Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [PATCH] board: add Orangepi Zero3 support
@ 2023-09-16 10:46 Marcin Niestroj
  2023-09-17 17:52 ` Sergey Kuzminov
  0 siblings, 1 reply; 3+ messages in thread
From: Marcin Niestroj @ 2023-09-16 10:46 UTC (permalink / raw)
  To: buildroot; +Cc: Marcin Niestroj, Sergey Matyukevich

Add initial support for Orangepi Zero3 board:
- U-Boot 2021.07 fork by Orangepi
- Linux 6.1.31 fork by Orangepi
- Default packages from buildroot

Enable CONFIG_MFD_AC200 as it is used directly by other module,
resulting in build failure when disabled.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
---
 board/orangepi/orangepi-zero3/linux.config |  1 +
 board/orangepi/orangepi-zero3/readme.txt   | 34 +++++++++++++
 configs/orangepi_zero3_defconfig           | 56 ++++++++++++++++++++++
 3 files changed, 91 insertions(+)
 create mode 100644 board/orangepi/orangepi-zero3/linux.config
 create mode 100644 board/orangepi/orangepi-zero3/readme.txt
 create mode 100644 configs/orangepi_zero3_defconfig

diff --git a/board/orangepi/orangepi-zero3/linux.config b/board/orangepi/orangepi-zero3/linux.config
new file mode 100644
index 0000000000..09b7a93a5a
--- /dev/null
+++ b/board/orangepi/orangepi-zero3/linux.config
@@ -0,0 +1 @@
+CONFIG_MFD_AC200=y
diff --git a/board/orangepi/orangepi-zero3/readme.txt b/board/orangepi/orangepi-zero3/readme.txt
new file mode 100644
index 0000000000..4872a363e7
--- /dev/null
+++ b/board/orangepi/orangepi-zero3/readme.txt
@@ -0,0 +1,34 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi Zero3. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi Zero3 link:
+http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html
+
+This configuration uses Orangepi's fork of U-Boot and Linux kernel.
+
+How to build
+============
+
+    $ make orangepi_zero3_defconfig
+    $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+  $ sudo sync
+
+Insert the micro SDcard in your Orangepi Zero3 and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_zero3_defconfig b/configs/orangepi_zero3_defconfig
new file mode 100644
index 0000000000..e88e4a9fd8
--- /dev/null
+++ b/configs/orangepi_zero3_defconfig
@@ -0,0 +1,56 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
+BR2_SYSTEM_DHCP="eth0"
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.9"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_h616"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,orangepi-xunlong,u-boot-orangepi,6fe17fac388aad17490cf386578b7532975e567f)/u-boot-orangepi-6fe17fac388aad17490cf386578b7532975e567f.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero3"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,orangepi-xunlong,linux-orangepi,3495b5ee0594566c9fed930b96b1cae90600412e)/linux-orangepi-3495b5ee0594566c9fed930b96b1cae90600412e.tar.gz"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h616-orangepi-zero3"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-zero3/linux.config"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero3"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+
+# host tools
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+
+# image scripts
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/common/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg"
-- 
2.42.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-09-18  6:54 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-09-16 10:46 [Buildroot] [PATCH] board: add Orangepi Zero3 support Marcin Niestroj
2023-09-17 17:52 ` Sergey Kuzminov
2023-09-18  6:51   ` Marcin Niestrój

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox