Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 0/5] Align library locations in target and staging
Date: Mon, 28 Mar 2016 01:08:32 +0200	[thread overview]
Message-ID: <56F867F0.1060204@mind.be> (raw)
In-Reply-To: <56F84813.6080302@gmail.com>

On 03/27/16 22:52, Romain Naour wrote:
> Hello Arnout, ThomasDS, All,
>
> Le 27/03/2016 22:39, Arnout Vandecappelle a ?crit :
>> On 02/12/16 20:20, Thomas De Schampheleire wrote:
>>> From: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
>>>
>>> As discussed on the Buildroot developer days, Buildroot installs some libraries
>>> in a different location in target than in staging. This is specifically seen for
>>> libstdc++ and libatomic.
>>>
>>> This patch series tackles that problem and performs related cleanup.
>>>
>>>
>>>
>>> Thomas De Schampheleire (5):
>>>     toolchain-external: blackfin: install FDPIC libraries also to staging
>>>     toolchain-external: remove unused calculation of ARCH_SUBDIR
>>>     toolchain-external: extract installation of gdbserver to separate
>>>       define
>>>     toolchain-external: align library locations in target and staging dir
>>>     toolchain-external: unify LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS
>>>
>>>    package/glibc/glibc.mk                             |  2 +-
>>>    toolchain/helpers.mk                               | 57 ++---------------
>>>    toolchain/toolchain-external/Config.in             |  3 +-
>>>    toolchain/toolchain-external/toolchain-external.mk | 71 ++++++++++------------
>>>    4 files changed, 40 insertions(+), 93 deletions(-)
>>>
>>
>>   I've also done a review and a test of the entire series. There is a bit of
>> reworking suggested by Romain in patch 3/5, the removal of -follow that I
>> suggest in patch 4/5, and I would like to re-instate the --sysroot check in
>> patch 2/5, but that's it.
>
> What do you think about moving the sysroot check to a helper function like I
> propose in this series ? (Which needs to be rebased after ThomasDS's series as well)

  That's a good solution, indeed. Actually, I had already applied those patches 
and missed that the check was now still done in the configure step but just as 
part of check_unusable_toolchain.

  Regards,
  Arnout

>
> http://patchwork.ozlabs.org/patch/576578/
> http://patchwork.ozlabs.org/patch/576580/
>
> Thoughts ?
>
> Best regards,
> Romain
>
>>
>>   ThomasDS, will you respin or do we apply and make changes afterwards?
>>
>>
>>   Regards,
>>   Arnout
>
>


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF

  reply	other threads:[~2016-03-27 23:08 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-12 19:20 [Buildroot] [PATCH 0/5] Align library locations in target and staging Thomas De Schampheleire
2016-02-12 19:20 ` [Buildroot] [PATCH 1/5] toolchain-external: blackfin: install FDPIC libraries also to staging Thomas De Schampheleire
2016-03-22 21:48   ` Romain Naour
2016-03-27 16:20   ` Arnout Vandecappelle
2016-04-25 21:00   ` Thomas Petazzoni
2016-02-12 19:20 ` [Buildroot] [PATCH 2/5] toolchain-external: remove unused calculation of ARCH_SUBDIR Thomas De Schampheleire
2016-03-22 21:53   ` Romain Naour
2016-03-27 20:34   ` Arnout Vandecappelle
2016-03-27 23:10     ` Arnout Vandecappelle
2016-04-21 21:30   ` Thomas Petazzoni
2016-02-12 19:20 ` [Buildroot] [PATCH 3/5] toolchain-external: extract installation of gdbserver to separate define Thomas De Schampheleire
2016-03-22 22:04   ` Romain Naour
2016-03-27 16:43     ` Arnout Vandecappelle
2016-04-25 21:02   ` Thomas Petazzoni
2016-02-12 19:20 ` [Buildroot] [PATCH 4/5] toolchain-external: align library locations in target and staging dir Thomas De Schampheleire
2016-03-22 22:53   ` Romain Naour
2016-03-27 20:34   ` Arnout Vandecappelle
2016-04-25 21:15     ` Thomas Petazzoni
2016-04-26 11:32       ` Thomas De Schampheleire
2016-04-25 21:08   ` Thomas Petazzoni
2016-02-12 19:20 ` [Buildroot] [PATCH 5/5] toolchain-external: unify LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS Thomas De Schampheleire
2016-03-22 22:58   ` Romain Naour
2016-03-27 20:36   ` Arnout Vandecappelle
2016-04-25 21:16   ` Thomas Petazzoni
2016-03-10  8:02 ` [Buildroot] [PATCH 0/5] Align library locations in target and staging Thomas De Schampheleire
2016-03-27 20:39 ` Arnout Vandecappelle
2016-03-27 20:52   ` Romain Naour
2016-03-27 23:08     ` Arnout Vandecappelle [this message]
2016-03-29 14:21   ` Thomas De Schampheleire
2016-03-29 14:33     ` Arnout Vandecappelle
2016-04-25 21:17 ` Thomas Petazzoni
2016-04-26  7:50   ` Thomas De Schampheleire
2016-04-26  8:28     ` Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56F867F0.1060204@mind.be \
    --to=arnout@mind.be \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox