[Buildroot] Build instructions for ARM big-endian BE-8 target

[Buildroot] Build instructions for ARM big-endian BE-8 target

[Gopu Subramanian]

Hi,
Right now ARM big endian selection produces a toolchain for ARM big-endian BE-32 target systems. Please provide us the instructions to build ARM big-endian BE-8 system.

Thanks and Regards,
Gopu


      Explore and discover exciting holidays and getaways with Yahoo! India Travel http://in.travel.yahoo.com/

[Buildroot] Build instructions for ARM big-endian BE-8 target

[Peter Korsgaard]

>>>>> "Gopu" == Gopu Subramanian <sgopu@yahoo.com> writes:

 Gopu> Hi,

 Gopu> Right now ARM big endian selection produces a toolchain for ARM
 Gopu> big-endian BE-32 target systems. Please provide us the
 Gopu> instructions to build ARM big-endian BE-8 system.

BE-32? BE-8? What are you talking about? Please be more specific.

-- 
Bye, Peter Korsgaard

[Buildroot] Build instructions for ARM big-endian BE-8 target

[Paul Archer]

I guess

BE-8 = Big Endian 8 bit instructions
BE-32 = Big Endian 32 bit instructions...

Regards Paul

On Fri, Jun 5, 2009 at 5:27 PM, Peter Korsgaard<jacmet@uclibc.org> wrote:
>>>>>> "Gopu" == Gopu Subramanian <sgopu@yahoo.com> writes:
>
> ?Gopu> Hi,
>
> ?Gopu> Right now ARM big endian selection produces a toolchain for ARM
> ?Gopu> big-endian BE-32 target systems. Please provide us the
> ?Gopu> instructions to build ARM big-endian BE-8 system.
>
> BE-32? BE-8? What are you talking about? Please be more specific.
>
> --
> Bye, Peter Korsgaard
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>



-- 
----
Regards
Paul Archer
ptarcher at gmail.com

[Buildroot] Build instructions for ARM big-endian BE-8 target

[Peter Korsgaard]

>>>>> "Paul" == Paul Archer <ptarcher@gmail.com> writes:

 Paul> I guess
 Paul> BE-8 = Big Endian 8 bit instructions
 Paul> BE-32 = Big Endian 32 bit instructions...

That doesn't make much sense. ARM instructions are 32bit (except for
thumb) and you cannot talk about endianess on byte values.

-- 
Bye, Peter Korsgaard

[Buildroot] Build instructions for ARM big-endian BE-8 target

[Gopu Subramanian]

I am trying to build big-endian tool chain for ARM v6 architecture (ARM 11MPCore) and it should BE-8 format. In BE-8, instructions should be in little-endian. I want the instructions for BE-8 toolchain.

I hope this helps.

Thanks 
Gopu

--- On Fri, 5/6/09, Paul Archer <ptarcher@gmail.com> wrote:

> From: Paul Archer <ptarcher@gmail.com>
> Subject: Re: [Buildroot] Build instructions for ARM big-endian BE-8 target
> To: "Peter Korsgaard" <jacmet@uclibc.org>
> Cc: sgopu at yahoo.com, buildroot at busybox.net
> Date: Friday, 5 June, 2009, 1:33 PM
> I guess
> 
> BE-8 = Big Endian 8 bit instructions
> BE-32 = Big Endian 32 bit instructions...
> 
> Regards Paul
> 
> On Fri, Jun 5, 2009 at 5:27 PM, Peter Korsgaard<jacmet@uclibc.org>
> wrote:
> >>>>>> "Gopu" == Gopu Subramanian <sgopu@yahoo.com>
> writes:
> >
> > ?Gopu> Hi,
> >
> > ?Gopu> Right now ARM big endian selection produces
> a toolchain for ARM
> > ?Gopu> big-endian BE-32 target systems. Please
> provide us the
> > ?Gopu> instructions to build ARM big-endian BE-8
> system.
> >
> > BE-32? BE-8? What are you talking about? Please be
> more specific.
> >
> > --
> > Bye, Peter Korsgaard
> > _______________________________________________
> > buildroot mailing list
> > buildroot at busybox.net
> > http://lists.busybox.net/mailman/listinfo/buildroot
> >
> 
> 
> 
> -- 
> ----
> Regards
> Paul Archer
> ptarcher at gmail.com
> 


      Cricket on your mind? Visit the ultimate cricket website. Enter http://beta.cricket.yahoo.com

[Buildroot] Build instructions for ARM big-endian BE-8 target

[Gopu Subramanian]

I am trying to build big-endian tool chain for ARM v6 architecture (ARM 11MPCore) and it should BE-8 format. In BE-8, instructions should be in little-endian. I want the instructions for BE-8 toolchain.

I hope this helps.

Thanks 
Gopu

--- On Fri, 5/6/09, Peter Korsgaard <jacmet@uclibc.org> wrote:

> From: Peter Korsgaard <jacmet@uclibc.org>
> Subject: Re: [Buildroot] Build instructions for ARM big-endian BE-8 target
> To: "Paul Archer" <ptarcher@gmail.com>
> Cc: "Peter Korsgaard" <jacmet@uclibc.org>, sgopu at yahoo.com, buildroot at busybox.net
> Date: Friday, 5 June, 2009, 2:05 PM
> >>>>> "Paul" == Paul
> Archer <ptarcher@gmail.com>
> writes:
> 
>  Paul> I guess
>  Paul> BE-8 = Big Endian 8 bit instructions
>  Paul> BE-32 = Big Endian 32 bit instructions...
> 
> That doesn't make much sense. ARM instructions are 32bit
> (except for
> thumb) and you cannot talk about endianess on byte values.
> 
> -- 
> Bye, Peter Korsgaard
> 


      Cricket on your mind? Visit the ultimate cricket website. Enter http://beta.cricket.yahoo.com

[Buildroot] Build instructions for ARM big-endian BE-8 target

[Peter Korsgaard]

>>>>> "Gopu" == Gopu Subramanian <sgopu@yahoo.com> writes:

Hi,

 Gopu> I am trying to build big-endian tool chain for ARM v6
 Gopu> architecture (ARM 11MPCore) and it should BE-8 format. In BE-8,
 Gopu> instructions should be in little-endian. I want the
 Gopu> instructions for BE-8 toolchain.

Ahh, wasn't aware of the funky BE8 format, but after a bit of
googling around it seems to just be a matter of adding --be8 to the
the TARGET_CFLAGS.

Could you try adding it to line 40 of package/Makefile.in and give it
a try?

-- 
Bye, Peter Korsgaard