* [Buildroot] [PATCH v2 2/2] binutils: remove support for version 2.23
2016-04-20 21:10 [Buildroot] [PATCH v2 1/2] binutils: remove 2.22 hash Thomas Petazzoni
@ 2016-04-20 21:10 ` Thomas Petazzoni
2016-04-21 22:13 ` Arnout Vandecappelle
2016-04-21 22:10 ` [Buildroot] [PATCH v2 1/2] binutils: remove 2.22 hash Arnout Vandecappelle
2016-04-22 13:06 ` Thomas Petazzoni
2 siblings, 1 reply; 5+ messages in thread
From: Thomas Petazzoni @ 2016-04-20 21:10 UTC (permalink / raw)
To: buildroot
Now that we have added support for the lastest binutils version 2.26,
it is time to remove the oldest version we currently support, 2.23, in
order to keep only 3 versions: 2.24, 2.25 and 2.26.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v1:
- Remove hash from the hash file, as noticed by Romain Naour.
- Add Config.in.legacy entry, as noticed by Romain Naour.
---
Config.in.legacy | 7 +
package/binutils/2.23.2/120-sh-conf.patch | 29 -
.../2.23.2/300-001_ld_makefile_patch.patch | 24 -
.../2.23.2/300-012_check_ldrunpath_length.patch | 21 -
package/binutils/2.23.2/500-sysroot.patch | 37 -
.../2.23.2/600-poison-system-directories.patch | 279 -------
.../binutils/2.23.2/900-xtensa-trampolines.patch | 846 ---------------------
.../901-xtensa-gas-first-frag-alignment.patch | 51 --
.../902-xtensa-gas-ld-diff-relocation-signed.patch | 133 ----
...ix-ld-segfault-when-linking-linux-modules.patch | 47 --
...-target-out-of-range-xtensa-ld-relaxation.patch | 79 --
...ines-search-code-for-conditional-branches.patch | 90 ---
...localized-symbol-refcounting-with-gc-sect.patch | 57 --
...x-gas-segfault-with-text-section-literals.patch | 56 --
...-xtensa-fix-signedness-of-gas-relocations.patch | 47 --
...15-xtensa-fix-.init-.fini-literals-moving.patch | 70 --
package/binutils/Config.in.host | 10 -
package/binutils/binutils.hash | 1 -
18 files changed, 7 insertions(+), 1877 deletions(-)
delete mode 100644 package/binutils/2.23.2/120-sh-conf.patch
delete mode 100644 package/binutils/2.23.2/300-001_ld_makefile_patch.patch
delete mode 100644 package/binutils/2.23.2/300-012_check_ldrunpath_length.patch
delete mode 100644 package/binutils/2.23.2/500-sysroot.patch
delete mode 100644 package/binutils/2.23.2/600-poison-system-directories.patch
delete mode 100644 package/binutils/2.23.2/900-xtensa-trampolines.patch
delete mode 100644 package/binutils/2.23.2/901-xtensa-gas-first-frag-alignment.patch
delete mode 100644 package/binutils/2.23.2/902-xtensa-gas-ld-diff-relocation-signed.patch
delete mode 100644 package/binutils/2.23.2/903-xtensa-fix-ld-segfault-when-linking-linux-modules.patch
delete mode 100644 package/binutils/2.23.2/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch
delete mode 100644 package/binutils/2.23.2/905-Fix-trampolines-search-code-for-conditional-branches.patch
delete mode 100644 package/binutils/2.23.2/911-xtensa-fix-localized-symbol-refcounting-with-gc-sect.patch
delete mode 100644 package/binutils/2.23.2/912-xtensa-fix-gas-segfault-with-text-section-literals.patch
delete mode 100644 package/binutils/2.23.2/914-xtensa-fix-signedness-of-gas-relocations.patch
delete mode 100644 package/binutils/2.23.2/915-xtensa-fix-.init-.fini-literals-moving.patch
diff --git a/Config.in.legacy b/Config.in.legacy
index ba3d94c..f52d5f8 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -145,6 +145,13 @@ endif
###############################################################################
comment "Legacy options removed in 2016.05"
+config BR2_BINUTILS_VERSION_2_23_X
+ bool "binutils 2.23 removed"
+ select BR2_LEGACY
+ help
+ Binutils 2.23 has been removed, using a newer version is
+ recommended.
+
config BR2_x86_i386
bool "x86 i386 support removed"
help
diff --git a/package/binutils/2.23.2/120-sh-conf.patch b/package/binutils/2.23.2/120-sh-conf.patch
deleted file mode 100644
index ea3d1b6..0000000
--- a/package/binutils/2.23.2/120-sh-conf.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-r10231 | lethal | 2005-05-02 09:58:00 -0400 (Mon, 02 May 2005) | 13 lines
-
-Likewise, binutils has no idea about any of these new targets either, so we
-fix that up too.. now we're able to actually build a real toolchain for
-sh2a_nofpu- and other more ineptly named toolchains (and yes, there are more
-inept targets than that one, really. Go look, I promise).
-
---- a/configure
-+++ b/configure
-@@ -1495,7 +1495,7 @@
- mips*-*-*)
- noconfigdirs="$noconfigdirs gprof"
- ;;
-- sh-*-* | sh64-*-*)
-+ sh*-*-* | sh64-*-*)
- case "${target}" in
- sh*-*-elf)
- ;;
---- a/configure.ac
-+++ b/configure.ac
-@@ -712,7 +712,7 @@
- mips*-*-*)
- noconfigdirs="$noconfigdirs gprof"
- ;;
-- sh-*-* | sh64-*-*)
-+ sh*-*-* | sh64-*-*)
- case "${target}" in
- sh*-*-elf)
- ;;
diff --git a/package/binutils/2.23.2/300-001_ld_makefile_patch.patch b/package/binutils/2.23.2/300-001_ld_makefile_patch.patch
deleted file mode 100644
index 5cb0f61..0000000
--- a/package/binutils/2.23.2/300-001_ld_makefile_patch.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.am binutils-2.17.50.0.17/ld/Makefile.am
---- binutils-2.17.50.0.17.oorig/ld/Makefile.am 2007-06-18 19:29:29.000000000 +0200
-+++ binutils-2.17.50.0.17/ld/Makefile.am 2007-06-25 10:00:36.000000000 +0200
-@@ -18,7 +18,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
-
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
-diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.in binutils-2.17.50.0.17/ld/Makefile.in
---- binutils-2.17.50.0.17.oorig/ld/Makefile.in 2007-06-18 19:29:29.000000000 +0200
-+++ binutils-2.17.50.0.17/ld/Makefile.in 2007-06-25 10:00:36.000000000 +0200
-@@ -287,7 +287,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include
diff --git a/package/binutils/2.23.2/300-012_check_ldrunpath_length.patch b/package/binutils/2.23.2/300-012_check_ldrunpath_length.patch
deleted file mode 100644
index df78310..0000000
--- a/package/binutils/2.23.2/300-012_check_ldrunpath_length.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-diff -Nura binutils-2.21.orig/ld/emultempl/elf32.em binutils-2.21/ld/emultempl/elf32.em
---- binutils-2.21.orig/ld/emultempl/elf32.em 2010-10-29 09:10:36.000000000 -0300
-+++ binutils-2.21/ld/emultempl/elf32.em 2010-12-10 09:26:56.746102724 -0300
-@@ -1270,6 +1270,8 @@
- && command_line.rpath == NULL)
- {
- lib_path = (const char *) getenv ("LD_RUN_PATH");
-+ if ((lib_path) && (strlen (lib_path) == 0))
-+ lib_path = NULL;
- if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- force))
- break;
-@@ -1497,6 +1499,8 @@
- rpath = command_line.rpath;
- if (rpath == NULL)
- rpath = (const char *) getenv ("LD_RUN_PATH");
-+ if ((rpath) && (strlen (rpath) == 0))
-+ rpath = NULL;
-
- for (abfd = link_info.input_bfds; abfd; abfd = abfd->link_next)
- if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
diff --git a/package/binutils/2.23.2/500-sysroot.patch b/package/binutils/2.23.2/500-sysroot.patch
deleted file mode 100644
index e49c795..0000000
--- a/package/binutils/2.23.2/500-sysroot.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-Signed-off-by: Sven Rebhan <odinshorse@googlemail.com>
-
-Always try to prepend the sysroot prefix to absolute filenames first.
-
-http://bugs.gentoo.org/275666
-http://sourceware.org/bugzilla/show_bug.cgi?id=10340
-
---- a/ld/ldfile.c
-+++ b/ld/ldfile.c
-@@ -308,18 +308,25 @@
- directory first. */
- if (! entry->flags.maybe_archive)
- {
-- if (entry->flags.sysrooted && IS_ABSOLUTE_PATH (entry->filename))
-+ /* For absolute pathnames, try to always open the file in the
-+ sysroot first. If this fails, try to open the file at the
-+ given location. */
-+ entry->flags.sysrooted = is_sysrooted_pathname (entry->filename);
-+ if (!entry->flags.sysrooted && IS_ABSOLUTE_PATH (entry->filename)
-+ && ld_sysroot)
- {
- char *name = concat (ld_sysroot, entry->filename,
- (const char *) NULL);
- if (ldfile_try_open_bfd (name, entry))
- {
- entry->filename = name;
-+ entry->flags.sysrooted = TRUE;
- return TRUE;
- }
- free (name);
- }
-- else if (ldfile_try_open_bfd (entry->filename, entry))
-+
-+ if (ldfile_try_open_bfd (entry->filename, entry))
- return TRUE;
-
- if (IS_ABSOLUTE_PATH (entry->filename))
diff --git a/package/binutils/2.23.2/600-poison-system-directories.patch b/package/binutils/2.23.2/600-poison-system-directories.patch
deleted file mode 100644
index 780e48e..0000000
--- a/package/binutils/2.23.2/600-poison-system-directories.patch
+++ /dev/null
@@ -1,279 +0,0 @@
-Patch adapted to binutils 2.23.2 and extended to use
-BR_COMPILER_PARANOID_UNSAFE_PATH by Thomas Petazzoni.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
-Upstream-Status: Inappropriate [distribution: codesourcery]
-
-Patch originally created by Mark Hatle, forward-ported to
-binutils 2.21 by Scott Garman.
-
-purpose: warn for uses of system directories when cross linking
-
-Code Merged from Sourcery G++ binutils 2.19 - 4.4-277
-
-2008-07-02 Joseph Myers <joseph@codesourcery.com>
-
- ld/
- * ld.h (args_type): Add error_poison_system_directories.
- * ld.texinfo (--error-poison-system-directories): Document.
- * ldfile.c (ldfile_add_library_path): Check
- command_line.error_poison_system_directories.
- * ldmain.c (main): Initialize
- command_line.error_poison_system_directories.
- * lexsup.c (enum option_values): Add
- OPTION_ERROR_POISON_SYSTEM_DIRECTORIES.
- (ld_options): Add --error-poison-system-directories.
- (parse_args): Handle new option.
-
-2007-06-13 Joseph Myers <joseph@codesourcery.com>
-
- ld/
- * config.in: Regenerate.
- * ld.h (args_type): Add poison_system_directories.
- * ld.texinfo (--no-poison-system-directories): Document.
- * ldfile.c (ldfile_add_library_path): Check
- command_line.poison_system_directories.
- * ldmain.c (main): Initialize
- command_line.poison_system_directories.
- * lexsup.c (enum option_values): Add
- OPTION_NO_POISON_SYSTEM_DIRECTORIES.
- (ld_options): Add --no-poison-system-directories.
- (parse_args): Handle new option.
-
-2007-04-20 Joseph Myers <joseph@codesourcery.com>
-
- Merge from Sourcery G++ binutils 2.17:
-
- 2007-03-20 Joseph Myers <joseph@codesourcery.com>
- Based on patch by Mark Hatle <mark.hatle@windriver.com>.
- ld/
- * configure.in (--enable-poison-system-directories): New option.
- * configure, config.in: Regenerate.
- * ldfile.c (ldfile_add_library_path): If
- ENABLE_POISON_SYSTEM_DIRECTORIES defined, warn for use of /lib,
- /usr/lib, /usr/local/lib or /usr/X11R6/lib.
-
-Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
-Signed-off-by: Scott Garman <scott.a.garman@intel.com>
-
-Index: b/ld/config.in
-===================================================================
---- a/ld/config.in
-+++ b/ld/config.in
-@@ -11,6 +11,9 @@
- language is requested. */
- #undef ENABLE_NLS
-
-+/* Define to warn for use of native system library directories */
-+#undef ENABLE_POISON_SYSTEM_DIRECTORIES
-+
- /* Additional extension a shared object might have. */
- #undef EXTRA_SHLIB_EXTENSION
-
-Index: b/ld/configure
-===================================================================
---- a/ld/configure
-+++ b/ld/configure
-@@ -773,6 +773,7 @@
- enable_targets
- enable_64_bit_bfd
- with_sysroot
-+enable_poison_system_directories
- enable_gold
- enable_got
- enable_werror
-@@ -1428,6 +1429,8 @@
- (and sometimes confusing) to the casual installer
- --enable-targets alternative target configurations
- --enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)
-+ --enable-poison-system-directories
-+ warn for use of native system library directories
- --enable-gold[=ARG] build gold [ARG={default,yes,no}]
- --enable-got=<type> GOT handling scheme (target, single, negative,
- multigot)
-@@ -4338,7 +4341,18 @@
- fi
-
-
-+# Check whether --enable-poison-system-directories was given.
-+if test "${enable_poison_system_directories+set}" = set; then :
-+ enableval=$enable_poison_system_directories;
-+else
-+ enable_poison_system_directories=no
-+fi
-+
-+if test "x${enable_poison_system_directories}" = "xyes"; then
-
-+$as_echo "#define ENABLE_POISON_SYSTEM_DIRECTORIES 1" >>confdefs.h
-+
-+fi
-
- # Check whether --enable-got was given.
- if test "${enable_got+set}" = set; then :
-Index: b/ld/configure.in
-===================================================================
---- a/ld/configure.in
-+++ b/ld/configure.in
-@@ -70,6 +70,16 @@
- AC_SUBST(TARGET_SYSTEM_ROOT)
- AC_SUBST(TARGET_SYSTEM_ROOT_DEFINE)
-
-+AC_ARG_ENABLE([poison-system-directories],
-+ AS_HELP_STRING([--enable-poison-system-directories],
-+ [warn for use of native system library directories]),,
-+ [enable_poison_system_directories=no])
-+if test "x${enable_poison_system_directories}" = "xyes"; then
-+ AC_DEFINE([ENABLE_POISON_SYSTEM_DIRECTORIES],
-+ [1],
-+ [Define to warn for use of native system library directories])
-+fi
-+
- dnl Use --enable-gold to decide if this linker should be the default.
- dnl "install_as_default" is set to false if gold is the default linker.
- dnl "installed_linker" is the installed BFD linker name.
-Index: b/ld/ldfile.c
-===================================================================
---- a/ld/ldfile.c
-+++ b/ld/ldfile.c
-@@ -116,6 +116,23 @@
- new_dirs->name = concat (ld_sysroot, name + 1, (const char *) NULL);
- else
- new_dirs->name = xstrdup (name);
-+
-+#ifdef ENABLE_POISON_SYSTEM_DIRECTORIES
-+ if (command_line.poison_system_directories
-+ && ((!strncmp (name, "/lib", 4))
-+ || (!strncmp (name, "/usr/lib", 8))
-+ || (!strncmp (name, "/usr/local/lib", 14))
-+ || (!strncmp (name, "/usr/X11R6/lib", 14))))
-+ {
-+ if (command_line.error_poison_system_directories)
-+ einfo (_("%X%P: error: library search path \"%s\" is unsafe for "
-+ "cross-compilation\n"), name);
-+ else
-+ einfo (_("%P: warning: library search path \"%s\" is unsafe for "
-+ "cross-compilation\n"), name);
-+ }
-+#endif
-+
- }
-
- /* Try to open a BFD for a lang_input_statement. */
-Index: b/ld/ld.h
-===================================================================
---- a/ld/ld.h
-+++ b/ld/ld.h
-@@ -203,6 +203,14 @@
- /* If TRUE we'll just print the default output on stdout. */
- bfd_boolean print_output_format;
-
-+ /* If TRUE (the default) warn for uses of system directories when
-+ cross linking. */
-+ bfd_boolean poison_system_directories;
-+
-+ /* If TRUE (default FALSE) give an error for uses of system
-+ directories when cross linking instead of a warning. */
-+ bfd_boolean error_poison_system_directories;
-+
- /* Big or little endian as set on command line. */
- enum endian_enum endian;
-
-Index: b/ld/ldmain.c
-===================================================================
---- a/ld/ldmain.c
-+++ b/ld/ldmain.c
-@@ -265,6 +265,8 @@
- command_line.warn_search_mismatch = TRUE;
- command_line.check_section_addresses = -1;
- command_line.disable_target_specific_optimizations = -1;
-+ command_line.poison_system_directories = TRUE;
-+ command_line.error_poison_system_directories = FALSE;
-
- /* We initialize DEMANGLING based on the environment variable
- COLLECT_NO_DEMANGLE. The gcc collect2 program will demangle the
-Index: b/ld/ld.texinfo
-===================================================================
---- a/ld/ld.texinfo
-+++ b/ld/ld.texinfo
-@@ -2154,6 +2154,18 @@
-
- Passing @code{none} for @var{style} disables the setting from any
- @code{--build-id} options earlier on the command line.
-+
-+ at kindex --no-poison-system-directories
-+ at item --no-poison-system-directories
-+Do not warn for @option{-L} options using system directories such as
-+ at file{/usr/lib} when cross linking. This option is intended for use
-+in chroot environments when such directories contain the correct
-+libraries for the target system rather than the host.
-+
-+ at kindex --error-poison-system-directories
-+ at item --error-poison-system-directories
-+Give an error instead of a warning for @option{-L} options using
-+system directories when cross linking.
- @end table
-
- @c man end
-Index: b/ld/lexsup.c
-===================================================================
---- a/ld/lexsup.c
-+++ b/ld/lexsup.c
-@@ -498,6 +498,14 @@
- TWO_DASHES },
- { {"wrap", required_argument, NULL, OPTION_WRAP},
- '\0', N_("SYMBOL"), N_("Use wrapper functions for SYMBOL"), TWO_DASHES },
-+ { {"no-poison-system-directories", no_argument, NULL,
-+ OPTION_NO_POISON_SYSTEM_DIRECTORIES},
-+ '\0', NULL, N_("Do not warn for -L options using system directories"),
-+ TWO_DASHES },
-+ { {"error-poison-system-directories", no_argument, NULL,
-+ OPTION_ERROR_POISON_SYSTEM_DIRECTORIES},
-+ '\0', NULL, N_("Give an error for -L options using system directories"),
-+ TWO_DASHES },
- };
-
- #define OPTION_COUNT ARRAY_SIZE (ld_options)
-@@ -510,6 +518,7 @@
- int ingroup = 0;
- char *default_dirlist = NULL;
- char *shortopts;
-+ char *BR_paranoid_env;
- struct option *longopts;
- struct option *really_longopts;
- int last_optind;
-@@ -1427,9 +1436,21 @@
- einfo (_("%P%X: --hash-size needs a numeric argument\n"));
- }
- break;
-+
-+ case OPTION_NO_POISON_SYSTEM_DIRECTORIES:
-+ command_line.poison_system_directories = FALSE;
-+ break;
-+
-+ case OPTION_ERROR_POISON_SYSTEM_DIRECTORIES:
-+ command_line.error_poison_system_directories = TRUE;
-+ break;
- }
- }
-
-+ BR_paranoid_env = getenv("BR_COMPILER_PARANOID_UNSAFE_PATH");
-+ if (BR_paranoid_env && strlen(BR_paranoid_env) > 0)
-+ command_line.error_poison_system_directories = TRUE;
-+
- while (ingroup)
- {
- lang_leave_group ();
-Index: b/ld/ldlex.h
-===================================================================
---- a/ld/ldlex.h
-+++ b/ld/ldlex.h
-@@ -136,6 +136,8 @@
- #endif /* ENABLE_PLUGINS */
- OPTION_DEFAULT_SCRIPT,
- OPTION_PRINT_OUTPUT_FORMAT,
-+ OPTION_NO_POISON_SYSTEM_DIRECTORIES,
-+ OPTION_ERROR_POISON_SYSTEM_DIRECTORIES,
- };
-
- /* The initial parser states. */
diff --git a/package/binutils/2.23.2/900-xtensa-trampolines.patch b/package/binutils/2.23.2/900-xtensa-trampolines.patch
deleted file mode 100644
index b5b934f..0000000
--- a/package/binutils/2.23.2/900-xtensa-trampolines.patch
+++ /dev/null
@@ -1,846 +0,0 @@
-From a82c7d9030b67a6a76a5403d0e1641f9e42141ac Mon Sep 17 00:00:00 2001
-From: David Weatherford <weath@cadence.com>
-Date: Fri, 21 Mar 2014 11:53:42 +0000
-Subject: [PATCH] Add support to the Xtensa target for creating trampolines for
- out-of-range branches.
-
- * tc-xtensa.c (xtensa_check_frag_count, xtensa_create_trampoline_frag)
- (xtensa_maybe_create_trampoline_frag, init_trampoline_frag)
- (find_trampoline_seg, search_trampolines, get_best_trampoline)
- (check_and_update_trampolines, add_jump_to_trampoline)
- (dump_trampolines): New function.
- (md_parse_option): Add cases for --[no-]trampolines options.
- (md_assemble, finish_vinsn, xtensa_end): Add call to
- xtensa_check_frag_count.
- (xg_assemble_vliw_tokens): Add call to
- xtensa_maybe_create_trampoline_frag.
- (xtensa_relax_frag): Relax fragments with RELAX_TRAMPOLINE state.
- (relax_frag_immed): Relax jump instructions that cannot reach its
- target.
- * tc-xtensa.h (xtensa_relax_statesE::RELAX_TRAMPOLINE): New relax
- state.
-
- * as.texinfo: Document --[no-]trampolines command-line options.
- * c-xtensa.texi: Document trampolines relaxation and command line
- options.
-
- * frags.c (get_frag_count, clear_frag_count): New function.
- (frag_alloc): Increment totalfrags counter.
- * frags.h (get_frag_count, clear_frag_count): New function.
-
- * all.exp: Add test for trampoline relaxation.
- * trampoline.d: Trampoline relaxation expected dump.
- * trampoline.s: Trampoline relaxation test source.
----
-Backported from: a82c7d9030b67a6a76a5403d0e1641f9e42141ac
-Changes to Changelog files are dropped.
-
- gas/config/tc-xtensa.c | 558 +++++++++++++++++++++++++++++++++-
- gas/config/tc-xtensa.h | 5 +
- gas/frags.c | 15 +
- gas/frags.h | 3 +
- gas/testsuite/gas/xtensa/all.exp | 1 +
- gas/testsuite/gas/xtensa/trampoline.d | 26 ++
- gas/testsuite/gas/xtensa/trampoline.s | 21 ++
- 11 files changed, 753 insertions(+), 2 deletions(-)
- create mode 100644 gas/testsuite/gas/xtensa/trampoline.d
- create mode 100644 gas/testsuite/gas/xtensa/trampoline.s
-
-diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c
-index fe8ec0f..ea23c96 100644
---- a/gas/config/tc-xtensa.c
-+++ b/gas/config/tc-xtensa.c
-@@ -468,6 +468,12 @@ static void xtensa_set_frag_assembly_state (fragS *);
- static void finish_vinsn (vliw_insn *);
- static bfd_boolean emit_single_op (TInsn *);
- static int total_frag_text_expansion (fragS *);
-+static bfd_boolean use_trampolines = TRUE;
-+static void xtensa_check_frag_count (void);
-+static void xtensa_create_trampoline_frag (bfd_boolean);
-+static void xtensa_maybe_create_trampoline_frag (void);
-+struct trampoline_frag;
-+static int init_trampoline_frag (struct trampoline_frag *);
-
- /* Alignment Functions. */
-
-@@ -520,6 +526,7 @@ static void tinsn_from_chars (TInsn *, char *, int);
- static void tinsn_immed_from_frag (TInsn *, fragS *, int);
- static int get_num_stack_text_bytes (IStack *);
- static int get_num_stack_literal_bytes (IStack *);
-+static bfd_boolean tinsn_to_slotbuf (xtensa_format, int, TInsn *, xtensa_insnbuf);
-
- /* vliw_insn functions. */
-
-@@ -687,7 +694,10 @@ enum
- option_prefer_l32r,
- option_prefer_const16,
-
-- option_target_hardware
-+ option_target_hardware,
-+
-+ option_trampolines,
-+ option_no_trampolines,
- };
-
- const char *md_shortopts = "";
-@@ -760,6 +770,9 @@ struct option md_longopts[] =
-
- { "target-hardware", required_argument, NULL, option_target_hardware },
-
-+ { "trampolines", no_argument, NULL, option_trampolines },
-+ { "no-trampolines", no_argument, NULL, option_no_trampolines },
-+
- { NULL, no_argument, NULL, 0 }
- };
-
-@@ -940,6 +953,14 @@ md_parse_option (int c, char *arg)
- directive_state[directive_transform] = FALSE;
- return 1;
-
-+ case option_trampolines:
-+ use_trampolines = TRUE;
-+ return 1;
-+
-+ case option_no_trampolines:
-+ use_trampolines = FALSE;
-+ return 1;
-+
- default:
- return 0;
- }
-@@ -963,7 +984,9 @@ Xtensa options:\n\
- flix bundles\n\
- --no-allow-flix neither allow hand-written nor generate\n\
- flix bundles\n\
-- --rename-section old=new Rename section 'old' to 'new'\n", stream);
-+ --rename-section old=new Rename section 'old' to 'new'\n\
-+ --[no-]trampolines [Do not] generate trampolines (jumps to jumps)\n\
-+ when jumps do not reach their targets\n", stream);
- }
-
- \f
-@@ -5568,6 +5591,8 @@ md_assemble (char *str)
-
- /* We've just emitted a new instruction so clear the list of labels. */
- xtensa_clear_insn_labels ();
-+
-+ xtensa_check_frag_count ();
- }
-
-
-@@ -6372,6 +6397,8 @@ finish_vinsn (vliw_insn *vinsn)
- xg_assemble_vliw_tokens (vinsn);
-
- xg_clear_vinsn (vinsn);
-+
-+ xtensa_check_frag_count ();
- }
-
-
-@@ -7140,6 +7167,7 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn)
- RELAX_UNREACHABLE,
- frag_now->fr_symbol, frag_now->fr_offset, NULL);
- xtensa_set_frag_assembly_state (frag_now);
-+ xtensa_maybe_create_trampoline_frag ();
- }
- else if (is_branch && do_align_targets ())
- {
-@@ -7222,9 +7250,164 @@ xtensa_end (void)
- xtensa_sanity_check ();
-
- xtensa_add_config_info ();
-+
-+ xtensa_check_frag_count ();
-+}
-+
-+
-+struct trampoline_frag
-+{
-+ struct trampoline_frag *next;
-+ bfd_boolean needs_jump_around;
-+ fragS *fragP;
-+ fixS *fixP;
-+};
-+
-+struct trampoline_seg
-+{
-+ struct trampoline_seg *next;
-+ asection *seg;
-+ struct trampoline_frag trampoline_list;
-+};
-+
-+static struct trampoline_seg trampoline_seg_list;
-+#define J_RANGE (128 * 1024)
-+
-+static int unreachable_count = 0;
-+
-+
-+static void
-+xtensa_maybe_create_trampoline_frag (void)
-+{
-+ if (!use_trampolines)
-+ return;
-+
-+ /* We create an area for possible trampolines every 10 unreachable frags.
-+ These are preferred over the ones not preceded by an unreachable frag,
-+ because we don't have to jump around them. This function is called after
-+ each RELAX_UNREACHABLE frag is created. */
-+
-+ if (++unreachable_count > 10)
-+ {
-+ xtensa_create_trampoline_frag (FALSE);
-+ clear_frag_count ();
-+ unreachable_count = 0;
-+ }
-+}
-+
-+static void
-+xtensa_check_frag_count (void)
-+{
-+ if (!use_trampolines || frag_now->tc_frag_data.is_no_transform)
-+ return;
-+
-+ /* We create an area for possible trampolines every 8000 frags or so. This
-+ is an estimate based on the max range of a "j" insn (+/-128K) divided
-+ by a typical frag byte count (16), minus a few for safety. This function
-+ is called after each source line is processed. */
-+
-+ if (get_frag_count () > 8000)
-+ {
-+ xtensa_create_trampoline_frag (TRUE);
-+ clear_frag_count ();
-+ unreachable_count = 0;
-+ }
-+}
-+
-+static xtensa_insnbuf trampoline_buf = NULL;
-+static xtensa_insnbuf trampoline_slotbuf = NULL;
-+
-+#define TRAMPOLINE_FRAG_SIZE 3000
-+
-+static void
-+xtensa_create_trampoline_frag (bfd_boolean needs_jump_around)
-+{
-+ /* Emit a frag where we can place intermediate jump instructions,
-+ in case we need to jump farther than 128K bytes.
-+ Each jump instruction takes three bytes.
-+ We allocate enough for 1000 trampolines in each frag.
-+ If that's not enough, oh well. */
-+
-+ struct trampoline_seg *ts = trampoline_seg_list.next;
-+ struct trampoline_frag *tf;
-+ char *varP;
-+ fragS *fragP;
-+ int size = TRAMPOLINE_FRAG_SIZE;
-+
-+ for ( ; ts; ts = ts->next)
-+ {
-+ if (ts->seg == now_seg)
-+ break;
-+ }
-+
-+ if (ts == NULL)
-+ {
-+ ts = (struct trampoline_seg *)xcalloc(sizeof (struct trampoline_seg), 1);
-+ ts->next = trampoline_seg_list.next;
-+ trampoline_seg_list.next = ts;
-+ ts->seg = now_seg;
-+ }
-+
-+ frag_wane (frag_now);
-+ frag_new (0);
-+ xtensa_set_frag_assembly_state (frag_now);
-+ varP = frag_var (rs_machine_dependent, size, size, RELAX_TRAMPOLINE, NULL, 0, NULL);
-+ fragP = (fragS *)(varP - SIZEOF_STRUCT_FRAG);
-+ if (trampoline_buf == NULL)
-+ {
-+ trampoline_buf = xtensa_insnbuf_alloc (xtensa_default_isa);
-+ trampoline_slotbuf = xtensa_insnbuf_alloc (xtensa_default_isa);
-+ }
-+ tf = (struct trampoline_frag *)xmalloc(sizeof (struct trampoline_frag));
-+ tf->next = ts->trampoline_list.next;
-+ ts->trampoline_list.next = tf;
-+ tf->needs_jump_around = needs_jump_around;
-+ tf->fragP = fragP;
-+ tf->fixP = NULL;
-+}
-+
-+
-+static struct trampoline_seg *
-+find_trampoline_seg (asection *seg)
-+{
-+ struct trampoline_seg *ts = trampoline_seg_list.next;
-+
-+ for ( ; ts; ts = ts->next)
-+ {
-+ if (ts->seg == seg)
-+ return ts;
-+ }
-+
-+ return NULL;
- }
-
-
-+void dump_trampolines (void);
-+
-+void
-+dump_trampolines (void)
-+{
-+ struct trampoline_seg *ts = trampoline_seg_list.next;
-+
-+ for ( ; ts; ts = ts->next)
-+ {
-+ asection *seg = ts->seg;
-+
-+ if (seg == NULL)
-+ continue;
-+ fprintf(stderr, "SECTION %s\n", seg->name);
-+ struct trampoline_frag *tf = ts->trampoline_list.next;
-+ for ( ; tf; tf = tf->next)
-+ {
-+ if (tf->fragP == NULL)
-+ continue;
-+ fprintf(stderr, " 0x%08x: fix=%d, jump_around=%s\n",
-+ (int)tf->fragP->fr_address, (int)tf->fragP->fr_fix,
-+ tf->needs_jump_around ? "T" : "F");
-+ }
-+ }
-+}
-+
- static void
- xtensa_cleanup_align_frags (void)
- {
-@@ -8708,6 +8891,149 @@ xtensa_relax_frag (fragS *fragP, long stretch, int *stretched_p)
- new_stretch += relax_frag_for_align (fragP, stretch);
- break;
-
-+ case RELAX_TRAMPOLINE:
-+ if (fragP->tc_frag_data.relax_seen)
-+ {
-+ segment_info_type *seginfo = seg_info (now_seg);
-+ fragS *fP; /* The out-of-range jump. */
-+ fixS *fixP;
-+
-+ /* Scan for jumps that will not reach. */
-+ for (fixP = seginfo->fix_root; fixP ; fixP = fixP->fx_next)
-+ {
-+ symbolS *s = fixP->fx_addsy;
-+ xtensa_opcode opcode;
-+ int target;
-+ int addr;
-+ int delta;
-+
-+ if (fixP->fx_r_type < BFD_RELOC_XTENSA_SLOT0_OP ||
-+ fixP->fx_r_type > BFD_RELOC_XTENSA_SLOT14_OP)
-+ continue;
-+ xtensa_insnbuf_from_chars (isa, trampoline_buf,
-+ (unsigned char *) fixP->fx_frag->fr_literal + fixP->fx_where,
-+ 0);
-+ fmt = xtensa_format_decode (isa, trampoline_buf);
-+ gas_assert (fmt != XTENSA_UNDEFINED);
-+ slot = fixP->tc_fix_data.slot;
-+ xtensa_format_get_slot (isa, fmt, slot, trampoline_buf, trampoline_slotbuf);
-+ opcode = xtensa_opcode_decode (isa, fmt, slot, trampoline_slotbuf);
-+ if (opcode != xtensa_j_opcode)
-+ continue;
-+ target = S_GET_VALUE (s);
-+ addr = fixP->fx_frag->fr_address;
-+ delta = target - addr + stretch;
-+ if (delta > J_RANGE || delta < -1 * J_RANGE)
-+ { /* Found an out-of-range jump; scan the list of trampolines for the best match. */
-+ struct trampoline_seg *ts = find_trampoline_seg (now_seg);
-+ struct trampoline_frag *tf = ts->trampoline_list.next;
-+ struct trampoline_frag *prev = &ts->trampoline_list;
-+ int lower = (target < addr) ? target : addr;
-+ int upper = (target > addr) ? target : addr;
-+ int midpoint = lower + (upper - lower) / 2;
-+
-+ if ((upper - lower) > 2 * J_RANGE)
-+ {
-+ /* One trampoline won't suffice; we need multiple jumps.
-+ Jump to the trampoline that's farthest, but still in
-+ range relative to the original "j" instruction. */
-+ for ( ; tf; prev = tf, tf = tf->next )
-+ {
-+ int this_addr = tf->fragP->fr_address + tf->fragP->fr_fix;
-+ int next_addr = (tf->next) ? tf->next->fragP->fr_address + tf->next->fragP->fr_fix : 0 ;
-+
-+ if (addr == lower)
-+ {
-+ /* Forward jump. */
-+ if (this_addr - addr < J_RANGE)
-+ break;
-+ }
-+ else
-+ {
-+ /* Backward jump. */
-+ if (next_addr == 0 || addr - next_addr > J_RANGE)
-+ break;
-+ }
-+ }
-+ }
-+ else
-+ {
-+ struct trampoline_frag *best_tf = NULL;
-+ int best_delta = 0;
-+
-+ for ( ; tf; prev = tf, tf = tf->next )
-+ {
-+ int this_addr = tf->fragP->fr_address + tf->fragP->fr_fix;
-+ int this_delta = abs (this_addr - midpoint);
-+
-+ if (!best_tf || this_delta < best_delta)
-+ {
-+ best_tf = tf;
-+ best_delta = this_delta;
-+ }
-+ }
-+ tf = best_tf;
-+ }
-+ if (tf->fragP == fragP)
-+ {
-+ int trampaddr = fragP->fr_address + fragP->fr_fix;
-+
-+ if (abs (addr - trampaddr) < J_RANGE)
-+ { /* The trampoline is in range of original; fix it! */
-+ fixS *newfixP;
-+ int offset;
-+ TInsn insn;
-+ symbolS *lsym;
-+
-+ new_stretch += init_trampoline_frag (tf);
-+ offset = fragP->fr_fix; /* Where to assemble the j insn. */
-+ lsym = fragP->fr_symbol;
-+ fP = fixP->fx_frag;
-+ /* Assemble a jump to the target label here. */
-+ tinsn_init (&insn);
-+ insn.insn_type = ITYPE_INSN;
-+ insn.opcode = xtensa_j_opcode;
-+ insn.ntok = 1;
-+ set_expr_symbol_offset (&insn.tok[0], lsym, offset);
-+ fmt = xg_get_single_format (xtensa_j_opcode);
-+ tinsn_to_slotbuf (fmt, 0, &insn, trampoline_slotbuf);
-+ xtensa_format_set_slot (isa, fmt, 0, trampoline_buf, trampoline_slotbuf);
-+ xtensa_insnbuf_to_chars (isa, trampoline_buf, (unsigned char *)fragP->fr_literal + offset, 3);
-+ fragP->fr_fix += 3;
-+ fragP->fr_var -= 3;
-+ /* Add a fix-up for the original j insn. */
-+ newfixP = fix_new (fP, fixP->fx_where, fixP->fx_size, lsym, fragP->fr_fix - 3, TRUE, fixP->fx_r_type);
-+ newfixP->fx_no_overflow = 1;
-+ newfixP->tc_fix_data.X_add_symbol = lsym;
-+ newfixP->tc_fix_data.X_add_number = offset;
-+ newfixP->tc_fix_data.slot = slot;
-+ /* Move the fix-up from the original j insn to this one. */
-+ fixP->fx_frag = fragP;
-+ fixP->fx_where = fragP->fr_fix - 3;
-+ fixP->tc_fix_data.slot = 0;
-+ /* Adjust the jump around this trampoline (if present). */
-+ if (tf->fixP != NULL)
-+ {
-+ tf->fixP->fx_offset += 3;
-+ }
-+ new_stretch += 3;
-+ fragP->tc_frag_data.relax_seen = FALSE; /* Need another pass. */
-+ /* Do we have room for more? */
-+ if (fragP->fr_var < 3)
-+ { /* No, convert to fill. */
-+ frag_wane (fragP);
-+ fragP->fr_subtype = 0;
-+ /* Remove from the trampoline_list. */
-+ prev->next = tf->next;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ }
-+ }
-+ break;
-+
- default:
- as_bad (_("bad relaxation state"));
- }
-@@ -9146,6 +9472,200 @@ bytes_to_stretch (fragS *this_frag,
- }
-
-
-+static struct trampoline_frag *
-+search_trampolines (TInsn *tinsn, fragS *fragP, bfd_boolean unreachable_only)
-+{
-+ struct trampoline_seg *ts = find_trampoline_seg (now_seg);
-+ struct trampoline_frag *tf = (ts) ? ts->trampoline_list.next : NULL;
-+ struct trampoline_frag *best_tf = NULL;
-+ int best_delta = 0;
-+ int best_addr = 0;
-+ symbolS *sym = tinsn->tok[0].X_add_symbol;
-+ offsetT target = S_GET_VALUE (sym) + tinsn->tok[0].X_add_number;
-+ offsetT addr = fragP->fr_address;
-+ offsetT lower = (addr < target) ? addr : target;
-+ offsetT upper = (addr > target) ? addr : target;
-+ int delta = upper - lower;
-+ offsetT midpoint = lower + delta / 2;
-+ int this_delta = -1;
-+ int this_addr = -1;
-+
-+ if (delta > 2 * J_RANGE)
-+ {
-+ /* One trampoline won't do; we need multiple.
-+ Choose the farthest trampoline that's still in range of the original
-+ and let a later pass finish the job. */
-+ for ( ; tf; tf = tf->next)
-+ {
-+ int next_addr = (tf->next) ? tf->next->fragP->fr_address + tf->next->fragP->fr_fix : 0;
-+
-+ this_addr = tf->fragP->fr_address + tf->fragP->fr_fix;
-+ if (lower == addr)
-+ {
-+ /* Forward jump. */
-+ if (this_addr - addr < J_RANGE)
-+ break;
-+ }
-+ else
-+ {
-+ /* Backward jump. */
-+ if (next_addr == 0 || addr - next_addr > J_RANGE)
-+ break;
-+ }
-+ if (abs (addr - this_addr) < J_RANGE)
-+ return tf;
-+
-+ return NULL;
-+ }
-+ }
-+ for ( ; tf; tf = tf->next)
-+ {
-+ this_addr = tf->fragP->fr_address + tf->fragP->fr_fix;
-+ this_delta = abs (this_addr - midpoint);
-+ if (unreachable_only && tf->needs_jump_around)
-+ continue;
-+ if (!best_tf || this_delta < best_delta)
-+ {
-+ best_tf = tf;
-+ best_delta = this_delta;
-+ best_addr = this_addr;
-+ }
-+ }
-+
-+ if (best_tf &&
-+ best_delta < J_RANGE &&
-+ abs(best_addr - lower) < J_RANGE &&
-+ abs(best_addr - upper) < J_RANGE)
-+ return best_tf;
-+
-+ return NULL; /* No suitable trampoline found. */
-+}
-+
-+
-+static struct trampoline_frag *
-+get_best_trampoline (TInsn *tinsn, fragS *fragP)
-+{
-+ struct trampoline_frag *tf = NULL;
-+
-+ tf = search_trampolines (tinsn, fragP, TRUE); /* Try unreachable first. */
-+
-+ if (tf == NULL)
-+ tf = search_trampolines (tinsn, fragP, FALSE); /* Try ones needing a jump-around, too. */
-+
-+ return tf;
-+}
-+
-+
-+static void
-+check_and_update_trampolines (void)
-+{
-+ struct trampoline_seg *ts = find_trampoline_seg (now_seg);
-+ struct trampoline_frag *tf = ts->trampoline_list.next;
-+ struct trampoline_frag *prev = &ts->trampoline_list;
-+
-+ for ( ; tf; prev = tf, tf = tf->next)
-+ {
-+ if (tf->fragP->fr_var < 3)
-+ {
-+ frag_wane (tf->fragP);
-+ prev->next = tf->next;
-+ tf->fragP = NULL;
-+ }
-+ }
-+}
-+
-+
-+static int
-+init_trampoline_frag (struct trampoline_frag *trampP)
-+{
-+ fragS *fp = trampP->fragP;
-+ int growth = 0;
-+
-+ if (fp->fr_fix == 0)
-+ {
-+ symbolS *lsym;
-+ char label[10 + 2 * sizeof(fp)];
-+ sprintf (label, ".L0_TR_%p", fp);
-+
-+ lsym = (symbolS *)local_symbol_make (label, now_seg, 0, fp);
-+ fp->fr_symbol = lsym;
-+ if (trampP->needs_jump_around)
-+ {
-+ /* Add a jump around this block of jumps, in case
-+ control flows into this block. */
-+ fixS *fixP;
-+ TInsn insn;
-+ xtensa_format fmt;
-+ xtensa_isa isa = xtensa_default_isa;
-+
-+ fp->tc_frag_data.is_insn = 1;
-+ /* Assemble a jump insn. */
-+ tinsn_init (&insn);
-+ insn.insn_type = ITYPE_INSN;
-+ insn.opcode = xtensa_j_opcode;
-+ insn.ntok = 1;
-+ set_expr_symbol_offset (&insn.tok[0], lsym, 3);
-+ fmt = xg_get_single_format (xtensa_j_opcode);
-+ tinsn_to_slotbuf (fmt, 0, &insn, trampoline_slotbuf);
-+ xtensa_format_set_slot (isa, fmt, 0, trampoline_buf, trampoline_slotbuf);
-+ xtensa_insnbuf_to_chars (isa, trampoline_buf, (unsigned char *)fp->fr_literal, 3);
-+ fp->fr_fix += 3;
-+ fp->fr_var -= 3;
-+ growth = 3;
-+ fixP = fix_new (fp, 0, 3, lsym, 3, TRUE, BFD_RELOC_XTENSA_SLOT0_OP);
-+ trampP->fixP = fixP;
-+ }
-+ }
-+ return growth;
-+}
-+
-+
-+static int
-+add_jump_to_trampoline (struct trampoline_frag *trampP, fragS *origfrag)
-+{
-+ fragS *tramp = trampP->fragP;
-+ fixS *fixP;
-+ int offset = tramp->fr_fix; /* Where to assemble the j insn. */
-+ TInsn insn;
-+ symbolS *lsym;
-+ symbolS *tsym;
-+ int toffset;
-+ xtensa_format fmt;
-+ xtensa_isa isa = xtensa_default_isa;
-+ int growth = 0;
-+
-+ lsym = tramp->fr_symbol;
-+ /* Assemble a jump to the target label in the trampoline frag. */
-+ tsym = origfrag->tc_frag_data.slot_symbols[0];
-+ toffset = origfrag-> tc_frag_data.slot_offsets[0];
-+ tinsn_init (&insn);
-+ insn.insn_type = ITYPE_INSN;
-+ insn.opcode = xtensa_j_opcode;
-+ insn.ntok = 1;
-+ set_expr_symbol_offset (&insn.tok[0], tsym, toffset);
-+ fmt = xg_get_single_format (xtensa_j_opcode);
-+ tinsn_to_slotbuf (fmt, 0, &insn, trampoline_slotbuf);
-+ xtensa_format_set_slot (isa, fmt, 0, trampoline_buf, trampoline_slotbuf);
-+ xtensa_insnbuf_to_chars (isa, trampoline_buf, (unsigned char *)tramp->fr_literal + offset, 3);
-+ tramp->fr_fix += 3;
-+ tramp->fr_var -= 3;
-+ growth = 3;
-+ /* add a fix-up for the trampoline jump. */
-+ fixP = fix_new (tramp, tramp->fr_fix - 3, 3, tsym, toffset, TRUE, BFD_RELOC_XTENSA_SLOT0_OP);
-+ /* Modify the jump at the start of this trampoline to point past the newly-added jump. */
-+ fixP = trampP->fixP;
-+ if (fixP)
-+ fixP->fx_offset += 3;
-+ /* Modify the original j to point here. */
-+ origfrag->tc_frag_data.slot_symbols[0] = lsym;
-+ origfrag->tc_frag_data.slot_offsets[0] = tramp->fr_fix - 3;
-+ /* If trampoline is full, remove it from the list. */
-+ check_and_update_trampolines ();
-+
-+ return growth;
-+}
-+
-+
- static long
- relax_frag_immed (segT segP,
- fragS *fragP,
-@@ -9284,6 +9804,37 @@ relax_frag_immed (segT segP,
- if (negatable_branch && istack.ninsn > 1)
- update_next_frag_state (fragP);
-
-+ /* If last insn is a jump, and it cannot reach its target, try to find a trampoline. */
-+ if (istack.ninsn > 2 &&
-+ istack.insn[istack.ninsn - 1].insn_type == ITYPE_LABEL &&
-+ istack.insn[istack.ninsn - 2].insn_type == ITYPE_INSN &&
-+ istack.insn[istack.ninsn - 2].opcode == xtensa_j_opcode)
-+ {
-+ TInsn *jinsn = &istack.insn[istack.ninsn - 2];
-+
-+ if (!xg_symbolic_immeds_fit (jinsn, segP, fragP, fragP->fr_offset, total_text_diff))
-+ {
-+ struct trampoline_frag *tf = get_best_trampoline (jinsn, fragP);
-+
-+ if (tf)
-+ {
-+ this_text_diff += init_trampoline_frag (tf);
-+ this_text_diff += add_jump_to_trampoline (tf, fragP);
-+ }
-+ else
-+ {
-+ /* If target symbol is undefined, assume it will reach once linked. */
-+ expressionS *exp = &istack.insn[istack.ninsn - 2].tok[0];
-+
-+ if (exp->X_op == O_symbol && S_IS_DEFINED (exp->X_add_symbol))
-+ {
-+ as_bad_where (fragP->fr_file, fragP->fr_line,
-+ _("jump target out of range; no usable trampoline found"));
-+ }
-+ }
-+ }
-+ }
-+
- return this_text_diff;
- }
-
-@@ -9404,6 +9955,9 @@ md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, segT sec, fragS *fragp)
- else
- as_bad (_("invalid relaxation fragment result"));
- break;
-+
-+ case RELAX_TRAMPOLINE:
-+ break;
- }
-
- fragp->fr_var = 0;
-diff --git a/gas/config/tc-xtensa.h b/gas/config/tc-xtensa.h
-index 0bf1240..4672bc6 100644
---- a/gas/config/tc-xtensa.h
-+++ b/gas/config/tc-xtensa.h
-@@ -180,6 +180,11 @@ enum xtensa_relax_statesE
- prevent the linker from changing the size of any frag between the
- section start and the org frag. */
-
-+ RELAX_TRAMPOLINE,
-+ /* Every few thousand frags, we insert one of these, just in case we may
-+ need some space for a trampoline (jump to a jump) because the function
-+ has gotten too big. If not needed, it disappears. */
-+
- RELAX_NONE
- };
-
-diff --git a/gas/frags.c b/gas/frags.c
-index 5f68480..e14099d 100644
---- a/gas/frags.c
-+++ b/gas/frags.c
-@@ -24,6 +24,20 @@
-
- extern fragS zero_address_frag;
- extern fragS predefined_address_frag;
-+
-+static int totalfrags;
-+
-+int
-+get_frag_count (void)
-+{
-+ return totalfrags;
-+}
-+
-+void
-+clear_frag_count (void)
-+{
-+ totalfrags = 0;
-+}
- \f
- /* Initialization for frag routines. */
-
-@@ -70,6 +84,7 @@ frag_alloc (struct obstack *ob)
- ptr = (fragS *) obstack_alloc (ob, SIZEOF_STRUCT_FRAG);
- obstack_alignment_mask (ob) = oalign;
- memset (ptr, 0, SIZEOF_STRUCT_FRAG);
-+ totalfrags++;
- return ptr;
- }
- \f
-diff --git a/gas/frags.h b/gas/frags.h
-index 319898f..2f9e1b5 100644
---- a/gas/frags.h
-+++ b/gas/frags.h
-@@ -155,4 +155,7 @@ char *frag_var (relax_stateT type,
-
- bfd_boolean frag_offset_fixed_p (const fragS *, const fragS *, offsetT *);
-
-+int get_frag_count (void);
-+void clear_frag_count (void);
-+
- #endif /* FRAGS_H */
-diff --git a/gas/testsuite/gas/xtensa/all.exp b/gas/testsuite/gas/xtensa/all.exp
-index 2b2c294..3683b78 100644
---- a/gas/testsuite/gas/xtensa/all.exp
-+++ b/gas/testsuite/gas/xtensa/all.exp
-@@ -98,6 +98,7 @@ if [istarget xtensa*-*-*] then {
- run_dump_test "pcrel"
- run_dump_test "weak-call"
- run_dump_test "jlong"
-+ run_dump_test "trampoline"
- }
-
- if [info exists errorInfo] then {
-diff --git a/gas/testsuite/gas/xtensa/trampoline.d b/gas/testsuite/gas/xtensa/trampoline.d
-new file mode 100644
-index 0000000..b4f65dc
---- /dev/null
-+++ b/gas/testsuite/gas/xtensa/trampoline.d
-@@ -0,0 +1,26 @@
-+#as:
-+#objdump: -d
-+#name: trampolines relaxation
-+
-+.*: +file format .*xtensa.*
-+#...
-+.*0:.*j.0x1194c
-+.*3:.*j.0x1194f
-+.*6:.*j.0x11952
-+.*9:.*j.0x1d4e4
-+#...
-+.*11949:.*j.0x11955
-+.*1194c:.*j.0x24a0e
-+.*1194f:.*j.0x24a0e
-+.*11952:.*j.0x24a11
-+#...
-+.*1d4e1:.*j.0x1d4e7
-+.*1d4e4:.*j.0x33462
-+#...
-+.*24a0e:.*j.0x24a0e
-+.*24a11:.*j.0x24a11
-+#...
-+.*3345f:.*ret
-+.*33462:.*j.0x49407
-+#...
-+.*49407:.*j.0x49407
-diff --git a/gas/testsuite/gas/xtensa/trampoline.s b/gas/testsuite/gas/xtensa/trampoline.s
-new file mode 100644
-index 0000000..259a3bb
---- /dev/null
-+++ b/gas/testsuite/gas/xtensa/trampoline.s
-@@ -0,0 +1,21 @@
-+ .text
-+ j 1f
-+ j 1f
-+ j 2f
-+ j 3f
-+ .rep 25000
-+99:
-+ and a2, a2, a3
-+ bne a2, a3, 99b
-+ .endr
-+1:
-+ j 1b
-+2:
-+ j 2b
-+
-+ .rep 25000
-+ and a2, a2, a3
-+ _ret
-+ .endr
-+3:
-+ j 3b
---
-1.8.1.4
-
diff --git a/package/binutils/2.23.2/901-xtensa-gas-first-frag-alignment.patch b/package/binutils/2.23.2/901-xtensa-gas-first-frag-alignment.patch
deleted file mode 100644
index e1c2d85..0000000
--- a/package/binutils/2.23.2/901-xtensa-gas-first-frag-alignment.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From a35d5e823fdfe8a6e7e05ca8e3fb8bb5697335b1 Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc@gmail.com>
-Date: Tue, 15 Apr 2014 19:12:46 +0400
-Subject: [PATCH] Fix alignment for the first section frag on xtensa
-
-Linking object files produced by partial linking with link-time
-relaxation enabled sometimes fails with the following error message:
-
-dangerous relocation: call8: misaligned call target: (.text.unlikely+0x63)
-
-This happens because no basic block with an XTENSA_PROP_ALIGN flag in the
-property table is generated for the first basic block, even if the
-.align directive is present.
-It was believed that the first frag alignment could be derived from the
-section alignment, but this was not implemented for the partial linking
-case: after partial linking first frag of a section may become not
-first, but no additional alignment frag is inserted before it.
-Basic block for such frag may be merged with previous basic block into
-extended basic block during relaxation pass losing its alignment
-restrictions.
-
-Fix this by always recording alignment for the first section frag.
-
-2014-04-22 Max Filippov <jcmvbkbc@gmail.com>
-
-gas/
- * config/tc-xtensa.c (xtensa_handle_align): record alignment for the
- first section frag.
-
----
-Backported from: a35d5e823fdfe8a6e7e05ca8e3fb8bb5697335b1
-Changes to Changelog files and tests are dropped.
-
- gas/config/tc-xtensa.c | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c
-index ea23c96..58ace38 100644
---- a/gas/config/tc-xtensa.c
-+++ b/gas/config/tc-xtensa.c
-@@ -5609,7 +5609,6 @@ xtensa_handle_align (fragS *fragP)
- && ! fragP->tc_frag_data.is_literal
- && (fragP->fr_type == rs_align
- || fragP->fr_type == rs_align_code)
-- && fragP->fr_address + fragP->fr_fix > 0
- && fragP->fr_offset > 0
- && now_seg != bss_section)
- {
---
-1.8.1.4
-
diff --git a/package/binutils/2.23.2/902-xtensa-gas-ld-diff-relocation-signed.patch b/package/binutils/2.23.2/902-xtensa-gas-ld-diff-relocation-signed.patch
deleted file mode 100644
index ba24f4e..0000000
--- a/package/binutils/2.23.2/902-xtensa-gas-ld-diff-relocation-signed.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From 6a17eba5358549d0d6d195bb22b34cdbc068def2 Mon Sep 17 00:00:00 2001
-From: Volodymyr Arbatov <arbatov@cadence.com>
-Date: Mon, 6 May 2013 09:43:21 -0800
-Subject: [PATCH] Use signed data type for R_XTENSA_DIFF* relocation offsets.
-
-R_XTENSA_DIFF relocation offsets are in fact signed. Treat them as such.
-Add testcase that examines ld behaviour on R_XTENSA_DIFF relocation
-changing sign during relaxation.
-
-2014-05-02 Volodymyr Arbatov <arbatov@cadence.com>
- David Weatherford <weath@cadence.com>
- Max Filippov <jcmvbkbc@gmail.com>
-
-bfd/
- * elf32-xtensa.c (relax_section): treat R_XTENSA_DIFF* relocations as
- signed.
-
-gas/
- * config/tc-xtensa.c (md_apply_fix): mark BFD_RELOC_XTENSA_DIFF*
- fixups as signed.
----
-Backported from: 1058c7532d0b012ac329219264ddad59049fb6e6
-Changes to Changelog files and tests are dropped.
-
- bfd/elf32-xtensa.c | 32 ++++++++++++-----------
- gas/config/tc-xtensa.c | 3 +++
- 2 files changed, 20 insertions(+), 15 deletions(-)
-
-diff --git a/bfd/elf32-xtensa.c b/bfd/elf32-xtensa.c
-index edb04b4..8818d67 100644
---- a/bfd/elf32-xtensa.c
-+++ b/bfd/elf32-xtensa.c
-@@ -222,11 +222,11 @@ static reloc_howto_type elf_howto_table[] =
- FALSE, 0, 0, FALSE),
-
- /* Relocations for supporting difference of symbols. */
-- HOWTO (R_XTENSA_DIFF8, 0, 0, 8, FALSE, 0, complain_overflow_bitfield,
-+ HOWTO (R_XTENSA_DIFF8, 0, 0, 8, FALSE, 0, complain_overflow_signed,
- bfd_elf_xtensa_reloc, "R_XTENSA_DIFF8", FALSE, 0, 0xff, FALSE),
-- HOWTO (R_XTENSA_DIFF16, 0, 1, 16, FALSE, 0, complain_overflow_bitfield,
-+ HOWTO (R_XTENSA_DIFF16, 0, 1, 16, FALSE, 0, complain_overflow_signed,
- bfd_elf_xtensa_reloc, "R_XTENSA_DIFF16", FALSE, 0, 0xffff, FALSE),
-- HOWTO (R_XTENSA_DIFF32, 0, 2, 32, FALSE, 0, complain_overflow_bitfield,
-+ HOWTO (R_XTENSA_DIFF32, 0, 2, 32, FALSE, 0, complain_overflow_signed,
- bfd_elf_xtensa_reloc, "R_XTENSA_DIFF32", FALSE, 0, 0xffffffff, FALSE),
-
- /* General immediate operand relocations. */
-@@ -9013,7 +9013,8 @@ relax_section (bfd *abfd, asection *sec, struct bfd_link_info *link_info)
- || r_type == R_XTENSA_DIFF16
- || r_type == R_XTENSA_DIFF32)
- {
-- bfd_vma diff_value = 0, new_end_offset, diff_mask = 0;
-+ bfd_signed_vma diff_value = 0;
-+ bfd_vma new_end_offset, diff_mask = 0;
-
- if (bfd_get_section_limit (abfd, sec) < old_source_offset)
- {
-@@ -9027,15 +9028,15 @@ relax_section (bfd *abfd, asection *sec, struct bfd_link_info *link_info)
- {
- case R_XTENSA_DIFF8:
- diff_value =
-- bfd_get_8 (abfd, &contents[old_source_offset]);
-+ bfd_get_signed_8 (abfd, &contents[old_source_offset]);
- break;
- case R_XTENSA_DIFF16:
- diff_value =
-- bfd_get_16 (abfd, &contents[old_source_offset]);
-+ bfd_get_signed_16 (abfd, &contents[old_source_offset]);
- break;
- case R_XTENSA_DIFF32:
- diff_value =
-- bfd_get_32 (abfd, &contents[old_source_offset]);
-+ bfd_get_signed_32 (abfd, &contents[old_source_offset]);
- break;
- }
-
-@@ -9047,24 +9048,25 @@ relax_section (bfd *abfd, asection *sec, struct bfd_link_info *link_info)
- switch (r_type)
- {
- case R_XTENSA_DIFF8:
-- diff_mask = 0xff;
-- bfd_put_8 (abfd, diff_value,
-+ diff_mask = 0x7f;
-+ bfd_put_signed_8 (abfd, diff_value,
- &contents[old_source_offset]);
- break;
- case R_XTENSA_DIFF16:
-- diff_mask = 0xffff;
-- bfd_put_16 (abfd, diff_value,
-+ diff_mask = 0x7fff;
-+ bfd_put_signed_16 (abfd, diff_value,
- &contents[old_source_offset]);
- break;
- case R_XTENSA_DIFF32:
-- diff_mask = 0xffffffff;
-- bfd_put_32 (abfd, diff_value,
-+ diff_mask = 0x7fffffff;
-+ bfd_put_signed_32 (abfd, diff_value,
- &contents[old_source_offset]);
- break;
- }
-
-- /* Check for overflow. */
-- if ((diff_value & ~diff_mask) != 0)
-+ /* Check for overflow. Sign bits must be all zeroes or all ones */
-+ if ((diff_value & ~diff_mask) != 0 &&
-+ (diff_value & ~diff_mask) != (-1 & ~diff_mask))
- {
- (*link_info->callbacks->reloc_dangerous)
- (link_info, _("overflow after relaxation"),
-diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c
-index 58ace38..7547c0a0 100644
---- a/gas/config/tc-xtensa.c
-+++ b/gas/config/tc-xtensa.c
-@@ -5867,12 +5867,15 @@ md_apply_fix (fixS *fixP, valueT *valP, segT seg)
- {
- case BFD_RELOC_8:
- fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF8;
-+ fixP->fx_signed = 1;
- break;
- case BFD_RELOC_16:
- fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF16;
-+ fixP->fx_signed = 1;
- break;
- case BFD_RELOC_32:
- fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF32;
-+ fixP->fx_signed = 1;
- break;
- default:
- break;
---
-1.8.1.4
-
diff --git a/package/binutils/2.23.2/903-xtensa-fix-ld-segfault-when-linking-linux-modules.patch b/package/binutils/2.23.2/903-xtensa-fix-ld-segfault-when-linking-linux-modules.patch
deleted file mode 100644
index 6a0846e..0000000
--- a/package/binutils/2.23.2/903-xtensa-fix-ld-segfault-when-linking-linux-modules.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From e7d17e71cdc10a2e81e454ce3b9637f1b2a587f2 Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc@gmail.com>
-Date: Thu, 10 Jul 2014 01:47:33 +0400
-Subject: [PATCH] Fix xtensa ld segfault when linking linux modules
-
-is_inconsistent_linkonce_section makes an assumption that section name
-that starts with ".gnu.linkonce.prop." has one more dot in its suffix.
-However gas generates such section name by insertion of "prop." right
-after ".gnu.linkonce." part of the name of the original section. So, for
-section named ".gnu.linkonce.this_module" corresponding property section
-name does not satisfy the assumption. Such section names are common in
-linux modules. This bug was exposed by the patch "a35d5e8 Fix alignment
-for the first section frag on xtensa", that makes gas produce property
-section for each section that has ".align" directive in it.
-
-Use suffix that immediately follows ".gnu.linkonce.prop." when there are
-no more dots following it.
-
-2014-07-10 Max Filippov <jcmvbkbc@gmail.com>
-
-ld/
- * emultempl/xtensaelf.em (is_inconsistent_linkonce_section):
- correctly handle missing dot in section name after
- ".gnu.linkonce.prop.".
----
-Backported from: e7d17e71cdc10a2e81e454ce3b9637f1b2a587f2
-Changes to ld/ChangeLog file are dropped.
-
- ld/emultempl/xtensaelf.em | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/ld/emultempl/xtensaelf.em b/ld/emultempl/xtensaelf.em
-index 151eea4..948d18d 100644
---- a/ld/emultempl/xtensaelf.em
-+++ b/ld/emultempl/xtensaelf.em
-@@ -1310,7 +1310,7 @@ is_inconsistent_linkonce_section (asection *sec)
- for Tensilica's XCC compiler. */
- name = sec_name + linkonce_len;
- if (CONST_STRNEQ (name, "prop."))
-- name = strchr (name + 5, '.') + 1;
-+ name = strchr (name + 5, '.') ? strchr (name + 5, '.') + 1 : name + 5;
- else if (name[1] == '.'
- && (name[0] == 'p' || name[0] == 'e' || name[0] == 'h'))
- name += 2;
---
-1.8.1.4
-
diff --git a/package/binutils/2.23.2/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch b/package/binutils/2.23.2/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch
deleted file mode 100644
index dba7620..0000000
--- a/package/binutils/2.23.2/904-Fix-call8-call-target-out-of-range-xtensa-ld-relaxation.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 7fc39194f8fb48914c995f8ec3826d50086f1ec0 Mon Sep 17 00:00:00 2001
-From: Sterling Augustine <augustine.sterling@gmail.com>
-Date: Tue, 25 Jan 2011 13:59:13 -0800
-Subject: [PATCH] Fix 'call8: call target out of range' xtensa ld relaxation
- bug
-
-During link-time relaxation distance between cross-section call site and
-its target may grow, producing 'call target out of range' error for
-relaxed calls. Be more conservative when calculating whether or not a
-callx can be converted to a straight call.
-
-2014-09-23 Sterling Augustine <augustine.sterling@gmail.com>
-
-bfd/
- * elf32-xtensa.c (is_resolvable_asm_expansion): for cross-section
- call relaxation use furthermost addresses where call source and
- destination can be to check whether it's in the range of a direct
- call.
-
-Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
----
- bfd/elf32-xtensa.c | 41 +++++++++++++++++++++++++++++++++++++----
- 1 file changed, 37 insertions(+), 4 deletions(-)
-
-diff --git a/bfd/elf32-xtensa.c b/bfd/elf32-xtensa.c
-index 09862e3..e32496a 100644
---- a/bfd/elf32-xtensa.c
-+++ b/bfd/elf32-xtensa.c
-@@ -7124,10 +7124,43 @@ is_resolvable_asm_expansion (bfd *abfd,
- || is_reloc_sym_weak (abfd, irel)))
- return FALSE;
-
-- self_address = (sec->output_section->vma
-- + sec->output_offset + irel->r_offset + 3);
-- dest_address = (target_sec->output_section->vma
-- + target_sec->output_offset + target_offset);
-+ if (target_sec->output_section != sec->output_section)
-+ {
-+ /* If the two sections are sufficiently far away that relaxation
-+ might take the call out of range, we can't simplify. For
-+ example, a positive displacement call into another memory
-+ could get moved to a lower address due to literal removal,
-+ but the destination won't move, and so the displacment might
-+ get larger.
-+
-+ If the displacement is negative, assume the destination could
-+ move as far back as the start of the output section. The
-+ self_address will be at least as far into the output section
-+ as it is prior to relaxation.
-+
-+ If the displacement is postive, assume the destination will be in
-+ it's pre-relaxed location (because relaxation only makes sections
-+ smaller). The self_address could go all the way to the beginning
-+ of the output section. */
-+
-+ dest_address = target_sec->output_section->vma;
-+ self_address = sec->output_section->vma;
-+
-+ if (sec->output_section->vma > target_sec->output_section->vma)
-+ self_address += sec->output_offset + irel->r_offset + 3;
-+ else
-+ dest_address += bfd_get_section_limit (abfd, target_sec->output_section);
-+ /* Call targets should be four-byte aligned. */
-+ dest_address = (dest_address + 3) & ~3;
-+ }
-+ else
-+ {
-+
-+ self_address = (sec->output_section->vma
-+ + sec->output_offset + irel->r_offset + 3);
-+ dest_address = (target_sec->output_section->vma
-+ + target_sec->output_offset + target_offset);
-+ }
-
- *is_reachable_p = pcrel_reloc_fits (direct_call_opcode, 0,
- self_address, dest_address);
---
-1.8.1.4
-
diff --git a/package/binutils/2.23.2/905-Fix-trampolines-search-code-for-conditional-branches.patch b/package/binutils/2.23.2/905-Fix-trampolines-search-code-for-conditional-branches.patch
deleted file mode 100644
index 8aeb064..0000000
--- a/package/binutils/2.23.2/905-Fix-trampolines-search-code-for-conditional-branches.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 415480d6471e67aef97c0241d451ef2423a1da9d Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc@gmail.com>
-Date: Tue, 25 Nov 2014 21:33:21 +0300
-Subject: [PATCH] Fix trampolines search code for conditional branches
-
-For conditional branches that need more than one trampoline to reach its
-target assembler couldn't always find suitable trampoline because
-post-loop condition check was placed inside the loop, resulting in
-premature loop termination. Move check outside the loop.
-
-This fixes the following build errors seen when assembling huge files
-produced by gcc:
- Error: jump target out of range; no usable trampoline found
- Error: operand 1 of 'j' has out of range value '307307'
-
-2014-11-25 Max Filippov <jcmvbkbc@gmail.com>
-
-gas/
- * config/tc-xtensa.c (search_trampolines): Move post-loop
- condition check outside the search loop.
-
-gas/testsuite/
- * gas/xtensa/trampoline.d: Add expected output for branches.
- * gas/xtensa/trampoline.s: Add test case for branches.
-
-Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
----
-Backported from: d92b6eece424f0ad35d96fdd85bf207295e8c4c3
-Changes to ChangeLogs are dropped.
-
- gas/config/tc-xtensa.c | 8 ++++----
- gas/testsuite/gas/xtensa/trampoline.d | 9 +++++++++
- gas/testsuite/gas/xtensa/trampoline.s | 7 +++++++
- 3 files changed, 20 insertions(+), 4 deletions(-)
-
-diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c
-index d11b0c7..f23ccf8 100644
---- a/gas/config/tc-xtensa.c
-+++ b/gas/config/tc-xtensa.c
-@@ -9514,11 +9514,11 @@ search_trampolines (TInsn *tinsn, fragS *fragP, bfd_boolean unreachable_only)
- if (next_addr == 0 || addr - next_addr > J_RANGE)
- break;
- }
-- if (abs (addr - this_addr) < J_RANGE)
-- return tf;
--
-- return NULL;
- }
-+ if (abs (addr - this_addr) < J_RANGE)
-+ return tf;
-+
-+ return NULL;
- }
- for ( ; tf; tf = tf->next)
- {
-diff --git a/gas/testsuite/gas/xtensa/trampoline.d b/gas/testsuite/gas/xtensa/trampoline.d
-index b4f65dc..5ae32a6 100644
---- a/gas/testsuite/gas/xtensa/trampoline.d
-+++ b/gas/testsuite/gas/xtensa/trampoline.d
-@@ -24,3 +24,12 @@
- .*33462:.*j.0x49407
- #...
- .*49407:.*j.0x49407
-+.*4940a:.*beqz.n.a2,.0x4940f
-+.*4940c:.*j.0x693d1
-+#...
-+.*693d1:.*j.0x7ddd4
-+#...
-+.*7ddd4:.*j.0x927f5
-+#...
-+.*927f5:.*j.0x927f5
-+#...
-diff --git a/gas/testsuite/gas/xtensa/trampoline.s b/gas/testsuite/gas/xtensa/trampoline.s
-index 259a3bb..4465786 100644
---- a/gas/testsuite/gas/xtensa/trampoline.s
-+++ b/gas/testsuite/gas/xtensa/trampoline.s
-@@ -19,3 +19,10 @@
- .endr
- 3:
- j 3b
-+ bnez a2, 4f
-+ .rep 50000
-+ and a2, a2, a3
-+ _ret
-+ .endr
-+4:
-+ j 4b
---
-1.8.1.4
-
diff --git a/package/binutils/2.23.2/911-xtensa-fix-localized-symbol-refcounting-with-gc-sect.patch b/package/binutils/2.23.2/911-xtensa-fix-localized-symbol-refcounting-with-gc-sect.patch
deleted file mode 100644
index 9ad6b3b..0000000
--- a/package/binutils/2.23.2/911-xtensa-fix-localized-symbol-refcounting-with-gc-sect.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 8ec76b16f62d1bf386fb2c39af5f66c3afddc5cb Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc@gmail.com>
-Date: Thu, 14 May 2015 05:22:55 +0300
-Subject: [PATCH] xtensa: fix localized symbol refcounting with --gc-sections
-
-elf_xtensa_gc_sweep_hook doesn't correctly unreference symbols that were
-made local, that results in link failure with the following message:
-
- BFD (GNU Binutils) 2.24 internal error, aborting at elf32-xtensa.c line
- 3372 in elf_xtensa_finish_dynamic_sections
-
-elf_xtensa_gc_sweep_hook determines symbol reference type (PLT or GOT) by
-relocation type. Relocation types are not changed when symbol becomes
-local, but its PLT references are added to GOT references and
-plt.refcount is set to 0. Such symbol cannot be unreferences in the
-elf_xtensa_gc_sweep_hook and its extra references make calculated GOT
-relocations section size not match number of GOT relocations.
-
-Fix it by treating PLT reference as GOT reference when plt.refcount is
-not positive.
-
-2015-05-14 Max Filippov <jcmvbkbc@gmail.com>
-bfd/
- * elf32-xtensa.c (elf_xtensa_gc_sweep_hook): Treat PLT reference
- as GOT reference when plt.refcount is not positive.
-
-Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
----
-Backported from: e6c9a083ec5ae7a45bd71682b26aae1939849388
-Changes to ChangeLog are dropped.
-
- bfd/elf32-xtensa.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
-diff --git a/bfd/elf32-xtensa.c b/bfd/elf32-xtensa.c
-index 53af1c6..2523670 100644
---- a/bfd/elf32-xtensa.c
-+++ b/bfd/elf32-xtensa.c
-@@ -1360,10 +1360,14 @@ elf_xtensa_gc_sweep_hook (bfd *abfd,
- {
- if (is_plt)
- {
-+ /* If the symbol has been localized its plt.refcount got moved
-+ to got.refcount. Handle it as GOT. */
- if (h->plt.refcount > 0)
- h->plt.refcount--;
-+ else
-+ is_got = TRUE;
- }
-- else if (is_got)
-+ if (is_got)
- {
- if (h->got.refcount > 0)
- h->got.refcount--;
---
-1.8.1.4
-
diff --git a/package/binutils/2.23.2/912-xtensa-fix-gas-segfault-with-text-section-literals.patch b/package/binutils/2.23.2/912-xtensa-fix-gas-segfault-with-text-section-literals.patch
deleted file mode 100644
index 4a3de2c..0000000
--- a/package/binutils/2.23.2/912-xtensa-fix-gas-segfault-with-text-section-literals.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 2d0522e76e4afeeb2e104e0a4332d94fa0d2fbf6 Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc@gmail.com>
-Date: Sun, 17 May 2015 06:46:15 +0300
-Subject: [PATCH] xtensa: fix gas segfault with --text-section-literals
-
-When --text-section-literals is used and code in the .init or .fini
-emits literal in the absence of .literal_position, xtensa_move_literals
-segfaults.
-
-Check that search_frag is non-NULL in the xtensa_move_literals and
-report error otherwise.
-
-2015-05-26 Max Filippov <jcmvbkbc@gmail.com>
-gas/
- * config/tc-xtensa.c (xtensa_move_literals): Check that
- search_frag is non-NULL. Report error if literal frag is not
- found.
-
-Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
----
-Backported from: 4de0562a4c69fef4952aa7e19d7bda359f02e8b4
-Changes to ChangeLog are dropped.
-
- gas/config/tc-xtensa.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
-diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c
-index 31c0b6b..18307c1 100644
---- a/gas/config/tc-xtensa.c
-+++ b/gas/config/tc-xtensa.c
-@@ -10808,13 +10808,21 @@ xtensa_move_literals (void)
- frchain_to = NULL;
- frag_splice = &(frchain_from->frch_root);
-
-- while (!search_frag->tc_frag_data.literal_frag)
-+ while (search_frag && !search_frag->tc_frag_data.literal_frag)
- {
- gas_assert (search_frag->fr_fix == 0
- || search_frag->fr_type == rs_align);
- search_frag = search_frag->fr_next;
- }
-
-+ if (!search_frag)
-+ {
-+ search_frag = frchain_from->frch_root;
-+ as_bad_where (search_frag->fr_file, search_frag->fr_line,
-+ _("literal pool location required for text-section-literals; specify with .literal_position"));
-+ continue;
-+ }
-+
- gas_assert (search_frag->tc_frag_data.literal_frag->fr_subtype
- == RELAX_LITERAL_POOL_BEGIN);
- xtensa_switch_section_emit_state (&state, segment->seg, 0);
---
-1.8.1.4
-
diff --git a/package/binutils/2.23.2/914-xtensa-fix-signedness-of-gas-relocations.patch b/package/binutils/2.23.2/914-xtensa-fix-signedness-of-gas-relocations.patch
deleted file mode 100644
index 2955e11..0000000
--- a/package/binutils/2.23.2/914-xtensa-fix-signedness-of-gas-relocations.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 6c7c5c477ef9ccf2d2548cf2ac3cec9bd3c9c5b6 Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc@gmail.com>
-Date: Tue, 2 Feb 2016 17:11:38 +0300
-Subject: [PATCH] xtensa: fix signedness of gas relocations
-
-Change 1058c7532d0b "Use signed data type for R_XTENSA_DIFF* relocation
-offsets." changed signedness of BFD_RELOC_XTENSA_DIFF* relocations
-substituted for BFD_RELOC_*. This made it impossible to encode arbitrary
-8-, 16- and 32-bit values, which broke e.g. debug info encoding by .loc
-directive. Revert this part and add test.
-
-gas/
-2016-02-03 Max Filippov <jcmvbkbc@gmail.com>
- * config/tc-xtensa.c (md_apply_fix): Mark BFD_RELOC_XTENSA_DIFF*
- substitutions for BFD_RELOC_* as unsigned.
-
-Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
----
- gas/config/tc-xtensa.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c
-index a119871..36a06cc 100644
---- a/gas/config/tc-xtensa.c
-+++ b/gas/config/tc-xtensa.c
-@@ -5961,15 +5961,15 @@ md_apply_fix (fixS *fixP, valueT *valP, segT seg)
- {
- case BFD_RELOC_8:
- fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF8;
-- fixP->fx_signed = 1;
-+ fixP->fx_signed = 0;
- break;
- case BFD_RELOC_16:
- fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF16;
-- fixP->fx_signed = 1;
-+ fixP->fx_signed = 0;
- break;
- case BFD_RELOC_32:
- fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF32;
-- fixP->fx_signed = 1;
-+ fixP->fx_signed = 0;
- break;
- default:
- break;
---
-2.1.4
-
diff --git a/package/binutils/2.23.2/915-xtensa-fix-.init-.fini-literals-moving.patch b/package/binutils/2.23.2/915-xtensa-fix-.init-.fini-literals-moving.patch
deleted file mode 100644
index 4bdd8a0..0000000
--- a/package/binutils/2.23.2/915-xtensa-fix-.init-.fini-literals-moving.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 7db2accc3fdea0aaa0c3a76a413d8e8030e022c3 Mon Sep 17 00:00:00 2001
-From: Max Filippov <jcmvbkbc@gmail.com>
-Date: Tue, 16 Feb 2016 02:23:28 +0300
-Subject: [PATCH] xtensa: fix .init/.fini literals moving
-
-Despite the documentation and the comment in xtensa_move_literals, in
-the presence of --text-section-literals and --auto-litpools literals are
-moved from the separate literal sections into .init and .fini, because
-the check in the xtensa_move_literals is incorrect.
-
-This moving was broken with introduction of auto litpools: some literals
-now may be lost. This happens because literal frags emitted from .init
-and .fini are not closed when new .literal_position marks new literal
-pool. Then frag_align(2, 0, 0) changes type of the last literal frag to
-rs_align. rs_align frags are skipped in the xtensa_move_literals. As a
-result fixups against such literals are not moved out of .init.literal/
-.fini.literal sections producing the following assembler error:
-
- test.S: Warning: fixes not all moved from .init.literal
- test.S: Internal error!
-
-Fix check for .init.literal/.fini.literal in the xtensa_move_literals
-and don't let it move literals from there in the presence of
---text-section-literals or --auto-litpools.
-
-2016-02-17 Max Filippov <jcmvbkbc@gmail.com>
-gas/
- * config/tc-xtensa.c (xtensa_move_literals): Fix check for
- .init.literal/.fini.literal section name.
-
-Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
----
-Backported from: 4111950f363221c4641dc2f33bea61cc94f34906
-
- gas/config/tc-xtensa.c | 12 ++++++++++--
- 1 file changed, 19 insertions(+), 2 deletions(-)
-
-diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c
-index 36a06cc..5773634 100644
---- a/gas/config/tc-xtensa.c
-+++ b/gas/config/tc-xtensa.c
-@@ -10625,5 +10625,9 @@ xtensa_move_literals (void)
- fixS *fix, *next_fix, **fix_splice;
- sym_list *lit;
-+ const char *init_name = INIT_SECTION_NAME;
-+ const char *fini_name = FINI_SECTION_NAME;
-+ int init_name_len = strlen(init_name);
-+ int fini_name_len = strlen(fini_name);
-
- mark_literal_frags (literal_head->next);
-
-@@ -10632,9 +10636,13 @@ xtensa_move_literals (void)
-
- for (segment = literal_head->next; segment; segment = segment->next)
- {
-+ const char *seg_name = segment_name (segment->seg);
-+
- /* Keep the literals for .init and .fini in separate sections. */
-- if (!strcmp (segment_name (segment->seg), INIT_SECTION_NAME)
-- || !strcmp (segment_name (segment->seg), FINI_SECTION_NAME))
-+ if ((!memcmp (seg_name, init_name, init_name_len) &&
-+ !strcmp (seg_name + init_name_len, ".literal")) ||
-+ (!memcmp (seg_name, fini_name, fini_name_len) &&
-+ !strcmp (seg_name + fini_name_len, ".literal")))
- continue;
-
- frchain_from = seg_info (segment->seg)->frchainP;
---
-2.1.4
-
diff --git a/package/binutils/Config.in.host b/package/binutils/Config.in.host
index e42918e..b1389fe 100644
--- a/package/binutils/Config.in.host
+++ b/package/binutils/Config.in.host
@@ -7,15 +7,6 @@ choice
help
Select the version of binutils you wish to use.
- config BR2_BINUTILS_VERSION_2_23_X
- depends on !BR2_aarch64 && !BR2_microblaze && \
- !BR2_powerpc64le && !BR2_nios2
- # Unsupported for MIPS R6
- depends on !BR2_mips_32r6 && !BR2_mips_64r6
- # Unsupported ARM cores
- depends on !BR2_cortex_a17
- bool "binutils 2.23.2"
-
config BR2_BINUTILS_VERSION_2_24_X
# supported, but broken on Nios-II and powerpc64le
depends on !BR2_nios2 && !BR2_powerpc64le
@@ -36,7 +27,6 @@ endchoice
config BR2_BINUTILS_VERSION
string
default "arc-2015.12" if BR2_arc
- default "2.23.2" if BR2_BINUTILS_VERSION_2_23_X
default "2.24" if BR2_BINUTILS_VERSION_2_24_X
default "2.25.1" if BR2_BINUTILS_VERSION_2_25_X
default "2.26" if BR2_BINUTILS_VERSION_2_26_X
diff --git a/package/binutils/binutils.hash b/package/binutils/binutils.hash
index 916b68c..c8b3114 100644
--- a/package/binutils/binutils.hash
+++ b/package/binutils/binutils.hash
@@ -1,5 +1,4 @@
# From ftp://gcc.gnu.org/pub/binutils/releases/sha512.sum
-sha512 dec753bbba008f1526b89cf1bd85feba78f362f5333ffdf93953fd131eb755976dec82a0a4ba38c43d2434da007137780cfe674de5414be5cf7ce7fbc6af6d16 binutils-2.23.2.tar.bz2
sha512 5ec95ad47d49b12c4558a8db0ca2109d3ee1955e3776057f3330c4506f8f4d1cf5e505fbf8a16b98403a0fcdeaaf986fe0a22be6456247dbdace63ce1f776b12 binutils-2.24.tar.bz2
sha512 0b36dda0e6d32cd25613c0e64b56b28312515c54d6a159efd3db9a86717f114ab0a0a1f69d08975084d55713ebaeab64e4085c9b3d1c3fa86712869f80eb954d binutils-2.25.1.tar.bz2
sha512 e77e1b8dbbcbaf9ac2fae95c4403615808af3be03b2e1d32448cd3a7d32c43273f8bcace3f2de84ec120a982879295673029da306e2885dbf5f990584932cfc7 binutils-2.26.tar.bz2
--
2.6.4
^ permalink raw reply related [flat|nested] 5+ messages in thread