joyent,libuv,$(MOARVM_LIBUV_VERSION))
>> +MOARVM_LIBUV_SOURCE = moarvm-libuv-$(MOARVM_LIBUV_VERSION).tar.gz
>> +MOARVM_EXTRA_DOWNLOADS = \
>> +$(MOARVM_DYNASM_SITE)/$(MOARVM_DYNASM_SOURCE) \
>> +$(MOARVM_DYNCALL_SITE)/$(MOARVM_DYNCALL_SOURCE) \
>> +$(MOARVM_LIBUV_SITE)/$(MOARVM_LIBUV_SOURCE)
>> +
>> +define MOARVM_SUBMODULES_EXTRACT
>> + $(call suitable-extractor,$(MOARVM_DYNASM_SOURCE)) $(DL_DIR)/$(MOARVM_DYNASM_SOURCE) | \
>> + $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D)/3rdparty/dynasm $(TAR_OPTIONS) -
>> + $(call suitable-extractor,$(MOARVM_DYNCALL_SOURCE)) $(DL_DIR)/$(MOARVM_DYNCALL_SOURCE) | \
>> + $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D)/3rdparty/dyncall $(TAR_OPTIONS) -
>> + $(call suitable-extractor,$(MOARVM_LIBUV_SOURCE)) $(DL_DIR)/$(MOARVM_LIBUV_SOURCE) | \
>> + $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D)/3rdparty/libuv $(TAR_OPTIONS) -
>
> Can't we use buildroot's libuv? Same for libatomic_ops? I think yes, by passing
> --has-libatomic_ops --has-libuv.
>
These options work for native build, not for cross-compilation (custom
Configure script).
>> +endef
>> +MOARVM_POST_EXTRACT_HOOKS += MOARVM_SUBMODULES_EXTRACT
>> +
>> +MOARVM_CONF_OPTS = \
>> +--build=$(GNU_HOST_NAME) \
>
> Continuation lines should be indented with a tab.
OK
>
>> +--host=$(GNU_TARGET_NAME) \
>> +--ar=$(TARGET_AR) \
>> +--cc=$(TARGET_CC) \
>
> Quotes needed for ccache
>
OK
>> +--ld=$(TARGET_CC) \
>
> Same here
>
>> +--prefix=/usr
>
> Shouldn't --debug/--no-debug be set as well? And probably --static for static
> builds.
>
> Regards,
> Arnout
>
>> +
>> +ifeq ($(BR2_ENDIAN),"BIG")
>> +MOARVM_CONF_OPTS += --big-endian
>> +endif
>> +
>> +define MOARVM_CONFIGURE_CMDS
>> + (cd $(@D); perl Configure.pl $(MOARVM_CONF_OPTS))
>> +endef
>> +
>> +define MOARVM_BUILD_CMDS
>> + $(MAKE) -C $(@D)
>> +endef
>> +
>> +define MOARVM_INSTALL_STAGING_CMDS
>> + $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
>> +endef
>> +
>> +define MOARVM_INSTALL_TARGET_CMDS
>> + $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
>> +endef
>> +
>> +$(eval $(generic-package))
>>
>
>
> --
> Arnout Vandecappelle arnout at mind be
> Senior Embedded Software Architect +32-16-286500
> Essensium/Mind http://www.mind.be
> G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
> LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
> GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-06-04 19:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-06-03 17:13 [Buildroot] [PATCH] moarvm: new package Francois Perrad
2015-06-03 23:06 ` Arnout Vandecappelle
2015-06-04 19:56 ` François Perrad
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox